-- Logs begin at Thu 2024-10-31 06:05:18 UTC, end at Thu 2024-10-31 06:06:58 UTC. -- Oct 31 06:05:18 volumio kernel: Booting Linux on physical CPU 0x0000000000 [0x410fd092] Oct 31 06:05:18 volumio kernel: Linux version 5.15.137 (khadas@2c345b2144f4) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 12.2.1 20221205, GNU ld (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 2.39.0.20221210) #1.7.1 SMP PREEMPT Thu Oct 24 14:15:48 UTC 2024 Oct 31 06:05:18 volumio kernel: Machine model: Khadas VIM4 Oct 31 06:05:18 volumio kernel: efi: UEFI not found. Oct 31 06:05:18 volumio kernel: 07400000 - 07500000, 1024 KB, ramoops@0x07400000 Oct 31 06:05:18 volumio kernel: 00000000 - 00080000, 512 KB, linux,dmc_monitor Oct 31 06:05:18 volumio kernel: 04f00000 - 05000000, 1024 KB, linux,iotrace Oct 31 06:05:18 volumio kernel: 40000000 - 40800000, 8192 KB, linux,dsp_fw0 Oct 31 06:05:18 volumio kernel: 40800000 - 41000000, 8192 KB, linux,dsp_fw1 Oct 31 06:05:18 volumio kernel: 3f800000 - 40000000, 8192 KB, linux,meson-fb Oct 31 06:05:18 volumio kernel: node heap-fb compatible matching fail Oct 31 06:05:18 volumio kernel: dec00000 - e0000000, 20480 KB, linux,vdin1_cma Oct 31 06:05:18 volumio kernel: 0x00000000dec00000..0x00000000dfffffff (20480 KiB) map reusable linux,vdin1_cma Oct 31 06:05:18 volumio kernel: Reserved memory: created DMA memory pool at 0x0000000005000000, size 36 MiB Oct 31 06:05:18 volumio kernel: 05000000 - 07400000, 36864 KB, linux,secmon Oct 31 06:05:18 volumio kernel: 0x0000000005000000..0x00000000073fffff (36864 KiB) nomap non-reusable linux,secmon Oct 31 06:05:18 volumio kernel: bec00000 - dec00000, 524288 KB, linux,pcie_dma_ops Oct 31 06:05:18 volumio kernel: 0x00000000bec00000..0x00000000debfffff (524288 KiB) map reusable linux,pcie_dma_ops Oct 31 06:05:18 volumio kernel: 23fc00000 - 240000000, 4096 KB, linux,ldc_mem Oct 31 06:05:18 volumio kernel: 0x000000023fc00000..0x000000023fffffff (4096 KiB) map reusable linux,ldc_mem Oct 31 06:05:18 volumio kernel: 23f400000 - 23fc00000, 8192 KB, linux,cma Oct 31 06:05:18 volumio kernel: 0x000000023f400000..0x000000023fbfffff (8192 KiB) map reusable linux,cma Oct 31 06:05:18 volumio kernel: 9f000000 - bec00000, 520192 KB, linux,codec_mm_cma Oct 31 06:05:18 volumio kernel: 0x000000009f000000..0x00000000bebfffff (520192 KiB) map reusable linux,codec_mm_cma Oct 31 06:05:18 volumio kernel: 23dc00000 - 23f400000, 24576 KB, linux,ge2d_cma Oct 31 06:05:18 volumio kernel: 0x000000023dc00000..0x000000023f3fffff (24576 KiB) map reusable linux,ge2d_cma Oct 31 06:05:18 volumio kernel: node linux,di_cma compatible matching fail Oct 31 06:05:18 volumio kernel: Reserved memory: created DMA memory pool at 0x00000000e0000000, size 0 MiB Oct 31 06:05:18 volumio kernel: e0000000 - e0000000, 0 KB, linux,ppmgr Oct 31 06:05:18 volumio kernel: 0x00000000e0000000..0x00000000dfffffff (0 KiB) map non-reusable linux,ppmgr Oct 31 06:05:18 volumio kernel: 97000000 - 9f000000, 131072 KB, linux,isp_cma Oct 31 06:05:18 volumio kernel: 0x0000000097000000..0x000000009effffff (131072 KiB) map reusable linux,isp_cma Oct 31 06:05:18 volumio kernel: 93000000 - 97000000, 65536 KB, linux,adapt_cma Oct 31 06:05:18 volumio kernel: 0x0000000093000000..0x0000000096ffffff (65536 KiB) map reusable linux,adapt_cma Oct 31 06:05:18 volumio kernel: node linux,ion-dev compatible matching fail Oct 31 06:05:18 volumio kernel: 0x00000000e0000000..0x00000000dfffffff (0 KiB) nomap non-reusable linux,ion-secure Oct 31 06:05:18 volumio kernel: node linux,ion-fb compatible matching fail Oct 31 06:05:18 volumio kernel: e0000000 - e0000000, 0 KB, linux,codec_mm_reserved Oct 31 06:05:18 volumio kernel: 0x00000000e0000000..0x00000000dfffffff (0 KiB) map non-reusable linux,codec_mm_reserved Oct 31 06:05:18 volumio kernel: 92000000 - 93000000, 16384 KB, linux,secure_vdec_reserved Oct 31 06:05:18 volumio kernel: 0x0000000092000000..0x0000000092ffffff (16384 KiB) nomap non-reusable linux,secure_vdec_reserved Oct 31 06:05:18 volumio kernel: 22b000000 - 23dc00000, 307200 KB, heap-gfx Oct 31 06:05:18 volumio kernel: 0x000000022b000000..0x000000023dbfffff (307200 KiB) map reusable heap-gfx Oct 31 06:05:18 volumio kernel: 0x0000000000000000..0x000000000007ffff (512 KiB) map non-reusable linux,dmc_monitor Oct 31 06:05:18 volumio kernel: 0x0000000004f00000..0x0000000004ffffff (1024 KiB) map non-reusable linux,iotrace Oct 31 06:05:18 volumio kernel: 0x0000000007400000..0x00000000074fffff (1024 KiB) map non-reusable ramoops@0x07400000 Oct 31 06:05:18 volumio kernel: 0x000000003f800000..0x000000003fffffff (8192 KiB) map reusable linux,meson-fb Oct 31 06:05:18 volumio kernel: 0x0000000040000000..0x00000000407fffff (8192 KiB) map reusable linux,dsp_fw0 Oct 31 06:05:18 volumio kernel: 0x0000000040800000..0x0000000040ffffff (8192 KiB) map reusable linux,dsp_fw1 Oct 31 06:05:18 volumio kernel: Zone ranges: Oct 31 06:05:18 volumio kernel: DMA32 [mem 0x0000000000000000-0x00000000ffffffff] Oct 31 06:05:18 volumio kernel: Normal [mem 0x0000000100000000-0x000000023fffffff] Oct 31 06:05:18 volumio kernel: Movable zone start for each node Oct 31 06:05:18 volumio kernel: Early memory node ranges Oct 31 06:05:18 volumio kernel: node 0: [mem 0x0000000000000000-0x0000000004ffffff] Oct 31 06:05:18 volumio kernel: node 0: [mem 0x0000000005000000-0x00000000073fffff] Oct 31 06:05:18 volumio kernel: node 0: [mem 0x0000000007400000-0x0000000091ffffff] Oct 31 06:05:18 volumio kernel: node 0: [mem 0x0000000092000000-0x0000000092ffffff] Oct 31 06:05:18 volumio kernel: node 0: [mem 0x0000000093000000-0x00000000dfffffff] Oct 31 06:05:18 volumio kernel: node 0: [mem 0x0000000100000000-0x00000001dfffffff] Oct 31 06:05:18 volumio kernel: node 0: [mem 0x0000000200000000-0x000000023fffffff] Oct 31 06:05:18 volumio kernel: Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff] Oct 31 06:05:18 volumio kernel: psci: probing for conduit method from DT. Oct 31 06:05:18 volumio kernel: psci: PSCIv1.0 detected in firmware. Oct 31 06:05:18 volumio kernel: psci: Using standard PSCI v0.2 function IDs Oct 31 06:05:18 volumio kernel: psci: Trusted OS migration not required Oct 31 06:05:18 volumio kernel: psci: SMC Calling Convention v1.1 Oct 31 06:05:18 volumio kernel: no apu_id or apu_hwid Oct 31 06:05:18 volumio kernel: percpu: Embedded 29 pages/cpu s78616 r8192 d31976 u118784 Oct 31 06:05:18 volumio kernel: pcpu-alloc: s78616 r8192 d31976 u118784 alloc=29*4096 Oct 31 06:05:18 volumio kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU0 Oct 31 06:05:18 volumio kernel: CPU features: SYS_ID_AA64MMFR1_EL1[11:8]: already set to 0 Oct 31 06:05:18 volumio kernel: CPU features: detected: Spectre-v2 Oct 31 06:05:18 volumio kernel: CPU features: detected: Spectre-v4 Oct 31 06:05:18 volumio kernel: CPU features: detected: Spectre-BHB Oct 31 06:05:18 volumio kernel: CPU features: kernel page table isolation forced ON by KASLR Oct 31 06:05:18 volumio kernel: CPU features: detected: Kernel page table isolation (KPTI) Oct 31 06:05:18 volumio kernel: CPU features: detected: ARM erratum 858921 Oct 31 06:05:18 volumio kernel: Built 1 zonelists, mobility grouping on. Total pages: 2064384 Oct 31 06:05:18 volumio kernel: Kernel command line: kasan.stacktrace=off kvm-arm.mode=protected cgroup_disable=pressure bootpart=UUID=EC20-43C7 imgpart=UUID=4b498279-ddb6-49ce-87fc-6f935512cfbf datapart=UUID=2074f9aa-465c-4f72-8941-39b708e6803f imgfile=/volumio_current.sqsh uuidconfig=uEnv.txt hwdevice= rootflags=data=writeback rw rootfstype=ext4 no_console_suspend earlycon=aml-uart,0xfe078000 fsck.repair=yes net.ifnames=0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scsi_mod.scan=async xhci_hcd.quirks=0x800000 scramble_reg=0xfe02e030 gamma=0 khadas_board=VIM4 boot_source=emmc otg_device=1 logo=osd0,loaded,0x3fdeec00 vout=1080p60hz,enable panel_type=mipi_0 hdmitx=,444,8bit hdmimode=1080p60hz hdmichecksum=0xb8530000 hdr_force_mode= dolby_status= frac_rate_policy=1 osd_reverse=0 video_reverse=0 init_on_alloc=0 nn_adj_vol=0 powermode=on lcd_ctrl=0x37000083 outputmode=1080p60hz hdmitx=,444,8bit panel1_type=vbyone_1 lcd1_ctrl=0x00000000 panel2_type= Oct 31 06:05:18 volumio kernel: cgroup: Disabling pressure control group feature Oct 31 06:05:18 volumio kernel: [pm]: scramble_reg=fe02e030 Oct 31 06:05:18 volumio kernel: vout: 1080p60hz Oct 31 06:05:18 volumio kernel: vout: enable: 1 Oct 31 06:05:18 volumio kernel: lcd: panel_type: mipi_0 Oct 31 06:05:18 volumio kernel: vpp_axis_reverse: bootargs is 0 Oct 31 06:05:18 volumio kernel: vdin_get_video_reverse: bootargs is 0. Oct 31 06:05:18 volumio kernel: lcd: lcd_ctrl: 0x37000083 Oct 31 06:05:18 volumio kernel: lcd: panel1_type: vbyone_1 Oct 31 06:05:18 volumio kernel: lcd: lcd1_ctrl: 0x00000000 Oct 31 06:05:18 volumio kernel: lcd: panel2_type: lvds_1 Oct 31 06:05:18 volumio kernel: lcd: lcd2_ctrl: 0x00000000 Oct 31 06:05:18 volumio kernel: init_wol_state, wol_enable=0 Oct 31 06:05:18 volumio kernel: Unknown kernel command line parameters "bootpart=UUID=EC20-43C7 imgpart=UUID=4b498279-ddb6-49ce-87fc-6f935512cfbf datapart=UUID=2074f9aa-465c-4f72-8941-39b708e6803f imgfile=/volumio_current.sqsh uuidconfig=uEnv.txt hwdevice= scramble_reg=0xfe02e030 gamma=0 khadas_board=VIM4 boot_source=emmc otg_device=1 logo=osd0,loaded,0x3fdeec00 vout=1080p60hz panel_type=mipi_0 hdmitx=,444,8bit hdmimode=1080p60hz hdmichecksum=0xb8530000 hdr_force_mode= dolby_status= frac_rate_policy=1 video_reverse=0 nn_adj_vol=0 powermode=on lcd_ctrl=0x37000083 panel1_type=vbyone_1 lcd1_ctrl=0x00000000 panel2_type=lvds_1 lcd2_ctrl=0x00000000 mac=c8:63:14:72:5f:11 wol_enable=0 reboot_mode=normal fan=auto partition_type=generic", will be passed to user space. Oct 31 06:05:18 volumio kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Oct 31 06:05:18 volumio kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) Oct 31 06:05:18 volumio kernel: mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 31 06:05:18 volumio kernel: zone:DMA32, spaned pages:1048576, total:1048576 Oct 31 06:05:18 volumio kernel: zone:Normal, spaned pages:1310720, total:2359296 Oct 31 06:05:18 volumio kernel: page_trace_pre_work, trace buffer:ffffff8091700000, size:900000, end:ffffff8092000000, module: 0 Oct 31 06:05:18 volumio kernel: software IO TLB: mapped [mem 0x0000000081700000-0x0000000091700000] (256MB) Oct 31 06:05:18 volumio kernel: Virtual kernel memory layout: Oct 31 06:05:18 volumio kernel: modules : 0xffffffc000000000 - 0xffffffc008000000 ( 128 MB) Oct 31 06:05:18 volumio kernel: vmalloc : 0xffffffc008000000 - 0xfffffffdf0000000 ( 247 GB) Oct 31 06:05:18 volumio kernel: .text : 