-- Logs begin at Sat 2025-08-30 11:20:19 +02, end at Sat 2025-08-30 11:21:44 +02. -- Aug 30 11:20:19 volumio-se kernel: Linux version 6.6.32-volumio (gkkpch@UbuntuVM24.04) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #2 SMP PREEMPT_DYNAMIC Wed May 29 23:04:42 CEST 2024 Aug 30 11:20:19 volumio-se kernel: Command line: BOOT_IMAGE=/vmlinuz initramfs.clear splash plymouth.ignore-serial-consoles quiet loglevel=0 biosdevname=0 imgpart=UUID=f730755b-3881-4204-852d-dfd4e1b8f9ca bootpart=UUID=EC94-4E40 datapart=UUID=224731fe-5fbb-4682-9f5d-38fa57114a4a hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh logo.nologo vt.global_cursor_default=0 acpi_backlight=vendor net.ifnames=0 use_kmsg=no Aug 30 11:20:19 volumio-se kernel: KERNEL supported cpus: Aug 30 11:20:19 volumio-se kernel: Intel GenuineIntel Aug 30 11:20:19 volumio-se kernel: AMD AuthenticAMD Aug 30 11:20:19 volumio-se kernel: Hygon HygonGenuine Aug 30 11:20:19 volumio-se kernel: Centaur CentaurHauls Aug 30 11:20:19 volumio-se kernel: zhaoxin Shanghai Aug 30 11:20:19 volumio-se kernel: BIOS-provided physical RAM map: Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000009afffff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000009b00000-0x0000000009dfffff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000009e00000-0x0000000009efffff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0afff] ACPI NVS Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000009f0b000-0x00000000970f8fff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000970f9000-0x0000000097af8fff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000097af9000-0x00000000add0efff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000add0f000-0x00000000ae0defff] type 20 Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000ae0df000-0x00000000aee8efff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000aee8f000-0x00000000af77efff] ACPI NVS Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000af77f000-0x00000000af7fefff] ACPI data Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000fdc00000-0x00000000fec00fff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x00000000ff800000-0x00000000fff3ffff] reserved Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x0000000100000000-0x000000020effffff] usable Aug 30 11:20:19 volumio-se kernel: BIOS-e820: [mem 0x000000020f000000-0x000000024effffff] reserved Aug 30 11:20:19 volumio-se kernel: NX (Execute Disable) protection: active Aug 30 11:20:19 volumio-se kernel: APIC: Static calls initialized Aug 30 11:20:19 volumio-se kernel: efi: EFI v2.7 by HUAWEI Aug 30 11:20:19 volumio-se kernel: efi: ACPI=0xaf7fe000 ACPI 2.0=0xaf7fe014 TPMFinalLog=0xaf358000 SMBIOS=0xae2e0000 SMBIOS 3.0=0xae2de000 ESRT=0xae2dc018 MEMATTR=0x9e4ae018 Aug 30 11:20:19 volumio-se kernel: efi: Remove mem48: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map Aug 30 11:20:19 volumio-se kernel: e820: remove [mem 0xf8000000-0xfbffffff] reserved Aug 30 11:20:19 volumio-se kernel: efi: Remove mem49: MMIO range=[0xfdc00000-0xfec00fff] (16MB) from e820 map Aug 30 11:20:19 volumio-se kernel: e820: remove [mem 0xfdc00000-0xfec00fff] reserved Aug 30 11:20:19 volumio-se kernel: efi: Not removing mem50: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map Aug 30 11:20:19 volumio-se kernel: efi: Not removing mem51: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map Aug 30 11:20:19 volumio-se kernel: efi: Not removing mem52: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map Aug 30 11:20:19 volumio-se kernel: efi: Remove mem53: MMIO range=[0xff800000-0xfff3ffff] (7MB) from e820 map Aug 30 11:20:19 volumio-se kernel: e820: remove [mem 0xff800000-0xfff3ffff] reserved Aug 30 11:20:19 volumio-se kernel: SMBIOS 3.11.1 present. Aug 30 11:20:19 volumio-se kernel: DMI: HUAWEI BOHK-WAX9X/BOHK-WAX9X-PCB, BIOS 1.19 01/06/2023 Aug 30 11:20:19 volumio-se kernel: tsc: Fast TSC calibration using PIT Aug 30 11:20:19 volumio-se kernel: tsc: Detected 2096.080 MHz processor Aug 30 11:20:19 volumio-se kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Aug 30 11:20:19 volumio-se kernel: e820: remove [mem 0x000a0000-0x000fffff] usable Aug 30 11:20:19 volumio-se kernel: last_pfn = 0x20f000 max_arch_pfn = 0x400000000 Aug 30 11:20:19 volumio-se kernel: MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs Aug 30 11:20:19 volumio-se kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Aug 30 11:20:19 volumio-se kernel: last_pfn = 0xaf800 max_arch_pfn = 0x400000000 Aug 30 11:20:19 volumio-se kernel: esrt: Reserving ESRT space from 0x00000000ae2dc018 to 0x00000000ae2dc050. Aug 30 11:20:19 volumio-se kernel: Using GB pages for direct mapping Aug 30 11:20:19 volumio-se kernel: Secure boot could not be determined Aug 30 11:20:19 volumio-se kernel: RAMDISK: [mem 0x2fae7000-0x33d6afff] Aug 30 11:20:19 volumio-se kernel: ACPI: Early table checksum verification disabled Aug 30 11:20:19 volumio-se kernel: ACPI: RSDP 0x00000000AF7FE014 000024 (v02 HUAWEI) Aug 30 11:20:19 volumio-se kernel: ACPI: XSDT 0x00000000AF7CA188 0000F4 (v01 HUAWEI EDK2 00000002 01000013) Aug 30 11:20:19 volumio-se kernel: ACPI: FACP 0x00000000AF7F3000 00010C (v05 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: DSDT 0x00000000AF7E2000 00A2F9 (v01 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: FACS 0x00000000AF357000 000040 Aug 30 11:20:19 volumio-se kernel: ACPI: UEFI 0x00000000AF77D000 000236 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7F7000 005419 (v02 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: MSDM 0x00000000AF7F6000 000055 (v03 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: ASF! 0x00000000AF7F5000 0000A5 (v32 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: BOOT 0x00000000AF7F4000 000028 (v01 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: HPET 0x00000000AF7F2000 000038 (v01 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: APIC 0x00000000AF7F1000 000138 (v03 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: MCFG 0x00000000AF7F0000 00003C (v01 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: WSMT 0x00000000AF7ED000 000028 (v01 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7E1000 000080 (v01 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: VFCT 0x00000000AF7D2000 00D484 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7D1000 00046D (v01 HUAWEI EDK2 00001000 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: TPM2 0x00000000AF7D0000 000034 (v04 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: IVRS 0x00000000AF7CF000 00013E (v02 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7CD000 00119C (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: CRAT 0x00000000AF7CC000 000810 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: CDIT 0x00000000AF7CB000 000029 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7FD000 000A26 (v01 HUAWEI EDK2 00001000 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7C9000 000C77 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7C7000 0010A5 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7C5000 001C69 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: FPDT 0x00000000AF7C4000 000044 (v01 HUAWEI EDK2 00000002 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7EF000 000164 (v01 HUAWEI EDK2 00001000 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: SSDT 0x00000000AF7EE000 0002EA (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: BGRT 0x00000000AF7C3000 000038 (v01 HUAWEI EDK2 00000001 ACPI 00040000) Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving FACP table memory at [mem 0xaf7f3000-0xaf7f310b] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving DSDT table memory at [mem 0xaf7e2000-0xaf7ec2f8] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving FACS table memory at [mem 0xaf357000-0xaf35703f] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving UEFI table memory at [mem 0xaf77d000-0xaf77d235] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7f7000-0xaf7fc418] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving MSDM table memory at [mem 0xaf7f6000-0xaf7f6054] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving ASF! table memory at [mem 0xaf7f5000-0xaf7f50a4] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving BOOT table memory at [mem 0xaf7f4000-0xaf7f4027] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving HPET table memory at [mem 0xaf7f2000-0xaf7f2037] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving APIC table memory at [mem 0xaf7f1000-0xaf7f1137] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving MCFG table memory at [mem 0xaf7f0000-0xaf7f003b] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving WSMT table memory at [mem 0xaf7ed000-0xaf7ed027] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7e1000-0xaf7e107f] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving VFCT table memory at [mem 0xaf7d2000-0xaf7df483] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7d1000-0xaf7d146c] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving TPM2 table memory at [mem 0xaf7d0000-0xaf7d0033] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving IVRS table memory at [mem 0xaf7cf000-0xaf7cf13d] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7cd000-0xaf7ce19b] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving CRAT table memory at [mem 0xaf7cc000-0xaf7cc80f] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving CDIT table memory at [mem 0xaf7cb000-0xaf7cb028] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7fd000-0xaf7fda25] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7c9000-0xaf7c9c76] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7c7000-0xaf7c80a4] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7c5000-0xaf7c6c68] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving FPDT table memory at [mem 0xaf7c4000-0xaf7c4043] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7ef000-0xaf7ef163] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving SSDT table memory at [mem 0xaf7ee000-0xaf7ee2e9] Aug 30 11:20:19 volumio-se kernel: ACPI: Reserving BGRT table memory at [mem 0xaf7c3000-0xaf7c3037] Aug 30 11:20:19 volumio-se kernel: Zone ranges: Aug 30 11:20:19 volumio-se kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff] Aug 30 11:20:19 volumio-se kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Aug 30 11:20:19 volumio-se kernel: Normal [mem 0x0000000100000000-0x000000020effffff] Aug 30 11:20:19 volumio-se kernel: Movable zone start for each node Aug 30 11:20:19 volumio-se kernel: Early memory node ranges Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x0000000000001000-0x0000000000086fff] Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x0000000000088000-0x000000000009ffff] Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x0000000000100000-0x0000000009afffff] Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x0000000009e00000-0x0000000009efffff] Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x0000000009f0b000-0x00000000970f8fff] Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x0000000097af9000-0x00000000add0efff] Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x00000000af7ff000-0x00000000af7fffff] Aug 30 11:20:19 volumio-se kernel: node 0: [mem 0x0000000100000000-0x000000020effffff] Aug 30 11:20:19 volumio-se kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000020effffff] Aug 30 11:20:19 volumio-se kernel: On node 0, zone DMA: 1 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone DMA: 1 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone DMA: 96 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone DMA32: 768 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone DMA32: 11 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone DMA32: 2560 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone DMA32: 6896 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone Normal: 2048 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: On node 0, zone Normal: 4096 pages in unavailable ranges Aug 30 11:20:19 volumio-se kernel: ACPI: PM-Timer IO Port: 0x408 Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) Aug 30 11:20:19 volumio-se kernel: IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23 Aug 30 11:20:19 volumio-se kernel: IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55 Aug 30 11:20:19 volumio-se kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Aug 30 11:20:19 volumio-se kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Aug 30 11:20:19 volumio-se kernel: ACPI: Using ACPI (MADT) for SMP configuration information Aug 30 11:20:19 volumio-se kernel: ACPI: HPET id: 0x10228210 base: 0xfed00000 Aug 30 11:20:19 volumio-se kernel: e820: update [mem 0x9e4b3000-0x9e4dbfff] usable ==> reserved Aug 30 11:20:19 volumio-se kernel: smpboot: 16 Processors exceeds NR_CPUS limit of 8 Aug 30 11:20:19 volumio-se kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x00087000-0x00087fff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000bffff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x09b00000-0x09dfffff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0afff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x970f9000-0x97af8fff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0x9e4b3000-0x9e4dbfff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xadd0f000-0xae0defff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xae0df000-0xaee8efff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xaee8f000-0xaf77efff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xaf77f000-0xaf7fefff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xaf800000-0xafffffff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xfec0ffff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] Aug 30 11:20:19 volumio-se kernel: PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] Aug 30 11:20:19 volumio-se kernel: [mem 0xb0000000-0xfec0ffff] available for PCI devices Aug 30 11:20:19 volumio-se kernel: Booting paravirtualized kernel on bare hardware Aug 30 11:20:19 volumio-se kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns Aug 30 11:20:19 volumio-se kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 Aug 30 11:20:19 volumio-se kernel: percpu: Embedded 56 pages/cpu s191400 r8192 d29784 u262144 Aug 30 11:20:19 volumio-se kernel: pcpu-alloc: s191400 r8192 d29784 u262144 alloc=1*2097152 Aug 30 11:20:19 volumio-se kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Aug 30 11:20:19 volumio-se kernel: Kernel command line: BOOT_IMAGE=/vmlinuz initramfs.clear splash plymouth.ignore-serial-consoles quiet loglevel=0 biosdevname=0 imgpart=UUID=f730755b-3881-4204-852d-dfd4e1b8f9ca bootpart=UUID=EC94-4E40 datapart=UUID=224731fe-5fbb-4682-9f5d-38fa57114a4a hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh logo.nologo vt.global_cursor_default=0 acpi_backlight=vendor net.ifnames=0 use_kmsg=no Aug 30 11:20:19 volumio-se kernel: Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz biosdevname=0 imgpart=UUID=f730755b-3881-4204-852d-dfd4e1b8f9ca bootpart=UUID=EC94-4E40 datapart=UUID=224731fe-5fbb-4682-9f5d-38fa57114a4a hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh use_kmsg=no", will be passed to user space. Aug 30 11:20:19 volumio-se kernel: random: crng init done Aug 30 11:20:19 volumio-se kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Aug 30 11:20:19 volumio-se kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) Aug 30 11:20:19 volumio-se kernel: Built 1 zonelists, mobility grouping on. Total pages: 1789956 Aug 30 11:20:19 volumio-se kernel: mem auto-init: stack:all(zero), heap alloc:off, heap free:off Aug 30 11:20:19 volumio-se kernel: software IO TLB: area num 8. Aug 30 11:20:19 volumio-se kernel: Memory: 6918688K/7274124K available (14336K kernel code, 1878K rwdata, 4640K rodata, 2988K init, 1148K bss, 355180K reserved, 0K cma-reserved) Aug 30 11:20:19 volumio-se kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Aug 30 11:20:19 volumio-se kernel: ftrace: allocating 40433 entries in 158 pages Aug 30 11:20:19 volumio-se kernel: ftrace: allocated 158 pages with 5 groups Aug 30 11:20:19 volumio-se kernel: Dynamic Preempt: voluntary Aug 30 11:20:19 volumio-se kernel: rcu: Preemptible hierarchical RCU implementation. Aug 30 11:20:19 volumio-se kernel: Trampoline variant of Tasks RCU enabled. Aug 30 11:20:19 volumio-se kernel: Rude variant of Tasks RCU enabled. Aug 30 11:20:19 volumio-se kernel: Tracing variant of Tasks RCU enabled. Aug 30 11:20:19 volumio-se kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Aug 30 11:20:19 volumio-se kernel: NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16 Aug 30 11:20:19 volumio-se kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention. Aug 30 11:20:19 volumio-se kernel: Console: colour dummy device 80x25 Aug 30 11:20:19 volumio-se kernel: printk: console [tty0] enabled Aug 30 11:20:19 volumio-se kernel: ACPI: Core revision 20230628 Aug 30 11:20:19 volumio-se kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns Aug 30 11:20:19 volumio-se kernel: APIC: Switch to symmetric I/O mode setup Aug 30 11:20:19 volumio-se kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Aug 30 11:20:19 volumio-se kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e36b9774c4, max_idle_ns: 440795203241 ns Aug 30 11:20:19 volumio-se kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.16 BogoMIPS (lpj=8384320) Aug 30 11:20:19 volumio-se kernel: AMD Zen1 DIV0 bug detected. Disable SMT for full protection. Aug 30 11:20:19 volumio-se kernel: LVT offset 1 assigned for vector 0xf9 Aug 30 11:20:19 volumio-se kernel: LVT offset 2 assigned for vector 0xf4 Aug 30 11:20:19 volumio-se kernel: process: using mwait in idle threads Aug 30 11:20:19 volumio-se kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 Aug 30 11:20:19 volumio-se kernel: Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 Aug 30 11:20:19 volumio-se kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Aug 30 11:20:19 volumio-se kernel: Spectre V2 : Mitigation: Retpolines Aug 30 11:20:19 volumio-se kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Aug 30 11:20:19 volumio-se kernel: Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT Aug 30 11:20:19 volumio-se kernel: Spectre V2 : Enabling Speculation Barrier for firmware calls Aug 30 11:20:19 volumio-se kernel: RETBleed: Mitigation: untrained return thunk Aug 30 11:20:19 volumio-se kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier Aug 30 11:20:19 volumio-se kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl Aug 30 11:20:19 volumio-se kernel: Speculative Return Stack Overflow: Mitigation: Safe RET Aug 30 11:20:19 volumio-se kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' Aug 30 11:20:19 volumio-se kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' Aug 30 11:20:19 volumio-se kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' Aug 30 11:20:19 volumio-se kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 Aug 30 11:20:19 volumio-se kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. Aug 30 11:20:19 volumio-se kernel: Freeing SMP alternatives memory: 32K Aug 30 11:20:19 volumio-se kernel: pid_max: default: 32768 minimum: 301 Aug 30 11:20:19 volumio-se kernel: LSM: initializing lsm=capability,yama,integrity Aug 30 11:20:19 volumio-se kernel: Yama: becoming mindful. Aug 30 11:20:19 volumio-se kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Aug 30 11:20:19 volumio-se kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Aug 30 11:20:19 volumio-se kernel: smpboot: CPU0: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x18, stepping: 0x1) Aug 30 11:20:19 volumio-se kernel: RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. Aug 30 11:20:19 volumio-se kernel: RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. Aug 30 11:20:19 volumio-se kernel: RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. Aug 30 11:20:19 volumio-se kernel: Performance Events: Fam17h+ core perfctr, AMD PMU driver. Aug 30 11:20:19 volumio-se kernel: ... version: 0 Aug 30 11:20:19 volumio-se kernel: ... bit width: 48 Aug 30 11:20:19 volumio-se kernel: ... generic registers: 6 Aug 30 11:20:19 volumio-se kernel: ... value mask: 0000ffffffffffff Aug 30 11:20:19 volumio-se kernel: ... max period: 00007fffffffffff Aug 30 11:20:19 volumio-se kernel: ... fixed-purpose events: 0 Aug 30 11:20:19 volumio-se kernel: ... event mask: 000000000000003f Aug 30 11:20:19 volumio-se kernel: signal: max sigframe size: 1776 Aug 30 11:20:19 volumio-se kernel: rcu: Hierarchical SRCU implementation. Aug 30 11:20:19 volumio-se kernel: rcu: Max phase no-delay instances is 1000. Aug 30 11:20:19 volumio-se kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. Aug 30 11:20:19 volumio-se kernel: smp: Bringing up secondary CPUs ... Aug 30 11:20:19 volumio-se kernel: smpboot: x86: Booting SMP configuration: Aug 30 11:20:19 volumio-se kernel: .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 Aug 30 11:20:19 volumio-se kernel: smp: Brought up 1 node, 8 CPUs Aug 30 11:20:19 volumio-se kernel: smpboot: Max logical packages: 2 Aug 30 11:20:19 volumio-se kernel: smpboot: Total of 8 processors activated (33537.28 BogoMIPS) Aug 30 11:20:19 volumio-se kernel: devtmpfs: initialized Aug 30 11:20:19 volumio-se kernel: x86/mm: Memory block size: 128MB Aug 30 11:20:19 volumio-se kernel: ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0afff] (45056 bytes) Aug 30 11:20:19 volumio-se kernel: ACPI: PM: Registering ACPI NVS region [mem 0xaee8f000-0xaf77efff] (9371648 bytes) Aug 30 11:20:19 volumio-se kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Aug 30 11:20:19 volumio-se kernel: futex hash table entries: 2048 (order: 5, 131072 bytes, linear) Aug 30 11:20:19 volumio-se kernel: pinctrl core: initialized pinctrl subsystem Aug 30 11:20:19 volumio-se kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family Aug 30 11:20:19 volumio-se kernel: audit: initializing netlink subsys (disabled) Aug 30 11:20:19 volumio-se kernel: audit: type=2000 audit(1756545584.176:1): state=initialized audit_enabled=0 res=1 Aug 30 11:20:19 volumio-se kernel: thermal_sys: Registered thermal governor 'fair_share' Aug 30 11:20:19 volumio-se kernel: thermal_sys: Registered thermal governor 'bang_bang' Aug 30 11:20:19 volumio-se kernel: thermal_sys: Registered thermal governor 'step_wise' Aug 30 11:20:19 volumio-se kernel: thermal_sys: Registered thermal governor 'user_space' Aug 30 11:20:19 volumio-se kernel: EISA bus registered Aug 30 11:20:19 volumio-se kernel: cpuidle: using governor ladder Aug 30 11:20:19 volumio-se kernel: cpuidle: using governor menu Aug 30 11:20:19 volumio-se kernel: Simple Boot Flag at 0x44 set to 0x1 Aug 30 11:20:19 volumio-se kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Aug 30 11:20:19 volumio-se kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) Aug 30 11:20:19 volumio-se kernel: PCI: not using MMCONFIG Aug 30 11:20:19 volumio-se kernel: PCI: Using configuration type 1 for base access Aug 30 11:20:19 volumio-se kernel: PCI: Using configuration type 1 for extended access Aug 30 11:20:19 volumio-se kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Aug 30 11:20:19 volumio-se kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages Aug 30 11:20:19 volumio-se kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page Aug 30 11:20:19 volumio-se kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Aug 30 11:20:19 volumio-se kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page Aug 30 11:20:19 volumio-se kernel: ACPI: Added _OSI(Module Device) Aug 30 11:20:19 volumio-se kernel: ACPI: Added _OSI(Processor Device) Aug 30 11:20:19 volumio-se kernel: ACPI: Added _OSI(3.0 _SCP Extensions) Aug 30 11:20:19 volumio-se kernel: ACPI: Added _OSI(Processor Aggregator Device) Aug 30 11:20:19 volumio-se kernel: ACPI: 11 ACPI AML tables successfully acquired and loaded Aug 30 11:20:19 volumio-se kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored Aug 30 11:20:19 volumio-se kernel: ACPI: _OSC evaluation for CPUs failed, trying _PDC Aug 30 11:20:19 volumio-se kernel: ACPI: EC: EC started Aug 30 11:20:19 volumio-se kernel: ACPI: EC: interrupt blocked Aug 30 11:20:19 volumio-se kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 Aug 30 11:20:19 volumio-se kernel: ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions Aug 30 11:20:19 volumio-se kernel: ACPI: Interpreter enabled Aug 30 11:20:19 volumio-se kernel: ACPI: PM: (supports S0 S3 S4 S5) Aug 30 11:20:19 volumio-se kernel: ACPI: Using IOAPIC for interrupt routing Aug 30 11:20:19 volumio-se kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) Aug 30 11:20:19 volumio-se kernel: [Firmware Info]: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] not reserved in ACPI motherboard resources Aug 30 11:20:19 volumio-se kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as EfiMemoryMappedIO Aug 30 11:20:19 volumio-se kernel: MMCONFIG [mem 0xf8000000-0xfbffffff] reserved to work around lack of ACPI motherboard _CRS Aug 30 11:20:19 volumio-se kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Aug 30 11:20:19 volumio-se kernel: PCI: Ignoring E820 reservations for host bridge windows Aug 30 11:20:19 volumio-se kernel: ACPI: Enabled 4 GPEs in block 00 to 1F Aug 30 11:20:19 volumio-se kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Aug 30 11:20:19 volumio-se kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] Aug 30 11:20:19 volumio-se kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] Aug 30 11:20:19 volumio-se kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] Aug 30 11:20:19 volumio-se kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge Aug 30 11:20:19 volumio-se kernel: PCI host bridge to bus 0000:00 Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [mem 0xb0000000-0xf7ffffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: root bus resource [bus 00-ff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.3: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.3: PME# supported from D0 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: [1022:15d3] type 01 class 0x060400 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: PME# supported from D0 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 Aug 30 11:20:19 volumio-se kernel: pci 0000:01:00.0: [1179:011a] type 00 class 0x010802 Aug 30 11:20:19 volumio-se kernel: pci 0000:01:00.0: reg 0x10: [mem 0xc0700000-0xc0703fff 64bit] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.3: PCI bridge to [bus 01] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.3: bridge window [mem 0xc0700000-0xc07fffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:02:00.0: [10ec:c822] type 00 class 0x028000 Aug 30 11:20:19 volumio-se kernel: pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] Aug 30 11:20:19 volumio-se kernel: pci 0000:02:00.0: reg 0x18: [mem 0xc0600000-0xc060ffff 64bit] Aug 30 11:20:19 volumio-se kernel: pci 0000:02:00.0: supports D1 D2 Aug 30 11:20:19 volumio-se kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: PCI bridge to [bus 02] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: bridge window [io 0x2000-0x2fff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: bridge window [mem 0xc0600000-0xc06fffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: [1002:15d8] type 00 class 0x030000 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: reg 0x20: [io 0x1000-0x10ff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: reg 0x24: [mem 0xc0500000-0xc057ffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: BAR 0: assigned to efifb Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.1: [1002:15de] type 00 class 0x040300 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.1: reg 0x10: [mem 0xc05c8000-0xc05cbfff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.1: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.2: [1022:15df] type 00 class 0x108000 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.2: reg 0x18: [mem 0xc0400000-0xc04fffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.2: reg 0x24: [mem 0xc05cc000-0xc05cdfff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.2: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.3: [1022:15e0] type 00 class 0x0c0330 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.3: reg 0x10: [mem 0xc0300000-0xc03fffff 64bit] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.3: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.3: PME# supported from D0 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.4: [1022:15e1] type 00 class 0x0c0330 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.4: reg 0x10: [mem 0xc0200000-0xc02fffff 64bit] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.4: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.4: PME# supported from D0 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.5: reg 0x10: [mem 0xc0580000-0xc05bffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.5: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.5: PME# supported from D0 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.6: reg 0x10: [mem 0xc05c0000-0xc05c7fff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.6: enabling Extended Tags Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.6: PME# supported from D0 D3hot D3cold Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: PCI bridge to [bus 03] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: bridge window [mem 0xc0200000-0xc05fffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: on NUMA node 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKA disabled Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKB disabled Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKC disabled Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKD disabled Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKE disabled Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKF disabled Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKG disabled Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 0 Aug 30 11:20:19 volumio-se kernel: ACPI: PCI: Interrupt link LNKH disabled Aug 30 11:20:19 volumio-se kernel: ACPI: EC: interrupt unblocked Aug 30 11:20:19 volumio-se kernel: ACPI: EC: event unblocked Aug 30 11:20:19 volumio-se kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 Aug 30 11:20:19 volumio-se kernel: ACPI: EC: GPE=0x3 Aug 30 11:20:19 volumio-se kernel: ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete Aug 30 11:20:19 volumio-se kernel: ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events Aug 30 11:20:19 volumio-se kernel: iommu: Default domain type: Translated Aug 30 11:20:19 volumio-se kernel: iommu: DMA domain TLB invalidation policy: lazy mode Aug 30 11:20:19 volumio-se kernel: SCSI subsystem initialized Aug 30 11:20:19 volumio-se kernel: libata version 3.00 loaded. Aug 30 11:20:19 volumio-se kernel: ACPI: bus type USB registered Aug 30 11:20:19 volumio-se kernel: usbcore: registered new interface driver usbfs Aug 30 11:20:19 volumio-se kernel: usbcore: registered new interface driver hub Aug 30 11:20:19 volumio-se kernel: usbcore: registered new device driver usb Aug 30 11:20:19 volumio-se kernel: efivars: Registered efivars operations Aug 30 11:20:19 volumio-se kernel: PCI: Using ACPI for IRQ routing Aug 30 11:20:19 volumio-se kernel: PCI: pci_cache_line_size set to 64 bytes Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0x00087000-0x0008ffff] Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0x09b00000-0x0bffffff] Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff] Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0x970f9000-0x97ffffff] Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0x9e4b3000-0x9fffffff] Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0xadd0f000-0xafffffff] Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0xaf800000-0xafffffff] Aug 30 11:20:19 volumio-se kernel: e820: reserve RAM buffer [mem 0x20f000000-0x20fffffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: vgaarb: setting as boot VGA device Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: vgaarb: bridge control possible Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none Aug 30 11:20:19 volumio-se kernel: vgaarb: loaded Aug 30 11:20:19 volumio-se kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Aug 30 11:20:19 volumio-se kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter Aug 30 11:20:19 volumio-se kernel: clocksource: Switched to clocksource tsc-early Aug 30 11:20:19 volumio-se kernel: VFS: Disk quotas dquot_6.6.0 Aug 30 11:20:19 volumio-se kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Aug 30 11:20:19 volumio-se kernel: pnp: PnP ACPI init Aug 30 11:20:19 volumio-se kernel: system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved Aug 30 11:20:19 volumio-se kernel: system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:00: [mem 