-- Logs begin at Thu 2019-02-14 13:12:00 MSK, end at Sun 2024-04-28 20:54:08 MSK. -- Apr 28 20:53:20 volumio kernel: hub 2-0:1.0: 4 ports detected Apr 28 20:53:20 volumio kernel: dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Apr 28 20:53:20 volumio kernel: dwc_otg: FIQ enabled Apr 28 20:53:20 volumio kernel: dwc_otg: NAK holdoff enabled Apr 28 20:53:20 volumio kernel: dwc_otg: FIQ split-transaction FSM enabled Apr 28 20:53:20 volumio kernel: Module dwc_common_port init Apr 28 20:53:20 volumio kernel: usbcore: registered new interface driver uas Apr 28 20:53:20 volumio kernel: usbcore: registered new interface driver usb-storage Apr 28 20:53:20 volumio kernel: mousedev: PS/2 mouse device common for all mice Apr 28 20:53:20 volumio kernel: sdhci: Secure Digital Host Controller Interface driver Apr 28 20:53:20 volumio kernel: sdhci: Copyright(c) Pierre Ossman Apr 28 20:53:20 volumio kernel: sdhci-pltfm: SDHCI platform and OF driver helper Apr 28 20:53:20 volumio kernel: ledtrig-cpu: registered to indicate activity on CPUs Apr 28 20:53:20 volumio kernel: hid: raw HID events driver (C) Jiri Kosina Apr 28 20:53:20 volumio kernel: usbcore: registered new interface driver usbhid Apr 28 20:53:20 volumio kernel: usbhid: USB HID core driver Apr 28 20:53:20 volumio kernel: Initializing XFRM netlink socket Apr 28 20:53:20 volumio kernel: NET: Registered PF_PACKET protocol family Apr 28 20:53:20 volumio kernel: Key type dns_resolver registered Apr 28 20:53:20 volumio kernel: Registering SWP/SWPB emulation handler Apr 28 20:53:20 volumio kernel: registered taskstats version 1 Apr 28 20:53:20 volumio kernel: Loading compiled-in X.509 certificates Apr 28 20:53:20 volumio kernel: Key type .fscrypt registered Apr 28 20:53:20 volumio kernel: Key type fscrypt-provisioning registered Apr 28 20:53:20 volumio kernel: uart-pl011 fe201000.serial: there is not valid maps for state default Apr 28 20:53:20 volumio kernel: uart-pl011 fe201000.serial: cts_event_workaround enabled Apr 28 20:53:20 volumio kernel: fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 51, base_baud = 0) is a PL011 rev2 Apr 28 20:53:20 volumio kernel: serial serial0: tty port ttyAMA1 registered Apr 28 20:53:20 volumio kernel: bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer Apr 28 20:53:20 volumio kernel: bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver Apr 28 20:53:20 volumio kernel: mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 Apr 28 20:53:20 volumio kernel: mmc-bcm2835 fe300000.mmcnr: DMA channel allocated Apr 28 20:53:20 volumio kernel: of_cfs_init Apr 28 20:53:20 volumio kernel: of_cfs_init: OK Apr 28 20:53:20 volumio kernel: mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA Apr 28 20:53:20 volumio kernel: Freeing unused kernel image (initmem) memory: 2048K Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #1 Apr 28 20:53:20 volumio kernel: mmc0: new high speed SDHC card at address 21e3 Apr 28 20:53:20 volumio kernel: mmcblk0: mmc0:21e3 APPSD 14.8 GiB Apr 28 20:53:20 volumio kernel: mmcblk0: p1 p2 p3 Apr 28 20:53:20 volumio kernel: mmcblk0: mmc0:21e3 APPSD 14.8 GiB Apr 28 20:53:20 volumio kernel: Run /init as init process Apr 28 20:53:20 volumio kernel: with arguments: Apr 28 20:53:20 volumio kernel: /init Apr 28 20:53:20 volumio kernel: splash Apr 28 20:53:20 volumio kernel: with environment: Apr 28 20:53:20 volumio kernel: HOME=/ Apr 28 20:53:20 volumio kernel: TERM=linux Apr 28 20:53:20 volumio kernel: imgpart=/dev/mmcblk0p2 Apr 28 20:53:20 volumio kernel: imgfile=/volumio_current.sqsh Apr 28 20:53:20 volumio kernel: bootdelay=5 Apr 28 20:53:20 volumio kernel: mmc1: new high speed SDIO card at address 0001 Apr 28 20:53:20 volumio kernel: usb 1-1: new high-speed USB device number 2 using xhci_hcd Apr 28 20:53:20 volumio initramfs: Booting Volumio for BCM2711 Apr 28 20:53:20 volumio initramfs: This script mounts rootfs RO with an overlay RW layer. Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #1 Apr 28 20:53:20 volumio kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Apr 28 20:53:20 volumio initramfs: IMGPART=/dev/mmcblk0p2 Apr 28 20:53:20 volumio initramfs: IMGFILE=/volumio_current.sqsh Apr 28 20:53:20 volumio initramfs: Boot delay (except first time) will be 5 seconds Apr 28 20:53:20 volumio initramfs: /dev/mmcblk0p2: Apr 28 20:53:20 volumio kernel: usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 Apr 28 20:53:20 volumio kernel: usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Apr 28 20:53:20 volumio kernel: usb 1-1: Product: USB2.0 Hub Apr 28 20:53:20 volumio kernel: hub 1-1:1.0: USB hub found Apr 28 20:53:20 volumio kernel: hub 1-1:1.0: 4 ports detected Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #1 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #1 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #1 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #1 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #2 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #1 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #2 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #1 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #2 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #2 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #2 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #2 Apr 28 20:53:20 volumio kernel: EXT4-fs (mmcblk0p2): recovery complete Apr 28 20:53:20 volumio kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. Apr 28 20:53:20 volumio initramfs: Doing a 5 second delay here to give kernel load a headstart Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #3 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #2 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #3 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #2 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #3 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #3 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #3 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #3 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #4 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #3 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #4 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #3 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #4 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #4 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #4 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #4 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #5 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #4 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #5 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #4 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #5 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #5 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #5 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #5 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #6 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #5 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #6 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #5 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #6 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #6 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #6 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #6 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #7 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #6 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #7 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #6 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #7 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #7 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #7 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #7 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #8 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #7 Apr 28 20:53:20 volumio initramfs: Checking for USB updates Apr 28 20:53:20 volumio initramfs: No USB device detected (when incorrect, try adding 'bootdelay=5' to your boot cmdline) Apr 28 20:53:20 volumio kernel: loop0: detected capacity change from 0 to 967536 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #8 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #7 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #8 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #8 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #8 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #8 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #9 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #8 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #9 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #8 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #9 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #9 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #9 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #9 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #10 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #9 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #10 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #9 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #10 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #10 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #10 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #10 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #11 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #10 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #11 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #10 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #11 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #11 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #11 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #11 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #12 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #11 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #12 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #11 Apr 28 20:53:20 volumio kernel: EXT4-fs (mmcblk0p3): recovery complete Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #12 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #12 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #12 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #12 Apr 28 20:53:20 volumio kernel: EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. Apr 28 20:53:20 volumio initramfs: With Option: Apr 28 20:53:20 volumio initramfs: VOLUMIO_VERSION="3.631" Apr 28 20:53:20 volumio initramfs: Finish initramfs, continue booting Volumio Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #13 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #12 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #13 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #12 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #13 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #13 Apr 28 20:53:20 volumio systemd[1]: System time before build time, advancing clock. Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #13 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #13 Apr 28 20:53:20 volumio kernel: NET: Registered PF_INET6 protocol family Apr 28 20:53:20 volumio kernel: Segment Routing with IPv6 Apr 28 20:53:20 volumio kernel: In-situ OAM (IOAM) with IPv6 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #14 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #13 Apr 28 20:53:20 volumio systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) Apr 28 20:53:20 volumio systemd[1]: Detected architecture arm. Apr 28 20:53:20 volumio systemd[1]: Set hostname to . Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #14 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #13 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #14 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #14 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #14 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #14 Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #15 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #14 Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #15 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #14 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #15 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #15 Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #15 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #15 Apr 28 20:53:20 volumio systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly. Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #16 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #15 Apr 28 20:53:20 volumio systemd[1]: Created slice system-getty.slice. Apr 28 20:53:20 volumio systemd[1]: Listening on udev Kernel Socket. Apr 28 20:53:20 volumio systemd[1]: Created slice system-systemd\x2dfsck.slice. Apr 28 20:53:20 volumio systemd[1]: Listening on fsck to fsckd communication Socket. Apr 28 20:53:20 volumio systemd[1]: Listening on Journal Socket (/dev/log). Apr 28 20:53:20 volumio systemd[1]: Listening on initctl Compatibility Named Pipe. Apr 28 20:53:20 volumio kernel: i2c_dev: i2c /dev entries driver Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #16 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #15 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #16 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #16 Apr 28 20:53:20 volumio systemd-journald[206]: Journal started Apr 28 20:53:20 volumio systemd-journald[206]: Runtime journal (/run/log/journal/5eaf926312f0e417cf8895cd65aaae4f) is 7.5M, max 30.0M, 22.5M free. Apr 28 20:53:20 volumio systemd-modules-load[196]: Inserted module 'i2c_dev' Apr 28 20:53:20 volumio systemd[1]: Mounted Kernel Configuration File System. Apr 28 20:53:20 volumio fake-hwclock[207]: Sun Apr 28 17:53:20 UTC 2024 Apr 28 20:53:20 volumio systemd[1]: Started Load/Save Random Seed. Apr 28 20:53:20 volumio systemd[1]: Started Apply Kernel Variables. Apr 28 20:53:20 volumio systemd[1]: dynamicswap.service: Succeeded. Apr 28 20:53:20 volumio systemd[1]: Started Create System Users. Apr 28 20:53:20 volumio kernel: usb usb2-port4: over-current change #16 Apr 28 20:53:20 volumio kernel: usb 1-1-port2: over-current change #16 Apr 28 20:53:20 volumio systemd[1]: Starting Create Static Device Nodes in /dev... Apr 28 20:53:20 volumio systemd[1]: Started udev Coldplug all Devices. Apr 28 20:53:20 volumio systemd[1]: Starting Helper to synchronize boot up for ifupdown... Apr 28 20:53:20 volumio systemd[1]: Started Helper to synchronize boot up for ifupdown. Apr 28 20:53:20 volumio systemd[1]: Started Create Static Device Nodes in /dev. Apr 28 20:53:20 volumio systemd[1]: Reached target Local File Systems (Pre). Apr 28 20:53:20 volumio systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. Apr 28 20:53:20 volumio systemd[1]: Mounting /var/log... Apr 28 20:53:20 volumio systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. Apr 28 20:53:20 volumio systemd[1]: Mounting /tmp... Apr 28 20:53:20 volumio systemd[1]: Mounting /var/spool/cups... Apr 28 20:53:20 volumio systemd[1]: Starting udev Kernel Device Manager... Apr 28 20:53:20 volumio systemd[1]: Mounted /var/log. Apr 28 20:53:20 volumio systemd[1]: Mounted /tmp. Apr 28 20:53:20 volumio systemd[1]: Mounted /var/spool/cups. Apr 28 20:53:20 volumio systemd[1]: Mounting /var/spool/cups/tmp... Apr 28 20:53:20 volumio systemd[1]: Starting Flush Journal to Persistent Storage... Apr 28 20:53:20 volumio systemd[1]: Mounted /var/spool/cups/tmp. Apr 28 20:53:20 volumio systemd-udevd[237]: Network interface NamePolicy= disabled on kernel command line, ignoring. Apr 28 20:53:20 volumio systemd-journald[206]: Runtime journal (/run/log/journal/5eaf926312f0e417cf8895cd65aaae4f) is 7.5M, max 30.0M, 22.5M free. Apr 28 20:53:20 volumio systemd[1]: Started Flush Journal to Persistent Storage. Apr 28 20:53:20 volumio kernel: usb usb2-port1: over-current change #17 Apr 28 20:53:20 volumio kernel: usb 1-1-port3: over-current change #16 Apr 28 20:53:20 volumio systemd[1]: Started udev Kernel Device Manager. Apr 28 20:53:20 volumio systemd[1]: Starting Show Plymouth Boot Screen... Apr 28 20:53:20 volumio systemd[1]: Received SIGRTMIN+20 from PID 255 (plymouthd). Apr 28 20:53:20 volumio systemd[1]: Started Show Plymouth Boot Screen. Apr 28 20:53:20 volumio systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. Apr 28 20:53:20 volumio systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Apr 28 20:53:20 volumio systemd[1]: Reached target Paths. Apr 28 20:53:20 volumio systemd[1]: Reached target Local Encrypted Volumes. Apr 28 20:53:20 volumio kernel: usb usb2-port2: over-current change #17 Apr 28 20:53:20 volumio kernel: usb 1-1-port4: over-current change #16 Apr 28 20:53:20 volumio systemd-udevd[249]: Using default interface naming scheme 'v240'. Apr 28 20:53:20 volumio systemd-udevd[249]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Apr 28 20:53:20 volumio kernel: vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:20 volumio kernel: bcm2835_vc_sm_cma_probe: Videocore shared memory driver Apr 28 20:53:20 volumio kernel: [vc_sm_connected_init]: start Apr 28 20:53:20 volumio kernel: mc: Linux media interface: v0.10 Apr 28 20:53:20 volumio kernel: [vc_sm_connected_init]: installed successfully Apr 28 20:53:20 volumio kernel: rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000 Apr 28 20:53:20 volumio kernel: rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem Apr 28 20:53:20 volumio kernel: videodev: Linux video capture interface: v2.00 Apr 28 20:53:20 volumio kernel: usb usb2-port3: over-current change #17 Apr 28 20:53:20 volumio kernel: usb 1-1-port1: over-current change #17 Apr 28 20:53:21 volumio kernel: bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:21 volumio kernel: bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:21 volumio kernel: bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:21 volumio kernel: bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:21 volumio kernel: bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video10 Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 decode Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register output node 0 with media controller Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 1 with media controller Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 2 with media controller Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 3 with media controller Apr 28 20:53:21 volumio kernel: rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video11 Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 encode Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video12 Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 isp Apr 28 20:53:21 volumio kernel: rpivid feb10000.codec: Device registered as /dev/video19 Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video18 Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video31 Apr 28 20:53:21 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register output node 0 with media controller Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 1 with media controller Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 2 with media controller Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 3 with media controller Apr 28 20:53:21 volumio kernel: bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp Apr 28 20:53:21 volumio kernel: usb 1-1-port2: over-current change #17 Apr 28 20:53:21 volumio kernel: usb usb2-port1: over-current change #18 Apr 28 20:53:21 volumio systemd[1]: Found device /dev/mmcblk0p1. Apr 28 20:53:21 volumio kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Apr 28 20:53:21 volumio kernel: usb usb2-port2: over-current change #18 Apr 28 20:53:21 volumio kernel: usb 1-1-port3: over-current change #17 Apr 28 20:53:21 volumio kernel: cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' Apr 28 20:53:21 volumio kernel: cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' Apr 28 20:53:21 volumio kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Apr 28 20:53:22 volumio kernel: Bluetooth: Core ver 2.22 Apr 28 20:53:22 volumio kernel: NET: Registered PF_BLUETOOTH protocol family Apr 28 20:53:22 volumio kernel: Bluetooth: HCI device and connection manager initialized Apr 28 20:53:22 volumio kernel: Bluetooth: HCI socket layer initialized Apr 28 20:53:22 volumio kernel: Bluetooth: L2CAP socket layer initialized Apr 28 20:53:22 volumio kernel: Bluetooth: SCO socket layer initialized Apr 28 20:53:22 volumio kernel: snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. Apr 28 20:53:22 volumio kernel: snd_bcm2835: unknown parameter 'enable_compat_alsa' ignored Apr 28 20:53:22 volumio kernel: bcm2835_audio bcm2835_audio: card created with 4 channels Apr 28 20:53:22 volumio kernel: bcm2835_audio bcm2835_audio: card created with 4 channels Apr 28 20:53:22 volumio kernel: usb usb2-port3: over-current change #18 Apr 28 20:53:22 volumio kernel: usb 1-1-port4: over-current change #17 Apr 28 20:53:22 volumio systemd-udevd[241]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Apr 28 20:53:22 volumio kernel: Bluetooth: HCI UART driver ver 2.3 Apr 28 20:53:22 volumio kernel: Bluetooth: HCI UART protocol H4 registered Apr 28 20:53:22 volumio kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered Apr 28 20:53:22 volumio kernel: Bluetooth: HCI UART protocol Broadcom registered Apr 28 20:53:22 volumio kernel: hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator Apr 28 20:53:22 volumio kernel: hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator Apr 28 20:53:22 volumio kernel: brcmfmac: F1 signature read @0x18000000=0x15264345 Apr 28 20:53:22 volumio kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Apr 28 20:53:22 volumio kernel: usbcore: registered new interface driver brcmfmac Apr 28 20:53:22 volumio kernel: uart-pl011 fe201000.serial: no DMA platform data Apr 28 20:53:22 volumio kernel: usb usb2-port4: over-current change #17 Apr 28 20:53:22 volumio kernel: usb 1-1-port1: over-current change #18 Apr 28 20:53:22 volumio kernel: Bluetooth: hci0: BCM: chip id 107 Apr 28 20:53:22 volumio kernel: Bluetooth: hci0: BCM: features 0x2f Apr 28 20:53:22 volumio kernel: Bluetooth: hci0: BCM4345C0 Apr 28 20:53:22 volumio kernel: Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 Apr 28 20:53:22 volumio kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 Apr 28 20:53:22 volumio kernel: usb usb2-port1: over-current change #19 Apr 28 20:53:22 volumio systemd-udevd[240]: Using default interface naming scheme 'v240'. Apr 28 20:53:22 volumio systemd-udevd[240]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Apr 28 20:53:22 volumio kernel: usb usb2-port2: over-current change #19 Apr 28 20:53:22 volumio kernel: usb 1-1-port1: over-current change #19 Apr 28 20:53:23 volumio kernel: usb usb2-port3: over-current change #19 Apr 28 20:53:23 volumio kernel: usb 1-1-port2: over-current change #18 Apr 28 20:53:23 volumio kernel: usb usb2-port4: over-current change #18 Apr 28 20:53:23 volumio kernel: usb 1-1-port3: over-current change #18 Apr 28 20:53:23 volumio kernel: usb usb2-port1: over-current change #20 Apr 28 20:53:23 volumio kernel: usb 1-1-port4: over-current change #18 Apr 28 20:53:23 volumio kernel: usb usb2-port2: over-current change #20 Apr 28 20:53:23 volumio kernel: usb 1-1-port1: over-current change #20 Apr 28 20:53:24 volumio kernel: usb usb2-port3: over-current change #20 Apr 28 20:53:24 volumio kernel: usb 1-1-port2: over-current change #19 Apr 28 20:53:24 volumio kernel: usb usb2-port4: over-current change #19 Apr 28 20:53:24 volumio kernel: usb 1-1-port3: over-current change #19 Apr 28 20:53:24 volumio kernel: usb usb2-port1: over-current change #21 Apr 28 20:53:24 volumio kernel: usb 1-1-port4: over-current change #19 Apr 28 20:53:24 volumio kernel: usb usb2-port2: over-current change #21 Apr 28 20:53:24 volumio kernel: usb 1-1-port1: over-current change #21 Apr 28 20:53:24 volumio kernel: usb usb2-port3: over-current change #21 Apr 28 20:53:25 volumio kernel: usb 1-1-port2: over-current change #20 Apr 28 20:53:25 volumio kernel: usb usb2-port4: over-current change #20 Apr 28 20:53:25 volumio kernel: usb 1-1-port3: over-current change #20 Apr 28 20:53:25 volumio kernel: Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch Apr 28 20:53:25 volumio kernel: usb usb2-port1: over-current change #22 Apr 28 20:53:25 volumio kernel: ieee80211 phy0: brcmf_cfg80211_reg_notifier: Firmware rejected country setting Apr 28 20:53:25 volumio kernel: usb 1-1-port4: over-current change #20 Apr 28 20:53:25 volumio kernel: usb usb2-port2: over-current change #22 Apr 28 20:53:25 volumio kernel: usb 1-1-port1: over-current change #22 Apr 28 20:53:25 volumio kernel: usb usb2-port3: over-current change #22 Apr 28 20:53:25 volumio kernel: usb 1-1-port2: over-current change #21 Apr 28 20:53:26 volumio kernel: Bluetooth: hci0: BCM: features 0x2f Apr 28 20:53:26 volumio kernel: Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ Apr 28 20:53:26 volumio kernel: Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 Apr 28 20:53:26 volumio kernel: usb usb2-port3: over-current condition Apr 28 20:53:26 volumio kernel: usb usb2-port4: over-current change #21 Apr 28 20:53:26 volumio kernel: usb usb2-port1: over-current change #23 Apr 28 20:53:26 volumio kernel: usb 1-1-port1: over-current change #23 Apr 28 20:53:26 volumio systemd[1]: Condition check resulted in /sys/subsystem/net/devices/eth0 being skipped. Apr 28 20:53:26 volumio kernel: usb usb2-port2: over-current change #23 Apr 28 20:53:26 volumio systemd[1]: Condition check resulted in /sys/subsystem/net/devices/wlan0 being skipped. Apr 28 20:53:26 volumio systemd[1]: Created slice system-bthelper.slice. Apr 28 20:53:26 volumio systemd[1]: Condition check resulted in Huge Pages File System being skipped. Apr 28 20:53:26 volumio systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Apr 28 20:53:26 volumio systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Apr 28 20:53:26 volumio systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Apr 28 20:53:26 volumio systemd[1]: Condition check resulted in FUSE Control File System being skipped. Apr 28 20:53:26 volumio systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Apr 28 20:53:26 volumio kernel: usb 1-1-port2: over-current change #22 Apr 28 20:53:26 volumio systemd[1]: Starting File System Check on /dev/mmcblk0p1... Apr 28 20:53:26 volumio systemd[1]: Starting Load/Save RF Kill Switch Status... Apr 28 20:53:26 volumio systemd[1]: Started File System Check Daemon to report status. Apr 28 20:53:26 volumio systemd[1]: Started Load/Save RF Kill Switch Status. Apr 28 20:53:26 volumio systemd-fsck[375]: fsck.fat 4.1 (2017-01-24) Apr 28 20:53:26 volumio systemd-fsck[375]: /dev/mmcblk0p1: 367 files, 33349/46774 clusters Apr 28 20:53:26 volumio systemd[1]: Started File System Check on /dev/mmcblk0p1. Apr 28 20:53:26 volumio systemd[1]: Mounting /boot... Apr 28 20:53:26 volumio kernel: usb usb2-port3: over-current change #23 Apr 28 20:53:26 volumio kernel: usb 1-1-port3: over-current change #21 Apr 28 20:53:26 volumio systemd[1]: Mounted /boot. Apr 28 20:53:26 volumio systemd[1]: Reached target Local File Systems. Apr 28 20:53:27 volumio systemd[1]: Starting Preprocess NFS configuration... Apr 28 20:53:27 volumio systemd[1]: Started ifup for wlan0. Apr 28 20:53:27 volumio systemd[1]: Starting Raise network interfaces... Apr 28 20:53:27 volumio systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. Apr 28 20:53:27 volumio systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... Apr 28 20:53:27 volumio systemd[1]: Starting Create Volatile Files and Directories... Apr 28 20:53:27 volumio systemd[1]: Started ifup for eth0. Apr 28 20:53:27 volumio systemd[1]: plymouth-read-write.service: Succeeded. Apr 28 20:53:27 volumio systemd[1]: Started Tell Plymouth To Write Out Runtime Data. Apr 28 20:53:27 volumio systemd[1]: nfs-config.service: Succeeded. Apr 28 20:53:27 volumio systemd[1]: Started Preprocess NFS configuration. Apr 28 20:53:27 volumio systemd[1]: Received SIGRTMIN+20 from PID 255 (plymouthd). Apr 28 20:53:27 volumio systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. Apr 28 20:53:27 volumio systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped. Apr 28 20:53:27 volumio systemd[1]: Reached target NFS client services. Apr 28 20:53:27 volumio kernel: usb usb2-port4: over-current change #22 Apr 28 20:53:27 volumio kernel: usb 1-1-port4: over-current change #21 Apr 28 20:53:27 volumio systemd[1]: Started Create Volatile Files and Directories. Apr 28 20:53:27 volumio systemd[1]: Condition check resulted in Network Time Synchronization being skipped. Apr 28 20:53:27 volumio systemd[1]: Starting Update UTMP about System Boot/Shutdown... Apr 28 20:53:27 volumio systemd[1]: Started Entropy daemon using the HAVEGE algorithm. Apr 28 20:53:27 volumio systemd[1]: Starting RPC bind portmap service... Apr 28 20:53:27 volumio systemd[1]: Started Update UTMP about System Boot/Shutdown. Apr 28 20:53:27 volumio systemd[1]: Reached target System Initialization. Apr 28 20:53:27 volumio systemd[1]: Started Daily Cleanup of Temporary Directories. Apr 28 20:53:27 volumio systemd[1]: Started Daily apt download activities. Apr 28 20:53:27 volumio systemd[1]: Started Daily apt upgrade and clean activities. Apr 28 20:53:27 volumio systemd[1]: Reached target Timers. Apr 28 20:53:27 volumio kernel: 8021q: 802.1Q VLAN Support v1.8 Apr 28 20:53:27 volumio systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket. Apr 28 20:53:27 volumio kernel: usb usb2-port1: over-current change #24 Apr 28 20:53:27 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Apr 28 20:53:27 volumio systemd[1]: Listening on D-Bus System Message Bus Socket. Apr 28 20:53:27 volumio systemd[1]: Listening on triggerhappy.socket. Apr 28 20:53:27 volumio systemd[1]: Reached target Sockets. Apr 28 20:53:27 volumio kernel: usb 1-1-port1: over-current change #24 Apr 28 20:53:27 volumio systemd[1]: Started Volumio Splash. Apr 28 20:53:27 volumio systemd[1]: Reached target Basic System. Apr 28 20:53:27 volumio systemd[457]: volumiosplash.service: Failed to execute command: No such file or directory Apr 28 20:53:27 volumio systemd[457]: volumiosplash.service: Failed at step EXEC spawning /bin/volumiosplash.sh: No such file or directory Apr 28 20:53:27 volumio systemd[1]: Starting Login Service... Apr 28 20:53:27 volumio systemd[1]: Started Volumio Iptables Module. Apr 28 20:53:27 volumio systemd[1]: Starting Configure Bluetooth Modems connected by UART... Apr 28 20:53:27 volumio systemd[1]: Started Volumio Log Rotation Service. Apr 28 20:53:27 volumio systemd[1]: Condition check resulted in Copy user wpa_supplicant.conf being skipped. Apr 28 20:53:27 volumio systemd[1]: Starting dhcpcd on all interfaces... Apr 28 20:53:27 volumio systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped. Apr 28 20:53:27 volumio systemd[1]: Starting triggerhappy global hotkey daemon... Apr 28 20:53:27 volumio systemd[1]: Condition check resulted in Volumio SSH enabler being skipped. Apr 28 20:53:27 volumio systemd[1]: Started volumio-remote-updater.service. Apr 28 20:53:27 volumio dhcpcd[473]: Not running dhcpcd because /etc/network/interfaces Apr 28 20:53:27 volumio dhcpcd[473]: defines some interfaces that will use a Apr 28 20:53:27 volumio dhcpcd[473]: DHCP client or static address Apr 28 20:53:27 volumio systemd[1]: Started D-Bus System Message Bus. Apr 28 20:53:27 volumio thd[477]: Unable to parse trigger line: Apr 28 20:53:27 volumio thd[477]: Unable to parse trigger line: KEY_MIN_INTERESTING 1 /usr/local/bin/volumio volume toggle Apr 28 20:53:27 volumio thd[477]: Unable to parse trigger line: Apr 28 20:53:27 volumio thd[477]: Found socket passed from systemd Apr 28 20:53:27 volumio kernel: usb usb2-port2: over-current change #24 Apr 28 20:53:27 volumio kernel: usb 1-1-port2: over-current change #23 Apr 28 20:53:27 volumio systemd[1]: Starting Wireless Services... Apr 28 20:53:27 volumio systemd[1]: Started UPnP Renderer front-end to MPD. Apr 28 20:53:27 volumio systemd[1]: Started Manage Sound Card State (restore and store). Apr 28 20:53:27 volumio systemd[1]: Starting Save/Restore Sound Card State... Apr 28 20:53:27 volumio systemd[1]: Starting Avahi mDNS/DNS-SD Stack... Apr 28 20:53:27 volumio alsactl[496]: alsactl 1.1.8 daemon started Apr 28 20:53:27 volumio systemd[1]: Starting WPA supplicant... Apr 28 20:53:27 volumio systemd[1]: Started triggerhappy global hotkey daemon. Apr 28 20:53:27 volumio systemd[1]: Started RPC bind portmap service. Apr 28 20:53:27 volumio systemd[1]: volumiosplash.service: Main process exited, code=exited, status=203/EXEC Apr 28 20:53:27 volumio systemd[1]: volumiosplash.service: Failed with result 'exit-code'. Apr 28 20:53:27 volumio systemd[1]: hciuart.service: Succeeded. Apr 28 20:53:27 volumio systemd[1]: Started Configure Bluetooth Modems connected by UART. Apr 28 20:53:27 volumio systemd[1]: dhcpcd.service: Control process exited, code=exited, status=6/NOTCONFIGURED Apr 28 20:53:27 volumio systemd[1]: dhcpcd.service: Failed with result 'exit-code'. Apr 28 20:53:27 volumio systemd[1]: Failed to start dhcpcd on all interfaces. Apr 28 20:53:27 volumio systemd-logind[464]: New seat seat0. Apr 28 20:53:27 volumio kernel: usb usb2-port3: over-current change #24 Apr 28 20:53:27 volumio kernel: usb 1-1-port3: over-current change #22 Apr 28 20:53:27 volumio systemd[1]: Starting Raspberry Pi bluetooth helper... Apr 28 20:53:27 volumio systemd[1]: Reached target RPC Port Mapper. Apr 28 20:53:27 volumio systemd[1]: Reached target Remote File Systems (Pre). Apr 28 20:53:27 volumio systemd[1]: Reached target Remote File Systems. Apr 28 20:53:28 volumio systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling... Apr 28 20:53:28 volumio sh[382]: wlan0=wlan0 Apr 28 20:53:28 volumio systemd[1]: Started Save/Restore Sound Card State. Apr 28 20:53:28 volumio systemd[1]: Reached target Sound Card. Apr 28 20:53:28 volumio kernel: usb usb2-port1: over-current change #25 Apr 28 20:53:28 volumio kernel: usb 1-1-port1: over-current change #25 Apr 28 20:53:28 volumio kernel: usb usb2-port2: over-current change #25 Apr 28 20:53:28 volumio kernel: usb 1-1-port2: over-current change #24 Apr 28 20:53:28 volumio kernel: usb usb2-port3: over-current change #25 Apr 28 20:53:28 volumio bthelper[505]: Raspberry Pi BDADDR already