0xffffffdf08000000 - 0xffffffdf095e0000 ( 22400 KB) 0x1200000 Oct 31 06:05:18 volumio kernel: .rodata : 0xffffffdf095e0000 - 0xffffffdf0a280000 ( 12928 KB) 0x27e0000 Oct 31 06:05:18 volumio kernel: .init : 0xffffffdf0a280000 - 0xffffffdf0a680000 ( 4096 KB) 0x27e0000 Oct 31 06:05:18 volumio kernel: .data : 0xffffffdf0a680000 - 0xffffffdf0ac55200 ( 5973 KB) 0x3880000 Oct 31 06:05:18 volumio kernel: .bss : 0xffffffdf0ac55200 - 0xffffffdf0aeb83c1 ( 2445 KB) 0x3e55200 Oct 31 06:05:18 volumio kernel: fixed : 0xfffffffdfdbf9000 - 0xfffffffdfe000000 ( 4124 KB) Oct 31 06:05:18 volumio kernel: PCI I/O : 0xfffffffdfe800000 - 0xfffffffdff800000 ( 16 MB) Oct 31 06:05:18 volumio kernel: vmemmap : 0xfffffffe00000000 - 0xffffffff00000000 ( 4 GB maximum) Oct 31 06:05:18 volumio kernel: 0xfffffffe00000000 - 0xfffffffe09000000 ( 144 MB actual) Oct 31 06:05:18 volumio kernel: memory : 0xffffff8000000000 - 0xffffff8240000000 ( 9216 MB) 0x0 Oct 31 06:05:18 volumio kernel: offset : 0x1f00000000 Oct 31 06:05:18 volumio kernel: Memory: 6204076K/8388608K available (22336K kernel code, 5972K rwdata, 12868K rodata, 4096K init, 2444K bss, 578900K reserved, 1605632K cma-reserved) Oct 31 06:05:18 volumio kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Oct 31 06:05:18 volumio kernel: trace event string verifier disabled Oct 31 06:05:18 volumio kernel: rcu: Preemptible hierarchical RCU implementation. Oct 31 06:05:18 volumio kernel: rcu: RCU event tracing is enabled. Oct 31 06:05:18 volumio kernel: rcu: RCU dyntick-idle grace-period acceleration is enabled. Oct 31 06:05:18 volumio kernel: rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8. Oct 31 06:05:18 volumio kernel: rcu: RCU priority boosting: priority 1 delay 500 ms. Oct 31 06:05:18 volumio kernel: Trampoline variant of Tasks RCU enabled. Oct 31 06:05:18 volumio kernel: Tracing variant of Tasks RCU enabled. Oct 31 06:05:18 volumio kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 31 06:05:18 volumio kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 Oct 31 06:05:18 volumio kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 Oct 31 06:05:18 volumio kernel: GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set Oct 31 06:05:18 volumio kernel: Root IRQ handler: gic_handle_irq Oct 31 06:05:18 volumio kernel: [freertos]: rtos_reserved device node find error Oct 31 06:05:18 volumio kernel: rcu: Offload RCU callbacks from CPUs: (none). Oct 31 06:05:18 volumio kernel: kfence: initialized - using 524288 bytes for 63 objects at 0x(____ptrval____)-0x(____ptrval____) Oct 31 06:05:18 volumio kernel: arch_timer: Enabling local workaround for ARM erratum 858921 Oct 31 06:05:18 volumio kernel: arch_timer: CPU0: Trapping CNTVCT access Oct 31 06:05:18 volumio kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 31 06:05:18 volumio kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 31 06:05:18 volumio kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 31 06:05:18 volumio kernel: Console: colour dummy device 80x25 Oct 31 06:05:18 volumio kernel: printk: console [tty0] enabled Oct 31 06:05:18 volumio kernel: serial port 0 not yet initialized Oct 31 06:05:18 volumio kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 31 06:05:18 volumio kernel: pid_max: default: 32768 minimum: 301 Oct 31 06:05:18 volumio kernel: LSM: Security Framework initializing Oct 31 06:05:18 volumio kernel: SELinux: Initializing. Oct 31 06:05:18 volumio kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 31 06:05:18 volumio kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 31 06:05:18 volumio kernel: rcu: Hierarchical SRCU implementation. Oct 31 06:05:18 volumio kernel: dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build Oct 31 06:05:18 volumio kernel: EFI services will not be available. Oct 31 06:05:18 volumio kernel: smp: Bringing up secondary CPUs ... Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU1 Oct 31 06:05:18 volumio kernel: arch_timer: Enabling local workaround for ARM erratum 858921 Oct 31 06:05:18 volumio kernel: arch_timer: CPU1: Trapping CNTVCT access Oct 31 06:05:18 volumio kernel: CPU1: Booted secondary processor 0x0000000001 [0x410fd092] Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU2 Oct 31 06:05:18 volumio kernel: arch_timer: Enabling local workaround for ARM erratum 858921 Oct 31 06:05:18 volumio kernel: arch_timer: CPU2: Trapping CNTVCT access Oct 31 06:05:18 volumio kernel: CPU2: Booted secondary processor 0x0000000002 [0x410fd092] Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU3 Oct 31 06:05:18 volumio kernel: arch_timer: Enabling local workaround for ARM erratum 858921 Oct 31 06:05:18 volumio kernel: arch_timer: CPU3: Trapping CNTVCT access Oct 31 06:05:18 volumio kernel: CPU3: Booted secondary processor 0x0000000003 [0x410fd092] Oct 31 06:05:18 volumio kernel: CPU features: detected: ARM erratum 845719 Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU4 Oct 31 06:05:18 volumio kernel: CPU4: Booted secondary processor 0x0000000100 [0x410fd034] Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU5 Oct 31 06:05:18 volumio kernel: CPU5: Booted secondary processor 0x0000000101 [0x410fd034] Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU6 Oct 31 06:05:18 volumio kernel: CPU6: Booted secondary processor 0x0000000102 [0x410fd034] Oct 31 06:05:18 volumio kernel: Detected VIPT I-cache on CPU7 Oct 31 06:05:18 volumio kernel: CPU7: Booted secondary processor 0x0000000103 [0x410fd034] Oct 31 06:05:18 volumio kernel: smp: Brought up 1 node, 8 CPUs Oct 31 06:05:18 volumio kernel: SMP: Total of 8 processors activated. Oct 31 06:05:18 volumio kernel: CPU features: detected: 32-bit EL0 Support Oct 31 06:05:18 volumio kernel: CPU features: detected: CRC32 instructions Oct 31 06:05:18 volumio kernel: CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching Oct 31 06:05:18 volumio kernel: CPU: All CPU(s) started at EL2 Oct 31 06:05:18 volumio kernel: alternatives: patching kernel code Oct 31 06:05:18 volumio kernel: devtmpfs: initialized Oct 31 06:05:18 volumio kernel: KASLR enabled Oct 31 06:05:18 volumio kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 31 06:05:18 volumio kernel: futex hash table entries: 2048 (order: 5, 131072 bytes, linear) Oct 31 06:05:18 volumio kernel: pinctrl core: initialized pinctrl subsystem Oct 31 06:05:18 volumio kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 31 06:05:18 volumio kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations Oct 31 06:05:18 volumio kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations Oct 31 06:05:18 volumio kernel: audit: initializing netlink subsys (disabled) Oct 31 06:05:18 volumio kernel: audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1 Oct 31 06:05:18 volumio kernel: thermal_sys: Registered thermal governor 'user_space' Oct 31 06:05:18 volumio kernel: thermal_sys: Registered thermal governor 'power_allocator' Oct 31 06:05:18 volumio kernel: cpuidle: using governor menu Oct 31 06:05:18 volumio kernel: hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. Oct 31 06:05:18 volumio kernel: ASID allocator initialised with 32768 entries Oct 31 06:05:18 volumio kernel: Serial: AMBA PL011 UART driver Oct 31 06:05:18 volumio kernel: printk: console [ramoops-1] enabled Oct 31 06:05:18 volumio kernel: pstore: Registered ramoops as persistent store backend Oct 31 06:05:18 volumio kernel: ramoops: using 0x100000@0x7400000, ecc: 0 Oct 31 06:05:18 volumio kernel: platform ff900000.drm-vpu: Fixing up cyclic dependency with dummy_venc Oct 31 06:05:18 volumio kernel: platform ff900000.drm-vpu: Fixing up cyclic dependency with ff000000.amhdmitx Oct 31 06:05:18 volumio kernel: aml_max_pfn: 240000 Oct 31 06:05:18 volumio kernel: aml_smmu aml_smmu: assigned reserved memory node linux,pcie_dma_ops Oct 31 06:05:18 volumio kernel: aml_smmu aml_smmu: tee protect memory: 512 MiB at 0xbec00000 Oct 31 06:05:18 volumio kernel: mapped [mem 0xbec00000-0xc6c00000] (128MB) Oct 31 06:05:18 volumio kernel: aml DMA: preallocated 952 KiB GFP_KERNEL pool for atomic allocations Oct 31 06:05:18 volumio kernel: AML_CMA_TASK (67) used greatest stack depth: 13280 bytes left Oct 31 06:05:18 volumio kernel: raid6: neonx8 gen() 5770 MB/s Oct 31 06:05:18 volumio kernel: raid6: neonx8 xor() 4208 MB/s Oct 31 06:05:18 volumio kernel: raid6: neonx4 gen() 6180 MB/s Oct 31 06:05:18 volumio kernel: raid6: neonx4 xor() 4560 MB/s Oct 31 06:05:18 volumio kernel: raid6: neonx2 gen() 4701 MB/s Oct 31 06:05:18 volumio kernel: raid6: neonx2 xor() 4302 MB/s Oct 31 06:05:18 volumio kernel: raid6: neonx1 gen() 3710 MB/s Oct 31 06:05:18 volumio kernel: raid6: neonx1 xor() 3238 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x8 gen() 2673 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x8 xor() 1415 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x4 gen() 2854 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x4 xor() 1443 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x2 gen() 2703 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x2 xor() 1232 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x1 gen() 2215 MB/s Oct 31 06:05:18 volumio kernel: raid6: int64x1 xor() 905 MB/s Oct 31 06:05:18 volumio kernel: raid6: using algorithm neonx4 gen() 6180 MB/s Oct 31 06:05:18 volumio kernel: raid6: .... xor() 4560 MB/s, rmw enabled Oct 31 06:05:18 volumio kernel: raid6: using neon recovery algorithm Oct 31 06:05:18 volumio kernel: iommu: Default domain type: Translated Oct 31 06:05:18 volumio kernel: iommu: DMA domain TLB invalidation policy: strict mode Oct 31 06:05:18 volumio kernel: SCSI subsystem initialized Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver usbfs Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver hub Oct 31 06:05:18 volumio kernel: usbcore: registered new device driver usb Oct 31 06:05:18 volumio kernel: mc: Linux media interface: v0.10 Oct 31 06:05:18 volumio kernel: videodev: Linux video capture interface: v2.00 Oct 31 06:05:18 volumio kernel: pps_core: LinuxPPS API ver. 1 registered Oct 31 06:05:18 volumio kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 31 06:05:18 volumio kernel: PTP clock support registered Oct 31 06:05:18 volumio kernel: EDAC MC: Ver: 3.0.0 Oct 31 06:05:18 volumio kernel: Advanced Linux Sound Architecture Driver Initialized. Oct 31 06:05:18 volumio kernel: Bluetooth: Core ver 2.22 Oct 31 06:05:18 volumio kernel: NET: Registered PF_BLUETOOTH protocol family Oct 31 06:05:18 volumio kernel: Bluetooth: HCI device and connection manager initialized Oct 31 06:05:18 volumio kernel: Bluetooth: HCI socket layer initialized