0xfde00000-0xfdefffff] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x0400-0x04cf] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x04d0-0x04d1] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x04d6] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x0c00-0x0c01] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x0c14] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x0c50-0x0c52] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x0c6c] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x0c6f] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:03: [io 0x0cd0-0x0cdb] has been reserved Aug 30 11:20:19 volumio-se kernel: system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved Aug 30 11:20:19 volumio-se kernel: system 00:04: [mem 0xff800000-0xffffffff] has been reserved Aug 30 11:20:19 volumio-se kernel: pnp: PnP ACPI: found 5 devices Aug 30 11:20:19 volumio-se kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns Aug 30 11:20:19 volumio-se kernel: NET: Registered PF_INET protocol family Aug 30 11:20:19 volumio-se kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) Aug 30 11:20:19 volumio-se kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) Aug 30 11:20:19 volumio-se kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Aug 30 11:20:19 volumio-se kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) Aug 30 11:20:19 volumio-se kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) Aug 30 11:20:19 volumio-se kernel: TCP: Hash tables configured (established 65536 bind 65536) Aug 30 11:20:19 volumio-se kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) Aug 30 11:20:19 volumio-se kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) Aug 30 11:20:19 volumio-se kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.3: PCI bridge to [bus 01] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.3: bridge window [mem 0xc0700000-0xc07fffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: PCI bridge to [bus 02] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: bridge window [io 0x2000-0x2fff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:01.7: bridge window [mem 0xc0600000-0xc06fffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: PCI bridge to [bus 03] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: bridge window [mem 0xc0200000-0xc05fffff] Aug 30 11:20:19 volumio-se kernel: pci 0000:00:08.1: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: resource 9 [mem 0xb0000000-0xf7ffffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc05fffff] Aug 30 11:20:19 volumio-se kernel: pci_bus 0000:03: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref] Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec Aug 30 11:20:19 volumio-se kernel: pci 0000:03:00.4: quirk_usb_early_handoff+0x0/0x770 took 45142 usecs Aug 30 11:20:19 volumio-se kernel: PCI: CLS 64 bytes, default 64 Aug 30 11:20:19 volumio-se kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Aug 30 11:20:19 volumio-se kernel: software IO TLB: mapped [mem 0x00000000a93e4000-0x00000000ad3e4000] (64MB) Aug 30 11:20:19 volumio-se kernel: Trying to unpack rootfs image as initramfs... Aug 30 11:20:19 volumio-se kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer Aug 30 11:20:19 volumio-se kernel: RAPL PMU: hw unit of domain package 2^-16 Joules Aug 30 11:20:19 volumio-se kernel: amd_uncore: 4 amd_df counters detected Aug 30 11:20:19 volumio-se kernel: amd_uncore: 6 amd_l3 counters detected Aug 30 11:20:19 volumio-se kernel: Initialise system trusted keyrings Aug 30 11:20:19 volumio-se kernel: workingset: timestamp_bits=46 max_order=21 bucket_order=0 Aug 30 11:20:19 volumio-se kernel: zbud: loaded Aug 30 11:20:19 volumio-se kernel: Key type asymmetric registered Aug 30 11:20:19 volumio-se kernel: Asymmetric key parser 'x509' registered Aug 30 11:20:19 volumio-se kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Aug 30 11:20:19 volumio-se kernel: io scheduler mq-deadline registered Aug 30 11:20:19 volumio-se kernel: io scheduler kyber registered Aug 30 11:20:19 volumio-se kernel: pcieport 0000:00:01.3: PME: Signaling with IRQ 25 Aug 30 11:20:19 volumio-se kernel: pcieport 0000:00:01.3: AER: enabled with IRQ 25 Aug 30 11:20:19 volumio-se kernel: pcieport 0000:00:01.7: PME: Signaling with IRQ 26 Aug 30 11:20:19 volumio-se kernel: pcieport 0000:00:01.7: AER: enabled with IRQ 26 Aug 30 11:20:19 volumio-se kernel: pcieport 0000:00:08.1: PME: Signaling with IRQ 27 Aug 30 11:20:19 volumio-se kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Aug 30 11:20:19 volumio-se kernel: ACPI: AC: AC Adapter [ACAD] (off-line) Aug 30 11:20:19 volumio-se kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 Aug 30 11:20:19 volumio-se kernel: ACPI: button: Power Button [PWRB] Aug 30 11:20:19 volumio-se kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 Aug 30 11:20:19 volumio-se kernel: ACPI: button: Lid Switch [LID0] Aug 30 11:20:19 volumio-se kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 Aug 30 11:20:19 volumio-se kernel: ACPI: button: Power Button [PWRF] Aug 30 11:20:19 volumio-se kernel: Monitor-Mwait will be used to enter C-1 state Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C000: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C001: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C002: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C003: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C004: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C005: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C006: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: ACPI: \_PR_.C007: Found 2 idle states Aug 30 11:20:19 volumio-se kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Aug 30 11:20:19 volumio-se kernel: ACPI: battery: Slot [BAT1] (battery present) Aug 30 11:20:19 volumio-se kernel: Linux agpgart interface v0.103 Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.3: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1 Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410 Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.3: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2 Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed Aug 30 11:20:19 volumio-se kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 Aug 30 11:20:19 volumio-se kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 30 11:20:19 volumio-se kernel: usb usb1: Product: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: usb usb1: Manufacturer: Linux 6.6.32-volumio xhci-hcd Aug 30 11:20:19 volumio-se kernel: usb usb1: SerialNumber: 0000:03:00.3 Aug 30 11:20:19 volumio-se kernel: hub 1-0:1.0: USB hub found Aug 30 11:20:19 volumio-se kernel: hub 1-0:1.0: 4 ports detected Aug 30 11:20:19 volumio-se kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. Aug 30 11:20:19 volumio-se kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 Aug 30 11:20:19 volumio-se kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 30 11:20:19 volumio-se kernel: usb usb2: Product: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: usb usb2: Manufacturer: Linux 6.6.32-volumio xhci-hcd Aug 30 11:20:19 volumio-se kernel: usb usb2: SerialNumber: 0000:03:00.3 Aug 30 11:20:19 volumio-se kernel: hub 2-0:1.0: USB hub found Aug 30 11:20:19 volumio-se kernel: hub 2-0:1.0: 4 ports detected Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.4: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3 Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410 Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.4: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4 Aug 30 11:20:19 volumio-se kernel: xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed Aug 30 11:20:19 volumio-se kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 Aug 30 11:20:19 volumio-se kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 30 11:20:19 volumio-se kernel: usb usb3: Product: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: usb usb3: Manufacturer: Linux 6.6.32-volumio xhci-hcd Aug 30 11:20:19 volumio-se kernel: usb usb3: SerialNumber: 0000:03:00.4 Aug 30 11:20:19 volumio-se kernel: hub 3-0:1.0: USB hub found Aug 30 11:20:19 volumio-se kernel: hub 3-0:1.0: 2 ports detected Aug 30 11:20:19 volumio-se kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Aug 30 11:20:19 volumio-se kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 Aug 30 11:20:19 volumio-se kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 30 11:20:19 volumio-se kernel: usb usb4: Product: xHCI Host Controller Aug 30 11:20:19 volumio-se kernel: usb usb4: Manufacturer: Linux 6.6.32-volumio xhci-hcd Aug 30 11:20:19 volumio-se kernel: usb usb4: SerialNumber: 0000:03:00.4 Aug 30 11:20:19 volumio-se kernel: hub 4-0:1.0: USB hub found Aug 30 11:20:19 volumio-se kernel: hub 4-0:1.0: 1 port detected Aug 30 11:20:19 volumio-se kernel: i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 Aug 30 11:20:19 volumio-se kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Aug 30 11:20:19 volumio-se kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 30 11:20:19 volumio-se kernel: mousedev: PS/2 mouse device common for all mice Aug 30 11:20:19 volumio-se kernel: rtc_cmos 00:01: RTC can wake from S4 Aug 30 11:20:19 volumio-se kernel: rtc_cmos 00:01: registered as rtc0 Aug 30 11:20:19 volumio-se kernel: rtc_cmos 00:01: setting system clock to 2025-08-30T09:19:45 UTC (1756545585) Aug 30 11:20:19 volumio-se kernel: rtc_cmos 00:01: alarms up to one month, 114 bytes nvram Aug 30 11:20:19 volumio-se kernel: i2c_dev: i2c /dev entries driver Aug 30 11:20:19 volumio-se kernel: platform eisa.0: Probing EISA bus 0 Aug 30 11:20:19 volumio-se kernel: platform eisa.0: EISA: Cannot allocate resource for mainboard Aug 30 11:20:19 volumio-se kernel: ledtrig-cpu: registered to indicate activity on CPUs Aug 30 11:20:19 volumio-se kernel: efifb: probing for efifb Aug 30 11:20:19 volumio-se kernel: efifb: framebuffer at 0xb0000000, using 8128k, total 8128k Aug 30 11:20:19 volumio-se kernel: efifb: mode is 1920x1080x32, linelength=7680, pages=1 Aug 30 11:20:19 volumio-se kernel: efifb: scrolling: redraw Aug 30 11:20:19 volumio-se kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Aug 30 11:20:19 volumio-se kernel: Console: switching to colour frame buffer device 240x67 Aug 30 11:20:19 volumio-se kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Aug 30 11:20:19 volumio-se kernel: fb0: EFI VGA frame buffer device Aug 30 11:20:19 volumio-se kernel: NET: Registered PF_INET6 protocol family Aug 30 11:20:19 volumio-se kernel: Segment Routing with IPv6 Aug 30 11:20:19 volumio-se kernel: In-situ OAM (IOAM) with IPv6 Aug 30 11:20:19 volumio-se kernel: mip6: Mobile IPv6 Aug 30 11:20:19 volumio-se kernel: NET: Registered PF_PACKET protocol family Aug 30 11:20:19 volumio-se kernel: mpls_gso: MPLS GSO support Aug 30 11:20:19 volumio-se kernel: microcode: CPU2: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: CPU0: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: CPU1: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: CPU3: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: CPU7: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: CPU6: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: CPU5: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: CPU4: patch_level=0x08108109 Aug 30 11:20:19 volumio-se kernel: microcode: Microcode Update Driver: v2.2. Aug 30 11:20:19 volumio-se kernel: IPI shorthand broadcast: enabled Aug 30 11:20:19 volumio-se kernel: sched_clock: Marking stable (392069948, 277661)->(400828554, -8480945) Aug 30 11:20:19 volumio-se kernel: Loading compiled-in X.509 certificates Aug 30 11:20:19 volumio-se kernel: acpi_cpufreq: overriding BIOS provided _PSD data Aug 30 11:20:19 volumio-se kernel: clk: Disabling unused clocks Aug 30 11:20:19 volumio-se kernel: usb 1-2: new high-speed USB device number 2 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 3-1: new high-speed USB device number 2 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 3-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 Aug 30 11:20:19 volumio-se kernel: usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Aug 30 11:20:19 volumio-se kernel: usb 3-1: Product: USB2.0 HUB Aug 30 11:20:19 volumio-se kernel: usb 1-2: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00 Aug 30 11:20:19 volumio-se kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 11:20:19 volumio-se kernel: usb 1-2: Product: Mass Storage Device Aug 30 11:20:19 volumio-se kernel: usb 1-2: Manufacturer: JetFlash Aug 30 11:20:19 volumio-se kernel: usb 1-2: SerialNumber: AIJGKLAH Aug 30 11:20:19 volumio-se kernel: hub 3-1:1.0: USB hub found Aug 30 11:20:19 volumio-se kernel: hub 3-1:1.0: 4 ports detected Aug 30 11:20:19 volumio-se kernel: usb 1-3: new high-speed USB device number 3 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 3-2: new full-speed USB device number 3 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 1-3: New USB device found, idVendor=20b1, idProduct=302b, bcdDevice= 2.01 Aug 30 11:20:19 volumio-se kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 11:20:19 volumio-se kernel: usb 1-3: Product: Shanling UA3 Aug 30 11:20:19 volumio-se kernel: usb 1-3: Manufacturer: Shanling Aug 30 11:20:19 volumio-se kernel: usb 1-3: SerialNumber: Shanling UA3 Aug 30 11:20:19 volumio-se kernel: usb 3-2: New USB device found, idVendor=1358, idProduct=c123, bcdDevice= 0.00 Aug 30 11:20:19 volumio-se kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 11:20:19 volumio-se kernel: usb 3-2: Product: Bluetooth Radio Aug 30 11:20:19 volumio-se kernel: usb 3-2: Manufacturer: Realtek Aug 30 11:20:19 volumio-se kernel: usb 3-2: SerialNumber: 00e04c000001 Aug 30 11:20:19 volumio-se kernel: Freeing initrd memory: 68112K Aug 30 11:20:19 volumio-se kernel: Freeing unused kernel image (initmem) memory: 2988K Aug 30 11:20:19 volumio-se kernel: Write protecting the kernel read-only data: 20480k Aug 30 11:20:19 volumio-se kernel: Freeing unused kernel image (rodata/data gap) memory: 1504K Aug 30 11:20:19 volumio-se kernel: Run /init as init process Aug 30 11:20:19 volumio-se kernel: with arguments: Aug 30 11:20:19 volumio-se kernel: /init Aug 30 11:20:19 volumio-se kernel: splash Aug 30 11:20:19 volumio-se kernel: with environment: Aug 30 11:20:19 volumio-se kernel: HOME=/ Aug 30 11:20:19 volumio-se kernel: TERM=linux Aug 30 11:20:19 volumio-se kernel: BOOT_IMAGE=/vmlinuz Aug 30 11:20:19 volumio-se kernel: biosdevname=0 Aug 30 11:20:19 volumio-se kernel: imgpart=UUID=f730755b-3881-4204-852d-dfd4e1b8f9ca Aug 30 11:20:19 volumio-se kernel: bootpart=UUID=EC94-4E40 Aug 30 11:20:19 volumio-se kernel: datapart=UUID=224731fe-5fbb-4682-9f5d-38fa57114a4a Aug 30 11:20:19 volumio-se kernel: hwdevice=x86 Aug 30 11:20:19 volumio-se kernel: uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg Aug 30 11:20:19 volumio-se kernel: imgfile=/volumio_current.sqsh Aug 30 11:20:19 volumio-se kernel: use_kmsg=no Aug 30 11:20:19 volumio-se kernel: usb 3-1.2: new high-speed USB device number 4 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 1-4: new high-speed USB device number 4 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) Aug 30 11:20:19 volumio-se kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/LNXVIDEO:01/input/input4 Aug 30 11:20:19 volumio-se kernel: tsc: Refined TSC clocksource calibration: 2096.055 MHz Aug 30 11:20:19 volumio-se kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36a1d7984, max_idle_ns: 440795265675 ns Aug 30 11:20:19 volumio-se kernel: clocksource: Switched to clocksource tsc Aug 30 11:20:19 volumio-se kernel: ACPI: bus type drm_connector registered Aug 30 11:20:19 volumio-se kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Aug 30 11:20:19 volumio-se kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection Aug 30 11:20:19 volumio-se kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 Aug 30 11:20:19 volumio-se kernel: hid: raw HID events driver (C) Jiri Kosina Aug 30 11:20:19 volumio-se kernel: nvme 0000:01:00.0: platform quirk: setting simple suspend Aug 30 11:20:19 volumio-se kernel: nvme nvme0: pci function 0000:01:00.0 Aug 30 11:20:19 volumio-se kernel: nvme nvme0: 8/0/0 default/read/poll queues Aug 30 11:20:19 volumio-se kernel: nvme0n1: p1 p2 p3 p4 p5 p6 p7 Aug 30 11:20:19 volumio-se kernel: usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60 Aug 30 11:20:19 volumio-se kernel: usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Aug 30 11:20:19 volumio-se kernel: usb 1-4: Product: USB2.0 Hub Aug 30 11:20:19 volumio-se kernel: input: ELAN2204:00 04F3:30F5 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:30F5.0001/input/input5 Aug 30 11:20:19 volumio-se kernel: input: ELAN2204:00 04F3:30F5 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:30F5.0001/input/input7 Aug 30 11:20:19 volumio-se kernel: hid-generic 0018:04F3:30F5.