set Apr 28 20:53:28 volumio kernel: usb usb2-port4: over-current change #23 Apr 28 20:53:28 volumio kernel: usb 1-1-port3: over-current change #23 Apr 28 20:53:28 volumio avahi-daemon[500]: Found user 'avahi' (UID 110) and group 'avahi' (GID 113). Apr 28 20:53:28 volumio avahi-daemon[500]: Successfully dropped root privileges. Apr 28 20:53:28 volumio avahi-daemon[500]: avahi-daemon 0.7 starting up. Apr 28 20:53:29 volumio sh[391]: eth0: waiting for carrier Apr 28 20:53:29 volumio dhcpcd[433]: eth0: waiting for carrier Apr 28 20:53:29 volumio kernel: bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) Apr 28 20:53:29 volumio kernel: bcmgenet fd580000.ethernet eth0: Link is Down Apr 28 20:53:29 volumio kernel: usb usb2-port1: over-current change #26 Apr 28 20:53:29 volumio kernel: usb 1-1-port4: over-current change #22 Apr 28 20:53:29 volumio kernel: usb usb2-port2: over-current change #26 Apr 28 20:53:29 volumio kernel: usb 1-1-port1: over-current change #26 Apr 28 20:53:29 volumio systemd[1]: Started Login Service. Apr 28 20:53:29 volumio systemd[1]: Started Raspberry Pi bluetooth helper. Apr 28 20:53:29 volumio avahi-daemon[500]: Successfully called chroot(). Apr 28 20:53:29 volumio avahi-daemon[500]: Successfully dropped remaining capabilities. Apr 28 20:53:29 volumio wpa_supplicant[503]: Successfully initialized wpa_supplicant Apr 28 20:53:29 volumio avahi-daemon[500]: No service file found in /etc/avahi/services. Apr 28 20:53:29 volumio avahi-daemon[500]: Network interface enumeration completed. Apr 28 20:53:29 volumio avahi-daemon[500]: Server startup complete. Host name is volumio.local. Local service cookie is 4251749902. Apr 28 20:53:29 volumio systemd[1]: Started Raise network interfaces. Apr 28 20:53:29 volumio systemd[1]: Started Avahi mDNS/DNS-SD Stack. Apr 28 20:53:29 volumio systemd[1]: Started WPA supplicant. Apr 28 20:53:29 volumio systemd[1]: Reached target Network. Apr 28 20:53:29 volumio kernel: usb usb2-port3: over-current change #26 Apr 28 20:53:29 volumio kernel: usb 1-1-port2: over-current change #25 Apr 28 20:53:29 volumio systemd[1]: Starting Permit User Sessions... Apr 28 20:53:29 volumio systemd[1]: Starting Network Time Service... Apr 28 20:53:29 volumio systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped. Apr 28 20:53:29 volumio systemd[1]: Reached target Network is Online. Apr 28 20:53:29 volumio systemd[1]: Starting /etc/rc.local Compatibility... Apr 28 20:53:29 volumio systemd[1]: Starting LSB: Brings up/down network automatically... Apr 28 20:53:29 volumio systemd[1]: Starting Samba NMB Daemon... Apr 28 20:53:29 volumio systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Apr 28 20:53:29 volumio kernel: usb usb2-port4: over-current change #24 Apr 28 20:53:29 volumio systemd[1]: Starting Bluetooth service... Apr 28 20:53:29 volumio kernel: usb 1-1-port3: over-current change #24 Apr 28 20:53:29 volumio systemd[1]: Started Permit User Sessions. Apr 28 20:53:29 volumio systemd[1]: Started /etc/rc.local Compatibility. Apr 28 20:53:29 volumio systemd[1]: Starting Hold until boot process finishes up... Apr 28 20:53:29 volumio systemd[1]: Starting Terminate Plymouth Boot Screen... Apr 28 20:53:29 volumio systemd[1]: Received SIGRTMIN+21 from PID 255 (plymouthd). Apr 28 20:53:30 volumio volumio-remote-updater[481]: Error: No active session Apr 28 20:53:30 volumio systemd[1]: Received SIGRTMIN+21 from PID 255 (plymouthd). Apr 28 20:53:30 volumio volumio-remote-updater[481]: [2024-04-28 20:53:30] [info] asio async_connect error: system:111 (Connection refused) Apr 28 20:53:30 volumio volumio-remote-updater[481]: [2024-04-28 20:53:30] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Apr 28 20:53:30 volumio volumio-remote-updater[481]: [2024-04-28 20:53:30] [error] handle_connect error: Underlying Transport Error Apr 28 20:53:30 volumio systemd[1]: plymouth-quit.service: Succeeded. Apr 28 20:53:30 volumio systemd[1]: Started Terminate Plymouth Boot Screen. Apr 28 20:53:30 volumio systemd[1]: plymouth-start.service: Succeeded. Apr 28 20:53:30 volumio systemd[1]: plymouth-quit-wait.service: Succeeded. Apr 28 20:53:30 volumio systemd[1]: Started Hold until boot process finishes up. Apr 28 20:53:30 volumio systemd[1]: Started Getty on tty1. Apr 28 20:53:30 volumio systemd[1]: Reached target Login Prompts. Apr 28 20:53:30 volumio kernel: usb usb2-port1: over-current change #27 Apr 28 20:53:30 volumio kernel: usb 1-1-port4: over-current change #23 Apr 28 20:53:30 volumio kernel: usb usb2-port2: over-current change #27 Apr 28 20:53:30 volumio kernel: usb 1-1-port1: over-current change #27 Apr 28 20:53:30 volumio kernel: usb usb2-port3: over-current change #27 Apr 28 20:53:30 volumio kernel: usb 1-1-port2: over-current change #26 Apr 28 20:53:30 volumio haveged[440]: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 8.2.0 CTV); collect: 128K Apr 28 20:53:30 volumio haveged[440]: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14768/63488 Apr 28 20:53:30 volumio haveged[440]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.00168 Apr 28 20:53:30 volumio haveged[440]: haveged: fills: 0, generated: 0 Apr 28 20:53:30 volumio kernel: usb usb2-port4: over-current change #25 Apr 28 20:53:30 volumio kernel: usb 1-1-port3: over-current change #25 Apr 28 20:53:31 volumio kernel: usb usb2-port1: over-current change #28 Apr 28 20:53:31 volumio kernel: usb 1-1-port4: over-current change #24 Apr 28 20:53:31 volumio kernel: usb usb2-port2: over-current change #28 Apr 28 20:53:31 volumio kernel: usb 1-1-port1: over-current change #28 Apr 28 20:53:31 volumio kernel: usb usb2-port3: over-current change #28 Apr 28 20:53:31 volumio kernel: usb 1-1-port2: over-current change #27 Apr 28 20:53:31 volumio systemd[1]: systemd-rfkill.service: Succeeded. Apr 28 20:53:31 volumio kernel: usb usb2-port4: over-current change #26 Apr 28 20:53:31 volumio kernel: usb 1-1-port3: over-current change #26 Apr 28 20:53:32 volumio kernel: usb usb2-port1: over-current change #29 Apr 28 20:53:32 volumio kernel: usb 1-1-port4: over-current change #25 Apr 28 20:53:32 volumio kernel: usb usb2-port2: over-current change #29 Apr 28 20:53:32 volumio kernel: usb 1-1-port1: over-current change #29 Apr 28 20:53:32 volumio volumio[494]: Could not open config: /tmp/upmpdcli.conf Apr 28 20:53:32 volumio systemd[1]: upmpdcli.service: Main process exited, code=exited, status=1/FAILURE Apr 28 20:53:32 volumio systemd[1]: upmpdcli.service: Failed with result 'exit-code'. Apr 28 20:53:32 volumio ifplugd(eth0)[621]: ifplugd 0.28 initializing. Apr 28 20:53:32 volumio ifplugd(eth0)[621]: Using interface eth0/DC:A6:32:CA:AD:59 with driver (version: 6.1.69-v7l+) Apr 28 20:53:32 volumio ifplugd(eth0)[621]: Using detection mode: SIOCETHTOOL Apr 28 20:53:32 volumio ifplugd(eth0)[621]: Initialization complete, link beat not detected. Apr 28 20:53:32 volumio loadcpufreq[521]: Loading cpufreq kernel modules...done (none). Apr 28 20:53:32 volumio systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling. Apr 28 20:53:32 volumio kernel: usb usb2-port3: over-current change #29 Apr 28 20:53:32 volumio systemd[1]: Starting LSB: set CPUFreq kernel parameters... Apr 28 20:53:32 volumio ifplugd[574]: Network Interface Plugging Daemon...start eth0...done. Apr 28 20:53:32 volumio systemd[1]: Started LSB: Brings up/down network automatically. Apr 28 20:53:32 volumio kernel: usb 1-1-port2: over-current change #28 Apr 28 20:53:32 volumio systemd[1]: iptables.service: Succeeded. Apr 28 20:53:32 volumio bluetoothd[580]: Bluetooth daemon 5.50 Apr 28 20:53:32 volumio ntpd[572]: ntpd 4.2.8p12@1.3728-o (1): Starting Apr 28 20:53:32 volumio ntpd[572]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 103:103 Apr 28 20:53:32 volumio systemd[1]: Started Network Time Service. Apr 28 20:53:32 volumio bluetoothd[580]: Unknown key AutoConnectTimeout for group General in /etc/bluetooth/main.conf Apr 28 20:53:32 volumio systemd[1]: Started Bluetooth service. Apr 28 20:53:32 volumio bluetoothd[580]: Starting SDP server Apr 28 20:53:32 volumio bluetoothd[580]: Excluding (cli) sap Apr 28 20:53:32 volumio systemd[1]: Reached target Bluetooth. Apr 28 20:53:32 volumio kernel: usb usb2-port4: over-current change #27 Apr 28 20:53:32 volumio ntpd[629]: proto: precision = 2.111 usec (-19) Apr 28 20:53:32 volumio kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Apr 28 20:53:32 volumio kernel: Bluetooth: BNEP filters: protocol multicast Apr 28 20:53:32 volumio kernel: Bluetooth: BNEP socket layer initialized Apr 28 20:53:32 volumio bluetoothd[580]: Bluetooth management interface 1.22 initialized Apr 28 20:53:32 volumio dbus-daemon[485]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=580 comm="/usr/lib/bluetooth/bluetoothd --noplugin=sap ") Apr 28 20:53:32 volumio kernel: Bluetooth: MGMT ver 1.22 Apr 28 20:53:32 volumio ntpd[629]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Apr 28 20:53:32 volumio ntpd[629]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2024-06-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Apr 28 20:53:32 volumio ntpd[629]: Listen and drop on 0 v6wildcard [::]:123 Apr 28 20:53:32 volumio ntpd[629]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Apr 28 20:53:32 volumio ntpd[629]: Listen normally on 2 lo 127.0.0.1:123 Apr 28 20:53:32 volumio ntpd[629]: Listening on routing socket on fd #19 for interface updates Apr 28 20:53:32 volumio ntpd[629]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Apr 28 20:53:32 volumio ntpd[629]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Apr 28 20:53:32 volumio kernel: usb 1-1-port3: over-current change #27 Apr 28 20:53:32 volumio cpufrequtils[624]: CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...CPU2...CPU3...done. Apr 28 20:53:32 volumio bluetoothd[580]: Failed to set privacy: Rejected (0x0b) Apr 28 20:53:33 volumio kernel: usb usb2-port1: over-current change #30 Apr 28 20:53:33 volumio kernel: usb 1-1-port4: over-current change #26 Apr 28 20:53:33 volumio systemd[1]: Started LSB: set CPUFreq kernel parameters. Apr 28 20:53:33 volumio systemd[1]: Starting Hostname Service... Apr 28 20:53:33 volumio sh[391]: eth0: carrier acquired Apr 28 20:53:33 volumio dhcpcd[433]: eth0: carrier acquired Apr 28 20:53:33 volumio kernel: bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx Apr 28 20:53:33 volumio sh[391]: DUID 00:01:00:01:2d:3d:6c:a3:dc:a6:32:ca:ad:59 Apr 28 20:53:33 volumio sh[391]: eth0: IAID 32:ca:ad:59 Apr 28 20:53:33 volumio dhcpcd[433]: DUID 00:01:00:01:2d:3d:6c:a3:dc:a6:32:ca:ad:59 Apr 28 20:53:33 volumio dhcpcd[433]: eth0: IAID 32:ca:ad:59 Apr 28 20:53:33 volumio dhcpcd[433]: eth0: adding address fe80::b3e3:acd:573e:20c8 Apr 28 20:53:33 volumio sh[391]: eth0: adding address fe80::b3e3:acd:573e:20c8 Apr 28 20:53:33 volumio sh[391]: ipv6_addaddr1: Permission denied Apr 28 20:53:33 volumio dhcpcd[433]: ipv6_addaddr1: Permission denied Apr 28 20:53:33 volumio dbus-daemon[485]: [system] Successfully activated service 'org.freedesktop.hostname1' Apr 28 20:53:33 volumio systemd[1]: Started Hostname Service. Apr 28 20:53:33 volumio sh[391]: eth0: soliciting an IPv6 router Apr 28 20:53:33 volumio dhcpcd[433]: eth0: soliciting an IPv6 router Apr 28 20:53:33 volumio nmbd[584]: [2024/04/28 20:53:33.509034, 0] ../source3/nmbd/asyncdns.c:158(start_async_dns) Apr 28 20:53:33 volumio nmbd[584]: started asyncdns process 654 Apr 28 20:53:33 volumio nmbd[584]: [2024/04/28 20:53:33.510692, 0] ../lib/util/become_daemon.c:149(daemon_status) Apr 28 20:53:33 volumio nmbd[584]: daemon_status: STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ... Apr 28 20:53:33 volumio nmbd[584]: [2024/04/28 20:53:33.510876, 0] ../source3/nmbd/nmbd_subnetdb.c:254(create_subnets) Apr 28 20:53:33 volumio nmbd[584]: NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6). Apr 28 20:53:33 volumio ifplugd(eth0)[621]: Link beat detected. Apr 28 20:53:33 volumio ntpd[629]: error resolving pool 0.debian.pool.ntp.org: System error (-11) Apr 28 20:53:33 volumio ifplugd(eth0)[621]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. Apr 28 20:53:33 volumio ifplugd(eth0)[621]: client: ifup: waiting for lock on /run/network/ifstate.eth0 Apr 28 20:53:33 volumio kernel: usb 1-1.2: new high-speed USB device number 3 using xhci_hcd Apr 28 20:53:33 volumio wireless.js[492]: Cleaning previous... Apr 28 20:53:33 volumio kernel: usb 1-1.2: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 Apr 28 20:53:33 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Apr 28 20:53:33 volumio kernel: usb 1-1.2: Product: Cruzer Blade Apr 28 20:53:33 volumio kernel: usb 1-1.2: Manufacturer: SanDisk Apr 28 20:53:33 volumio kernel: usb 1-1.2: SerialNumber: 00002428040522014257 Apr 28 20:53:33 volumio kernel: usb-storage 1-1.2:1.0: USB Mass Storage device detected Apr 28 20:53:33 volumio kernel: scsi host0: usb-storage 1-1.2:1.0 Apr 28 20:53:33 volumio bthelper[505]: Changing power off succeeded Apr 28 20:53:34 volumio sudo[667]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Apr 28 20:53:34 volumio sudo[667]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:34 volumio sudo[667]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:34 volumio sudo[673]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Apr 28 20:53:34 volumio sudo[673]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:34 volumio kernel: usb usb2-port1: over-current change #31 Apr 28 20:53:34 volumio bthelper[505]: [CHG] Controller DC:A6:32:CA:AD:5B Class: 0x0000041c Apr 28 20:53:34 volumio bthelper[505]: Changing power on succeeded Apr 28 20:53:34 volumio kernel: usb 1-1-port1: over-current change #30 Apr 28 20:53:34 volumio sh[391]: eth0: soliciting a DHCP lease Apr 28 20:53:34 volumio dhcpcd[433]: eth0: soliciting a DHCP lease Apr 28 20:53:34 volumio sh[391]: eth0: offered 10.11.10.109 from 10.11.10.1 Apr 28 20:53:34 volumio dhcpcd[433]: eth0: offered 10.11.10.109 from 10.11.10.1 Apr 28 20:53:34 volumio sh[391]: eth0: probing address 10.11.10.109/24 Apr 28 20:53:34 volumio dhcpcd[433]: eth0: probing address 10.11.10.109/24 Apr 28 20:53:34 volumio kernel: usb usb2-port1: over-current condition Apr 28 20:53:34 volumio kernel: usb usb2-port2: over-current change #30 Apr 28 20:53:34 volumio kernel: usb 1-1-port2: over-current change #29 Apr 28 20:53:34 volumio sudo[673]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:34 volumio kernel: usb usb2-port3: over-current change #30 Apr 28 20:53:34 volumio wireless.js[492]: Stopped aP Apr 28 20:53:34 volumio ntpd[629]: error resolving pool 1.debian.pool.ntp.org: System error (-11) Apr 28 20:53:34 volumio sudo[685]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Apr 28 20:53:34 volumio sudo[685]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:34 volumio sudo[685]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:34 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Apr 28 20:53:34 volumio kernel: usb 1-1-port3: over-current change #28 Apr 28 20:53:34 volumio sudo[687]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg get Apr 28 20:53:34 volumio sudo[687]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:34 volumio sudo[687]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:34 volumio sudo[694]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Apr 28 20:53:34 volumio sudo[694]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:34 volumio sudo[694]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:34 volumio sudo[696]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw wlan0 scan Apr 28 20:53:34 volumio sudo[696]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:34 volumio kernel: usb usb2-port3: over-current condition Apr 28 20:53:34 volumio kernel: usb usb2-port4: over-current change #28 Apr 28 20:53:34 volumio kernel: usb 1-1-port4: over-current change #27 Apr 28 20:53:35 volumio volumio-remote-updater[481]: [2024-04-28 20:53:35] [info] asio async_connect error: system:111 (Connection refused) Apr 28 20:53:35 volumio volumio-remote-updater[481]: [2024-04-28 20:53:35] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Apr 28 20:53:35 volumio volumio-remote-updater[481]: [2024-04-28 20:53:35] [error] handle_connect error: Underlying Transport Error Apr 28 20:53:35 volumio kernel: usb usb2-port1: over-current change #32 Apr 28 20:53:35 volumio kernel: usb 1-1-port1: over-current change #31 Apr 28 20:53:35 volumio kernel: usb usb2-port1: over-current condition Apr 28 20:53:35 volumio kernel: usb usb2-port2: over-current change #31 Apr 28 20:53:35 volumio kernel: usb usb2-port3: over-current change #31 Apr 28 20:53:35 volumio ntpd[629]: error resolving pool 2.debian.pool.ntp.org: System error (-11) Apr 28 20:53:35 volumio kernel: usb 1-1-port2: over-current change #30 Apr 28 20:53:35 volumio kernel: usb usb2-port4: over-current change #29 Apr 28 20:53:35 volumio kernel: usb 1-1.2: USB disconnect, device number 3 Apr 28 20:53:35 volumio kernel: usb 1-1-port3: over-current change #29 Apr 28 20:53:35 volumio kernel: hwmon hwmon1: Undervoltage detected! Apr 28 20:53:36 volumio kernel: usb usb2-port1: over-current change #33 Apr 28 20:53:36 volumio kernel: usb 1-1-port4: over-current change #28 Apr 28 20:53:36 volumio kernel: usb usb2-port2: over-current change #32 Apr 28 20:53:36 volumio kernel: usb 1-1-port1: over-current change #32 Apr 28 20:53:36 volumio kernel: usb usb2-port3: over-current change #32 Apr 28 20:53:36 volumio ntpd[629]: error resolving pool 3.debian.pool.ntp.org: System error (-11) Apr 28 20:53:36 volumio kernel: usb 1-1-port2: over-current change #31 Apr 28 20:53:36 volumio kernel: usb usb2-port4: over-current change #30 Apr 28 20:53:36 volumio kernel: usb 1-1-port3: over-current change #30 Apr 28 20:53:37 volumio kernel: usb usb2-port1: over-current change #34 Apr 28 20:53:37 volumio kernel: usb 1-1-port4: over-current change #29 Apr 28 20:53:37 volumio kernel: usb usb2-port2: over-current change #33 Apr 28 20:53:37 volumio kernel: usb 1-1-port1: over-current change #33 Apr 28 20:53:37 volumio kernel: usb usb2-port3: over-current change #33 Apr 28 20:53:37 volumio sudo[696]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:37 volumio wireless.js[492]: SETTING APPROPRIATE REG DOMAIN: RU Apr 28 20:53:37 volumio sudo[701]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Apr 28 20:53:37 volumio sudo[701]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:37 volumio kernel: usb 1-1-port2: over-current change #32 Apr 28 20:53:37 volumio sudo[701]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:37 volumio sudo[703]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg set RU Apr 28 20:53:37 volumio sudo[703]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:37 volumio sudo[703]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:37 volumio wireless.js[492]: SUCCESSFULLY SET NEW REGDOMAIN: RU Apr 28 20:53:37 volumio kernel: usb usb2-port4: over-current change #31 Apr 28 20:53:37 volumio sudo[710]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Apr 28 20:53:37 volumio sudo[710]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:37 volumio sudo[710]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:37 volumio sudo[712]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Apr 28 20:53:37 volumio sudo[712]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:37 volumio kernel: usb 1-1-port3: over-current change #31 Apr 28 20:53:37 volumio kernel: usb usb2-port1: over-current change #35 Apr 28 20:53:38 volumio kernel: usb 1-1-port4: over-current change #30 Apr 28 20:53:38 volumio kernel: usb usb2-port2: over-current change #34 Apr 28 20:53:38 volumio sudo[712]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:38 volumio wireless.js[492]: Hotspot is disabled, not starting it Apr 28 20:53:38 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Apr 28 20:53:38 volumio kernel: usb 1-1-port1: over-current change #34 Apr 28 20:53:38 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Apr 28 20:53:38 volumio systemd[1]: wireless.service: Succeeded. Apr 28 20:53:38 volumio systemd[1]: Started Wireless Services. Apr 28 20:53:38 volumio systemd[1]: Started Volumio Backend Module. Apr 28 20:53:38 volumio systemd[1]: Started Volumio Cpu Tweaker. Apr 28 20:53:38 volumio kernel: usb usb2-port3: over-current change #34 Apr 28 20:53:38 volumio kernel: usb 1-1-port2: over-current change #33 Apr 28 20:53:38 volumio kernel: usb usb2-port4: over-current change #32 Apr 28 20:53:38 volumio kernel: usb 1-1-port3: over-current change #32 Apr 28 20:53:38 volumio kernel: usb usb2-port1: over-current change #36 Apr 28 20:53:39 volumio kernel: usb 1-1-port4: over-current change #31 Apr 28 20:53:39 volumio kernel: usb usb2-port2: over-current change #35 Apr 28 20:53:39 volumio kernel: usb 1-1-port1: over-current change #35 Apr 28 20:53:39 volumio kernel: usb usb2-port3: over-current change #35 Apr 28 20:53:39 volumio kernel: usb 1-1-port2: over-current change #34 Apr 28 20:53:39 volumio kernel: usb usb2-port4: over-current change #33 Apr 28 20:53:39 volumio kernel: usb 1-1-port3: over-current change #33 Apr 28 20:53:39 volumio kernel: usb usb2-port1: over-current change #37 Apr 28 20:53:39 volumio sh[391]: eth0: leased 10.11.10.109 for 43200 seconds Apr 28 20:53:39 volumio dhcpcd[433]: eth0: leased 10.11.10.109 for 43200 seconds Apr 28 20:53:39 volumio sh[391]: eth0: adding route to 10.11.10.0/24 Apr 28 20:53:39 volumio sh[391]: eth0: adding default route via 10.11.10.1 Apr 28 20:53:39 volumio dhcpcd[433]: eth0: adding route to 10.11.10.0/24 Apr 28 20:53:39 volumio dhcpcd[433]: eth0: adding default route via 10.11.10.1 Apr 28 20:53:39 volumio avahi-daemon[500]: Joining mDNS multicast group on interface eth0.IPv4 with address 10.11.10.109. Apr 28 20:53:39 volumio avahi-daemon[500]: New relevant interface eth0.IPv4 for mDNS. Apr 28 20:53:39 volumio avahi-daemon[500]: Registering new address record for 10.11.10.109 on eth0.IPv4. Apr 28 20:53:39 volumio volumio-cpu-tweak[719]: Setting RT Priority for mpd Apr 28 20:53:39 volumio volumio-cpu-tweak[719]: pid 35's current scheduling policy: SCHED_OTHER Apr 28 20:53:39 volumio volumio-cpu-tweak[719]: pid 35's current scheduling priority: 0 Apr 28 20:53:39 volumio volumio-cpu-tweak[719]: Setting MPD Affinity Apr 28 20:53:39 volumio volumio-cpu-tweak[719]: pid 3's current affinity mask: f Apr 28 20:53:39 volumio volumio-cpu-tweak[719]: /bin/volumio_cpu_tweak: line 27: warning: command substitution: ignored null byte in input Apr 28 20:53:39 volumio volumio-cpu-tweak[719]: VOLUMIO CPU TWEAK: Setting CPU Governor: performance Apr 28 20:53:40 volumio sh[391]: forked to background, child pid 756 Apr 28 20:53:40 volumio dhcpcd[433]: forked to background, child pid 756 Apr 28 20:53:40 volumio kernel: usb 1-1-port4: over-current change #32 Apr 28 20:53:40 volumio systemd[1]: volumio_cpu_tweak.service: Succeeded. Apr 28 20:53:40 volumio kernel: usb usb2-port2: over-current change #36 Apr 28 20:53:40 volumio kernel: hwmon hwmon1: Voltage normalised Apr 28 20:53:40 volumio kernel: usb 1-1-port1: over-current change #36 Apr 28 20:53:40 volumio