Oct 31 06:05:18 volumio kernel: Bluetooth: L2CAP socket layer initialized Oct 31 06:05:18 volumio kernel: Bluetooth: SCO socket layer initialized Oct 31 06:05:18 volumio kernel: NetLabel: Initializing Oct 31 06:05:18 volumio kernel: NetLabel: domain hash size = 128 Oct 31 06:05:18 volumio kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 31 06:05:18 volumio kernel: NetLabel: unlabeled traffic allowed by default Oct 31 06:05:18 volumio kernel: clocksource: Switched to clocksource arch_sys_counter Oct 31 06:05:18 volumio kernel: VFS: Disk quotas dquot_6.6.0 Oct 31 06:05:18 volumio kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 31 06:05:18 volumio kernel: NET: Registered PF_INET protocol family Oct 31 06:05:18 volumio kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) Oct 31 06:05:18 volumio kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 31 06:05:18 volumio kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 31 06:05:18 volumio kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) Oct 31 06:05:18 volumio kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) Oct 31 06:05:18 volumio kernel: TCP: Hash tables configured (established 65536 bind 65536) Oct 31 06:05:18 volumio kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) Oct 31 06:05:18 volumio kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) Oct 31 06:05:18 volumio kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) Oct 31 06:05:18 volumio kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 31 06:05:18 volumio kernel: NET: Registered PF_XDP protocol family Oct 31 06:05:18 volumio kernel: PCI: CLS 0 bytes, default 64 Oct 31 06:05:18 volumio kernel: Trying to unpack rootfs image as initramfs... Oct 31 06:05:18 volumio kernel: hw perfevents: enabled with armv8_cortex_a73 PMU driver, 7 counters available Oct 31 06:05:18 volumio kernel: hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available Oct 31 06:05:18 volumio kernel: Initialise system trusted keyrings Oct 31 06:05:18 volumio kernel: workingset: timestamp_bits=46 max_order=21 bucket_order=0 Oct 31 06:05:18 volumio kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 31 06:05:18 volumio kernel: fuse: init (API version 7.36) Oct 31 06:05:18 volumio kernel: xor: measuring software checksum speed Oct 31 06:05:18 volumio kernel: 8regs : 7002 MB/sec Oct 31 06:05:18 volumio kernel: 32regs : 8283 MB/sec Oct 31 06:05:18 volumio kernel: arm64_neon : 6366 MB/sec Oct 31 06:05:18 volumio kernel: xor: using function: 32regs (8283 MB/sec) Oct 31 06:05:18 volumio kernel: Key type asymmetric registered Oct 31 06:05:18 volumio kernel: Asymmetric key parser 'x509' registered Oct 31 06:05:18 volumio kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 236) Oct 31 06:05:18 volumio kernel: io scheduler mq-deadline registered Oct 31 06:05:18 volumio kernel: io scheduler kyber registered Oct 31 06:05:18 volumio kernel: io scheduler bfq registered Oct 31 06:05:18 volumio kernel: gpiomem-aml fe004000.gpiomem: Initialised: Registers at 0xfe004000 Oct 31 06:05:18 volumio kernel: cacheinfo: Unable to detect cache hierarchy for CPU 0 Oct 31 06:05:18 volumio kernel: brd: module loaded Oct 31 06:05:18 volumio kernel: loop: module loaded Oct 31 06:05:18 volumio kernel: SPI driver spidev has no spi_device_id for linux,spidev Oct 31 06:05:18 volumio kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. Oct 31 06:05:18 volumio kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. Oct 31 06:05:18 volumio kernel: MACsec IEEE 802.1AE Oct 31 06:05:18 volumio kernel: tun: Universal TUN/TAP device driver, 1.6 Oct 31 06:05:18 volumio kernel: PPP generic driver version 2.4.2 Oct 31 06:05:18 volumio kernel: PPP BSD Compression module registered Oct 31 06:05:18 volumio kernel: PPP Deflate Compression module registered Oct 31 06:05:18 volumio kernel: PPP MPPE Compression module registered Oct 31 06:05:18 volumio kernel: NET: Registered PF_PPPOX protocol family Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver asix Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver ax88179_178a Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver cdc_ether Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver cdc_eem Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver rndis_host Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver cdc_ncm Oct 31 06:05:18 volumio kernel: GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.1 Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver GobiNet Oct 31 06:05:18 volumio kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 31 06:05:18 volumio kernel: ehci-pci: EHCI PCI platform driver Oct 31 06:05:18 volumio kernel: ehci-platform: EHCI generic platform driver Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver cdc_acm Oct 31 06:05:18 volumio kernel: cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver usb-storage Oct 31 06:05:18 volumio kernel: sensor_register_slave:kxtj3,id=0 Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver uvcvideo Oct 31 06:05:18 volumio kernel: gspca_main: v2.14.0 registered Oct 31 06:05:18 volumio kernel: Driver for 1-wire Dallas network protocol. Oct 31 06:05:18 volumio kernel: device-mapper: uevent: version 1.0.3 Oct 31 06:05:18 volumio kernel: device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com Oct 31 06:05:18 volumio kernel: Bluetooth: HCI UART driver ver 2.3 Oct 31 06:05:18 volumio kernel: Bluetooth: HCI UART protocol H4 registered Oct 31 06:05:18 volumio kernel: Bluetooth: HCI UART protocol BCSP registered Oct 31 06:05:18 volumio kernel: Bluetooth: HCI UART protocol LL registered Oct 31 06:05:18 volumio kernel: Bluetooth: HCI UART protocol Broadcom registered Oct 31 06:05:18 volumio kernel: Bluetooth: HCI UART protocol QCA registered Oct 31 06:05:18 volumio kernel: sdhci: Secure Digital Host Controller Interface driver Oct 31 06:05:18 volumio kernel: sdhci: Copyright(c) Pierre Ossman Oct 31 06:05:18 volumio kernel: sdhci-pltfm: SDHCI platform and OF driver helper Oct 31 06:05:18 volumio kernel: hid: raw HID events driver (C) Jiri Kosina Oct 31 06:05:18 volumio kernel: ashmem: initialized Oct 31 06:05:18 volumio kernel: gnss: GNSS driver registered with major 505 Oct 31 06:05:18 volumio kernel: usbcore: registered new interface driver snd-usb-audio Oct 31 06:05:18 volumio kernel: fe078000.serial: ttyS0 at MMIO 0xfe078000 (irq = 57, base_baud = 1500000) is a meson_uart Oct 31 06:05:18 volumio kernel: Freeing initrd memory: 13484K Oct 31 06:05:18 volumio kernel: printk: console [ttyS0] enabled Oct 31 06:05:18 volumio kernel: [debug]: fiq_phy_addr:50f7000, fiq_buf_size: 2000, fiq_virt_addr:ffffffc0084c2000 Oct 31 06:05:18 volumio kernel: [debug]: cpu:0 sd:ffffff81001a8c00 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:0 sd:ffffff81001aa000 flags:86f->86f Oct 31 06:05:18 volumio kernel: [debug]: cpu:1 sd:ffffff81001aba00 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:1 sd:ffffff81001aae00 flags:86f->86f Oct 31 06:05:18 volumio kernel: [debug]: cpu:2 sd:ffffff81001a8600 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:2 sd:ffffff81001a8a00 flags:86f->86f Oct 31 06:05:18 volumio kernel: [debug]: cpu:3 sd:ffffff81001a9000 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:3 sd:ffffff810033aa00 flags:86f->86f Oct 31 06:05:18 volumio kernel: [debug]: cpu:4 sd:ffffff81001ab400 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:4 sd:ffffff810033b000 flags:86f->86f Oct 31 06:05:18 volumio kernel: [debug]: cpu:5 sd:ffffff81001a8e00 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:5 sd:ffffff8100339c00 flags:86f->86f Oct 31 06:05:18 volumio kernel: [debug]: cpu:6 sd:ffffff81001aa600 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:6 sd:ffffff8100338200 flags:86f->86f Oct 31 06:05:18 volumio kernel: [debug]: cpu:7 sd:ffffff81001aac00 flags:10f->10f Oct 31 06:05:18 volumio kernel: [debug]: cpu:7 sd:ffffff8100339200 flags:86f->86f Oct 31 06:05:18 volumio kernel: [memory-debug]: dmc version:1.6 Oct 31 06:05:18 volumio kernel: [memory-debug]: dmc_trace_buf: ffffff8091700000, maddr:0 Oct 31 06:05:18 volumio kernel: [memory-debug]: DMC DEBUG MEMORY ENABLED: range:0-7ffff, device=102, debug=10d Oct 31 06:05:18 volumio kernel: [memory-debug]: range:00000000 - 0007ffff, device: 102 Oct 31 06:05:18 volumio kernel: [memory-debug]: dmc_irq_set: save_irq=1, request=1 Oct 31 06:05:18 volumio kernel: [memory-debug]: ramdump, Total Memory:[8192 MB] Oct 31 06:05:18 volumio kernel: [memory-debug]: NO valid ramdump args:0 0 Oct 31 06:05:18 volumio kernel: [memory-debug]: Freeing free_reserved memory: 1024K Oct 31 06:05:18 volumio kernel: [secmon]: reserve_mem_size:0x2300000 Oct 31 06:05:18 volumio kernel: [secmon]: share in base: 0xffffffc008541000, share out base: 0xffffffc00808d000 Oct 31 06:05:18 volumio kernel: [secmon]: phy_in_base: 0x50f9000, phy_out_base: 0x50ff000 Oct 31 06:05:18 volumio kernel: [gpio]: 157 to 12 gpio interrupt mux initialized Oct 31 06:05:18 volumio kernel: meson_mbox_fifo fe006000.mbox_fifo: Do not support aocpu alive detection -22 Oct 31 06:05:18 volumio kernel: [cpuinfo]: build info: 2024.10.24-14.15.49, common_drivers: 61860aa97d49-dirty Oct 31 06:05:18 volumio kernel: [cpuinfo]: kernel upgrade info: <17> <2024-03-06> <2ac1467c0ae0-2c803ee245bb> Oct 31 06:05:18 volumio kernel: [cpuinfo]: serial = 360b0103000000001018810911605690 Oct 31 06:05:18 volumio kernel: [cpufreq]: cpu regulator not ready, retry! Oct 31 06:05:18 volumio kernel: efuse efuse: can't get reg resource Oct 31 06:05:18 volumio kernel: [efuse-unifykey]: failed to find match efuse key Oct 31 06:05:18 volumio kernel: [efuse-unifykey]: fail to obtain phy addr of shared mem Oct 31 06:05:18 volumio kernel: meson-gx-mmc fe08a000.sd: Got CD GPIO Oct 31 06:05:18 volumio kernel: rtc-hym8563 6-0051: registered as rtc0 Oct 31 06:05:18 volumio kernel: rtc-hym8563 6-0051: setting system clock to 2024-10-31T06:05:11 UTC (1730354711) Oct 31 06:05:18 volumio kernel: random: crng init done Oct 31 06:05:18 volumio kernel: optee: probing for conduit method. Oct 31 06:05:18 volumio kernel: optee: revision 3.8 (ec8c40b0) Oct 31 06:05:18 volumio kernel: optee: initialized driver Oct 31 06:05:18 volumio kernel: meson-gx-mmc fe08c000.mmc: 13 [0x10000], CRC[0x2400] Oct 31 06:05:18 volumio kernel: meson-gx-mmc fe08c000.mmc: 13 [0x10000], CRC[0x2400] Oct 31 06:05:18 volumio kernel: meson-gx-mmc fe08c000.mmc: 13 [0x10000], CRC[0x2400] Oct 31 06:05:18 volumio kernel: meson-gx-mmc fe08c000.mmc: 13 [0x10000], CRC[0x2400] Oct 31 06:05:18 volumio kernel: input: gpio_keypad as /devices/platform/gpio_keypad/input/input0 