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN2204:00 04F3:30F5] on i2c-ELAN2204:00 Aug 30 11:20:19 volumio-se kernel: usb 3-1.2: New USB device found, idVendor=0781, idProduct=55bb, bcdDevice=60.04 Aug 30 11:20:19 volumio-se kernel: usb 3-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 Aug 30 11:20:19 volumio-se kernel: usb 3-1.2: Product: Portable SSD Aug 30 11:20:19 volumio-se kernel: usb 3-1.2: Manufacturer: SanDisk Aug 30 11:20:19 volumio-se kernel: usb 3-1.2: SerialNumber: 323332324A45343034333237 Aug 30 11:20:19 volumio-se kernel: hub 1-4:1.0: USB hub found Aug 30 11:20:19 volumio-se kernel: hub 1-4:1.0: 2 ports detected Aug 30 11:20:19 volumio-se kernel: usb 3-1.3: new full-speed USB device number 5 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 1-4.1: new full-speed USB device number 5 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 3-1.3: New USB device found, idVendor=046d, idProduct=c542, bcdDevice= 3.03 Aug 30 11:20:19 volumio-se kernel: usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Aug 30 11:20:19 volumio-se kernel: usb 3-1.3: Product: Wireless Receiver Aug 30 11:20:19 volumio-se kernel: usb 3-1.3: Manufacturer: Logitech Aug 30 11:20:19 volumio-se kernel: usb 1-4.1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 Aug 30 11:20:19 volumio-se kernel: usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 11:20:19 volumio-se kernel: usb 1-4.1: Product: Goodix Fingerprint Device Aug 30 11:20:19 volumio-se kernel: usb 1-4.1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. Aug 30 11:20:19 volumio-se kernel: usb 1-4.1: SerialNumber: 00000000001A Aug 30 11:20:19 volumio-se kernel: usb 1-4.2: new high-speed USB device number 6 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 1-4.2: New USB device found, idVendor=0408, idProduct=1040, bcdDevice= 0.03 Aug 30 11:20:19 volumio-se kernel: usb 1-4.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 Aug 30 11:20:19 volumio-se kernel: usb 1-4.2: Product: ov9734_techfront_camera Aug 30 11:20:19 volumio-se kernel: usb 1-4.2: Manufacturer: Quanta Aug 30 11:20:19 volumio-se kernel: usb 1-4.2: SerialNumber: 0001 Aug 30 11:20:19 volumio-se kernel: usb-storage 1-2:1.0: USB Mass Storage device detected Aug 30 11:20:19 volumio-se kernel: scsi host0: usb-storage 1-2:1.0 Aug 30 11:20:19 volumio-se kernel: usbcore: registered new interface driver usb-storage Aug 30 11:20:19 volumio-se kernel: [drm] amdgpu kernel modesetting enabled. Aug 30 11:20:19 volumio-se kernel: input: Shanling Shanling UA3 System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.2/0003:20B1:302B.0002/input/input8 Aug 30 11:20:19 volumio-se kernel: scsi host1: uas Aug 30 11:20:19 volumio-se kernel: usbcore: registered new interface driver uas Aug 30 11:20:19 volumio-se kernel: [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x19E5:0x3E18 0xC2). Aug 30 11:20:19 volumio-se kernel: [drm] register mmio base: 0xC0500000 Aug 30 11:20:19 volumio-se kernel: [drm] register mmio size: 524288 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 0 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 1 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 2 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 3 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 4 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 5 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 6 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 7 Aug 30 11:20:19 volumio-se kernel: [drm] add ip block number 8 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT Aug 30 11:20:19 volumio-se kernel: amdgpu: ATOM BIOS: 113-PICASSO-115 Aug 30 11:20:19 volumio-se kernel: [drm] VCN decode is enabled in VM mode Aug 30 11:20:19 volumio-se kernel: [drm] VCN encode is enabled in VM mode Aug 30 11:20:19 volumio-se kernel: [drm] JPEG decode is enabled in VM mode Aug 30 11:20:19 volumio-se kernel: Console: switching to colour dummy device 80x25 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: vgaarb: deactivate vga console Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled Aug 30 11:20:19 volumio-se kernel: [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used) Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF Aug 30 11:20:19 volumio-se kernel: [drm] Detected VRAM RAM=1024M, BAR=1024M Aug 30 11:20:19 volumio-se kernel: [drm] RAM width 128bits DDR4 Aug 30 11:20:19 volumio-se kernel: [drm] amdgpu: 1024M of VRAM memory ready Aug 30 11:20:19 volumio-se kernel: [drm] amdgpu: 3445M of GTT memory ready. Aug 30 11:20:19 volumio-se kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144 Aug 30 11:20:19 volumio-se kernel: [drm] PCIE GART of 1024M enabled. Aug 30 11:20:19 volumio-se kernel: [drm] PTB located at 0x000000F400A00000 Aug 30 11:20:19 volumio-se kernel: amdgpu: hwmgr_sw_init smu backed is smu10_smu Aug 30 11:20:19 volumio-se kernel: [drm] Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware Aug 30 11:20:19 volumio-se kernel: [drm] reserve 0x400000 from 0xf43fc00000 for PSP TMR Aug 30 11:20:19 volumio-se kernel: input: Shanling Shanling UA3 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.2/0003:20B1:302B.0002/input/input9 Aug 30 11:20:19 volumio-se kernel: hid-generic 0003:20B1:302B.0002: input,hidraw1: USB HID v1.11 Device [Shanling Shanling UA3] on usb-0000:03:00.3-3/input2 Aug 30 11:20:19 volumio-se kernel: input: Logitech Wireless Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C542.0003/input/input10 Aug 30 11:20:19 volumio-se kernel: hid-generic 0003:046D:C542.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Receiver] on usb-0000:03:00.4-1.3/input0 Aug 30 11:20:19 volumio-se kernel: usbcore: registered new interface driver usbhid Aug 30 11:20:19 volumio-se kernel: usbhid: USB HID core driver Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: values for F clock Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 667000 in kHz, 2874 in mV Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 933000 in kHz, 3224 in mV Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 1067000 in kHz, 3924 in mV Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 1200000 in kHz, 4074 in mV Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: values for DCF clock Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 300000 in kHz, 2874 in mV Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 600000 in kHz, 3224 in mV Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 626000 in kHz, 3924 in mV Aug 30 11:20:19 volumio-se kernel: [drm] DM_PPLIB: 654000 in kHz, 4074 in mV Aug 30 11:20:19 volumio-se kernel: [drm] Display Core v3.2.247 initialized on DCN 1.0 Aug 30 11:20:19 volumio-se kernel: [drm] kiq ring mec 2 pipe 1 q 0 Aug 30 11:20:19 volumio-se kernel: [drm] VCN decode and encode initialized successfully(under SPG Mode). Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: amdgpu: [drm] Skipping amdgpu DM backlight registration Aug 30 11:20:19 volumio-se kernel: [drm] Initialized amdgpu 3.54.0 20150101 for 0000:03:00.0 on minor 0 Aug 30 11:20:19 volumio-se kernel: fbcon: amdgpudrmfb (fb0) is primary device Aug 30 11:20:19 volumio-se kernel: Console: switching to colour frame buffer device 240x67 Aug 30 11:20:19 volumio-se kernel: amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device Aug 30 11:20:19 volumio-se kernel: scsi 1:0:0:0: Direct-Access SanDisk Portable SSD 6004 PQ: 0 ANSI: 6 Aug 30 11:20:19 volumio-se kernel: sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) Aug 30 11:20:19 volumio-se kernel: sd 1:0:0:0: [sda] Write Protect is off Aug 30 11:20:19 volumio-se kernel: sd 1:0:0:0: [sda] Mode Sense: 37 00 10 00 Aug 30 11:20:19 volumio-se kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA Aug 30 11:20:19 volumio-se kernel: sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes Aug 30 11:20:19 volumio-se kernel: sd 1:0:0:0: [sda] Optimal transfer size 1048576 bytes Aug 30 11:20:19 volumio-se kernel: sda: sda1 Aug 30 11:20:19 volumio-se kernel: sd 1:0:0:0: [sda] Attached SCSI disk Aug 30 11:20:19 volumio-se kernel: usbcore: registered new interface driver usbmouse Aug 30 11:20:19 volumio-se kernel: scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2 Aug 30 11:20:19 volumio-se kernel: sd 0:0:0:0: [sdb] 15679488 512-byte logical blocks: (8.03 GB/7.48 GiB) Aug 30 11:20:19 volumio-se kernel: sd 0:0:0:0: [sdb] Write Protect is off Aug 30 11:20:19 volumio-se kernel: sd 0:0:0:0: [sdb] Mode Sense: 03 00 00 00 Aug 30 11:20:19 volumio-se kernel: sd 0:0:0:0: [sdb] No Caching mode page found Aug 30 11:20:19 volumio-se kernel: sd 0:0:0:0: [sdb] Assuming drive cache: write through Aug 30 11:20:19 volumio-se kernel: sdb: sdb1 sdb2 sdb3 Aug 30 11:20:19 volumio-se kernel: sd 0:0:0:0: [sdb] Attached SCSI removable disk Aug 30 11:20:19 volumio-se kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Aug 30 11:20:19 volumio-se kernel: sdhci: Secure Digital Host Controller Interface driver Aug 30 11:20:19 volumio-se kernel: sdhci: Copyright(c) Pierre Ossman Aug 30 11:20:19 volumio-se kernel: fuse: init (API version 7.39) Aug 30 11:20:19 volumio-se kernel: [drm] radeon kernel modesetting enabled. Aug 30 11:20:19 volumio-se kernel: genirq: Flags mismatch irq 14. 00000001 (platform[pata_legacy.0]) vs. 00040081 (AMDI0010:00) Aug 30 11:20:19 volumio-se kernel: scsi host2: pata_legacy Aug 30 11:20:19 volumio-se kernel: ata1: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 Aug 30 11:20:19 volumio-se kernel: FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Aug 30 11:20:19 volumio-se kernel: FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Aug 30 11:20:19 volumio-se kernel: EXT4-fs (sdb2): recovery complete Aug 30 11:20:19 volumio-se kernel: EXT4-fs (sdb2): mounted filesystem f730755b-3881-4204-852d-dfd4e1b8f9ca r/w with ordered data mode. Quota mode: none. Aug 30 11:20:19 volumio-se kernel: FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Aug 30 11:20:19 volumio-se kernel: FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Aug 30 11:20:19 volumio-se kernel: loop: module loaded Aug 30 11:20:19 volumio-se kernel: block device autoloading is deprecated and will be removed. Aug 30 11:20:19 volumio-se kernel: loop0: detected capacity change from 0 to 1735440 Aug 30 11:20:19 volumio-se kernel: usb 1-3: USB disconnect, device number 3 Aug 30 11:20:19 volumio-se kernel: usb 1-3: new high-speed USB device number 7 using xhci_hcd Aug 30 11:20:19 volumio-se kernel: usb 1-3: device descriptor read/64, error -71 Aug 30 11:20:19 volumio-se kernel: usb 1-3: New USB device found, idVendor=20b1, idProduct=302b, bcdDevice= 2.01 Aug 30 11:20:19 volumio-se kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 30 11:20:19 volumio-se kernel: usb 1-3: Product: Shanling UA3 Aug 30 11:20:19 volumio-se kernel: usb 1-3: Manufacturer: Shanling Aug 30 11:20:19 volumio-se kernel: usb 1-3: SerialNumber: Shanling UA3 Aug 30 11:20:19 volumio-se kernel: input: Shanling Shanling UA3 System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.2/0003:20B1:302B.0004/input/input11 Aug 30 11:20:19 volumio-se kernel: input: Shanling Shanling UA3 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.2/0003:20B1:302B.0004/input/input12 Aug 30 11:20:19 volumio-se kernel: hid-generic 0003:20B1:302B.0004: input,hidraw1: USB HID v1.11 Device [Shanling Shanling UA3] on usb-0000:03:00.3-3/input2 Aug 30 11:20:19 volumio-se kernel: EXT4-fs (sdb3): warning: mounting fs with errors, running e2fsck is recommended Aug 30 11:20:19 volumio-se kernel: EXT4-fs (sdb3): Errors on filesystem, clearing orphan list. Aug 30 11:20:19 volumio-se kernel: EXT4-fs (sdb3): recovery complete Aug 30 11:20:19 volumio-se kernel: EXT4-fs (sdb3): mounted filesystem 224731fe-5fbb-4682-9f5d-38fa57114a4a r/w with ordered data mode. Quota mode: none. Aug 30 11:20:19 volumio-se kernel: ext4 filesystem being mounted at /mnt/ext supports timestamps until 2038-01-19 (0x7fffffff) Aug 30 11:20:19 volumio-se systemd[1]: Inserted module 'autofs4' Aug 30 11:20:19 volumio-se systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) Aug 30 11:20:19 volumio-se systemd[1]: Detected architecture x86-64. Aug 30 11:20:19 volumio-se systemd[1]: Set hostname to . Aug 30 11:20:19 volumio-se systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. Aug 30 11:20:19 volumio-se systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) Aug 30 11:20:19 volumio-se systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly. Aug 30 11:20:19 volumio-se systemd[1]: Listening on udev Control Socket. Aug 30 11:20:19 volumio-se systemd[1]: Listening on initctl Compatibility Named Pipe. Aug 30 11:20:19 volumio-se systemd[1]: Listening on fsck to fsckd communication Socket. Aug 30 11:20:19 volumio-se systemd[1]: Listening on udev Kernel Socket. Aug 30 11:20:19 volumio-se systemd-journald[532]: Journal started Aug 30 11:20:19 volumio-se systemd-journald[532]: Runtime journal (/run/log/journal/58837d5e3aabd547aa17a4c568484ea6) is 3.7M, max 30.0M, 26.2M free. Aug 30 11:20:19 volumio-se fake-hwclock[528]: Current system time: 2025-08-30 09:20:19 Aug 30 11:20:19 volumio-se fake-hwclock[528]: fake-hwclock saved clock information is in the past: 2025-07-04 09:25:57 Aug 30 11:20:19 volumio-se fake-hwclock[528]: To set system time to this saved clock anyway, use "force" Aug 30 11:20:19 volumio-se systemd[1]: Started udev Coldplug all Devices. Aug 30 11:20:19 volumio-se systemd[1]: Starting Helper to synchronize boot up for ifupdown... Aug 30 11:20:19 volumio-se systemd[1]: Started Load/Save Random Seed. Aug 30 11:20:19 volumio-se systemd[1]: Mounted RPC Pipe File System. Aug 30 11:20:19 volumio-se kernel: RPC: Registered named UNIX socket transport module. Aug 30 11:20:19 volumio-se kernel: RPC: Registered udp transport module. Aug 30 11:20:19 volumio-se kernel: RPC: Registered tcp transport module. Aug 30 11:20:19 volumio-se kernel: RPC: Registered tcp-with-tls transport module. Aug 30 11:20:19 volumio-se kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. Aug 30 11:20:19 volumio-se systemd[1]: Started Create System Users. Aug 30 11:20:19 volumio-se systemd[1]: dynamicswap.service: Succeeded. Aug 30 11:20:19 volumio-se systemd[1]: Starting Create Static Device Nodes in /dev... Aug 30 11:20:19 volumio-se systemd[1]: Started Create Static Device Nodes in /dev. Aug 30 11:20:19 volumio-se systemd[1]: Starting udev Kernel Device Manager... Aug 30 11:20:19 volumio-se systemd[1]: Reached target Local File Systems (Pre). Aug 30 11:20:19 volumio-se systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. Aug 30 11:20:19 volumio-se systemd[1]: Mounting /var/log... Aug 30 11:20:19 volumio-se systemd[1]: Mounting /var/spool/cups... Aug 30 11:20:19 volumio-se systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. Aug 30 11:20:19 volumio-se systemd[1]: Mounting /tmp... Aug 30 11:20:19 volumio-se systemd[1]: Mounted /var/log. Aug 30 11:20:19 volumio-se systemd[1]: Mounted /var/spool/cups. Aug 30 11:20:19 volumio-se systemd[1]: Mounted /tmp. Aug 30 11:20:19 volumio-se systemd[1]: Mounting /var/spool/cups/tmp... Aug 30 11:20:19 volumio-se systemd[1]: Starting Flush Journal to Persistent Storage... Aug 30 11:20:19 volumio-se systemd[1]: Mounted /var/spool/cups/tmp. Aug 30 11:20:19 volumio-se systemd-udevd[558]: Network interface NamePolicy= disabled on kernel command line, ignoring. Aug 30 11:20:19 volumio-se systemd-journald[532]: Runtime journal (/run/log/journal/58837d5e3aabd547aa17a4c568484ea6) is 3.7M, max 30.0M, 26.2M free. Aug 30 11:20:19 volumio-se systemd[1]: Started Flush Journal to Persistent Storage. Aug 30 11:20:19 volumio-se systemd[1]: Started udev Kernel Device Manager. Aug 30 11:20:19 volumio-se systemd[1]: Starting Show Plymouth Boot Screen... Aug 30 11:20:19 volumio-se systemd[1]: plymouth-start.service: Succeeded. Aug 30 11:20:19 volumio-se systemd[1]: Started Show Plymouth Boot Screen. Aug 30 11:20:19 volumio-se systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Aug 30 11:20:19 volumio-se systemd[1]: Reached target Local Encrypted Volumes. Aug 30 11:20:19 volumio-se systemd[1]: Reached target Paths. Aug 30 11:20:19 volumio-se systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. Aug 30 11:20:20 volumio-se systemd-udevd[564]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Aug 30 11:20:20 volumio-se kernel: pstore: Using crash dump compression: deflate Aug 30 11:20:20 volumio-se kernel: pstore: Registered efi_pstore as persistent store backend Aug 30 11:20:20 volumio-se kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0 Aug 30 11:20:20 volumio-se kernel: sd 0:0:0:0: Attached scsi generic sg1 type 0 Aug 30 11:20:20 volumio-se kernel: cryptd: max_cpu_qlen set to 1000 Aug 30 11:20:20 volumio-se kernel: input: Huawei WMI hotkeys as /devices/platform/huawei-wmi/input/input13 Aug 30 11:20:20 volumio-se kernel: ACPI: battery: new extension: Huawei Battery Extension Aug 30 11:20:20 volumio-se kernel: input: ELAN2204:00 04F3:30F5 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:30F5.0001/input/input14 Aug 30 11:20:20 volumio-se kernel: input: ELAN2204:00 04F3:30F5 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:30F5.0001/input/input16 Aug 30 11:20:20 volumio-se kernel: hid-multitouch 0018:04F3:30F5.