kernel: usb usb2-port3: over-current change #36 Apr 28 20:53:40 volumio ifplugd(eth0)[621]: client: ifup: interface eth0 already configured Apr 28 20:53:40 volumio sh[391]: eth0=eth0 Apr 28 20:53:40 volumio kernel: usb 1-1-port2: over-current change #35 Apr 28 20:53:40 volumio ifplugd(eth0)[621]: Program executed successfully. Apr 28 20:53:40 volumio kernel: usb usb2-port4: over-current change #34 Apr 28 20:53:40 volumio kernel: usb 1-1-port3: over-current change #34 Apr 28 20:53:40 volumio kernel: usb usb2-port1: over-current change #38 Apr 28 20:53:41 volumio kernel: usb 1-1-port4: over-current change #33 Apr 28 20:53:41 volumio kernel: usb usb2-port2: over-current change #37 Apr 28 20:53:41 volumio kernel: usb usb2-port1: over-current change #39 Apr 28 20:53:41 volumio kernel: usb 1-1-port1: over-current change #37 Apr 28 20:53:41 volumio ntpd[629]: Listen normally on 3 eth0 10.11.10.109:123 Apr 28 20:53:41 volumio ntpd[629]: new interface(s) found: waking up resolver Apr 28 20:53:41 volumio kernel: usb usb2-port2: over-current change #38 Apr 28 20:53:41 volumio kernel: usb 1-1-port2: over-current change #36 Apr 28 20:53:41 volumio volumio[718]: info: ------------------------------------------- Apr 28 20:53:41 volumio volumio[718]: info: ----- Volumio3 ---- Apr 28 20:53:41 volumio volumio[718]: info: ------------------------------------------- Apr 28 20:53:41 volumio volumio[718]: info: ----- System startup ---- Apr 28 20:53:41 volumio volumio[718]: info: ------------------------------------------- Apr 28 20:53:41 volumio kernel: usb usb2-port3: over-current change #37 Apr 28 20:53:42 volumio kernel: usb 1-1-port3: over-current change #35 Apr 28 20:53:42 volumio kernel: usb usb2-port4: over-current change #35 Apr 28 20:53:42 volumio kernel: usb 1-1-port4: over-current change #34 Apr 28 20:53:42 volumio volumio-remote-updater[481]: [2024-04-28 20:53:42] [connect] Successful connection Apr 28 20:53:42 volumio volumio[718]: info: MYVOLUMIO Environment detected Apr 28 20:53:42 volumio volumio[718]: info: Plugin folders cleanup Apr 28 20:53:42 volumio volumio[718]: info: Scanning into folder /volumio/app/plugins/ Apr 28 20:53:42 volumio volumio[718]: info: Scanning category audio_interface Apr 28 20:53:42 volumio volumio[718]: info: Scanning category miscellanea Apr 28 20:53:42 volumio volumio[718]: info: Scanning category music_service Apr 28 20:53:42 volumio volumio[718]: info: Scanning category plugins.json Apr 28 20:53:42 volumio volumio[718]: info: Scanning category system_controller Apr 28 20:53:42 volumio volumio[718]: info: Scanning category user_interface Apr 28 20:53:42 volumio volumio[718]: info: Scanning into folder /data/plugins/ Apr 28 20:53:42 volumio volumio[718]: info: Plugin folders cleanup completed Apr 28 20:53:42 volumio volumio[718]: info: ------------------------------------------- Apr 28 20:53:42 volumio volumio[718]: info: ----- Core plugins startup ---- Apr 28 20:53:42 volumio volumio[718]: info: ------------------------------------------- Apr 28 20:53:42 volumio volumio[718]: info: Loading plugins from folder /volumio/app/plugins/ Apr 28 20:53:42 volumio volumio[718]: info: Adding plugin upnp to MyMusic Plugins Apr 28 20:53:42 volumio volumio[718]: info: Adding plugin airplay_emulation to MyMusic Plugins Apr 28 20:53:42 volumio volumio[718]: info: Adding plugin upnp_browser to MyMusic Plugins Apr 28 20:53:42 volumio volumio[718]: info: Loading plugins from folder /data/plugins/ Apr 28 20:53:42 volumio volumio[718]: info: Loading plugin "system"... Apr 28 20:53:42 volumio volumio[718]: info: Loading plugin "appearance"... Apr 28 20:53:42 volumio kernel: usb usb2-port1: over-current change #40 Apr 28 20:53:43 volumio kernel: usb 1-1-port1: over-current change #38 Apr 28 20:53:43 volumio kernel: usb usb2-port2: over-current change #39 Apr 28 20:53:43 volumio kernel: usb 1-1-port2: over-current change #37 Apr 28 20:53:43 volumio kernel: usb usb2-port3: over-current change #38 Apr 28 20:53:43 volumio kernel: usb 1-1-port3: over-current change #36 Apr 28 20:53:43 volumio kernel: usb usb2-port3: over-current condition Apr 28 20:53:43 volumio kernel: usb usb2-port4: over-current change #36 Apr 28 20:53:43 volumio kernel: usb 1-1-port4: over-current change #35 Apr 28 20:53:43 volumio kernel: usb usb2-port1: over-current change #41 Apr 28 20:53:43 volumio nmbd[584]: [2024/04/28 20:53:43.908372, 0] ../lib/util/become_daemon.c:138(daemon_ready) Apr 28 20:53:43 volumio nmbd[584]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections Apr 28 20:53:43 volumio systemd[1]: Started Samba NMB Daemon. Apr 28 20:53:43 volumio nmbd[584]: [2024/04/28 20:53:43.927593, 0] ../source3/nmbd/nmbd_namequery.c:109(query_name_response) Apr 28 20:53:43 volumio nmbd[584]: query_name_response: Multiple (2) responses received for a query on subnet 10.11.10.109 for name WORKGROUP<1d>. Apr 28 20:53:43 volumio nmbd[584]: This response was from IP 10.11.10.1, reporting an IP address of 10.11.10.1. Apr 28 20:53:43 volumio systemd[1]: Starting Samba Winbind Daemon... Apr 28 20:53:44 volumio kernel: usb 1-1-port1: over-current change #39 Apr 28 20:53:44 volumio kernel: usb usb2-port2: over-current change #40 Apr 28 20:53:44 volumio winbindd[795]: [2024/04/28 20:53:44.198884, 0] ../source3/winbindd/winbindd_cache.c:3160(initialize_winbindd_cache) Apr 28 20:53:44 volumio winbindd[795]: initialize_winbindd_cache: clearing cache and re-creating with version number 2 Apr 28 20:53:44 volumio kernel: usb 1-1-port2: over-current change #38 Apr 28 20:53:44 volumio kernel: usb usb2-port3: over-current change #39 Apr 28 20:53:44 volumio kernel: usb 1-1-port3: over-current change #37 Apr 28 20:53:44 volumio kernel: usb usb2-port4: over-current change #37 Apr 28 20:53:44 volumio kernel: usb 1-1-port4: over-current change #36 Apr 28 20:53:44 volumio kernel: usb usb2-port1: over-current change #42 Apr 28 20:53:45 volumio kernel: usb 1-1-port1: over-current change #40 Apr 28 20:53:45 volumio kernel: usb usb2-port2: over-current change #41 Apr 28 20:53:45 volumio kernel: usb 1-1-port2: over-current change #39 Apr 28 20:53:45 volumio kernel: usb usb2-port3: over-current change #40 Apr 28 20:53:45 volumio kernel: usb 1-1-port3: over-current change #38 Apr 28 20:53:45 volumio kernel: usb usb2-port4: over-current change #38 Apr 28 20:53:45 volumio kernel: usb 1-1-port4: over-current change #37 Apr 28 20:53:45 volumio kernel: usb usb2-port1: over-current change #43 Apr 28 20:53:46 volumio kernel: usb 1-1-port1: over-current change #41 Apr 28 20:53:46 volumio kernel: usb usb2-port2: over-current change #42 Apr 28 20:53:46 volumio kernel: usb 1-1-port2: over-current change #40 Apr 28 20:53:46 volumio kernel: usb usb2-port3: over-current change #41 Apr 28 20:53:46 volumio kernel: usb 1-1-port3: over-current change #39 Apr 28 20:53:46 volumio kernel: usb usb2-port4: over-current change #39 Apr 28 20:53:46 volumio kernel: usb 1-1-port4: over-current change #38 Apr 28 20:53:46 volumio kernel: usb usb2-port1: over-current change #44 Apr 28 20:53:46 volumio kernel: usb 1-1-port1: over-current change #42 Apr 28 20:53:47 volumio kernel: usb usb2-port2: over-current change #43 Apr 28 20:53:47 volumio kernel: usb 1-1-port2: over-current change #41 Apr 28 20:53:47 volumio kernel: usb usb2-port3: over-current change #42 Apr 28 20:53:47 volumio kernel: usb 1-1-port3: over-current change #40 Apr 28 20:53:47 volumio kernel: usb usb2-port4: over-current change #40 Apr 28 20:53:47 volumio kernel: usb 1-1-port4: over-current change #39 Apr 28 20:53:47 volumio kernel: usb usb2-port1: over-current change #45 Apr 28 20:53:47 volumio kernel: usb 1-1-port1: over-current change #43 Apr 28 20:53:47 volumio kernel: usb usb2-port2: over-current change #44 Apr 28 20:53:48 volumio kernel: usb 1-1-port2: over-current change #42 Apr 28 20:53:48 volumio kernel: usb usb2-port3: over-current change #43 Apr 28 20:53:48 volumio kernel: usb 1-1-port3: over-current change #41 Apr 28 20:53:48 volumio kernel: usb usb2-port4: over-current change #41 Apr 28 20:53:48 volumio kernel: usb 1-1-port4: over-current change #40 Apr 28 20:53:48 volumio kernel: usb usb2-port1: over-current change #46 Apr 28 20:53:48 volumio kernel: usb 1-1-port1: over-current change #44 Apr 28 20:53:48 volumio kernel: usb usb2-port2: over-current change #45 Apr 28 20:53:49 volumio kernel: usb 1-1-port2: over-current change #43 Apr 28 20:53:49 volumio kernel: usb usb2-port3: over-current change #44 Apr 28 20:53:49 volumio kernel: usb 1-1-port3: over-current change #42 Apr 28 20:53:49 volumio kernel: usb usb2-port4: over-current change #42 Apr 28 20:53:49 volumio kernel: usb 1-1-port4: over-current change #41 Apr 28 20:53:49 volumio kernel: usb usb2-port1: over-current change #47 Apr 28 20:53:49 volumio kernel: usb 1-1-port1: over-current change #45 Apr 28 20:53:49 volumio kernel: usb usb2-port2: over-current change #46 Apr 28 20:53:50 volumio kernel: usb 1-1-port2: over-current change #44 Apr 28 20:53:50 volumio kernel: usb usb2-port3: over-current change #45 Apr 28 20:53:50 volumio kernel: usb 1-1-port3: over-current change #43 Apr 28 20:53:50 volumio kernel: usb usb2-port4: over-current change #43 Apr 28 20:53:50 volumio kernel: usb 1-1-port4: over-current change #42 Apr 28 20:53:50 volumio kernel: usb usb2-port1: over-current change #48 Apr 28 20:53:50 volumio winbindd[795]: [2024/04/28 20:53:50.810260, 0] ../lib/util/become_daemon.c:138(daemon_ready) Apr 28 20:53:50 volumio kernel: usb 1-1-port1: over-current change #46 Apr 28 20:53:50 volumio winbindd[795]: daemon_ready: STATUS=daemon 'winbindd' finished starting up and ready to serve connections Apr 28 20:53:50 volumio systemd[1]: Started Samba Winbind Daemon. Apr 28 20:53:50 volumio systemd[1]: Starting Samba SMB Daemon... Apr 28 20:53:50 volumio kernel: usb usb2-port2: over-current change #47 Apr 28 20:53:51 volumio kernel: usb 1-1-port2: over-current change #45 Apr 28 20:53:51 volumio kernel: usb usb2-port3: over-current change #46 Apr 28 20:53:51 volumio kernel: usb 1-1-port3: over-current change #44 Apr 28 20:53:51 volumio kernel: usb usb2-port4: over-current change #44 Apr 28 20:53:51 volumio kernel: usb 1-1-port4: over-current change #43 Apr 28 20:53:51 volumio kernel: usb usb2-port1: over-current change #49 Apr 28 20:53:51 volumio systemd[1]: Started Samba SMB Daemon. Apr 28 20:53:51 volumio systemd[1]: Reached target Multi-User System. Apr 28 20:53:51 volumio smbd[800]: [2024/04/28 20:53:51.630725, 0] ../lib/util/become_daemon.c:138(daemon_ready) Apr 28 20:53:51 volumio systemd[1]: Reached target Graphical Interface. Apr 28 20:53:51 volumio smbd[800]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections Apr 28 20:53:51 volumio systemd[1]: Starting Update UTMP about System Runlevel Changes... Apr 28 20:53:51 volumio systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. Apr 28 20:53:51 volumio systemd[1]: Started Update UTMP about System Runlevel Changes. Apr 28 20:53:51 volumio systemd[1]: Startup finished in 14.659s (kernel) + 34.485s (userspace) = 49.144s. Apr 28 20:53:51 volumio kernel: usb 1-1-port1: over-current change #47 Apr 28 20:53:51 volumio kernel: usb usb2-port2: over-current change #48 Apr 28 20:53:52 volumio kernel: usb 1-1-port2: over-current change #46 Apr 28 20:53:52 volumio kernel: usb usb2-port3: over-current change #47 Apr 28 20:53:52 volumio kernel: usb 1-1-port3: over-current change #45 Apr 28 20:53:52 volumio kernel: usb usb2-port4: over-current change #45 Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "network"... Apr 28 20:53:52 volumio volumio[718]: info: Refreshing Cached IP Addresses Apr 28 20:53:52 volumio sudo[810]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Apr 28 20:53:52 volumio sudo[810]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "services"... Apr 28 20:53:52 volumio sudo[810]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:52 volumio sudo[812]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Apr 28 20:53:52 volumio sudo[812]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "alsa_controller"... Apr 28 20:53:52 volumio sudo[812]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:52 volumio sudo[815]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan Apr 28 20:53:52 volumio kernel: usb 1-1-port4: over-current change #44 Apr 28 20:53:52 volumio sudo[815]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:53:52 volumio kernel: usb usb2-port1: over-current change #50 Apr 28 20:53:52 volumio kernel: hwmon hwmon1: Undervoltage detected! Apr 28 20:53:52 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "wizard"... Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "networkfs"... Apr 28 20:53:52 volumio kernel: usb 1-1-port1: over-current change #48 Apr 28 20:53:52 volumio volumio[718]: info: Starting Udev Watcher for removable devices Apr 28 20:53:52 volumio kernel: usb usb2-port2: over-current change #49 Apr 28 20:53:52 volumio volumio[718]: info: Ignoring mount for partition: boot Apr 28 20:53:52 volumio volumio[718]: info: Ignoring mount for partition: volumio Apr 28 20:53:52 volumio volumio[718]: info: Ignoring mount for partition: volumio_data Apr 28 20:53:52 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "volumio_command_line_client"... Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "upnp"... Apr 28 20:53:52 volumio volumio[718]: info: [1714326832843] Starting Upmpd Daemon Apr 28 20:53:52 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "my_music"... Apr 28 20:53:52 volumio volumio[718]: info: Loading plugin "mpd"... Apr 28 20:53:52 volumio kernel: usb 1-1-port2: over-current change #47 Apr 28 20:53:53 volumio kernel: usb usb2-port3: over-current change #48 Apr 28 20:53:53 volumio kernel: usb 1-1-port3: over-current change #46 Apr 28 20:53:53 volumio kernel: usb usb2-port3: over-current condition Apr 28 20:53:53 volumio kernel: usb usb2-port4: over-current change #46 Apr 28 20:53:53 volumio kernel: usb 1-1-port4: over-current change #45 Apr 28 20:53:53 volumio kernel: usb usb2-port1: over-current change #51 Apr 28 20:53:53 volumio kernel: usb 1-1-port1: over-current change #49 Apr 28 20:53:53 volumio kernel: usb usb2-port2: over-current change #50 Apr 28 20:53:53 volumio kernel: usb 1-1-port2: over-current change #48 Apr 28 20:53:54 volumio kernel: usb usb2-port3: over-current change #49 Apr 28 20:53:54 volumio kernel: usb 1-1-port3: over-current change #47 Apr 28 20:53:54 volumio kernel: usb usb2-port4: over-current change #47 Apr 28 20:53:54 volumio kernel: usb 1-1-port4: over-current change #46 Apr 28 20:53:54 volumio kernel: usb usb2-port1: over-current change #52 Apr 28 20:53:54 volumio kernel: usb 1-1-port1: over-current change #50 Apr 28 20:53:54 volumio kernel: usb usb2-port2: over-current change #51 Apr 28 20:53:54 volumio kernel: usb 1-1-port2: over-current change #49 Apr 28 20:53:54 volumio kernel: usb usb2-port3: over-current change #50 Apr 28 20:53:55 volumio kernel: usb 1-1-port3: over-current change #48 Apr 28 20:53:55 volumio kernel: usb usb2-port4: over-current change #48 Apr 28 20:53:55 volumio kernel: usb 1-1-port4: over-current change #47 Apr 28 20:53:55 volumio sudo[815]: pam_unix(sudo:session): session closed for user root Apr 28 20:53:55 volumio kernel: usb usb2-port1: over-current change #53 Apr 28 20:53:55 volumio kernel: usb 1-1-port1: over-current change #51 Apr 28 20:53:55 volumio kernel: usb usb2-port2: over-current change #52 Apr 28 20:53:55 volumio kernel: usb 1-1-port2: over-current change #50 Apr 28 20:53:55 volumio kernel: usb usb2-port3: over-current change #51 Apr 28 20:53:56 volumio kernel: usb 1-1-port3: over-current change #49 Apr 28 20:53:56 volumio kernel: usb usb2-port4: over-current change #49 Apr 28 20:53:56 volumio volumio[718]: info: Loading plugin "upnp_browser"... Apr 28 20:53:56 volumio kernel: usb 1-1-port4: over-current change #48 Apr 28 20:53:56 volumio kernel: usb usb2-port1: over-current change #54 Apr 28 20:53:56 volumio kernel: usb 1-1-port1: over-current change #52 Apr 28 20:53:56 volumio kernel: usb usb2-port2: over-current change #53 Apr 28 20:53:56 volumio volumio[718]: info: Loading plugin "alarm-clock"... Apr 28 20:53:56 volumio kernel: usb 1-1-port2: over-current change #51 Apr 28 20:53:56 volumio volumio[718]: info: Alarm: Scheduling Playlist Music at 10:50 Apr 28 20:53:56 volumio volumio[718]: info: Loading plugin "airplay_emulation"... Apr 28 20:53:56 volumio volumio[718]: info: Starting Shairport Sync Apr 28 20:53:56 volumio volumio[718]: info: Loading plugin "last_100"... Apr 28 20:53:56 volumio volumio[718]: info: Loading plugin "webradio"... Apr 28 20:53:56 volumio systemd[1]: systemd-fsckd.service: Succeeded. Apr 28 20:53:56 volumio kernel: usb usb2-port3: over-current change #52 Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "i2s_dacs"... Apr 28 20:53:57 volumio volumio[718]: info: I2S DAC not set, start Auto-detection Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "volumiodiscovery"... Apr 28 20:53:57 volumio kernel: usb 1-1-port3: over-current change #50 Apr 28 20:53:57 volumio volumio[718]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Apr 28 20:53:57 volumio volumio[718]: *** WARNING *** Please fix your application to use the native API of Avahi! Apr 28 20:53:57 volumio volumio[718]: *** WARNING *** For more information see Apr 28 20:53:57 volumio node[718]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Apr 28 20:53:57 volumio volumio[718]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Apr 28 20:53:57 volumio volumio[718]: *** WARNING *** Please fix your application to use the native API of Avahi! Apr 28 20:53:57 volumio volumio[718]: *** WARNING *** For more information see Apr 28 20:53:57 volumio node[718]: *** WARNING *** Please fix your application to use the native API of Avahi! Apr 28 20:53:57 volumio node[718]: *** WARNING *** For more information see Apr 28 20:53:57 volumio node[718]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Apr 28 20:53:57 volumio node[718]: *** WARNING *** Please fix your application to use the native API of Avahi! Apr 28 20:53:57 volumio node[718]: *** WARNING *** For more information see Apr 28 20:53:57 volumio volumio[718]: info: Applying required configuration parameters for plugin volumiodiscovery Apr 28 20:53:57 volumio volumio[718]: info: Discovery: Started advertising with name: Volumio Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "outputs"... Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "albumart"... Apr 28 20:53:57 volumio kernel: usb usb2-port4: over-current change #50 Apr 28 20:53:57 volumio kernel: usb 1-1-port4: over-current change #49 Apr 28 20:53:57 volumio kernel: usb usb2-port1: over-current change #55 Apr 28 20:53:57 volumio volumio[718]: info: Plugin example_plugin is not enabled Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "inputs"... Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "updater_comm"... Apr 28 20:53:57 volumio volumio-remote-updater[481]: [2024-04-28 20:53:57] [connect] Successful connection Apr 28 20:53:57 volumio kernel: usb 1-1-port1: over-current change #53 Apr 28 20:53:57 volumio volumio[718]: info: Plugin mpdemulation is not enabled Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "rest_api"... Apr 28 20:53:57 volumio volumio[718]: info: Loading plugin "websocket"... Apr 28 20:53:57 volumio kernel: usb usb2-port2: over-current change #54 Apr 28 20:53:57 volumio volumio[718]: info: Loading i18n strings for locale ru Apr 28 20:53:57 volumio volumio[718]: Updating browse sources language Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Apr 28 20:53:57 volumio volumio[718]: Forking 3 albumart workers Apr 28 20:53:57 volumio kernel: usb 1-1-port2: over-current change #52 Apr 28 20:53:57 volumio kernel: usb usb2-port3: over-current change #53 Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::initPlayerControls Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Apr 28 20:53:57 volumio volumio[718]: Express server listening on port 3000 Apr 28 20:53:57 volumio volumio[718]: [Metrics] WebUI: 16s 680.32ms Apr 28 20:53:57 volumio volumio[718]: info: CoreStateMachine::resetVolumioState Apr 28 20:53:57 volumio volumio[718]: info: CoreStateMachine::getcurrentVolume Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::volumioRetrievevolume Apr 28 20:53:57 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Apr 28 20:53:58 volumio kernel: usb 1-1-port3: over-current change #51 Apr 28 20:53:58 volumio kernel: usb usb2-port4: over-current change #51 Apr 28 20:53:58 volumio volumio[718]: Starting albumart workers Apr 28 20:53:58 volumio volumio[718]: Starting albumart workers Apr 28 20:53:58 volumio volumio[718]: Starting albumart workers Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 1 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 2 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 3 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 4 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 5 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 6 Apr 28 20:53:58 volumio volumio-remote-updater[481]: [2024-04-28 20:53:58] [connect] WebSocket Connection 127.0.0.1:3000 v-2 "WebSocket++/0.8.2" /socket.io/?EIO=4&transport=websocket&t=1714326837 101 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: WebSocket++/0.8.2 Total Clients: 7 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 8 Apr 28 20:53:58 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 9 Apr 28 20:53:58 volumio volumio[718]: info: Reloading queue from file Apr 28 20:53:58 volumio volumio[718]: info: CoreStateMachine::setRepeat true single undefined Apr 28 20:53:58 volumio volumio[718]: info: CoreStateMachine::pushState Apr 28 20:53:58 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::volumioPushState Apr 28 20:53:58 volumio volumio[718]: info: CoreStateMachine::setRandom true Apr 28 20:53:58 volumio volumio[718]: info: CoreStateMachine::pushState Apr 28 20:53:58 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::volumioPushState Apr 28 20:53:58 volumio volumio[718]: info: VolumeController:: Volume=82 Mute =false Apr 28 20:53:58 volumio volumio[718]: info: CoreStateMachine::pushState Apr 28 20:53:58 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::volumioPushState Apr 28 20:53:58 volumio volumio[718]: info: CoreStateMachine::updateTrackBlock Apr 28 20:53:58 volumio volumio[718]: info: CorePlayQueue::getTrackBlock Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::volumioRetrievevolume Apr 28 20:53:58 volumio volumio[718]: info: Setting Device type: Raspberry PI Apr 28 20:53:58 volumio volumio[718]: info: Discovery: adding d8e02d11-63f1-4343-b064-64739c1c7b2f Apr 28 20:53:58 volumio volumio[718]: info: Discovery: Found device Volumio Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::volumioGetState Apr 28 20:53:58 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:58 volumio volumio[718]: info: VolumeController:: Volume=82 Mute =false Apr 28 20:53:58 volumio volumio[718]: info: CoreStateMachine::pushState Apr 28 20:53:58 