Oct 31 06:05:18 volumio kernel: adc_keypad adc_keypad: Not find mbox channel byidx Oct 31 06:05:18 volumio kernel: [mmc]: mmc0: adj_win: < 0 1 2 3 5 > Oct 31 06:05:18 volumio kernel: [input]: mbox chan is NULL Oct 31 06:05:18 volumio kernel: input: ir_keypad1 as /devices/platform/fe084040.ir/input/input2 Oct 31 06:05:18 volumio kernel: input: ir_keypad1 as /devices/platform/fe084040.ir/input/input3 Oct 31 06:05:18 volumio kernel: input: ir_keypad as /devices/platform/fe084040.ir/input/input1 Oct 31 06:05:18 volumio kernel: [dvb]: aml_dvb_extern_init: OK, version: V1.20 Oct 31 06:05:18 volumio kernel: aml_aucpu fe09e080.aucpu: Direct firmware load for aucpu_fw.bin failed with error -2 Oct 31 06:05:18 volumio kernel: load aucpu_fw.bin fail, result=-2 Oct 31 06:05:18 volumio kernel: load start_aucpu_fw fail Oct 31 06:05:18 volumio kernel: vpu: vpu: driver version: v20231129(3-t7) Oct 31 06:05:18 volumio kernel: vpu: vpu: load vpu_clk: 666666667Hz(8) Oct 31 06:05:18 volumio kernel: vpu: vpu: vpu_probe OK Oct 31 06:05:18 volumio kernel: now: media_configs_system_init Oct 31 06:05:18 volumio kernel: now in codec_mm_module_init Oct 31 06:05:18 volumio kernel: codec_mm codec_mm: assigned reserved memory node linux,secure_vdec_reserved Oct 31 06:05:18 volumio kernel: [tee]: tee_pta_invoke_cmd invoke func failed, cmd = 0, ret= 0, res = 0xffff0006, origin = 0x4 Oct 31 06:05:18 volumio kernel: [mmc]: tuning-c:1, tuning-s:5 Oct 31 06:05:18 volumio kernel: codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma Oct 31 06:05:18 volumio kernel: [mmc]: mmc0: clk= 0x10000206, adj = 0x12000, dly1 = 0, dly2 = 0 Oct 31 06:05:18 volumio kernel: [mmc]: aml_sd_emmc_clktest [844] clktest : 10752, delay_cell: 59, count: 42 Oct 31 06:05:18 volumio kernel: codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma Oct 31 06:05:18 volumio kernel: [mmc]: [set_emmc_nwr_clks], delay1: 0xc30c30c, delay2: 0x30c30c Oct 31 06:05:18 volumio kernel: codec_mm_probe ok Oct 31 06:05:18 volumio kernel: resman: amresource_mgr init success Oct 31 06:05:18 volumio kernel: Codec io: codec_io_probe success, cpu_type=0x36 Oct 31 06:05:18 volumio kernel: vclk: aml_vclk_probe OK Oct 31 06:05:18 volumio kernel: vout_meas_ctrl_init_dft: vdin_meas_clk 50000000HZ Oct 31 06:05:18 volumio kernel: vout_mux_probe OK Oct 31 06:05:18 volumio kernel: vrr: [0]: driver version: 20231218 fix vrr line delay issue(0-t7) Oct 31 06:05:18 volumio kernel: vrr: [0]: vrr_cdev_add OK Oct 31 06:05:18 volumio kernel: vrr: [0]: vrr_config_load: line_delay: 600 Oct 31 06:05:18 volumio kernel: vrr: [0]: vrr_probe ok, init_state:0x1 Oct 31 06:05:18 volumio kernel: vrr: [1]: driver version: 20231218 fix vrr line delay issue(0-t7) Oct 31 06:05:18 volumio kernel: vrr: [1]: vrr_cdev_add OK Oct 31 06:05:18 volumio kernel: vrr: [1]: vrr_config_load: line_delay: 600 Oct 31 06:05:18 volumio kernel: vrr: [1]: vrr_probe ok, init_state:0x3 Oct 31 06:05:18 volumio kernel: vrr: [2]: driver version: 20231218 fix vrr line delay issue(0-t7) Oct 31 06:05:18 volumio kernel: vrr: [2]: vrr_cdev_add OK Oct 31 06:05:18 volumio kernel: vrr: [2]: vrr_config_load: line_delay: 600 Oct 31 06:05:18 volumio kernel: vrr: [2]: vrr_probe ok, init_state:0x7 Oct 31 06:05:18 volumio kernel: Canvas: canvas_probe ok, reg=fe036048, size=2000 base =ffffffc010984048 Oct 31 06:05:18 volumio kernel: rdma: line_n_rdma_en = 0 Oct 31 06:05:18 volumio kernel: rdma: rdma_probe,cpu_type:5, ver:2, len:24,rdma_table_size:65536 Oct 31 06:05:18 volumio kernel: rdma: set_rdma_handle video rdma handle = 1. Oct 31 06:05:18 volumio kernel: [hdmitx:] Ver: 20220125 Oct 31 06:05:18 volumio kernel: [hdmitx:] get matched device Oct 31 06:05:18 volumio kernel: [hdmitx:] get pin control Oct 31 06:05:18 volumio kernel: [hdmitx:] chip_type:0 chip_name:t7 Oct 31 06:05:18 volumio kernel: [hdmitx:] hdcp_ctl_lvl[1-0] Oct 31 06:05:18 volumio kernel: [hdmitx:] not find match pwr-ctl Oct 31 06:05:18 volumio kernel: [hdmitx:] hpd irq = 96 Oct 31 06:05:18 volumio kernel: [hdmitx:] vrr vsync irq = 97 Oct 31 06:05:18 volumio kernel: vapb_clk failed to probe Oct 31 06:05:18 volumio kernel: vpu_clk failed to probe Oct 31 06:05:18 volumio kernel: venci_top_gate failed to probe Oct 31 06:05:18 volumio kernel: venci_0_gate failed to probe Oct 31 06:05:18 volumio kernel: venci_1_gate failed to probe Oct 31 06:05:18 volumio kernel: [mmc]: cmd-best-c:27, cmd-best-size:33 Oct 31 06:05:18 volumio kernel: [hdmitx:] hdmitx21_meson_init711 Oct 31 06:05:18 volumio kernel: [hdmitx:] hdmi_hwp_init490 Oct 31 06:05:18 volumio kernel: [hdmitx:] uboot already enabled hdmitx Oct 31 06:05:18 volumio kernel: [hdmitx:] audio state: AUDIO_UNMUTE Oct 31 06:05:18 volumio kernel: [hdmitx:] hdmitx_common_init_bootup_format_para init ok Oct 31 06:05:18 volumio kernel: [hdmitx:] hdmitx21_uboot_audio_en[584] data = 0x3 Oct 31 06:05:18 volumio kernel: [hdmitx:] hdmitx21_audio_mute_op: AUD_UNMUTE path=0x0 Oct 31 06:05:18 volumio kernel: [hdmitx:] audio state: AUDIO_UNMUTE Oct 31 06:05:18 volumio kernel: Error getting FEAT_DISABLE_HDMI_TX_3D: 101 Oct 31 06:05:18 volumio kernel: Error getting FEAT_DISABLE_HDMITX: 101 Oct 31 06:05:18 volumio kernel: [hdmitx:] plugin sequence id: 4294892866 Oct 31 06:05:18 volumio kernel: [hdmitx:] edid: blk0 raw data Oct 31 06:05:18 volumio kernel: [hdmitx:] 00ffffffffffff0005e30000010101010018010380462778022505a357509f270c505421080001010101010101010101010101010101023a801871382d40582c 4500ba892100001e662150b051001b3040703600ba892100001e000000fc00414f432054560a202020202020000000fd00313d0f450f000a20202020202001b8 Oct 31 06:05:18 volumio kernel: [hdmitx:] edid: blk1 raw data Oct 31 06:05:18 volumio kernel: [hdmitx:] 020326715001020304050607901112131415161f20260907071507508301000065030c001000011d8018711c1620582c2500ba892100009e011d007251d01e20 6e285500ba892100001e8c0aa02051201810187e2300ba89210000989e20009051201f3048803600ba892100001c000000000000000000000000000000000053 Oct 31 06:05:18 volumio kernel: [hdmitx:] set audio Oct 31 06:05:18 volumio kernel: [hdmitx:] audio_param->chs = 1 Oct 31 06:05:18 volumio kernel: [hdmitx:] aud_src_if = 0 Oct 31 06:05:18 volumio kernel: [hdmitx:] aud_n_para = 5824 Oct 31 06:05:18 volumio kernel: [hdmitx:] audio state: AUDIO_UNMUTE Oct 31 06:05:18 volumio kernel: bl: chip type: (9-t7) Oct 31 06:05:18 volumio kernel: bl: [0]: key_valid: 0 Oct 31 06:05:18 volumio kernel: bl: [0]: probe OK, init_state:0x1 Oct 31 06:05:18 volumio kernel: bl: [0]: bl_config_load from dts Oct 31 06:05:18 volumio kernel: bl: [0]: aml_bl_config_probe_work: failed Oct 31 06:05:18 volumio kernel: dummy_venc_probe OK Oct 31 06:05:18 volumio kernel: vout: error: aml_vout_get_dt_info: can't get vsync irq Oct 31 06:05:18 volumio kernel: vrr: [2]: aml_vrr_register_device: hdmitx_vrr 0 successfully Oct 31 06:05:18 volumio kernel: [hdmitx:] hdmitx_register_vrr ret = 0 Oct 31 06:05:18 volumio kernel: [hdmitx:] already display in uboot Oct 31 06:05:18 volumio kernel: [hdmitx:] vinfo: set cur_enc_ppc as 1, vpp color: 0 Oct 31 06:05:18 volumio kernel: vout: init mode 1080p60hz set ok Oct 31 06:05:18 volumio kernel: vout: aml_vout_probe OK Oct 31 06:05:18 volumio kernel: vout: vout2: init mode null set ok Oct 31 06:05:18 volumio kernel: vout: vout2: aml_vout2_probe OK Oct 31 06:05:18 volumio kernel: vout: vout3: init mode null set ok Oct 31 06:05:18 volumio kernel: vout: vout3: aml_vout3_probe OK Oct 31 06:05:18 volumio kernel: vpu_security_probe ok. Oct 31 06:05:18 volumio kernel: ion_dev: __meson_ion_add_heap,heap->name=codec_mm_cma heap->id=2 Oct 31 06:05:18 volumio kernel: dmaheap: find heap-gfx Oct 31 06:05:18 volumio kernel: amlogic_heap_secure_dma_buf_init: heap-secure not added in dts. Oct 31 06:05:18 volumio kernel: aml_media: ge2d init clock is 667000000 HZ, VPU clock is 666666656 HZ Oct 31 06:05:18 volumio kernel: aml_media: ge2d clock is 666 MHZ Oct 31 06:05:18 volumio kernel: aml_media: map io source 0x00000000b9481940,size=256 to 0x0000000085875f23 Oct 31 06:05:18 volumio kernel: ge2d ff040000.ge2d: assigned reserved memory node linux,ge2d_cma Oct 31 06:05:18 volumio kernel: aml_media: ge2d workqueue monitor start Oct 31 06:05:18 volumio kernel: [freertos]: rtos_reserved device node find error Oct 31 06:05:18 volumio kernel: vdin_drv_init: major 484 ver:2023/07/20 Oct 31 06:05:18 volumio kernel: don't find vdin_export_id. Oct 31 06:05:18 volumio kernel: chip:vdin-t7 hw_ver:8 Oct 31 06:05:18 volumio kernel: vdin(0) dma mask Oct 31 06:05:18 volumio kernel: vdin0-irq=111 Oct 31 06:05:18 volumio kernel: vpu_crash_int=-61 Oct 31 06:05:18 volumio kernel: vdin_get_irq_from_dts vdin0_wr_done=-61 Oct 31 06:05:18 volumio kernel: meta_wr_done_int=112 Oct 31 06:05:18 volumio kernel: vdin_drv_probe: fclk_div5 is 399 MHZ Oct 31 06:05:18 volumio kernel: vdin_drv_probe: vdin[0] clock is 50 MHZ Oct 31 06:05:18 volumio kernel: vdin_drv_probe: driver initialized ok Oct 31 06:05:18 volumio kernel: don't find vdin_export_id. Oct 31 06:05:18 volumio kernel: vdin vdin1: assigned reserved memory node linux,vdin1_cma Oct 31 06:05:18 volumio kernel: chip:vdin-t7 hw_ver:8 Oct 31 06:05:18 volumio kernel: vdin(1) dma mask Oct 31 06:05:18 volumio kernel: vdin1-irq=113 Oct 31 06:05:18 volumio kernel: vdin_get_irq_from_dts vdin1_wr_done=-61 Oct 31 06:05:18 volumio kernel: video4linux video71: assigned reserved memory node linux,vdin1_cma Oct 31 06:05:18 volumio kernel: vdin1 get fclk_div5 err Oct 31 06:05:18 volumio kernel: vdin_drv_probe: vdin1 cannot get msr clk !!! Oct 31 06:05:18 volumio kernel: vdin_debugfs_init only support debug vdin0 1 Oct 31 06:05:18 volumio kernel: vdin_drv_probe: driver initialized ok Oct 31 06:05:18 volumio kernel: vdin_drv_init: vdin driver init done Oct 31 06:05:18 volumio kernel: secure_register module=1 ok Oct 31 06:05:18 volumio kernel: amvideom vsync irq: 97 Oct 31 06:05:18 volumio kernel: amvideom vsync viu2 irq: 114 Oct 31 06:05:18 volumio kernel: rdma: set_rdma_handle video rdma handle = 4. Oct 31 06:05:18 volumio kernel: amvideom vsync viu3 irq: 115 Oct 31 06:05:18 volumio kernel: create_ge2d_work_queue video task ok Oct 31 06:05:18 volumio kernel: create amvideo_poll attribute (null) fail Oct 31 06:05:18 volumio kernel: PPMGRDRV: info: ppmgr_dev major:482 Oct 31 06:05:18 volumio kernel: ppmgr driver probe: irq:0 Oct 31 06:05:18 volumio kernel: ppmgr: probe of ppmgr failed with error -22 Oct 31 06:05:18 volumio kernel: aml_media: picdec_driver_probe reserved_mem is not used. Oct 31 06:05:18 volumio kernel: amdolby_vision_init:module init Oct 31 06:05:18 volumio kernel: amdolby_vision probe start & ver: 20240205 Oct 