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN2204:00 04F3:30F5] on i2c-ELAN2204:00 Aug 30 11:20:20 volumio-se systemd-udevd[591]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[603]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: AVX2 version of gcm_enc/dec engaged. Aug 30 11:20:20 volumio-se kernel: AES CTR mode by8 optimization enabled Aug 30 11:20:20 volumio-se systemd-udevd[595]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[603]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Aug 30 11:20:20 volumio-se kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Aug 30 11:20:20 volumio-se kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' Aug 30 11:20:20 volumio-se systemd-udevd[591]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client Aug 30 11:20:20 volumio-se kernel: snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops dc_fixpt_from_fraction.cold [amdgpu]) Aug 30 11:20:20 volumio-se systemd-udevd[591]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input17 Aug 30 11:20:20 volumio-se kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker Aug 30 11:20:20 volumio-se kernel: snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) Aug 30 11:20:20 volumio-se kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) Aug 30 11:20:20 volumio-se kernel: snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 Aug 30 11:20:20 volumio-se kernel: snd_hda_codec_realtek hdaudioC1D0: inputs: Aug 30 11:20:20 volumio-se kernel: snd_hda_codec_realtek hdaudioC1D0: Mic=0x12 Aug 30 11:20:20 volumio-se systemd-udevd[590]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input18 Aug 30 11:20:20 volumio-se kernel: usb 1-3: 1:4 : unsupported format bits 0x100000000 Aug 30 11:20:20 volumio-se systemd-udevd[568]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[567]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[577]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[609]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[616]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[617]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[603]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[619]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[570]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[607]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: usbcore: registered new interface driver snd-usb-audio Aug 30 11:20:20 volumio-se kernel: kvm_amd: TSC scaling supported Aug 30 11:20:20 volumio-se kernel: kvm_amd: Nested Virtualization enabled Aug 30 11:20:20 volumio-se kernel: kvm_amd: Nested Paging enabled Aug 30 11:20:20 volumio-se kernel: kvm_amd: Virtual VMLOAD VMSAVE supported Aug 30 11:20:20 volumio-se kernel: kvm_amd: Virtual GIF supported Aug 30 11:20:20 volumio-se kernel: kvm_amd: LBR virtualization supported Aug 30 11:20:20 volumio-se kernel: rtw_8822ce 0000:02:00.0: WOW Firmware version 9.9.4, H2C version 15 Aug 30 11:20:20 volumio-se systemd-udevd[595]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: rtw_8822ce 0000:02:00.0: Firmware version 9.9.15, H2C version 15 Aug 30 11:20:20 volumio-se kernel: Bluetooth: Core ver 2.22 Aug 30 11:20:20 volumio-se kernel: NET: Registered PF_BLUETOOTH protocol family Aug 30 11:20:20 volumio-se kernel: Bluetooth: HCI device and connection manager initialized Aug 30 11:20:20 volumio-se kernel: Bluetooth: HCI socket layer initialized Aug 30 11:20:20 volumio-se kernel: Bluetooth: L2CAP socket layer initialized Aug 30 11:20:20 volumio-se kernel: Bluetooth: SCO socket layer initialized Aug 30 11:20:20 volumio-se systemd-udevd[607]: Using default interface naming scheme 'v240'. Aug 30 11:20:20 volumio-se systemd-udevd[590]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se systemd-udevd[607]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Aug 30 11:20:20 volumio-se systemd-udevd[594]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 30 11:20:20 volumio-se kernel: usbcore: registered new interface driver btusb Aug 30 11:20:20 volumio-se kernel: Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 Aug 30 11:20:20 volumio-se kernel: Bluetooth: hci0: RTL: rom_version status=0 version=3 Aug 30 11:20:20 volumio-se kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin Aug 30 11:20:20 volumio-se systemd-udevd[595]: Process '/lib/crda/setregdomain' failed with exit code 127. Aug 30 11:20:21 volumio-se kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin Aug 30 11:20:21 volumio-se kernel: Bluetooth: hci0: RTL: cfg_sz 6, total sz 35990 Aug 30 11:20:21 volumio-se kernel: alsactl[787]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set Aug 30 11:20:21 volumio-se kernel: Bluetooth: hci0: RTL: fw version 0x0cc6d2e3 Aug 30 11:20:21 volumio-se systemd-udevd[609]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Aug 30 11:20:21 volumio-se kernel: EXT4-fs error (device sdb3): ext4_validate_block_bitmap:421: comm ext4lazyinit: bg 82: bad block bitmap checksum Aug 30 11:20:21 volumio-se systemd[1]: Started Helper to synchronize boot up for ifupdown. Aug 30 11:20:21 volumio-se systemd[1]: Found device Transcend_8GB boot. Aug 30 11:20:21 volumio-se systemd[1]: Condition check resulted in /sys/subsystem/net/devices/wlan0 being skipped. Aug 30 11:20:21 volumio-se systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Aug 30 11:20:21 volumio-se systemd[1]: Starting Show Plymouth Boot Screen... Aug 30 11:20:21 volumio-se systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Aug 30 11:20:21 volumio-se systemd[1]: Starting File System Check on /dev/disk/by-uuid/EC94-4E40... Aug 30 11:20:21 volumio-se systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Aug 30 11:20:21 volumio-se systemd[1]: Starting Load/Save RF Kill Switch Status... Aug 30 11:20:22 volumio-se systemd[1]: Started File System Check Daemon to report status. Aug 30 11:20:22 volumio-se systemd[1]: plymouth-start.service: Succeeded. Aug 30 11:20:22 volumio-se systemd[1]: Started Show Plymouth Boot Screen. Aug 30 11:20:22 volumio-se systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Aug 30 11:20:22 volumio-se systemd[1]: Started Load/Save RF Kill Switch Status. Aug 30 11:20:22 volumio-se systemd-fsck[801]: fsck.fat 4.1 (2017-01-24) Aug 30 11:20:22 volumio-se systemd-fsck[801]: 0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt. Aug 30 11:20:22 volumio-se systemd-fsck[801]: Automatically removing dirty bit. Aug 30 11:20:22 volumio-se systemd-fsck[801]: There are differences between boot sector and its backup. Aug 30 11:20:22 volumio-se systemd-fsck[801]: This is mostly harmless. Differences: (offset:original/backup) Aug 30 11:20:22 volumio-se systemd-fsck[801]: 3:53/6d, 4:59/6b, 5:53/66, 6:4c/73, 7:49/2e, 8:4e/66, 9:55/61, 10:58/74 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 90:fa/0e, 91:fc/1f, 92:31/be, 93:c9/77, 94:8e/7c, 95:d1/ac, 96:bc/22 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 97:76/c0, 98:7b/74, 99:52/0b, 100:06/56, 101:57/b4, 102:1e/0e, 103:56/bb Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 104:8e/07, 105:c1/00, 106:b1/cd, 107:26/10, 108:bf/5e, 109:78/eb Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 110:7b/f0, 111:f3/32, 112:a5/e4, 113:8e/cd, 114:d9/16, 115:bb/cd Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 116:78/19, 117:00/eb, 118:0f/fe, 119:b4/54, 120:37/68, 121:0f/69 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 122:a0/73, 123:56/20, 124:20/69, 125:d2/73, 126:78/20, 127:1b/6e Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 128:31/6f, 129:c0/74, 130:b1/20, 131:06/61, 132:89/20, 133:3f/62 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 134:89/6f, 135:47/6f, 136:02/74, 137:f3/61, 138:64/62, 139:a5/6c Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 140:8a/65, 141:0e/20, 142:18/64, 143:7c/69, 144:88/73, 145:4d/6b Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 146:f8/2e, 147:50/20, 148:50/20, 150:50/6c, 151:cd/65, 152:13/61 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 153:eb/73, 154:62/65, 155:8b/20, 156:55/69, 157:aa/6e, 158:8b/73 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 159:75/65, 160:a8/72, 161:c1/74, 162:ee/20, 163:04/61, 164:01/20 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 165:f2/62, 166:83/6f, 167:fa/6f, 168:4f/74, 169:76/61, 170:31/62 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 171:81/6c, 172:fa/65, 173:b2/20, 174:07/66, 175:73/6c, 176:2b/6f Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 177:f6/70, 178:45/70, 179:b4/79, 180:7f/20, 181:75/61, 182:25/6e Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 183:38/64, 184:4d/0d, 185:b8/0a, 186:74/70, 187:20/72, 188:66/65 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 189:3d/73, 190:21/73, 191:47/20, 192:50/61, 193:54/6e, 194:75/79 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 195:10/20, 196:80/6b, 197:7d/65, 198:b8/79, 199:ed/20, 200:75/74 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 201:0a/6f, 202:66/20, 203:ff/74, 204:75/72, 205:ec/79, 206:66/20 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 207:ff/61, 208:75/67, 209:e8/61, 210:eb/69, 211:0f/6e, 212:51/20 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 213:51/2e, 214:66/2e, 215:ff/2e, 216:75/20, 217:bc/0d, 218:eb/0a Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 219:07/00, 220:51/00, 221:51/00, 222:66/00, 223:ff/00, 224:36/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 225:1c/00, 226:7c/00, 227:b4/00, 228:08/00, 229:e8/00, 230:e9/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 232:72/00, 233:13/00, 234:20/00, 235:e4/00, 236:75/00, 237:0f/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 238:c1/00, 239:ea/00, 240:08/00, 241:42/00, 242:89/00, 243:16/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 244:1a/00, 245:7c/00, 246:83/00, 247:e1/00, 248:3f/00, 249:89/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 250:0e/00, 251:18/00, 252:7c/00, 253:fb/00, 254:bb/00, 255:aa/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 256:55/00, 257:b4/00, 258:41/00, 259:e8/00, 260:cb/00, 262:72/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 263:10/00, 264:81/00, 265:fb/00, 266:55/00, 267:aa/00, 268:75/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 269:0a/00, 270:f6/00, 271:c1/00, 272:01/00, 273:74/00, 274:05/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 275:c6/00, 276:06/00, 277:46/00, 278:7d/00, 280:66/00, 281:b8/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 282:c6/00, 283:9b/00, 286:66/00, 287:ba/00, 292:bb/00, 294:80/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 295:e8/00, 296:0e/00, 298:66/00, 299:81/00, 300:3e/00, 301:1c/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 302:80/00, 303:d5/00, 304:cf/00, 305:c7/00, 306:62/00, 307:75/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 308:74/00, 309:e9/00, 310:f8/00, 311:02/00, 312:66/00, 313:03/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 314:06/00, 315:60/00, 316:7b/00, 317:66/00, 318:13/00, 319:16/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 320:64/00, 321:7b/00, 322:b9/00, 323:10/00, 325:eb/00, 326:2b/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 327:66/00, 328:52/00, 329:66/00, 330:50/00, 331:06/00, 332:53/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 333:6a/00, 334:01/00, 335:6a/00, 336:10/00, 337:89/00, 338:e6/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 339:66/00, 340:60/00, 341:b4/00, 342:42/00, 343:e8/00, 344:77/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 346:66/00, 347:61/00, 348:8d/00, 349:64/00, 350:10/00, 351:72/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 352:01/00, 353:c3/00, 354:66/00, 355:60/00, 356:31/00, 357:c0/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 358:e8/00, 359:68/00, 361:66/00, 362:61/00, 363:e2/00, 364:da/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 365:c6/00, 366:06/00, 367:46/00, 368:7d/00, 369:2b/00, 370:66/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 371:60/00, 372:66/00, 373:0f/00, 374:b7/00, 375:36/00, 376:18/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 377:7c/00, 378:66/00, 379:0f/00, 380:b7/00, 381:3e/00, 382:1a/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 383:7c/00, 384:66/00, 385:f7/00, 386:f6/00, 387:31/00, 388:c9/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 389:87/00, 390:ca/00, 391:66/00, 392:f7/00, 393:f7/00, 394:66/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 395:3d/00, 396:ff/00, 397:03/00, 400:77/00, 401:17/00, 402:c0/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 403:e4/00, 404:06/00, 405:41/00, 406:08/00, 407:e1/00, 408:88/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 409:c5/00, 410:88/00, 411:d6/00, 412:b8/00, 413:01/00, 414:02/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 415:e8/00, 416:2f/00, 418:66/00, 419:61/00, 420:72/00, 421:01/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 422:c3/00, 423:e2/00, 424:c9/00, 425:31/00, 426:f6/00, 427:8e/00 Aug 30 11:20:22 volumio-se systemd-fsck[801]: , 428:d6/00, 429:bc/00, 430:68/00, 431:7b/00, 432:8e/00, 433:de/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 434:66/00, 435:8f/00, 436:06/00, 437:78/00, 439:be/00, 440:da/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 441:7d/00, 442:ac/00, 443:20/00, 444:c0/00, 445:74/00, 446:09/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 447:b4/00, 448:0e/00, 449:bb/00, 450:07/00, 452:cd/00, 453:10/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 454:eb/00, 455:f2/00, 456:31/00, 457:c0/00, 458:cd/00, 459:16/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 460:cd/00, 461:19/00, 462:f4/00, 463:eb/00, 464:fd/00, 465:8a/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 466:16/00, 467:74/00, 468:7b/00, 469:06/00, 470:cd/00, 471:13/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 472:07/00, 473:c3/00, 474:42/00, 475:6f/00, 476:6f/00, 477:74/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 478:20/00, 479:65/00, 480:72/00, 481:72/00, 482:6f/00, 483:72/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 484:0d/00, 485:0a/00, 504:fe/00, 505:02/00, 506:b2/00, 507:3e/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: , 508:18/00, 509:37/00 Aug 30 11:20:25 volumio-se systemd-fsck[801]: Not automatically fixing this. Aug 30 11:20:25 volumio-se systemd-fsck[801]: Performing changes. Aug 30 11:20:25 volumio-se systemd-fsck[801]: /dev/sdb1: 18 files, 159617/344788 clusters Aug 30 11:20:25 volumio-se systemd[1]: Started File System Check on /dev/disk/by-uuid/EC94-4E40. Aug 30 11:20:25 volumio-se systemd[1]: Mounting /boot... Aug 30 11:20:25 volumio-se kernel: FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Aug 30 11:20:27 volumio-se systemd[1]: systemd-rfkill.service: Succeeded. Aug 30 11:20:27 volumio-se systemd[1]: Mounted /boot. Aug 30 11:20:27 volumio-se systemd[1]: Reached target Local File Systems. Aug 30 11:20:27 volumio-se systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. Aug 30 11:20:27 volumio-se systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... Aug 30 11:20:27 volumio-se systemd[1]: Starting Raise network interfaces... Aug 30 11:20:27 volumio-se systemd[1]: Starting Create Volatile Files and Directories... Aug 30 11:20:27 volumio-se systemd[1]: Started ifup for wlan0. Aug 30 11:20:27 volumio-se systemd[1]: Starting Preprocess NFS configuration... Aug 30 11:20:27 volumio-se systemd[1]: Received SIGRTMIN+20 from PID 402 (plymouthd). Aug 30 11:20:27 volumio-se systemd[1]: plymouth-read-write.service: Succeeded. Aug 30 11:20:27 volumio-se systemd[1]: Started Tell Plymouth To Write Out Runtime Data. Aug 30 11:20:27 volumio-se systemd[1]: nfs-config.service: Succeeded. Aug 30 11:20:27 volumio-se systemd[1]: Started Preprocess NFS configuration. Aug 30 11:20:27 volumio-se systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. Aug 30 11:20:27 volumio-se systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped. Aug 30 11:20:27 volumio-se systemd[1]: Reached target NFS client services. Aug 30 11:20:27 volumio-se systemd[1]: Started Create Volatile Files and Directories. Aug 30 11:20:27 volumio-se kernel: warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 Aug 30 11:20:27 volumio-se systemd[1]: Starting Update UTMP about System Boot/Shutdown... Aug 30 11:20:27 volumio-se systemd[1]: Starting RPC bind portmap service... Aug 30 11:20:27 volumio-se systemd[1]: Condition check resulted in Network Time Synchronization being skipped. Aug 30 11:20:27 volumio-se systemd[1]: Started Entropy daemon using the HAVEGE algorithm. Aug 30 11:20:27 volumio-se ifup[811]: ifup: waiting for lock on /run/network/ifstate.wlan0 Aug 30 11:20:27 volumio-se systemd[1]: Started Update UTMP about System Boot/Shutdown. Aug 30 11:20:27 volumio-se systemd[1]: Reached target System Initialization. Aug 30 11:20:27 volumio-se systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket. Aug 30 11:20:27 volumio-se systemd[1]: Started Daily Cleanup of Temporary Directories. Aug 30 11:20:27 volumio-se systemd[1]: Listening on D-Bus System Message Bus Socket. Aug 30 11:20:27 volumio-se systemd[1]: man-db.timer: Not using persistent file timestamp Sat 2025-08-30 14:13:17 +02 as it is in the future. Aug 30 11:20:27 volumio-se systemd[1]: Started Daily man-db regeneration. Aug 30 11:20:27 volumio-se systemd[1]: Listening on triggerhappy.socket. Aug 30 11:20:27 volumio-se systemd[1]: Reached target Sockets. Aug 30 11:20:27 volumio-se systemd[1]: apt-daily.timer: Not using persistent file timestamp Sat 2025-08-30 14:13:17 +02 as it is in the future. Aug 30 11:20:27 volumio-se systemd[1]: Started Daily apt download activities. Aug 30 11:20:27 volumio-se systemd[1]: Reached target Basic System. Aug 30 11:20:27 volumio-se systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped. Aug 30 11:20:27 volumio-se systemd[1]: Condition check resulted in Copy user wpa_supplicant.conf being skipped. Aug 30 11:20:27 volumio-se systemd[1]: Started MPD Monitor Service. Aug 30 11:20:27 volumio-se systemd[1]: Starting Volumio Time Update Utility... Aug 30 11:20:27 volumio-se systemd[1]: Starting Bluetooth service... Aug 30 11:20:27 volumio-se systemd[1]: Condition check resulted in Volumio SSH enabler being skipped. Aug 30 11:20:27 volumio-se systemd[1]: Started Volumio Log Rotation Service. Aug 30 11:20:27 volumio-se mpd_monitor.sh[871]: MPD Monitor Service: Starting MPD Monitor Service Aug 30 11:20:27 volumio-se systemd[1]: Started D-Bus System Message Bus. Aug 30 11:20:27 volumio-se volumio-time-update[872]: volumio-time-update-util: Fetching time from Volumio... Aug 30 11:20:27 volumio-se systemd[1]: Starting Wireless Services... Aug 30 11:20:27 volumio-se systemd[1]: Starting DHCP Client Daemon... Aug 30 11:20:27 volumio-se systemd[1]: Started Volumio Iptables Module. Aug 30 11:20:27 volumio-se systemd[1]: Starting Login Service... Aug 30 11:20:27 volumio-se systemd[1]: Starting WPA supplicant... Aug 30 11:20:27 volumio-se systemd[1]: Starting Avahi mDNS/DNS-SD Stack... Aug 30 11:20:27 volumio-se systemd[1]: Started Manage Sound Card State (restore and store). Aug 30 11:20:27 volumio-se systemd[1]: Starting Save/Restore Sound Card State... Aug 30 11:20:27 volumio-se alsactl[888]: alsactl 1.1.8 daemon started Aug 30 11:20:27 volumio-se systemd[1]: Started UPnP Renderer front-end to MPD. Aug 30 11:20:27 volumio-se systemd[1]: apt-daily-upgrade.timer: Not using persistent file timestamp Sat 2025-08-30 14:13:17 +02 as it is in the future. Aug 30 11:20:27 volumio-se systemd[1]: Started Daily apt upgrade and clean activities. Aug 30 11:20:27 volumio-se systemd[1]: Reached target Timers. Aug 30 11:20:27 volumio-se systemd[1]: Starting triggerhappy global hotkey daemon... Aug 30 11:20:27 volumio-se systemd[1]: Started volumio-remote-updater.service. Aug 30 11:20:27 volumio-se thd[891]: Unable to parse trigger line: Aug 30 11:20:27 volumio-se thd[891]: Unable to parse trigger line: KEY_MIN_INTERESTING 1 /usr/local/bin/volumio volume toggle Aug 30 11:20:27 volumio-se thd[891]: Unable to parse trigger line: Aug 30 11:20:27 volumio-se thd[891]: Found socket passed from systemd Aug 30 11:20:27 volumio-se systemd-logind[885]: New seat seat0. Aug 30 11:20:27 volumio-se systemd-logind[885]: Watching system buttons on /dev/input/event2 (Power Button) Aug 30 11:20:27 volumio-se systemd-logind[885]: Watching system buttons on /dev/input/event0 (Power Button) Aug 30 11:20:27 volumio-se systemd-logind[885]: Watching system buttons on /dev/input/event1 (Lid Switch) Aug 30 11:20:27 volumio-se mpd_monitor.sh[871]: MPD error: Connection refused Aug 30 11:20:27 volumio-se mpd_monitor.sh[871]: MPD Monitor Service: MPD Appears to be inactive, restarting Aug 30 11:20:27 volumio-se systemd-logind[885]: Watching system buttons on /dev/input/event3 (AT Translated Set 2 keyboard) Aug 30 11:20:27 volumio-se mpd_monitor.sh[871]: mpd: no process found Aug 30 11:20:28 volumio-se avahi-daemon[887]: Found user 'avahi' (UID 111) and group 'avahi' (GID 113). Aug 30 11:20:28 volumio-se avahi-daemon[887]: Successfully dropped root privileges. Aug 30 11:20:28 volumio-se avahi-daemon[887]: avahi-daemon 0.7 starting up. Aug 30 11:20:28 volumio-se volumio-remote-updater[892]: Error: No active session Aug 30 11:20:28 volumio-se volumio-time-update[872]: volumio-time-update-util: Date not found in response Aug 30 11:20:28 volumio-se volumio-time-update[872]: volumio-time-update-util: Retrying in 5 seconds... Aug 30 11:20:28 volumio-se bluetoothd[873]: Bluetooth daemon 5.50 Aug 30 11:20:28 volumio-se bluetoothd[873]: Unknown key AutoConnectTimeout for group General in /etc/bluetooth/main.conf Aug 30 11:20:28 volumio-se systemd[1]: Started triggerhappy global hotkey daemon. Aug 30 11:20:28 volumio-se systemd[1]: Started Save/Restore Sound Card State. Aug 30 11:20:28 volumio-se wpa_supplicant[886]: Successfully initialized wpa_supplicant Aug 30 11:20:28 volumio-se avahi-daemon[887]: Successfully called chroot(). Aug 30 11:20:28 volumio-se avahi-daemon[887]: Successfully dropped remaining capabilities. Aug 30 11:20:28 volumio-se systemd[1]: Started Login Service. Aug 30 11:20:28 volumio-se systemd[1]: Started Bluetooth service. Aug 30 11:20:28 volumio-se systemd[1]: Started WPA supplicant. Aug 30 11:20:28 volumio-se systemd[1]: Started Avahi mDNS/DNS-SD Stack. Aug 30 11:20:28 volumio-se systemd[1]: Reached target Bluetooth. Aug 30 11:20:28 volumio-se bluetoothd[873]: Starting SDP server Aug 30 11:20:28 volumio-se bluetoothd[873]: Excluding (cli) sap Aug 30 11:20:28 volumio-se systemd[1]: Listening on mpd.socket. Aug 30 11:20:28 volumio-se systemd[1]: Reached target Sound Card. Aug 30 11:20:28 volumio-se avahi-daemon[887]: Loading service file /services/volumio.service. Aug 30 11:20:28 volumio-se avahi-daemon[887]: Network interface enumeration completed. Aug 30 11:20:28 volumio-se systemd[1]: Started RPC bind portmap service. Aug 30 11:20:28 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:28] [info] asio async_connect error: system:111 (Connection refused) Aug 30 11:20:28 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:28] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Aug 30 11:20:28 volumio-se systemd[1]: Reached target RPC Port Mapper. Aug 30 11:20:28 volumio-se systemd[1]: Reached target Remote File Systems (Pre). Aug 30 11:20:28 volumio-se systemd[1]: Reached target Remote File Systems. Aug 30 11:20:28 volumio-se avahi-daemon[887]: Server startup complete. Host name is volumio-se.local. Local service cookie is 3241752956. Aug 30 11:20:28 volumio-se avahi-daemon[887]: Service "Volumio se" (/services/volumio.service) successfully established. Aug 30 11:20:28 volumio-se bluetoothd[873]: Bluetooth management interface 1.22 initialized Aug 30 11:20:28 volumio-se dbus-daemon[876]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.2' (uid=0 pid=873 comm="/usr/lib/bluetooth/bluetoothd --noplugin=sap ") Aug 30 11:20:28 volumio-se kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Aug 30 11:20:28 volumio-se kernel: Bluetooth: BNEP filters: protocol multicast Aug 30 11:20:28 volumio-se kernel: Bluetooth: BNEP socket layer initialized Aug 30 11:20:28 volumio-se kernel: Bluetooth: MGMT ver 1.22 Aug 30 11:20:28 volumio-se systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling... Aug 30 11:20:28 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:28] [error] handle_connect error: Underlying Transport Error Aug 30 11:20:28 volumio-se volumio[890]: Could not open config: /tmp/upmpdcli.conf Aug 30 11:20:28 volumio-se kernel: 8021q: 802.1Q VLAN Support v1.8 Aug 30 11:20:28 volumio-se systemd[1]: upmpdcli.service: Main process exited, code=exited, status=1/FAILURE Aug 30 11:20:28 volumio-se systemd[1]: upmpdcli.service: Failed with result 'exit-code'. Aug 30 11:20:28 volumio-se systemd[1]: Starting Hostname Service... Aug 30 11:20:28 volumio-se sh[814]: wlan0=wlan0 Aug 30 11:20:28 volumio-se haveged[869]: haveged: ver: 1.9.1; arch: x86; vend: ; build: (gcc 8.3.0 ITV); collect: 128K Aug 30 11:20:28 volumio-se haveged[869]: haveged: cpu: (VC); data: 32K (V); inst: 64K (V); idx: 39/40; sz: 52825/52825 Aug 30 11:20:28 volumio-se haveged[869]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.00144 Aug 30 11:20:28 volumio-se haveged[869]: haveged: fills: 0, generated: 0 Aug 30 11:20:28 volumio-se dbus-daemon[876]: [system] Successfully activated service 'org.freedesktop.hostname1' Aug 30 11:20:28 volumio-se systemd[1]: Started Hostname Service. Aug 30 11:20:28 volumio-se systemd[1]: Started Raise network interfaces. Aug 30 11:20:28 volumio-se systemd[1]: Reached target Network. Aug 30 11:20:28 volumio-se systemd[1]: Starting Music Player Daemon... Aug 30 11:20:28 volumio-se systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped. Aug 30 11:20:28 volumio-se systemd[1]: Starting Permit User Sessions... Aug 30 11:20:28 volumio-se systemd[1]: Starting Network Time Service... Aug 30 11:20:28 volumio-se systemd[1]: Reached target Network is Online. Aug 30 11:20:28 volumio-se systemd[1]: Starting /etc/rc.local Compatibility... Aug 30 11:20:28 volumio-se systemd[1]: Starting Samba NMB Daemon... Aug 30 11:20:28 volumio-se systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Aug 30 11:20:28 volumio-se systemd[1]: Starting LSB: Brings up/down network automatically... Aug 30 11:20:28 volumio-se systemd[1]: Started /etc/rc.local Compatibility. Aug 30 11:20:28 volumio-se systemd[1]: iptables.service: Succeeded. Aug 30 11:20:28 volumio-se systemd[1]: Started Permit User Sessions. Aug 30 11:20:28 volumio-se systemd[1]: Starting Hold until boot process finishes up... Aug 30 11:20:28 volumio-se systemd[1]: Starting Terminate Plymouth Boot Screen... Aug 30 11:20:28 volumio-se dhcpcd[883]: no interfaces have a carrier Aug 30 11:20:28 volumio-se dhcpcd[883]: forked to background, child pid 1001 Aug 30 11:20:28 volumio-se dhcpcd[883]: no interfaces have a carrier Aug 30 11:20:28 volumio-se dhcpcd[883]: forked to background, child pid 1001 Aug 30 11:20:28 volumio-se dhcpcd[1001]: wlan0: waiting for carrier Aug 30 11:20:28 volumio-se dhcpcd[1001]: wlan0: carrier acquired Aug 30 11:20:28 volumio-se systemd[1]: Started DHCP Client Daemon. Aug 30 11:20:28 volumio-se systemd[1]: Received SIGRTMIN+21 from PID 402 (plymouthd). Aug 30 11:20:28 volumio-se dhcpcd[1001]: DUID 00:04:6c:89:9c:eb:25:5c:49:f2:84:e3:fb:77:f1:9f:d0:a2 Aug 30 11:20:28 volumio-se dhcpcd[1001]: wlan0: IAID ef:de:d8:49 Aug 30 11:20:28 volumio-se dhcpcd[1001]: wlan0: adding address fe80::5eba:efff:fede:d849 Aug 30 11:20:28 volumio-se dhcpcd[1001]: ipv6_addaddr1: Permission denied Aug 30 11:20:28 volumio-se dhcpcd[1001]: wlan0: carrier lost Aug 30 11:20:28 volumio-se systemd[1]: Received SIGRTMIN+21 from PID 402 (plymouthd). Aug 30 11:20:28 volumio-se systemd[1]: plymouth-quit-wait.service: Succeeded. Aug 30 11:20:28 volumio-se systemd[1]: Started Hold until boot process finishes up. Aug 30 11:20:28 volumio-se systemd[1]: plymouth-quit.service: Succeeded. Aug 30 11:20:28 volumio-se systemd[1]: Started Terminate Plymouth Boot Screen. Aug 30 11:20:29 volumio-se systemd[1]: Started Getty on tty1. Aug 30 11:20:29 volumio-se systemd[1]: Reached target Login Prompts. Aug 30 11:20:30 volumio-se ifplugd[991]: Network Interface Plugging Daemon...skip eth0...done. Aug 30 11:20:30 volumio-se systemd[1]: Started LSB: Brings up/down network automatically. Aug 30 11:20:30 volumio-se loadcpufreq[918]: Loading cpufreq kernel modules...done (acpi-cpufreq). Aug 30 11:20:30 volumio-se systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling. Aug 30 11:20:30 volumio-se systemd[1]: Starting LSB: set CPUFreq kernel parameters... Aug 30 11:20:30 volumio-se ntpd[986]: ntpd 4.2.8p12@1.3728-o (1): Starting Aug 30 11:20:30 volumio-se ntpd[986]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:103 Aug 30 11:20:30 volumio-se systemd[1]: Started Network Time Service. Aug 30 11:20:30 volumio-se ntpd[1053]: proto: precision = 0.151 usec (-23) Aug 30 11:20:30 volumio-se cpufrequtils[1048]: CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done. Aug 30 11:20:30 volumio-se systemd[1]: Started LSB: set CPUFreq kernel parameters. Aug 30 11:20:30 volumio-se ntpd[1053]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Aug 30 11:20:30 volumio-se ntpd[1053]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2022-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Aug 30 11:20:30 volumio-se ntpd[1053]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): expired less than 977 days ago Aug 30 11:20:30 volumio-se ntpd[1053]: Listen and drop on 0 v6wildcard [::]:123 Aug 30 11:20:30 volumio-se ntpd[1053]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Aug 30 11:20:30 volumio-se ntpd[1053]: Listen normally on 2 lo 127.0.0.1:123 Aug 30 11:20:30 volumio-se ntpd[1053]: Listening on routing socket on fd #19 for interface updates Aug 30 11:20:30 volumio-se ntpd[1053]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 30 11:20:30 volumio-se ntpd[1053]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 30 11:20:31 volumio-se sudo[978]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chown mpd:audio /var/log/mpd.log Aug 30 11:20:31 volumio-se sudo[978]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:31 volumio-se sudo[978]: /bin/chown: cannot access '/var/log/mpd.log': No such file or directory Aug 30 11:20:31 volumio-se sudo[978]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:31 volumio-se ntpd[1053]: error resolving pool 0.debian.pool.ntp.org: System error (-11) Aug 30 11:20:31 volumio-se nmbd[995]: [2025/08/30 11:20:31.954781, 0] ../source3/nmbd/asyncdns.c:158(start_async_dns) Aug 30 11:20:31 volumio-se nmbd[995]: started asyncdns process 1064 Aug 30 11:20:31 volumio-se nmbd[995]: [2025/08/30 11:20:31.955456, 0] ../lib/util/become_daemon.c:149(daemon_status) Aug 30 11:20:31 volumio-se nmbd[995]: daemon_status: STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ... Aug 30 11:20:31 volumio-se nmbd[995]: [2025/08/30 11:20:31.955494, 0] ../source3/nmbd/nmbd_subnetdb.c:254(create_subnets) Aug 30 11:20:31 volumio-se nmbd[995]: NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6). Aug 30 11:20:32 volumio-se wireless.js[882]: Cleaning previous... Aug 30 11:20:32 volumio-se sudo[1072]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Aug 30 11:20:32 volumio-se sudo[1072]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:32 volumio-se sudo[1072]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:32 volumio-se sudo[1074]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Aug 30 11:20:32 volumio-se sudo[1074]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:32 volumio-se sudo[1074]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:32 volumio-se wireless.js[882]: Stopped aP Aug 30 11:20:32 volumio-se sudo[1081]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Aug 30 11:20:32 volumio-se sudo[1081]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:32 volumio-se sudo[1081]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:32 volumio-se sudo[1083]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg get Aug 30 11:20:32 volumio-se sudo[1083]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:32 