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:58 volumio volumio[718]: info: CoreCommandRouter::volumioPushState Apr 28 20:53:58 volumio kernel: usb 1-1.2: new high-speed USB device number 4 using xhci_hcd Apr 28 20:53:58 volumio kernel: hwmon hwmon1: Voltage normalised Apr 28 20:53:58 volumio kernel: usb 1-1.2: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 Apr 28 20:53:58 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Apr 28 20:53:58 volumio kernel: usb 1-1.2: Product: Cruzer Blade Apr 28 20:53:58 volumio kernel: usb 1-1.2: Manufacturer: SanDisk Apr 28 20:53:58 volumio kernel: usb 1-1.2: SerialNumber: 00002428040522014257 Apr 28 20:53:58 volumio kernel: usb-storage 1-1.2:1.0: USB Mass Storage device detected Apr 28 20:53:58 volumio kernel: scsi host0: usb-storage 1-1.2:1.0 Apr 28 20:53:58 volumio kernel: usb usb2-port1: over-current change #56 Apr 28 20:53:59 volumio kernel: usb 1-1-port1: over-current change #54 Apr 28 20:53:59 volumio kernel: usb usb2-port2: over-current change #55 Apr 28 20:53:59 volumio kernel: usb 1-1-port2: over-current change #53 Apr 28 20:53:59 volumio kernel: usb usb2-port3: over-current change #54 Apr 28 20:53:59 volumio kernel: usb 1-1-port3: over-current change #52 Apr 28 20:53:59 volumio kernel: usb usb2-port4: over-current change #52 Apr 28 20:53:59 volumio volumio[718]: verbose: New Socket.io Connection to 10.11.10.109 from 10.11.10.234 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:125.0) Gecko/20100101 Firefox/125.0 Total Clients: 10 Apr 28 20:53:59 volumio kernel: usb 1-1-port4: over-current change #50 Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: appearance , isLatestTOSAccepted Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::volumioGetVisibleSources Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Apr 28 20:53:59 volumio kernel: usb usb2-port1: over-current change #57 Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::volumioGetState Apr 28 20:53:59 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::volumioGetState Apr 28 20:53:59 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Apr 28 20:53:59 volumio volumio[718]: info: Received Get System Info Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Apr 28 20:53:59 volumio volumio[718]: info: Discovery: Getting this device information Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::volumioGetState Apr 28 20:53:59 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Apr 28 20:53:59 volumio volumio[718]: info: CoreCommandRouter::volumioGetState Apr 28 20:53:59 volumio volumio[718]: info: CorePlayQueue::getTrack 0 Apr 28 20:53:59 volumio volumio[718]: info: Listing playlists Apr 28 20:54:00 volumio kernel: usb 1-1-port1: over-current change #55 Apr 28 20:54:00 volumio kernel: usb usb2-port2: over-current change #56 Apr 28 20:54:00 volumio kernel: usb usb2-port3: over-current change #55 Apr 28 20:54:00 volumio kernel: usb 1-1-port2: over-current change #54 Apr 28 20:54:00 volumio kernel: usb usb2-port4: over-current change #53 Apr 28 20:54:00 volumio kernel: usb 1-1.2: USB disconnect, device number 4 Apr 28 20:54:00 volumio kernel: usb usb2-port1: over-current change #58 Apr 28 20:54:00 volumio kernel: usb 1-1-port3: over-current change #53 Apr 28 20:54:01 volumio kernel: usb usb2-port2: over-current change #57 Apr 28 20:54:01 volumio kernel: usb 1-1-port4: over-current change #51 Apr 28 20:54:01 volumio kernel: usb usb2-port3: over-current change #56 Apr 28 20:54:01 volumio kernel: usb 1-1-port1: over-current change #56 Apr 28 20:54:01 volumio kernel: usb usb2-port4: over-current change #54 Apr 28 20:54:01 volumio kernel: usb 1-1-port2: over-current change #55 Apr 28 20:54:01 volumio kernel: usb usb2-port1: over-current change #59 Apr 28 20:54:01 volumio kernel: usb 1-1-port3: over-current change #54 Apr 28 20:54:02 volumio kernel: usb usb2-port2: over-current change #58 Apr 28 20:54:02 volumio kernel: usb 1-1-port4: over-current change #52 Apr 28 20:54:02 volumio kernel: usb usb2-port3: over-current change #57 Apr 28 20:54:02 volumio kernel: usb 1-1-port1: over-current change #57 Apr 28 20:54:02 volumio kernel: usb usb2-port4: over-current change #55 Apr 28 20:54:02 volumio kernel: usb 1-1-port2: over-current change #56 Apr 28 20:54:02 volumio kernel: usb usb2-port1: over-current change #60 Apr 28 20:54:02 volumio sudo[892]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Apr 28 20:54:02 volumio sudo[892]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:54:02 volumio sudo[892]: pam_unix(sudo:session): session closed for user root Apr 28 20:54:02 volumio kernel: usb 1-1-port3: over-current change #55 Apr 28 20:54:02 volumio sudo[894]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Apr 28 20:54:02 volumio sudo[894]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:54:02 volumio sudo[894]: pam_unix(sudo:session): session closed for user root Apr 28 20:54:02 volumio sudo[898]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start upmpdcli.service Apr 28 20:54:02 volumio sudo[898]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:54:02 volumio systemd[1]: Started UPnP Renderer front-end to MPD. Apr 28 20:54:02 volumio sudo[898]: pam_unix(sudo:session): session closed for user root Apr 28 20:54:03 volumio volumio[718]: info: Upmpdcli Daemon Started Apr 28 20:54:03 volumio kernel: hwmon hwmon1: Undervoltage detected! Apr 28 20:54:03 volumio volumio[718]: error: Upnp client error: Error: connect ECONNREFUSED 127.0.0.1:6600 Apr 28 20:54:03 volumio kernel: usb usb2-port2: over-current change #59 Apr 28 20:54:03 volumio kernel: usb 1-1-port4: over-current change #53 Apr 28 20:54:03 volumio kernel: usb usb2-port3: over-current change #58 Apr 28 20:54:03 volumio systemd[1]: systemd-hostnamed.service: Succeeded. Apr 28 20:54:03 volumio kernel: usb 1-1-port1: over-current change #58 Apr 28 20:54:03 volumio kernel: usb usb2-port4: over-current change #56 Apr 28 20:54:03 volumio kernel: usb 1-1-port2: over-current change #57 Apr 28 20:54:03 volumio kernel: usb usb2-port1: over-current change #61 Apr 28 20:54:03 volumio kernel: usb 1-1-port3: over-current change #56 Apr 28 20:54:04 volumio kernel: usb usb2-port2: over-current change #60 Apr 28 20:54:04 volumio kernel: usb 1-1-port4: over-current change #54 Apr 28 20:54:04 volumio kernel: usb usb2-port3: over-current change #59 Apr 28 20:54:04 volumio kernel: usb 1-1-port1: over-current change #59 Apr 28 20:54:04 volumio kernel: usb usb2-port4: over-current change #57 Apr 28 20:54:04 volumio kernel: usb 1-1-port2: over-current change #58 Apr 28 20:54:04 volumio kernel: usb usb2-port1: over-current change #62 Apr 28 20:54:04 volumio kernel: usb 1-1-port3: over-current change #57 Apr 28 20:54:04 volumio kernel: usb usb2-port2: over-current change #61 Apr 28 20:54:05 volumio kernel: usb 1-1-port4: over-current change #55 Apr 28 20:54:05 volumio kernel: usb usb2-port3: over-current change #60 Apr 28 20:54:05 volumio kernel: usb 1-1-port1: over-current change #60 Apr 28 20:54:05 volumio kernel: usb usb2-port4: over-current change #58 Apr 28 20:54:05 volumio kernel: usb 1-1-port2: over-current change #59 Apr 28 20:54:05 volumio kernel: usb usb2-port1: over-current change #63 Apr 28 20:54:05 volumio kernel: usb 1-1-port3: over-current change #58 Apr 28 20:54:05 volumio kernel: usb usb2-port2: over-current change #62 Apr 28 20:54:06 volumio kernel: usb 1-1-port4: over-current change #56 Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::getUIConfigOnPlugin Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: system , getAdvancedSettingsStatus Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::volumioGetBrowseSources Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::volumioGetBrowseSources Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::volumioGetBrowseSources Apr 28 20:54:06 volumio kernel: usb usb2-port3: over-current change #61 Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , getMyCollectionStats Apr 28 20:54:06 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: networkfs , listShares Apr 28 20:54:06 volumio kernel: usb 1-1-port1: over-current change #61 Apr 28 20:54:06 volumio kernel: usb usb2-port4: over-current change #59 Apr 28 20:54:06 volumio kernel: usb 1-1-port2: over-current change #60 Apr 28 20:54:06 volumio kernel: usb usb2-port1: over-current change #64 Apr 28 20:54:06 volumio kernel: usb 1-1-port3: over-current change #59 Apr 28 20:54:06 volumio kernel: usb usb2-port2: over-current change #63 Apr 28 20:54:06 volumio kernel: usb 1-1-port4: over-current change #57 Apr 28 20:54:07 volumio volumio[718]: error: Upnp client error: Error: connect ECONNREFUSED 127.0.0.1:6600 Apr 28 20:54:07 volumio kernel: usb usb2-port3: over-current change #62 Apr 28 20:54:07 volumio kernel: usb 1-1-port1: over-current change #62 Apr 28 20:54:07 volumio kernel: usb usb2-port4: over-current change #60 Apr 28 20:54:07 volumio kernel: usb 1-1-port2: over-current change #61 Apr 28 20:54:07 volumio volumio[718]: info: CoreCommandRouter::executeOnPlugin: mpd , rescanDb Apr 28 20:54:07 volumio volumio[718]: verbose: ControllerMpd::sendMpdCommand rescan Apr 28 20:54:07 volumio volumio[718]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Apr 28 20:54:07 volumio kernel: usb usb2-port1: over-current change #65 Apr 28 20:54:07 volumio volumio[718]: TypeError: Cannot read property 'then' of undefined Apr 28 20:54:07 volumio volumio[718]: at ControllerMpd.sendMpdCommand (/volumio/app/plugins/music_service/mpd/index.js:331:6) Apr 28 20:54:07 volumio volumio[718]: at ControllerMpd.rescanDb (/volumio/app/plugins/music_service/mpd/index.js:1885:15) Apr 28 20:54:07 volumio volumio[718]: at CoreCommandRouter.executeOnPlugin (/volumio/app/index.js:1077:32) Apr 28 20:54:07 volumio volumio[718]: at Socket. (/volumio/app/plugins/user_interface/websocket/index.js:1045:26) Apr 28 20:54:07 volumio volumio[718]: at Socket.emit (events.js:315:20) Apr 28 20:54:07 volumio volumio[718]: at /volumio/node_modules/socket.io/lib/socket.js:503:12 Apr 28 20:54:07 volumio volumio[718]: at processTicksAndRejections (internal/process/task_queues.js:75:11) Apr 28 20:54:07 volumio volumio[718]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Apr 28 20:54:07 volumio kernel: usb 1-1-port3: over-current change #60 Apr 28 20:54:07 volumio kernel: usb usb2-port1: over-current condition Apr 28 20:54:07 volumio kernel: usb usb2-port2: over-current change #64 Apr 28 20:54:07 volumio kernel: usb 1-1-port4: over-current change #58 Apr 28 20:54:08 volumio kernel: usb usb2-port3: over-current change #63 Apr 28 20:54:08 volumio kernel: usb 1-1-port1: over-current change #63 Apr 28 20:54:08 volumio kernel: usb usb2-port4: over-current change #61 Apr 28 20:54:08 volumio sudo[912]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/journalctl --since=2024-04-28 20:53 Apr 28 20:54:08 volumio sudo[912]: pam_unix(sudo:session): session opened for user root by (uid=0) Apr 28 20:54:08 volumio kernel: usb 1-1-port2: over-current change #62 PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" VOLUMIO_BUILD_VERSION="7f9f1bf001add7a8b19a4516e3c74ef598b2730d" VOLUMIO_FE_VERSION="614d7b13ffdcb0cc5a6072e7d06f59d52e323e71" VOLUMIO_FE3_VERSION="570aaed971c1346d45d1172dc445b086b258c6d1" VOLUMIO_BE_VERSION="512433c3e91cdaed7ecd2808b21adeffc2137d7f" VOLUMIO_ARCH="arm" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Wed 21 Feb 2024 09:37:22 PM CET" VOLUMIO_VERSION="3.631" VOLUMIO_HARDWARE="pi" VOLUMIO_DEVICENAME="Raspberry Pi" VOLUMIO_HASH="fdd9dd1169c06c1ad0a30ddd24c91b6b"