31 06:05:18 volumio kernel: cpu_id=6 tvmode=0, enable multi_core1 0 Oct 31 06:05:18 volumio kernel: amdv_init_receiver(dvel) Oct 31 06:05:18 volumio kernel: amdv_init_receiver: dvel Oct 31 06:05:18 volumio kernel: get dma_vaddr ffffffc010ac6000 0x0000000000680000 Oct 31 06:05:18 volumio kernel: dovi disable in uboot Oct 31 06:05:18 volumio kernel: new arch is :1. Oct 31 06:05:18 volumio kernel: [tsync_pcr_init]init success. Oct 31 06:05:18 volumio kernel: video_composer_module_init_1 Oct 31 06:05:18 volumio kernel: videotunnel init Oct 31 06:05:18 volumio kernel: videoqueue_init___1 Oct 31 06:05:18 volumio kernel: aml_vecm_init:module init_20240402-0 Oct 31 06:05:18 volumio kernel: vecm chip id: 1, chip_cls : 3 Oct 31 06:05:18 volumio kernel: no support res_lc_curve_irq Oct 31 06:05:18 volumio kernel: ionvideo-000: V4L2 device registered as video13 Oct 31 06:05:18 volumio kernel: ionvideo-008: V4L2 device registered as video21 Oct 31 06:05:18 volumio kernel: v4lvideo-000: V4L2 device registered as video30 Oct 31 06:05:18 volumio kernel: v4lvideo-008: V4L2 device registered as video38 Oct 31 06:05:18 volumio kernel: no match support_4k for amlvideo2.0, disable as default Oct 31 06:05:18 volumio kernel: don't find codec_mm_alloc, use default parm. Oct 31 06:05:18 volumio kernel: no match support_4k for amlvideo2.1, disable as default Oct 31 06:05:18 volumio kernel: don't find codec_mm_alloc, use default parm. Oct 31 06:05:18 volumio kernel: dil:dil_init. Oct 31 06:05:18 volumio kernel: di_multi multi-di: IRQ aisr_irq not found Oct 31 06:05:18 volumio kernel: dim:cvs inp:0xf1~0xf2~0xf3. Oct 31 06:05:18 volumio kernel: . Oct 31 06:05:18 volumio kernel: . Oct 31 06:05:18 volumio kernel: dim:dim_probe:ok Oct 31 06:05:18 volumio kernel: input: cec_input as /devices/virtual/input/input4 Oct 31 06:05:18 volumio kernel: cec: share pin mux to b Oct 31 06:05:18 volumio kernel: gdc: gdc_platform_probe: reserve_mem is not used Oct 31 06:05:18 volumio kernel: gdc: init_gdc_io: reg base = 0000000055b1c8bc Oct 31 06:05:18 volumio kernel: gdc: init_gdc_io: ext_8g_msb base = 00000000c897aa9f Oct 31 06:05:18 volumio kernel: [hdmitx:] hdr_work_func: send zero DRM Oct 31 06:05:18 volumio kernel: gdc: gdc_platform_probe: clk_gate clk_gate is 799 MHZ Oct 31 06:05:18 volumio kernel: [freertos]: rtos_reserved device node find error Oct 31 06:05:18 volumio kernel: gdc: gdc_wq_init: init gdc device Oct 31 06:05:18 volumio kernel: gdc: gdc_start_monitor: gdc start monitor Oct 31 06:05:18 volumio kernel: gdc: gdc_monitor_thread: gdc workqueue monitor start Oct 31 06:05:18 volumio kernel: gdc: gdc_platform_probe: reserve_mem is not used Oct 31 06:05:18 volumio kernel: gdc: init_gdc_io: reg base = 00000000f06fcd2f Oct 31 06:05:18 volumio kernel: gdc: gdc_platform_probe: clk_gate clk_gate is 799 MHZ Oct 31 06:05:18 volumio kernel: [freertos]: rtos_reserved device node find error Oct 31 06:05:18 volumio kernel: amvdec_csi module: init. Oct 31 06:05:18 volumio kernel: amvdec_csi_init_module:major 476 Oct 31 06:05:18 volumio kernel: amvdec_csi module: init. ok Oct 31 06:05:18 volumio kernel: [RX]-chip id:9 Oct 31 06:05:18 volumio kernel: [RX]-phy ver:4 Oct 31 06:05:18 volumio kernel: [RX]-missing memory resource Oct 31 06:05:18 volumio kernel: [RX]-failed to ioremap Oct 31 06:05:18 volumio kernel: [RX]-hdevp irq: 0, 122 Oct 31 06:05:18 volumio kernel: [RX]-rx_init_irq: can't get irq resource Oct 31 06:05:18 volumio kernel: [RX]-get fclk_div3_clk err Oct 31 06:05:18 volumio kernel: [RX]-get fclk_div7_clk err Oct 31 06:05:18 volumio kernel: [RX]-get modet_clk err Oct 31 06:05:18 volumio kernel: [RX]-get cts axi clk err Oct 31 06:05:18 volumio kernel: [RX]-term_lvl not found. Oct 31 06:05:18 volumio kernel: [RX]-warning: no rev cmd mem Oct 31 06:05:18 volumio kernel: [RX]-rx_emp_to_ddr_init Oct 31 06:05:18 volumio kernel: [RX]-port-0 edid err! Oct 31 06:05:18 volumio kernel: [RX]-update EDID from HDMITX Oct 31 06:05:18 volumio kernel: [RX]-func-4 Oct 31 06:05:18 volumio kernel: [RX]-rx_set_port_hpd, port:0, val:0 Oct 31 06:05:18 volumio kernel: [RX]-port-0 edid err! Oct 31 06:05:18 volumio kernel: [RX]-hdmirx_hw_config port:0 Oct 31 06:05:18 volumio kernel: [RX]-force_fsm_init Oct 31 06:05:18 volumio kernel: input: input_hdmirx as /devices/virtual/input/input5 Oct 31 06:05:18 volumio kernel: [mmc]: ds_sht:23, window:15, intf3:0x417008, clock:0x10100003, adjust:0x0 Oct 31 06:05:18 volumio kernel: mmc0: new HS400 MMC card at address 0001 Oct 31 06:05:18 volumio kernel: [RX]-hdmirx: driver probe ok Oct 31 06:05:18 volumio kernel: mmcblk0: mmc0:0001 BJTD4R 29.1 GiB Oct 31 06:05:18 volumio kernel: mmcblk0: p1 p2 p3 Oct 31 06:05:18 volumio kernel: [viuin..]viuin_init_module viuin module init Oct 31 06:05:18 volumio kernel: mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB Oct 31 06:05:18 volumio kernel: mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB Oct 31 06:05:18 volumio kernel: [viuin..]viuin_probe probe ok. Oct 31 06:05:18 volumio kernel: [viuin..]viuin_init_module done Oct 31 06:05:18 volumio kernel: mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (508:0) Oct 31 06:05:18 volumio kernel: atv_demod: aml_atvdemod_init:OK, version:V3.10 Oct 31 06:05:18 volumio kernel: dtv_dmd:aml_dtvdemod_init ok Oct 31 06:05:18 volumio kernel: vsync_pts_inc 1501 1000/59940 Oct 31 06:05:18 volumio kernel: frc: frc_init:module init Oct 31 06:05:18 volumio kernel: secure dmaheap:enter amlogic_system_secure_dma_buf_init Oct 31 06:05:18 volumio kernel: codecmm dmaheap:enter amlogic_codec_mm_dma_buf_init Oct 31 06:05:18 volumio kernel: Can't register major for aml_msync device Oct 31 06:05:18 volumio kernel: meson-saradc fe026000.saradc: supply vref not found, using dummy regulator Oct 31 06:05:18 volumio kernel: meson-tsensor fe020000.a73_tsensor: Does not support reset func.. Oct 31 06:05:18 volumio kernel: [thermal]: trim info = 96000119 Oct 31 06:05:18 volumio kernel: [thermal]: r1p1_tsensor_read valid cnt is 0, tvalue:0 Oct 31 06:05:18 volumio kernel: cec: wakeup_reason:0x0 Oct 31 06:05:18 volumio kernel: meson-tsensor fe022000.a53_tsensor: Does not support reset func.. Oct 31 06:05:18 volumio kernel: [thermal]: trim info = 96000153 Oct 31 06:05:18 volumio kernel: [thermal]: r1p1_tsensor_read valid cnt is 0, tvalue:0 Oct 31 06:05:18 volumio kernel: meson-tsensor fe094000.gpu_tsensor: Does not support reset func.. Oct 31 06:05:18 volumio kernel: [thermal]: trim info = 96000138 Oct 31 06:05:18 volumio kernel: [thermal]: r1p1_tsensor_read valid cnt is 0, tvalue:0 Oct 31 06:05:18 volumio kernel: cec: wakeup_data: 0x0 0x0 Oct 31 06:05:18 volumio kernel: meson-tsensor fe096000.nna_tsensor: Does not support reset func.. Oct 31 06:05:18 volumio kernel: [thermal]: trim info = 96000144 Oct 31 06:05:18 volumio kernel: [thermal]: r1p1_tsensor_read valid cnt is 0, tvalue:0 Oct 31 06:05:18 volumio kernel: meson-tsensor fe09a000.hevc_tsensor: Does not support reset func.. Oct 31 06:05:18 volumio kernel: [thermal]: trim info = 96000158 Oct 31 06:05:18 volumio kernel: [thermal]: r1p1_tsensor_read valid cnt is 0, tvalue:0 Oct 31 06:05:18 volumio kernel: meson-tsensor fe098000.vpu_tsensor: Does not support reset func.. Oct 31 06:05:18 volumio kernel: [thermal]: trim info = 96000138 Oct 31 06:05:18 volumio kernel: [thermal]: r1p1_tsensor_read valid cnt is 0, tvalue:0 Oct 31 06:05:18 volumio kernel: [mmc]: emmc key: emmc_key_init:522 ok. Oct 31 06:05:18 volumio kernel: [mmc]: emmc_key_read:566, read ok Oct 31 06:05:18 volumio kernel: [efuse-unifykey]: mark is not found Oct 31 06:05:18 volumio kernel: [efuse-unifykey]: attach success! Oct 31 06:05:18 volumio kernel: [mmc]: amlmmc_dtb_init: register dtb chardev OK Oct 31 06:05:18 volumio kernel: [thermal]: thermal: register cpucore failed Oct 31 06:05:18 volumio kernel: [thermal]: thermal: register cpucore failed Oct 31 06:05:18 volumio kernel: [thermal]: meson_cdev one or more cooldev register fail Oct 31 06:05:18 volumio kernel: [usb]: ### usb_main_init() start Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_new_c2_usb2_v2_driver_init() ret=-1 Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_new_c2_usb3_v2_driver_init() ret=-1 Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_new_usb3_v3_driver_init() success Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_cc_driver_init() ret=-1 Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_bc_driver_init() ret=-1 Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_new_usb2_v2_driver_init() success Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_new_usb3_v2_driver_init() success Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_usb2_m31_drv_init() success Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_usb3_m31_drv_init() success Oct 31 06:05:18 volumio kernel: [usb]: call aml_xhci_hcd_init() success Oct 31 06:05:18 volumio kernel: [usb]: call aml_xhci_plat_init() success Oct 31 06:05:18 volumio kernel: [usb]: call aml_dwc3_init() success Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_crg_init() success Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_new_otg_driver_init() success Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb2 fe03a000.crgphy20: USB2 phy probe:phy_mem:0xfe03a000, iomap phy_base:0xffffffc010bb5000 Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb2 fe03a000.crgphy20: Not usb-phy-trim-reg Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb2 fe03a020.crgphy21: USB2 phy probe:phy_mem:0xfe03a020, iomap phy_base:0xffffffc010d1d020 Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb2 fe03a020.crgphy21: Not usb-phy-trim-reg Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_crg_drd_usb2_drv_init() success Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb3 fe03a080.crg3phy21: This phy has no usb port Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb3 fe03a080.crg3phy21: USB3 phy probe:phy_mem:0xfe03a080, iomap phy_base:0xffffffc010d35080 Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb3 fe03a080.crg3phy20: USB3 phy probe:phy_mem:0xfe03a080, iomap phy_base:0xffffffc010d45080 Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb3 fe03a080.crg3phy20: pcie_refpll is not 100M, it is 0 Oct 31 06:05:18 volumio kernel: [usb]: call amlogic_crg_drd_usb3_drv_init() success Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb2 fe03a000.crgphy20: Not usb-phy-trim-reg Oct 31 06:05:18 volumio kernel: crg_drd fde00000.crg3drd: IRQ host not found Oct 31 06:05:18 volumio kernel: crg_drd fde00000.crg3drd: IRQ crg_usb3 not found Oct 31 06:05:18 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: meson-quirks=0x94186--- Oct 31 06:05:18 volumio kernel: amlogic-crg-drd-usb2 fe03a000.crgphy20: Not usb-phy-trim-reg Oct 31 06:05:18 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: xHCI Host Controller Oct 31 06:05:18 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: new USB bus registered, assigned bus number 1 Oct 31 06:05:18 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: hcc params 0x08000f80 hci version 0x110 quirks 0x0000600020810090 Oct 31 06:05:18 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: irq 37, io mem 0xfde00000 Oct 31 06:05:19 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: xHCI Host Controller Oct 31 06:05:19 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: new USB bus registered, assigned bus number 2 Oct 31 06:05:19 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: Host supports USB 3.1 Enhanced SuperSpeed Oct 31 06:05:19 volumio kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 Oct 31 06:05:19 volumio kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 31 06:05:19 volumio kernel: usb usb1: Product: xHCI Host Controller Oct 31 06:05:19 volumio kernel: usb usb1: Manufacturer: Linux 5.15.137 xhci-hcd Oct 31 06:05:19 volumio kernel: usb usb1: SerialNumber: xhci-hcd-meson.0.auto Oct 31 06:05:19 volumio kernel: [usb]: xHCI aml_xhci_add_endpoint called for root hub Oct 31 06:05:19 volumio kernel: [usb]: xHCI aml_xhci_check_bandwidth called for root hub Oct 31 06:05:19 volumio kernel: hub 1-0:1.0: USB hub found Oct 31 06:05:19 volumio kernel: hub 1-0:1.0: 1 port detected Oct 31 06:05:19 volumio kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. Oct 31 06:05:19 volumio kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 Oct 31 06:05:19 volumio kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 31 06:05:19 volumio kernel: usb usb2: Product: xHCI Host Controller Oct 31 06:05:19 volumio kernel: usb usb2: Manufacturer: Linux 5.15.137 xhci-hcd Oct 31 06:05:19 volumio kernel: usb usb2: SerialNumber: xhci-hcd-meson.0.auto Oct 31 06:05:19 volumio kernel: [usb]: xHCI aml_xhci_add_endpoint called for root hub Oct 31 06:05:19 volumio kernel: [usb]: xHCI aml_xhci_check_bandwidth called for root hub Oct 31 06:05:19 volumio kernel: hub 2-0:1.0: USB hub found Oct 31 06:05:19 volumio kernel: hub 2-0:1.0: 1 port detected Oct 31 06:05:19 volumio kernel: [usb]: call amlogic_crg_host_driver_init() success Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg20otg@fe03a000: controller_type is 2 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg20otg@fe03a000: crg_force_device_mode is 1 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg20otg@fe03a000: otg is 0 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg20otg@fe03a000: udc_name: fdd00000.crgudc2 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg20otg@fe03a000: phy2_mem:0xfe03a000, iomap phy2_base:0xffffffc010e3d000 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg20otg@fe03a000: phy3_mem:0xfe03a080, iomap phy3_base:0xffffffc010e3f080 Oct 31 06:05:19 volumio kernel: [usb]: crg gadget init Oct 31 06:05:19 volumio kernel: amlogic-crg-drd-usb2 fe03a020.crgphy21: Not usb-phy-trim-reg Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg21otg@fe03a020: controller_type is 2 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg21otg@fe03a020: crg_force_device_mode is 1 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg21otg@fe03a020: otg is 0 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg21otg@fe03a020: udc_name: fdd00000.crgudc2 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg21otg@fe03a020: phy2_mem:0xfe03a020, iomap phy2_base:0xffffffc010e4b020 Oct 31 06:05:19 volumio kernel: amlogic-crg-otg soc:crg21otg@fe03a020: phy3_mem:0xfe03a080, iomap phy3_base:0xffffffc010e4d080 Oct 31 06:05:19 volumio kernel: [usb]: crg gadget init Oct 31 06:05:19 volumio kernel: [usb]: crg gadget already registered. exit Oct 31 06:05:19 volumio kernel: [usb]: call crg_otg_init() success Oct 31 06:05:19 volumio kernel: [usb]: call crg_otg_v2_init() success Oct 31 06:05:19 volumio kernel: [usb]: ### usb_main_init() end Oct 31 06:05:19 volumio kernel: [drm:meson_of_init] *ERROR* osd_axi_sel parser failed and set default 0 Oct 31 06:05:19 volumio kernel: [drm] meson_video_parse_config:vfm_mode = 1 Oct 31 06:05:19 volumio kernel: [drm] osd plane 0 create done, occupied-0 crtc_mask-0 type-1 osd_reverse-0 Oct 31 06:05:19 volumio kernel: [drm] osd plane 1 create done, occupied-0 crtc_mask-0 type-0 osd_reverse-0 Oct 31 06:05:19 volumio kernel: [drm] osd plane 2 create done, occupied-0 crtc_mask-1 type-1 osd_reverse-0 Oct 31 06:05:19 volumio kernel: [drm] osd plane 3 create done, occupied-0 crtc_mask-2 type-1 osd_reverse-0 Oct 31 06:05:19 volumio kernel: [drm] video plane 0 create done Oct 31 06:05:19 volumio kernel: [drm] video plane 1 create done Oct 31 06:05:19 volumio kernel: [drm] video plane 2 create done Oct 31 06:05:19 volumio kernel: [drm] meson_vpu_reg_handle_register, vpp0-5 Oct 31 06:05:19 volumio kernel: [drm] skip gamma init Oct 31 06:05:19 volumio kernel: [drm] meson_vpu_reg_handle_register, vpp1-6 Oct 31 06:05:19 volumio kernel: [drm] skip gamma init Oct 31 06:05:19 volumio kernel: [drm] meson_vpu_reg_handle_register, vpp2-7 Oct 31 06:05:19 volumio kernel: [drm] skip gamma init Oct 31 06:05:19 volumio kernel: secure_register module=0 ok Oct 31 06:05:19 volumio kernel: secure_register module=0 ok Oct 31 06:05:19 volumio kernel: secure_register module=0 ok Oct 31 06:05:19 volumio kernel: secure_register module=0 ok Oct 31 06:05:19 volumio kernel: [drm] video_hw_init:vfm_mode = 1 Oct 31 06:05:19 volumio kernel: [drm] video_hw_init:vfm_mode = 1 Oct 31 06:05:19 volumio kernel: [drm] video_hw_init:vfm_mode = 1 Oct 31 06:05:19 volumio kernel: meson drm-subsystem: bound ff900000.drm-vpu (ops am_meson_vpu_component_ops) Oct 31 06:05:19 volumio kernel: [hdmitx:] *ERROR* meson_hdmitx_bind hdmi [0] Oct 31 06:05:19 volumio kernel: meson drm-subsystem: bound ff000000.amhdmitx (ops meson_hdmitx_bind_ops) Oct 31 06:05:19 volumio kernel: [drm] [meson_dummyl_dev_bind]-[185] dummy from hdmitx, skip register dummyl connector. Oct 31 06:05:19 volumio kernel: meson_dummyl_bind dummyl[0] Oct 31 06:05:19 volumio kernel: meson drm-subsystem: bound dummy_venc (ops meson_dummyl_bind_ops) Oct 31 06:05:19 volumio kernel: [drm] logo_skip = 0 Oct 31 06:05:19 volumio kernel: [drm] allocate reserved mem Oct 31 06:05:19 volumio kernel: [drm] of read reservememsize=0x800000--0x3f800000 Oct 31 06:05:19 volumio kernel: [drm] logo0 width=1920,height=1080,start_addr=0x0x000000003f800000,size=8388608 Oct 31 06:05:19 volumio kernel: [hdmitx:] drm_hdmitx_get_vrr_cap not support vrr Oct 31 06:05:19 volumio kernel: [drm] Found Connector[11] mode[1080p60hz] Oct 31 06:05:19 volumio kernel: [drm:meson_hdmitx_atomic_check] *ERROR* hdmitx_on changed, force modeset. Oct 31 06:05:19 volumio kernel: [drm] meson_hdmitx_choose_preset_mode validate vmode 1080p60hz, 0 Oct 31 06:05:19 volumio kernel: [drm] meson_hdmitx_choose_preset_mode update 1080p60hz expect 0 Oct 31 06:05:19 volumio kernel: [drm] meson_hdmitx_encoder_atomic_mode_set enter:attr[2-8] Oct 31 06:05:19 volumio kernel: [drm] hdmitx hdr eotf check fail [-19] Oct 31 06:05:19 volumio kernel: [hdmitx:] *ERROR* hdmitx_common_validate_mode_locked: state_sequence_id failed: 0 Oct 31 06:05:19 volumio kernel: [hdmitx:] *ERROR* hdmitx_common_validate_mode_locked: state_sequence_id failed: 0 Oct 31 06:05:19 volumio kernel: [hdmitx:] *ERROR* hdmitx_common_validate_mode_locked: state_sequence_id failed: 0 Oct 31 06:05:19 volumio kernel: [hdmitx:] *ERROR* hdmitx_common_validate_mode_locked: state_sequence_id failed: 0 Oct 31 06:05:19 volumio kernel: [hdmitx:] *ERROR* hdmitx_common_validate_mode_locked: state_sequence_id failed: 0 Oct 31 06:05:19 volumio kernel: [hdmitx:] *ERROR* hdmitx_common_validate_mode_locked: state_sequence_id failed: 0 Oct 31 06:05:19 volumio kernel: [drm] meson_hdmitx_decide_color_attr no attr found, reset to 444,8bit. Oct 31 06:05:19 volumio kernel: [drm] am_meson_crtc_atomic_enable-[0] in: new[1080p60hz], old[], vmode[0-0], uboot[1] Oct 31 06:05:19 volumio kernel: [drm] am_meson_crtc_atomic_enable-[0]: enable mode 1080p60hz final vmode 0 Oct 31 06:05:19 volumio kernel: vlock: event MODE_CHANGE_PRE 0 Oct 31 06:05:19 volumio kernel: [hdmitx:] skip real mode setting for uboot init Oct 31 06:05:19 volumio kernel: DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE Oct 31 06:05:19 volumio kernel: vlock: event MODE_CHANGE Oct 31 06:05:19 volumio kernel: vsync_pts_inc 1500 1/60 Oct 31 06:05:19 volumio kernel: [drm] meson_vout_update_mode_name: hdmitx update vout 1 name 1080p60hz. Oct 31 06:05:19 volumio kernel: [drm] meson_hdmitx_get_hdcp_request usr_type: 3, hdcp cap: 0,0 Oct 31 06:05:19 volumio kernel: [drm] [meson_hdmitx_get_hdcp_request]: TX no hdcp key Oct 31 06:05:19 volumio kernel: [drm:meson_hdmitx_update_hdcp] *ERROR* meet stopped hdcp stat Oct 31 06:05:19 volumio kernel: [drm:meson_hdmitx_update_hdcp] *ERROR* No valid hdcp mode exit, maybe hdcp havenot init. Oct 31 06:05:19 volumio kernel: [drm] am_meson_drm_fbdev_init in Oct 31 06:05:19 volumio kernel: [hdmitx:] drm_hdmitx_get_vrr_cap not support vrr Oct 31 06:05:19 volumio kernel: [drm] mode_cmd.width = 1920 Oct 31 06:05:19 volumio kernel: [drm] mode_cmd.height = 2160 Oct 31 06:05:19 volumio kernel: [drm] mode_cmd.pixel_format = 875713089-875713089 Oct 31 06:05:19 volumio kernel: [drm] am_meson_drm_fbdev_modeset_create in, plane_index = 0, crtc_id = 0 Oct 31 06:05:19 volumio kernel: [drm] am_meson_drm_fb_helper_set_par IN Oct 31 06:05:19 volumio kernel: [drm] fb_set_par: am_meson_drm_fb_helper_set_par OUT Oct 31 06:05:19 volumio kernel: [drm:meson_osd_plane_async_check] *ERROR* osd0 plane info changed Oct 31 06:05:19 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: aml_xhci_alloc_dev, slot=1 Oct 31 06:05:19 volumio kernel: free_reserved_mem 295 logo start_addr=3f800000, end=40000000 Oct 31 06:05:19 volumio kernel: [memory-debug]: Freeing fb-memory memory: 8192K Oct 31 06:05:19 volumio kernel: [drm] am_meson_free_logo_memory, free none_cma memory: addr:0x0x000000003f800000,size:0x800000 Oct 31 06:05:19 volumio kernel: Console: switching to colour frame buffer device 240x67 Oct 31 06:05:19 volumio kernel: meson drm-subsystem: [drm] fb0: mesondrmfb frame buffer device Oct 31 06:05:19 volumio kernel: [drm] create fbdev success. Oct 31 06:05:19 volumio kernel: [drm] create fbdev for primary plane [000000000970e30f] Oct 31 06:05:19 volumio kernel: [hdmitx:] drm_hdmitx_get_vrr_cap