volumio-se sudo[1083]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:32 volumio-se sudo[1090]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Aug 30 11:20:32 volumio-se sudo[1090]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:32 volumio-se sudo[1090]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:32 volumio-se sudo[1092]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw wlan0 scan Aug 30 11:20:32 volumio-se sudo[1092]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:32 volumio-se ntpd[1053]: error resolving pool 1.debian.pool.ntp.org: System error (-11) Aug 30 11:20:33 volumio-se volumio-time-update[872]: volumio-time-update-util: Fetching time from Volumio... Aug 30 11:20:33 volumio-se volumio-time-update[872]: volumio-time-update-util: Date not found in response Aug 30 11:20:33 volumio-se volumio-time-update[872]: volumio-time-update-util: Retrying in 5 seconds... Aug 30 11:20:33 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:33] [info] asio async_connect error: system:111 (Connection refused) Aug 30 11:20:33 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:33] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Aug 30 11:20:33 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:33] [error] handle_connect error: Underlying Transport Error Aug 30 11:20:33 volumio-se mpd[1062]: Aug 30 11:20 : decoder: Decoder plugin 'wildmidi' is unavailable: configuration file does not exist: /etc/timidity/timidity.cfg Aug 30 11:20:33 volumio-se systemd[1]: Started Music Player Daemon. Aug 30 11:20:33 volumio-se mpd_monitor.sh[871]: MPD Monitor Service: MPD restarted due to no mpc output. Aug 30 11:20:33 volumio-se ntpd[1053]: error resolving pool 2.debian.pool.ntp.org: System error (-11) Aug 30 11:20:34 volumio-se ntpd[1053]: error resolving pool 3.debian.pool.ntp.org: System error (-11) Aug 30 11:20:36 volumio-se sudo[1092]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:36 volumio-se wireless.js[882]: SETTING APPROPRIATE REG DOMAIN: DE Aug 30 11:20:36 volumio-se sudo[1105]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Aug 30 11:20:36 volumio-se sudo[1105]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:36 volumio-se sudo[1105]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:36 volumio-se sudo[1107]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg set DE Aug 30 11:20:36 volumio-se sudo[1107]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:36 volumio-se sudo[1107]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:36 volumio-se wireless.js[882]: SUCCESSFULLY SET NEW REGDOMAIN: DE Aug 30 11:20:36 volumio-se wireless.js[882]: Start wireless flow Aug 30 11:20:36 volumio-se wireless.js[882]: Stopped hotspot (if there).. Aug 30 11:20:36 volumio-se sudo[1112]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Aug 30 11:20:36 volumio-se sudo[1112]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:36 volumio-se sudo[1112]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:36 volumio-se sudo[1114]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Aug 30 11:20:36 volumio-se sudo[1114]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:36 volumio-se sudo[1114]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:36 volumio-se wireless.js[882]: DHCP IP Aug 30 11:20:36 volumio-se wpa_supplicant[1116]: Successfully initialized wpa_supplicant Aug 30 11:20:36 volumio-se wireless.js[882]: Start ap Aug 30 11:20:36 volumio-se sudo[1117]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/dhcpcd Aug 30 11:20:36 volumio-se sudo[1117]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:36 volumio-se dhcpcd[1118]: sending commands to master dhcpcd process Aug 30 11:20:36 volumio-se dhcpcd[1001]: control command: /sbin/dhcpcd Aug 30 11:20:36 volumio-se sudo[1117]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:37 volumio-se wireless.js[882]: trying... Aug 30 11:20:37 volumio-se sudo[1120]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:37 volumio-se sudo[1120]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:37 volumio-se sudo[1120]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:38 volumio-se volumio-time-update[872]: volumio-time-update-util: Fetching time from Volumio... Aug 30 11:20:38 volumio-se volumio-time-update[872]: volumio-time-update-util: Date not found in response Aug 30 11:20:38 volumio-se volumio-time-update[872]: volumio-time-update-util: Retrying in 5 seconds... Aug 30 11:20:38 volumio-se wireless.js[882]: trying... Aug 30 11:20:38 volumio-se sudo[1129]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:38 volumio-se sudo[1129]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:38 volumio-se sudo[1129]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:39 volumio-se wireless.js[882]: trying... Aug 30 11:20:39 volumio-se sudo[1132]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:39 volumio-se sudo[1132]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:39 volumio-se sudo[1132]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:40 volumio-se wireless.js[882]: trying... Aug 30 11:20:40 volumio-se sudo[1135]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:40 volumio-se sudo[1135]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:40 volumio-se sudo[1135]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:40 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:40] [info] asio async_connect error: system:111 (Connection refused) Aug 30 11:20:40 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:40] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Aug 30 11:20:40 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:40] [error] handle_connect error: Underlying Transport Error Aug 30 11:20:41 volumio-se wpa_supplicant[1127]: wlan0: SME: Trying to authenticate with 34:60:f9:16:ea:54 (SSID='TP-Link_EA52_5G' freq=5220 MHz) Aug 30 11:20:41 volumio-se kernel: wlan0: authenticate with 34:60:f9:16:ea:54 Aug 30 11:20:41 volumio-se wireless.js[882]: trying... Aug 30 11:20:41 volumio-se sudo[1138]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:41 volumio-se sudo[1138]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:41 volumio-se sudo[1138]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:41 volumio-se kernel: wlan0: send auth to 34:60:f9:16:ea:54 (try 1/3) Aug 30 11:20:41 volumio-se wpa_supplicant[1127]: wlan0: Trying to associate with 34:60:f9:16:ea:54 (SSID='TP-Link_EA52_5G' freq=5220 MHz) Aug 30 11:20:41 volumio-se kernel: wlan0: authenticated Aug 30 11:20:41 volumio-se kernel: wlan0: associate with 34:60:f9:16:ea:54 (try 1/3) Aug 30 11:20:41 volumio-se wpa_supplicant[1127]: wlan0: Associated with 34:60:f9:16:ea:54 Aug 30 11:20:41 volumio-se wpa_supplicant[1127]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 Aug 30 11:20:41 volumio-se kernel: wlan0: RX AssocResp from 34:60:f9:16:ea:54 (capab=0x1811 status=0 aid=5) Aug 30 11:20:41 volumio-se kernel: wlan0: associated Aug 30 11:20:42 volumio-se wpa_supplicant[1127]: wlan0: WPA: Key negotiation completed with 34:60:f9:16:ea:54 [PTK=CCMP GTK=CCMP] Aug 30 11:20:42 volumio-se wpa_supplicant[1127]: wlan0: CTRL-EVENT-CONNECTED - Connection to 34:60:f9:16:ea:54 completed [id=0 id_str=] Aug 30 11:20:42 volumio-se dhcpcd[1001]: wlan0: carrier acquired Aug 30 11:20:42 volumio-se dhcpcd[1001]: wlan0: IAID ef:de:d8:49 Aug 30 11:20:42 volumio-se dhcpcd[1001]: wlan0: soliciting an IPv6 router Aug 30 11:20:42 volumio-se dhcpcd[1001]: wlan0: rebinding lease of 192.168.0.105 Aug 30 11:20:42 volumio-se wireless.js[882]: trying... Aug 30 11:20:42 volumio-se sudo[1157]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:42 volumio-se sudo[1157]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:42 volumio-se sudo[1157]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:43 volumio-se dhcpcd[1001]: wlan0: probing address 192.168.0.105/24 Aug 30 11:20:43 volumio-se volumio-time-update[872]: volumio-time-update-util: Fetching time from Volumio... Aug 30 11:20:43 volumio-se volumio-time-update[872]: volumio-time-update-util: Date not found in response Aug 30 11:20:43 volumio-se volumio-time-update[872]: volumio-time-update-util: Retrying in 5 seconds... Aug 30 11:20:43 volumio-se wireless.js[882]: trying... Aug 30 11:20:43 volumio-se sudo[1165]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:43 volumio-se sudo[1165]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:43 volumio-se sudo[1165]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:44 volumio-se wireless.js[882]: trying... Aug 30 11:20:44 volumio-se sudo[1168]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:44 volumio-se sudo[1168]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:44 volumio-se sudo[1168]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:45 volumio-se wireless.js[882]: trying... Aug 30 11:20:45 volumio-se sudo[1171]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:45 volumio-se sudo[1171]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:45 volumio-se sudo[1171]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:46 volumio-se wireless.js[882]: trying... Aug 30 11:20:46 volumio-se sudo[1174]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:46 volumio-se sudo[1174]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:46 volumio-se sudo[1174]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:47 volumio-se wireless.js[882]: trying... Aug 30 11:20:47 volumio-se sudo[1177]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:47 volumio-se sudo[1177]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:47 volumio-se sudo[1177]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:48 volumio-se dhcpcd[1001]: wlan0: leased 192.168.0.105 for 7200 seconds Aug 30 11:20:48 volumio-se avahi-daemon[887]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.105. Aug 30 11:20:48 volumio-se dhcpcd[1001]: wlan0: adding route to 192.168.0.0/24 Aug 30 11:20:48 volumio-se avahi-daemon[887]: New relevant interface wlan0.IPv4 for mDNS. Aug 30 11:20:48 volumio-se dhcpcd[1001]: wlan0: adding default route via 192.168.0.1 Aug 30 11:20:48 volumio-se avahi-daemon[887]: Registering new address record for 192.168.0.105 on wlan0.IPv4. Aug 30 11:20:48 volumio-se ntpd[1053]: ntpd exiting on signal 15 (Terminated) Aug 30 11:20:48 volumio-se systemd[1]: Stopping Network Time Service... Aug 30 11:20:48 volumio-se systemd[1]: ntp.service: Succeeded. Aug 30 11:20:48 volumio-se systemd[1]: Stopped Network Time Service. Aug 30 11:20:48 volumio-se volumio-time-update[872]: volumio-time-update-util: Fetching time from Volumio... Aug 30 11:20:48 volumio-se systemd[1]: Starting Network Time Service... Aug 30 11:20:48 volumio-se ntpd[1212]: ntpd 4.2.8p12@1.3728-o (1): Starting Aug 30 11:20:48 volumio-se ntpd[1212]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:103 Aug 30 11:20:48 volumio-se systemd[1]: Started Network Time Service. Aug 30 11:20:48 volumio-se ntpd[1222]: proto: precision = 0.060 usec (-24) Aug 30 11:20:48 volumio-se ntpd[1222]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Aug 30 11:20:48 volumio-se ntpd[1222]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2022-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Aug 30 11:20:48 volumio-se ntpd[1222]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): expired less than 977 days ago Aug 30 11:20:48 volumio-se ntpd[1222]: Listen and drop on 0 v6wildcard [::]:123 Aug 30 11:20:48 volumio-se ntpd[1222]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Aug 30 11:20:48 volumio-se ntpd[1222]: Listen normally on 2 lo 127.0.0.1:123 Aug 30 11:20:48 volumio-se ntpd[1222]: Listen normally on 3 wlan0 192.168.0.105:123 Aug 30 11:20:48 volumio-se ntpd[1222]: Listening on routing socket on fd #20 for interface updates Aug 30 11:20:48 volumio-se ntpd[1222]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 30 11:20:48 volumio-se ntpd[1222]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 30 11:20:48 volumio-se volumio-time-update[872]: volumio-time-update-util: Setting system time to: 2025-08-30 11:20:51 Aug 30 11:20:48 volumio-se sudo[1225]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/timedatectl set-time 2025-08-30 11:20:51 Aug 30 11:20:48 volumio-se sudo[1225]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:48 volumio-se dbus-daemon[876]: [system] Activating via systemd: service name='org.freedesktop.timedate1' unit='dbus-org.freedesktop.timedate1.service' requested by ':1.7' (uid=0 pid=1226 comm="timedatectl set-time 2025-08-30 11:20:51 ") Aug 30 11:20:48 volumio-se systemd[1]: Starting Time & Date Service... Aug 30 11:20:48 volumio-se dbus-daemon[876]: [system] Successfully activated service 'org.freedesktop.timedate1' Aug 30 11:20:48 volumio-se systemd[1]: Started Time & Date Service. Aug 30 11:20:51 volumio-se systemd-timedated[1227]: Changed local time to Sat Aug 30 11:20:51 2025 Aug 30 11:20:51 volumio-se sudo[1225]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:51 volumio-se volumio-time-update[872]: volumio-time-update-util: System time updated successfully. Aug 30 11:20:51 volumio-se systemd[1]: Started Volumio Time Update Utility. Aug 30 11:20:51 volumio-se wireless.js[882]: trying... Aug 30 11:20:51 volumio-se sudo[1229]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 30 11:20:51 volumio-se sudo[1229]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:51 volumio-se sudo[1229]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:51 volumio-se wireless.js[882]: Connected to: ----TP-Link_EA52_5G Aug 30 11:20:51 volumio-se wireless.js[882]: ---- Aug 30 11:20:51 volumio-se sudo[1232]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Aug 30 11:20:51 volumio-se sudo[1232]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:20:51 volumio-se sudo[1232]: pam_unix(sudo:session): session closed for user root Aug 30 11:20:51 volumio-se wireless.js[882]: ... joined AP, wlan0 IPv4 is 192.168.0.105, ipV6 is undefined Aug 30 11:20:51 volumio-se wireless.js[882]: It's done! AP Aug 30 11:20:51 volumio-se systemd[1]: Started Wireless Services. Aug 30 11:20:51 volumio-se systemd[1]: Started Volumio Backend Module. Aug 30 11:20:51 volumio-se systemd[1]: Started Volumio Cpu Tweaker. Aug 30 11:20:51 volumio-se systemd[1]: Started Intel SST and HDA soundcard init service. Aug 30 11:20:51 volumio-se systemd[1]: Started Start Volumio Kiosk. Aug 30 11:20:51 volumio-se volumio-cpu-tweak[1238]: Setting RT Priority for mpd Aug 30 11:20:51 volumio-se volumio-cpu-tweak[1238]: Setting MPD Affinity Aug 30 11:20:51 volumio-se volumio-cpu-tweak[1238]: pid 1062's current affinity mask: ff Aug 30 11:20:51 volumio-se volumio-cpu-tweak[1238]: pid 1062's new affinity mask: 3 Aug 30 11:20:51 volumio-se volumio-cpu-tweak[1238]: VOLUMIO CPU TWEAK: Setting CPU Governor: performance Aug 30 11:20:51 volumio-se systemd[1]: volumio_cpu_tweak.service: Succeeded. Aug 30 11:20:51 volumio-se startx[1244]: X.Org X Server 1.20.4 Aug 30 11:20:51 volumio-se startx[1244]: X Protocol Version 11, Revision 0 Aug 30 11:20:51 volumio-se startx[1244]: Build Operating System: Linux 5.10.0-10-amd64 x86_64 Debian Aug 30 11:20:51 volumio-se startx[1244]: Current Operating System: Linux volumio-se 6.6.32-volumio #2 SMP PREEMPT_DYNAMIC Wed May 29 23:04:42 CEST 2024 x86_64 Aug 30 11:20:51 volumio-se startx[1244]: Kernel command line: BOOT_IMAGE=/vmlinuz initramfs.clear splash plymouth.ignore-serial-consoles quiet loglevel=0 biosdevname=0 imgpart=UUID=f730755b-3881-4204-852d-dfd4e1b8f9ca bootpart=UUID=EC94-4E40 datapart=UUID=224731fe-5fbb-4682-9f5d-38fa57114a4a hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh logo.nologo vt.global_cursor_default=0 acpi_backlight=vendor net.ifnames=0 use_kmsg=no Aug 30 11:20:51 volumio-se startx[1244]: Build Date: 18 December 2021 09:05:36AM Aug 30 11:20:51 volumio-se startx[1244]: xorg-server 2:1.20.4-1+deb10u4 (https://www.debian.org/support) Aug 30 11:20:51 volumio-se startx[1244]: Current version of pixman: 0.36.0 Aug 30 11:20:51 volumio-se startx[1244]: Before reporting problems, check http://wiki.x.org Aug 30 11:20:51 volumio-se startx[1244]: to make sure that you have the latest version. Aug 30 11:20:51 volumio-se startx[1244]: Markers: (--) probed, (**) from config file, (==) default setting, Aug 30 11:20:51 volumio-se startx[1244]: (++) from command line, (!!) notice, (II) informational, Aug 30 11:20:51 volumio-se startx[1244]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown. Aug 30 11:20:51 volumio-se startx[1244]: (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 30 11:20:51 2025 Aug 30 11:20:51 volumio-se