not support vrr Oct 31 06:05:19 volumio kernel: [drm] mode_cmd.width = 1920 Oct 31 06:05:19 volumio kernel: [drm] mode_cmd.height = 2160 Oct 31 06:05:19 volumio kernel: [drm] mode_cmd.pixel_format = 875713089-875713089 Oct 31 06:05:19 volumio kernel: [drm] am_meson_drm_fbdev_modeset_create in, plane_index = 1, crtc_id = 0 Oct 31 06:05:19 volumio kernel: meson drm-subsystem: [drm] fb1: mesondrmfb frame buffer device Oct 31 06:05:19 volumio kernel: [drm] create fbdev success. Oct 31 06:05:19 volumio kernel: [drm] create fbdev for plane (1 1) zorder=1 Oct 31 06:05:19 volumio kernel: [drm] am_meson_drm_fbdev_init create 1 out Oct 31 06:05:19 volumio kernel: [drm] Initialized meson 2.0.0 20220603 for drm-subsystem on minor 0 Oct 31 06:05:19 volumio kernel: g12a-mdio_mux fe028000.mdio-multiplexer: wzh failed to get ethrmii clock Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: host bridge /soc/pcie@f5000000 ranges: Oct 31 06:05:19 volumio kernel: slab_trace_module_init, create slabtrace failed Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: IO 0x00f5600000..0x00f56fffff -> 0x0000000000 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: MEM 0x00f5700000..0x00f6ffffff -> 0x00f5700000 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: GPIO normal: assert reset Oct 31 06:05:19 volumio kernel: mix_mod_init, ret:0 Oct 31 06:05:19 volumio kernel: created 512K log 'log_main' Oct 31 06:05:19 volumio kernel: created 1K log 'log_events' Oct 31 06:05:19 volumio kernel: created 1K log 'log_radio' Oct 31 06:05:19 volumio kernel: created 16K log 'log_system' Oct 31 06:05:19 volumio kernel: NET: Registered PF_INET6 protocol family Oct 31 06:05:19 volumio kernel: modprobe (158) used greatest stack depth: 12992 bytes left Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: iATU unroll: enabled Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: Detected iATU regions: 4 outbound, 4 inbound Oct 31 06:05:19 volumio kernel: Segment Routing with IPv6 Oct 31 06:05:19 volumio kernel: In-situ OAM (IOAM) with IPv6 Oct 31 06:05:19 volumio kernel: NET: Registered PF_PACKET protocol family Oct 31 06:05:19 volumio kernel: Bluetooth: RFCOMM TTY layer initialized Oct 31 06:05:19 volumio kernel: Bluetooth: RFCOMM socket layer initialized Oct 31 06:05:19 volumio kernel: Bluetooth: RFCOMM ver 1.11 Oct 31 06:05:19 volumio kernel: Key type dns_resolver registered Oct 31 06:05:19 volumio kernel: registered taskstats version 1 Oct 31 06:05:19 volumio kernel: Loading compiled-in X.509 certificates Oct 31 06:05:19 volumio kernel: Loaded X.509 cert 'Build time autogenerated kernel key: c467e611d6add29d0632260da549fd63c12b2c3a' Oct 31 06:05:19 volumio kernel: page_owner is disabled Oct 31 06:05:19 volumio kernel: Key type .fscrypt registered Oct 31 06:05:19 volumio kernel: Key type fscrypt-provisioning registered Oct 31 06:05:19 volumio kernel: Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=yes Oct 31 06:05:19 volumio kernel: pstore: Using crash dump compression: deflate Oct 31 06:05:19 volumio kernel: usb 1-1: new high-speed USB device number 2 using xhci-hcd-meson Oct 31 06:05:19 volumio kernel: usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 Oct 31 06:05:19 volumio kernel: usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 31 06:05:19 volumio kernel: usb 1-1: Product: USB 2.0 Hub Oct 31 06:05:19 volumio kernel: hub 1-1:1.0: USB hub found Oct 31 06:05:19 volumio kernel: hub 1-1:1.0: 4 ports detected Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x1 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: Error: Wait linkup timeout. Pls check pcie device Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: PHY DEBUG_R0=0x00519f00 DEBUG_R1=0x08200000 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: Add PCIe port failed, -110 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2: probe of f5000000.pcie failed with error -110 Oct 31 06:05:19 volumio kernel: dw-pcie f5000000.pcie: IRQ index 1 not found Oct 31 06:05:19 volumio kernel: [pwm_regulator_init_state] Get return < i-1:3 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: host bridge /soc/pcie@f5000000 ranges: Oct 31 06:05:19 volumio kernel: vddcpua: supplied by regulator-dummy Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: IO 0x00f5600000..0x00f56fffff -> 0x0000000000 Oct 31 06:05:19 volumio kernel: [pwm_regulator_init_state] Get return < i-1:3 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: MEM 0x00f5700000..0x00f6ffffff -> 0x00f5700000 Oct 31 06:05:19 volumio kernel: vddcpub: supplied by regulator-dummy Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: GPIO normal: assert reset Oct 31 06:05:19 volumio kernel: [pwm_regulator_init_state] Get return == i: 6 Oct 31 06:05:19 volumio kernel: vddnpu: supplied by regulator-dummy Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: IRQ eth_wake_irq not found Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: iATU unroll: enabled Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: IRQ eth_lpi not found Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: Detected iATU regions: 4 outbound, 4 inbound Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Cannot get pipe line clock Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Cannot get gp clock Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Cannot get gp clock Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Cannot get gp clock Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: PTP uses main clock Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: User ID: 0x12, Synopsys ID: 0x51 Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: DWMAC4/5 Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: DMA HW capability register supported Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: RX Checksum Offload Engine supported Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: TX Checksum insertion supported Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Wake-Up On Lan supported Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Enable RX Mitigation via HW Watchdog Timer Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Enabled RFS Flow TC (entries=8) Oct 31 06:05:19 volumio kernel: meson8b-dwmac fdc00000.ethernet: Using 32 bits DMA width Oct 31 06:05:19 volumio kernel: aml_cust_setting Oct 31 06:05:19 volumio kernel: cover mc_val as 0x1621 Oct 31 06:05:19 volumio kernel: input: input_ethrcu as /devices/platform/soc/fdc00000.ethernet/input/input6 Oct 31 06:05:19 volumio kernel: fe07c000.serial: ttyS1 at MMIO 0xfe07c000 (irq = 58, base_baud = 1500000) is a meson_uart Oct 31 06:05:19 volumio kernel: fe080000.serial: ttyS4 at MMIO 0xfe080000 (irq = 59, base_baud = 1500000) is a meson_uart Oct 31 06:05:19 volumio kernel: cpu cpu0: EM: created perf domain Oct 31 06:05:19 volumio kernel: cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 999999 KHz, changing to: 1000000 KHz Oct 31 06:05:19 volumio kernel: cpu cpu4: EM: created perf domain Oct 31 06:05:19 volumio kernel: adc_keypad adc_keypad: Not find mbox channel byidx Oct 31 06:05:19 volumio kernel: [input]: mbox chan is NULL Oct 31 06:05:19 volumio kernel: input: adc_keypad as /devices/platform/adc_keypad/input/input7 Oct 31 06:05:19 volumio kernel: g12a-mdio_mux fe028000.mdio-multiplexer: wzh failed to get ethrmii clock Oct 31 06:05:19 volumio kernel: [mdio-g12a]: tx_amp_addr fe010330 Oct 31 06:05:19 volumio kernel: [mdio-g12a]: txamp 0x33 Oct 31 06:05:19 volumio kernel: [mdio-g12a]: use default st_mode Oct 31 06:05:19 volumio kernel: i2c i2c-6: sensor_probe: kxtj3,00000000b15c4353 Oct 31 06:05:19 volumio kernel: sensors 6-000e: sensor_chip_init:kxtj3:devid=0x35,ops=0x000000007cf6c1a4 Oct 31 06:05:19 volumio kernel: input: gsensor as /devices/platform/soc/fe000000.apb4/fe076000.i2c/i2c-6/6-000e/input/input8 Oct 31 06:05:19 volumio kernel: sensors 6-000e: sensor_irq_init:use polling,delay=30 ms Oct 31 06:05:19 volumio kernel: sensors 6-000e: sensor_misc_device_register:miscdevice: accel Oct 31 06:05:19 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: aml_xhci_alloc_dev, slot=2 Oct 31 06:05:19 volumio kernel: sensors 6-000e: sensor_probe:initialized ok,sensor name:kxtj3,type:2,id=0 Oct 31 06:05:19 volumio kernel: ALSA device list: Oct 31 06:05:19 volumio kernel: No soundcards found. Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x1 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: ltssm_up = 0x0 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: Error: Wait linkup timeout. Pls check pcie device Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: PHY DEBUG_R0=0x00489500 DEBUG_R1=0x08200000 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2 f5000000.pcie: Add PCIe port failed, -110 Oct 31 06:05:19 volumio kernel: amlogic-pcie-v2: probe of f5000000.pcie failed with error -110 Oct 31 06:05:19 volumio kernel: Freeing unused kernel memory: 4096K Oct 31 06:05:19 volumio kernel: Run /init as init process Oct 31 06:05:19 volumio kernel: with arguments: Oct 31 06:05:19 volumio kernel: /init Oct 31 06:05:19 volumio kernel: with environment: Oct 31 06:05:19 volumio kernel: HOME=/ Oct 31 06:05:19 volumio kernel: TERM=linux Oct 31 06:05:19 volumio kernel: bootpart=UUID=EC20-43C7 Oct 31 06:05:19 volumio kernel: imgpart=UUID=4b498279-ddb6-49ce-87fc-6f935512cfbf Oct 31 06:05:19 volumio kernel: datapart=UUID=2074f9aa-465c-4f72-8941-39b708e6803f Oct 31 06:05:19 volumio kernel: imgfile=/volumio_current.sqsh Oct 31 06:05:19 volumio kernel: uuidconfig=uEnv.txt Oct 31 06:05:19 volumio kernel: hwdevice= Oct 31 06:05:19 volumio kernel: scramble_reg=0xfe02e030 Oct 31 06:05:19 volumio kernel: gamma=0 Oct 31 06:05:19 volumio kernel: khadas_board=VIM4 Oct 31 06:05:19 volumio kernel: boot_source=emmc Oct 31 06:05:19 volumio kernel: otg_device=1 Oct 31 06:05:19 volumio kernel: logo=osd0,loaded,0x3fdeec00 Oct 31 06:05:19 volumio kernel: vout=1080p60hz Oct 31 06:05:19 volumio kernel: panel_type=mipi_0 Oct 31 06:05:19 volumio kernel: hdmitx=,444,8bit Oct 31 06:05:19 volumio kernel: hdmimode=1080p60hz Oct 31 06:05:19 volumio kernel: hdmichecksum=0xb8530000 Oct 31 06:05:19 volumio kernel: hdr_force_mode= Oct 31 06:05:19 volumio kernel: dolby_status= Oct 31 06:05:19 volumio kernel: frac_rate_policy=1 Oct 31 06:05:19 volumio kernel: video_reverse=0 Oct 31 06:05:19 volumio kernel: nn_adj_vol=0 Oct 31 06:05:19 volumio kernel: powermode=on Oct 31 06:05:19 volumio kernel: lcd_ctrl=0x37000083 Oct 31 06:05:19 volumio kernel: panel1_type=vbyone_1 Oct 31 06:05:19 volumio kernel: lcd1_ctrl=0x00000000 Oct 31 06:05:19 volumio kernel: panel2_type=lvds_1 