startx[1244]: (==) Using system config directory "/usr/share/X11/xorg.conf.d" Aug 30 11:20:51 volumio-se startx[1244]: (II) AMDGPU(0): [KMS] Kernel modesetting enabled. Aug 30 11:20:51 volumio-se systemd[1]: soundcard-init.service: Succeeded. Aug 30 11:20:51 volumio-se ntpd[1222]: Soliciting pool server 193.106.144.6 Aug 30 11:20:52 volumio-se ntpd[1222]: Soliciting pool server 162.159.200.123 Aug 30 11:20:52 volumio-se ntpd[1222]: Soliciting pool server 162.159.200.1 Aug 30 11:20:53 volumio-se volumio-remote-updater[892]: [2025-08-30 11:20:53] [connect] Successful connection Aug 30 11:20:53 volumio-se ntpd[1222]: Soliciting pool server 31.28.161.68 Aug 30 11:20:53 volumio-se ntpd[1222]: Soliciting pool server 217.12.206.12 Aug 30 11:20:53 volumio-se ntpd[1222]: Soliciting pool server 109.110.82.19 Aug 30 11:20:54 volumio-se nmbd[995]: [2025/08/30 11:20:54.583735, 0] ../lib/util/become_daemon.c:138(daemon_ready) Aug 30 11:20:54 volumio-se nmbd[995]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections Aug 30 11:20:54 volumio-se systemd[1]: Started Samba NMB Daemon. Aug 30 11:20:54 volumio-se systemd[1]: Starting Samba Winbind Daemon... Aug 30 11:20:54 volumio-se ntpd[1222]: Soliciting pool server 194.54.80.29 Aug 30 11:20:54 volumio-se ntpd[1222]: Soliciting pool server 213.231.2.124 Aug 30 11:20:54 volumio-se ntpd[1222]: Soliciting pool server 91.236.251.24 Aug 30 11:20:54 volumio-se winbindd[1388]: [2025/08/30 11:20:54.984819, 0] ../source3/winbindd/winbindd_cache.c:3160(initialize_winbindd_cache) Aug 30 11:20:54 volumio-se winbindd[1388]: initialize_winbindd_cache: clearing cache and re-creating with version number 2 Aug 30 11:20:55 volumio-se ntpd[1222]: Soliciting pool server 79.142.192.4 Aug 30 11:20:56 volumio-se ntpd[1222]: Soliciting pool server 193.106.144.13 Aug 30 11:20:57 volumio-se ntpd[1222]: Soliciting pool server 91.236.251.13 Aug 30 11:20:58 volumio-se systemd[1]: systemd-fsckd.service: Succeeded. Aug 30 11:20:58 volumio-se winbindd[1388]: [2025/08/30 11:20:58.313246, 0] ../lib/util/become_daemon.c:138(daemon_ready) Aug 30 11:20:58 volumio-se winbindd[1388]: daemon_ready: STATUS=daemon 'winbindd' finished starting up and ready to serve connections Aug 30 11:20:58 volumio-se systemd[1]: Started Samba Winbind Daemon. Aug 30 11:20:58 volumio-se systemd[1]: Starting Samba SMB Daemon... Aug 30 11:20:59 volumio-se ntpd[1222]: receive: Unexpected origin timestamp 0xec5d40fa.b2c99a2d does not match aorg 0000000000.00000000 from server@193.106.144.13 xmt 0xec5d40fb.85a1d326 Aug 30 11:20:59 volumio-se ntpd[1222]: receive: Unexpected origin timestamp 0xec5d40fa.b2cceb5f does not match aorg 0000000000.00000000 from server@217.12.206.12 xmt 0xec5d40fb.868ef77f Aug 30 11:21:01 volumio-se volumio[1237]: info: ------------------------------------------- Aug 30 11:21:01 volumio-se volumio[1237]: info: ----- Volumio3 ---- Aug 30 11:21:01 volumio-se volumio[1237]: info: ------------------------------------------- Aug 30 11:21:01 volumio-se volumio[1237]: info: ----- System startup ---- Aug 30 11:21:01 volumio-se volumio[1237]: info: ------------------------------------------- Aug 30 11:21:01 volumio-se smbd[1408]: [2025/08/30 11:21:01.233543, 0] ../lib/util/become_daemon.c:138(daemon_ready) Aug 30 11:21:01 volumio-se smbd[1408]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections Aug 30 11:21:01 volumio-se systemd[1]: Started Samba SMB Daemon. Aug 30 11:21:01 volumio-se systemd[1]: Reached target Multi-User System. Aug 30 11:21:01 volumio-se systemd[1]: Reached target Graphical Interface. Aug 30 11:21:01 volumio-se systemd[1]: Starting Update UTMP about System Runlevel Changes... Aug 30 11:21:01 volumio-se systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. Aug 30 11:21:01 volumio-se systemd[1]: Started Update UTMP about System Runlevel Changes. Aug 30 11:21:01 volumio-se systemd[1]: Startup finished in 9.917s (firmware) + 7.207s (loader) + 33.848s (kernel) + 39.003s (userspace) = 1min 29.976s. Aug 30 11:21:01 volumio-se volumio[1237]: info: MYVOLUMIO Environment detected Aug 30 11:21:01 volumio-se volumio[1237]: info: Plugin folders cleanup Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning into folder /volumio/app/plugins/ Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning category audio_interface Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning category miscellanea Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning category music_service Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning category plugins.json Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning category system_controller Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning category user_interface Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning into folder /data/plugins/ Aug 30 11:21:01 volumio-se volumio[1237]: info: Scanning category music_service Aug 30 11:21:01 volumio-se volumio[1237]: info: Plugin folders cleanup completed Aug 30 11:21:01 volumio-se volumio[1237]: info: ------------------------------------------- Aug 30 11:21:01 volumio-se volumio[1237]: info: ----- Core plugins startup ---- Aug 30 11:21:01 volumio-se volumio[1237]: info: ------------------------------------------- Aug 30 11:21:01 volumio-se volumio[1237]: info: Loading plugins from folder /volumio/app/plugins/ Aug 30 11:21:01 volumio-se volumio[1237]: info: Adding plugin upnp to MyMusic Plugins Aug 30 11:21:01 volumio-se volumio[1237]: info: Adding plugin airplay_emulation to MyMusic Plugins Aug 30 11:21:01 volumio-se volumio[1237]: info: Adding plugin upnp_browser to MyMusic Plugins Aug 30 11:21:01 volumio-se volumio[1237]: info: Loading plugins from folder /data/plugins/ Aug 30 11:21:01 volumio-se volumio[1237]: info: Loading plugin "system"... Aug 30 11:21:01 volumio-se volumio[1237]: info: No id defined. Creating one Aug 30 11:21:01 volumio-se volumio[1237]: info: Loading plugin "appearance"... Aug 30 11:21:02 volumio-se systemd[1]: systemd-hostnamed.service: Succeeded. Aug 30 11:21:09 volumio-se volumio-remote-updater[892]: [2025-08-30 11:21:09] [connect] Successful connection Aug 30 11:21:19 volumio-se volumio[1237]: info: Loading plugin "network"... Aug 30 11:21:19 volumio-se volumio[1237]: info: Refreshing Cached IP Addresses Aug 30 11:21:19 volumio-se sudo[1492]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Aug 30 11:21:19 volumio-se sudo[1492]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:21:19 volumio-se sudo[1494]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Aug 30 11:21:19 volumio-se sudo[1494]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:21:19 volumio-se sudo[1494]: pam_unix(sudo:session): session closed for user root Aug 30 11:21:19 volumio-se volumio[1237]: info: Loading plugin "services"... Aug 30 11:21:19 volumio-se volumio[1237]: info: Loading plugin "alsa_controller"... Aug 30 11:21:19 volumio-se sudo[1492]: pam_unix(sudo:session): session closed for user root Aug 30 11:21:19 volumio-se sudo[1508]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan Aug 30 11:21:19 volumio-se sudo[1508]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:21:20 volumio-se volumio[1237]: warn: The ALSA output card is not set, defaulting to card [object Object] Aug 30 11:21:20 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Aug 30 11:21:20 volumio-se volumio[1237]: info: Found match in Cards Database: setting mixer for card HDMI Aug 30 11:21:20 volumio-se volumio[1237]: info: Setting mixer IEC958 for card HDMI Aug 30 11:21:20 volumio-se volumio[1237]: info: CoreCommandRouter::volumioUpdateVolumeSettings Aug 30 11:21:20 volumio-se volumio[1237]: info: CoreCommandRouter::volumioUpdateVolumeSettings Aug 30 11:21:20 volumio-se volumio[1237]: info: CoreCommandRouter::volumioUpdateVolumeSettings Aug 30 11:21:20 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Aug 30 11:21:20 volumio-se volumio[1237]: info: Loading plugin "wizard"... Aug 30 11:21:20 volumio-se volumio[1237]: info: Loading plugin "networkfs"... Aug 30 11:21:20 volumio-se volumio[1237]: info: Starting Udev Watcher for removable devices Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: SYSTEM Aug 30 11:21:20 volumio-se volumio[1237]: error: Cannot associate FS Label, not mounting Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: Windows Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: Data Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: WINPE Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: Onekey Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: WinRE Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: boot Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: volumio Aug 30 11:21:20 volumio-se volumio[1237]: info: Ignoring mount for partition: volumio_data Aug 30 11:21:20 volumio-se volumio[1237]: info: Mounting Device External Aug 30 11:21:20 volumio-se sudo[1559]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mount /dev/sda1 /mnt/USB/External -o noatime Aug 30 11:21:20 volumio-se sudo[1559]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 30 11:21:20 volumio-se mount.exfat[1561]: volume was not unmounted cleanly Aug 30 11:21:20 volumio-se sudo[1559]: pam_unix(sudo:session): session closed for user root Aug 30 11:21:20 volumio-se volumio[1237]: WARN: volume was not unmounted cleanly. Aug 30 11:21:20 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Aug 30 11:21:20 volumio-se volumio[1237]: info: Loading plugin "volumio_command_line_client"... Aug 30 11:21:20 volumio-se volumio[1237]: info: Loading plugin "upnp"... Aug 30 11:21:20 volumio-se volumio[1237]: info: [1756545680682] Starting Upmpd Daemon Aug 30 11:21:20 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Aug 30 11:21:20 volumio-se volumio[1237]: info: Loading plugin "my_music"... Aug 30 11:21:20 volumio-se volumio[1237]: info: Loading plugin "mpd"... Aug 30 11:21:21 volumio-se systemd[1]: systemd-timedated.service: Succeeded. Aug 30 11:21:23 volumio-se volumio[1237]: info: Loading plugin "upnp_browser"... Aug 30 11:21:23 volumio-se volumio[1237]: info: Loading plugin "alarm-clock"... Aug 30 11:21:23 volumio-se sudo[1508]: pam_unix(sudo:session): session closed for user root Aug 30 11:21:23 volumio-se volumio[1237]: info: Loading plugin "airplay_emulation"... Aug 30 11:21:23 volumio-se volumio[1237]: info: Starting Shairport Sync Aug 30 11:21:23 volumio-se volumio[1237]: info: Loading plugin "last_100"... Aug 30 11:21:23 volumio-se volumio[1237]: info: Loading plugin "webradio"... Aug 30 11:21:24 volumio-se volumio[1237]: info: Loading plugin "i2s_dacs"... Aug 30 11:21:24 volumio-se volumio[1237]: info: I2S DAC not set, start Auto-detection Aug 30 11:21:24 volumio-se volumio[1237]: info: Loading plugin "volumiodiscovery"... Aug 30 11:21:24 volumio-se volumio[1237]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Aug 30 11:21:24 volumio-se volumio[1237]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 30 11:21:24 volumio-se volumio[1237]: *** WARNING *** For more information see Aug 30 11:21:24 volumio-se volumio[1237]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Aug 30 11:21:24 volumio-se volumio[1237]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 30 11:21:24 volumio-se volumio[1237]: *** WARNING *** For more information see Aug 30 11:21:24 volumio-se node[1237]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Aug 30 11:21:24 volumio-se node[1237]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 30 11:21:24 volumio-se node[1237]: *** WARNING *** For more information see Aug 30 11:21:24 volumio-se node[1237]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Aug 30 11:21:24 volumio-se node[1237]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 30 11:21:24 volumio-se node[1237]: *** WARNING *** For more information see Aug 30 11:21:24 volumio-se volumio-remote-updater[892]: [2025-08-30 11:21:24] [connect] Successful connection Aug 30 11:21:24 volumio-se volumio[1237]: info: Applying required configuration parameters for plugin volumiodiscovery Aug 30 11:21:24 volumio-se volumio[1237]: info: Discovery: Started advertising with name: undefined Aug 30 11:21:24 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Aug 30 11:21:24 volumio-se volumio[1237]: info: Loading plugin "spop"... Aug 30 11:21:31 volumio-se volumiologrotate[874]: ls: cannot access '/var/log/samba/log.wb-VOLUMIO': No such file or directory Aug 30 11:21:31 volumio-se volumiologrotate[874]: ls: cannot access 'SE': No such file or directory Aug 30 11:21:33 volumio-se volumio[1237]: info: Loading plugin "youtube2"... Aug 30 11:21:39 volumio-se volumio-remote-updater[892]: [2025-08-30 11:21:39] [connect] Successful connection Aug 30 11:21:40 volumio-se volumio[1237]: info: Loading plugin "ytcr"... Aug 30 11:21:43 volumio-se volumio[1237]: info: Loading plugin "outputs"... Aug 30 11:21:43 volumio-se volumio[1237]: info: Loading plugin "albumart"... Aug 30 11:21:43 volumio-se volumio[1237]: info: Plugin example_plugin is not enabled Aug 30 11:21:43 volumio-se volumio[1237]: info: Loading plugin "inputs"... Aug 30 11:21:43 volumio-se volumio[1237]: info: Loading plugin "updater_comm"... Aug 30 11:21:43 volumio-se volumio[1237]: Forking 7 albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: info: Plugin mpdemulation is not enabled Aug 30 11:21:43 volumio-se volumio[1237]: info: Loading plugin "rest_api"... Aug 30 11:21:43 volumio-se volumio[1237]: info: Loading plugin "websocket"... Aug 30 11:21:43 volumio-se volumio[1237]: info: Starting Socket.io Server version 2.3.0 Aug 30 11:21:43 volumio-se volumio[1237]: info: Loading i18n strings for locale ru Aug 30 11:21:43 volumio-se volumio[1237]: Updating browse sources language Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 30 11:21:43 volumio-se volumio[1237]: Starting albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: Starting albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: Starting albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: Starting albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: Starting albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: Starting albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: Starting albumart workers Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreCommandRouter::initPlayerControls Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Aug 30 11:21:43 volumio-se volumio[1237]: Express server listening on port 3000 Aug 30 11:21:43 volumio-se volumio[1237]: [Metrics] WebUI: 50s 844.26ms Aug 30 11:21:43 volumio-se volumio[1237]: info: Setting Device type: x86 Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreStateMachine::resetVolumioState Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreStateMachine::getcurrentVolume Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreCommandRouter::volumioRetrievevolume Aug 30 11:21:43 volumio-se volumio[1237]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 30 11:21:44 volumio-se volumio[1237]: info: CoreCommandRouter::volumioRetrieveVolumeLevels Aug 30 11:21:44 volumio-se volumio[1237]: info: CoreStateMachine::getcurrentVolume Aug 30 11:21:44 volumio-se volumio[1237]: info: CoreCommandRouter::volumioRetrievevolume Aug 30 11:21:44 volumio-se volumio[1237]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Aug 30 11:21:44 volumio-se volumio[1237]: TypeError: Cannot read property 'charAt' of undefined Aug 30 11:21:44 volumio-se volumio[1237]: at Timeout._onTimeout (/volumio/app/plugins/audio_interface/upnp/index.js:199:24) Aug 30 11:21:44 volumio-se volumio[1237]: at listOnTimeout (internal/timers.js:557:17) Aug 30 11:21:44 volumio-se volumio[1237]: at processTimers (internal/timers.js:500:7) Aug 30 11:21:44 volumio-se volumio[1237]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Aug 30 11:21:44 volumio-se sudo[1884]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/journalctl --since=2025-08-30 11:20 Aug 30 11:21:44 volumio-se sudo[1884]: pam_unix(sudo:session): session opened for user root by (uid=0) PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" VOLUMIO_BUILD_VERSION="a142ed2648fb91920de0dde3a60cd39b5d0ba4f6" VOLUMIO_FE_VERSION="e7cae168f9927391640a091813b8a9656b6909b6" VOLUMIO_FE3_VERSION="df82a8f23c90a3617c15c55572c8aaea90d8b32a" VOLUMIO_BE_VERSION="04c18c158cc4bac70764c3360b25fcce0c69266a" VOLUMIO_ARCH="x64" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Tue 10 Jun 2025 05:26:48 PM CEST" VOLUMIO_VERSION="3.816" VOLUMIO_HARDWARE="x86_amd64" VOLUMIO_DEVICENAME="x86_64" VOLUMIO_HASH="a63f40325536655a08b14de2b295ce76"