Oct 31 06:05:19 volumio kernel: lcd2_ctrl=0x00000000 Oct 31 06:05:19 volumio kernel: mac=c8:63:14:72:5f:11 Oct 31 06:05:19 volumio kernel: wol_enable=0 Oct 31 06:05:19 volumio kernel: reboot_mode=normal Oct 31 06:05:19 volumio kernel: fan=auto Oct 31 06:05:19 volumio kernel: partition_type=generic Oct 31 06:05:19 volumio kernel: usb 1-1.1: new high-speed USB device number 3 using xhci-hcd-meson Oct 31 06:05:19 volumio kernel: systemd-udevd (199) used greatest stack depth: 12912 bytes left Oct 31 06:05:19 volumio kernel: usb 1-1.1: device descriptor read/64, error -71 Oct 31 06:05:19 volumio kernel: gpu_sched: module verification failed: signature and/or required key missing - tainting kernel Oct 31 06:05:19 volumio kernel: panfrost fe400000.bifrost: clock rate = 799999988 Oct 31 06:05:19 volumio kernel: udevadm (212) used greatest stack depth: 12864 bytes left Oct 31 06:05:19 volumio kernel: panfrost fe400000.bifrost: dev_pm_opp_set_regulators: no regulator (mali) found: -19 Oct 31 06:05:19 volumio kernel: panfrost fe400000.bifrost: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 Oct 31 06:05:19 volumio kernel: panfrost fe400000.bifrost: features: 00000000,13de77ff, issues: 00000000,00000400 Oct 31 06:05:19 volumio kernel: panfrost fe400000.bifrost: Features: L2:0x07120206 Shader:0x00000002 Tiler:0x00000209 Mem:0x101 MMU:0x00002823 AS:0xff JS:0x7 Oct 31 06:05:19 volumio kernel: panfrost fe400000.bifrost: shader_present=0xf l2_present=0x1 Oct 31 06:05:19 volumio kernel: [drm] Initialized panfrost 1.2.0 20180908 for fe400000.bifrost on minor 1 Oct 31 06:05:19 volumio kernel: usb 1-1.1: device descriptor read/64, error -71 Oct 31 06:05:19 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: aml_xhci_alloc_dev, slot=2 Oct 31 06:05:19 volumio kernel: usb 1-1.1: new high-speed USB device number 4 using xhci-hcd-meson Oct 31 06:05:19 volumio kernel: usb 1-1.1: New USB device found, idVendor=3353, idProduct=a002, bcdDevice= 1.00 Oct 31 06:05:19 volumio kernel: usb 1-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=2 Oct 31 06:05:19 volumio kernel: usb 1-1.1: Product: Tone2 Pro Oct 31 06:05:19 volumio kernel: usb 1-1.1: Manufacturer: Khadas Oct 31 06:05:19 volumio kernel: usb 1-1.1: SerialNumber: 00000000 Oct 31 06:05:19 volumio kernel: usb 1-1.1: 1:3 : unsupported format bits 0x100000000 Oct 31 06:05:19 volumio kernel: xhci-hcd-meson xhci-hcd-meson.0.auto: aml_xhci_alloc_dev, slot=3 Oct 31 06:05:19 volumio kernel: usb 1-1.2: new full-speed USB device number 5 using xhci-hcd-meson Oct 31 06:05:19 volumio kernel: lcd vlock_en=1, vlock_mode=0x8 i=101 Oct 31 06:05:19 volumio kernel: usb 1-1.2: New USB device found, idVendor=2717, idProduct=5010, bcdDevice= 1.03 Oct 31 06:05:19 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 31 06:05:19 volumio kernel: usb 1-1.2: Product: Mi Wireless Combo Oct 31 06:05:19 volumio kernel: usb 1-1.2: Manufacturer: MOSART Semi. Oct 31 06:05:19 volumio kernel: usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes Oct 31 06:05:19 volumio kernel: hid-generic 0003:3353:A002.0001: hiddev96,hidraw0: USB HID v1.10 Device [Khadas Tone2 Pro] on usb-xhci-hcd-meson.0.auto-1.1/input4 Oct 31 06:05:19 volumio kernel: input: Khadas Tone2 Pro as /devices/platform/soc/fde00000.crg3drd/xhci-hcd-meson.0.auto/usb1/1-1/1-1.1/1-1.1:1.5/0003:3353:A002.0002/input/input9 Oct 31 06:05:19 volumio kernel: hid-generic 0003:3353:A002.0002: input,hidraw1: USB HID v1.10 Device [Khadas Tone2 Pro] on usb-xhci-hcd-meson.0.auto-1.1/input5 Oct 31 06:05:19 volumio kernel: input: MOSART Semi. Mi Wireless Combo as /devices/platform/soc/fde00000.crg3drd/xhci-hcd-meson.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:2717:5010.0003/input/input10 Oct 31 06:05:19 volumio kernel: hid-generic 0003:2717:5010.0003: input,hidraw2: USB HID v1.10 Keyboard [MOSART Semi. Mi Wireless Combo] on usb-xhci-hcd-meson.0.auto-1.2/input0 Oct 31 06:05:19 volumio kernel: input: MOSART Semi. Mi Wireless Combo Mouse as /devices/platform/soc/fde00000.crg3drd/xhci-hcd-meson.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:2717:5010.0004/input/input11 Oct 31 06:05:19 volumio kernel: input: MOSART Semi. Mi Wireless Combo Consumer Control as /devices/platform/soc/fde00000.crg3drd/xhci-hcd-meson.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:2717:5010.0004/input/input12 Oct 31 06:05:19 volumio kernel: input: MOSART Semi. Mi Wireless Combo System Control as /devices/platform/soc/fde00000.crg3drd/xhci-hcd-meson.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:2717:5010.0004/input/input13 Oct 31 06:05:19 volumio kernel: input: MOSART Semi. Mi Wireless Combo as /devices/platform/soc/fde00000.crg3drd/xhci-hcd-meson.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:2717:5010.0004/input/input14 Oct 31 06:05:19 volumio kernel: input: MOSART Semi. Mi Wireless Combo as /devices/platform/soc/fde00000.crg3drd/xhci-hcd-meson.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:2717:5010.0004/input/input15 Oct 31 06:05:19 volumio kernel: hid-generic 0003:2717:5010.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [MOSART Semi. Mi Wireless Combo] on usb-xhci-hcd-meson.0.auto-1.2/input1 Oct 31 06:05:19 volumio kernel: usbcore: registered new interface driver usbhid Oct 31 06:05:19 volumio kernel: usbhid: USB HID core driver Oct 31 06:05:19 volumio kernel: usbcore: registered new interface driver usbmouse Oct 31 06:05:19 volumio kernel: usbcore: registered new interface driver usbkbd Oct 31 06:05:19 volumio kernel: modprobe (247) used greatest stack depth: 12800 bytes left Oct 31 06:05:19 volumio kernel: EXT4-fs (mmcblk0p2): recovery complete Oct 31 06:05:19 volumio kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. Oct 31 06:05:19 volumio kernel: mount (278) used greatest stack depth: 12112 bytes left Oct 31 06:05:19 volumio kernel: loop0: detected capacity change from 0 to 1027176 Oct 31 06:05:19 volumio kernel: cat (308) used greatest stack depth: 11952 bytes left Oct 31 06:05:19 volumio kernel: EXT4-fs (mmcblk0p3): recovery complete Oct 31 06:05:19 volumio kernel: EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. Oct 31 06:05:19 volumio kernel: mount (317) used greatest stack depth: 11072 bytes left Oct 31 06:05:19 volumio kernel: systemd-udevd (210) used greatest stack depth: 10464 bytes left Oct 31 06:05:19 volumio systemd[1]: Inserted module 'autofs4' Oct 31 06:05:19 volumio systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) Oct 31 06:05:19 volumio systemd[1]: Detected architecture arm64. Oct 31 06:05:19 volumio systemd[1]: Set hostname to . Oct 31 06:05:19 volumio systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly. Oct 31 06:05:19 volumio systemd[1]: Created slice system-systemd\x2dfsck.slice. Oct 31 06:05:19 volumio systemd[1]: Created slice system-serial\x2dgetty.slice. Oct 31 06:05:19 volumio systemd[1]: Created slice User and Session Slice. Oct 31 06:05:19 volumio systemd[1]: Started Forward Password Requests to Wall Directory Watch. Oct 31 06:05:19 volumio systemd[1]: Listening on Journal Socket. Oct 31 06:05:19 volumio systemd[1]: Starting Create list of required static device nodes for the current kernel... Oct 31 06:05:19 volumio kernel: RPC: Registered named UNIX socket transport module. Oct 31 06:05:19 volumio kernel: RPC: Registered udp transport module. Oct 31 06:05:19 volumio kernel: RPC: Registered tcp transport module. Oct 31 06:05:19 volumio kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 31 06:05:19 volumio kernel: [wireless]: [wifi_dev_probe] buf_level is :2 Oct 31 06:05:19 volumio kernel: [wireless]: amlogic rfkill init Oct 31 06:05:19 volumio kernel: [wireless]: BT_RADIO going: on Oct 31 06:05:19 volumio kernel: [wireless]: AML_BT: going ON,btpower_evt=0 Oct 31 06:05:19 volumio kernel: [wireless]: request_irq error ret=-22 Oct 31 06:05:19 volumio kernel: [wireless]: dev_pm_set_wake_irq failed: -22 Oct 31 06:05:19 volumio kernel: input: input_btrcu as /devices/platform/aml_bt/input/input16 Oct 31 06:05:19 volumio systemd-journald[382]: Journal started Oct 31 06:05:19 volumio systemd-journald[382]: Runtime journal (/run/log/journal/e5767396f13afa1c3d34d02d671b7e2c) is 3.7M, max 30.0M, 26.2M free. Oct 31 06:05:19 volumio systemd-modules-load[360]: Inserted module 'amlogic_crypto_dma' Oct 31 06:05:19 volumio fake-hwclock[363]: Current system time: 2024-10-31 06:05:18 Oct 31 06:05:19 volumio fake-hwclock[363]: fake-hwclock saved clock information is in the past: 2024-10-31 06:04:58 Oct 31 06:05:19 volumio fake-hwclock[363]: To set system time to this saved clock anyway, use "force" Oct 31 06:05:19 volumio systemd[1]: Mounted /var/log. Oct 31 06:05:19 volumio systemd[1]: Mounted /tmp. Oct 31 06:05:19 volumio systemd[1]: Mounted /var/spool/cups. Oct 31 06:05:19 volumio systemd[1]: Mounting /var/spool/cups/tmp... Oct 31 06:05:19 volumio systemd[1]: Starting Flush Journal to Persistent Storage... Oct 31 06:05:19 volumio systemd[1]: Mounted /var/spool/cups/tmp. Oct 31 06:05:19 volumio systemd-udevd[392]: Network interface NamePolicy= disabled on kernel command line, ignoring. Oct 31 06:05:19 volumio systemd-journald[382]: Runtime journal (/run/log/journal/e5767396f13afa1c3d34d02d671b7e2c) is 3.7M, max 30.0M, 26.2M free. Oct 31 06:05:19 volumio kernel: [wireless]: [usb_power_control] Set BT power down Oct 31 06:05:19 volumio kernel: [wireless]: [usb_power_control] Set BT power on ! Oct 31 06:05:19 volumio systemd[1]: Started Flush Journal to Persistent Storage. Oct 31 06:05:19 volumio systemd[1]: Started udev Kernel Device Manager. Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_open Oct 31 06:05:19 volumio kernel: ionvid: dbg: vidioc_close Oct 31 06:05:19 volumio kernel: amlogic_host fe340018.hifidsp0: mbox_request_channel_byname() requires an "mbox-names" property Oct 31 06:05:19 volumio kernel: amlogic_host fe340018.hifidsp0: Not find mbox channel byname Oct 31 06:05:19 volumio kernel: amlogic_host fe350018.hifidsp1: this device not support dsp Oct 31 06:05:19 volumio kernel: amlogic_host: probe of fe350018.hifidsp1 failed with error -22 Oct 31 06:05:19 volumio systemd-udevd[407]: Using default interface naming scheme 'v240'. Oct 31 06:05:19 volumio kernel: audio-ddr-manager fe330000.audiobus:ddr_manager: 0, irqs frddr 43 Oct 31 06:05:19 volumio kernel: audio-ddr-manager fe330000.audiobus:ddr_manager: 1, irqs frddr 44 Oct 31 06:05:19 volumio kernel: vdin-v4l: vdin_v4l2_open Oct 31 06:05:19 volumio kernel: audio-ddr-manager fe330000.audiobus:ddr_manager: 2, irqs frddr 45 Oct 31 06:05:19 volumio kernel: video70: Oct 31 06:05:19 volumio kernel: vdin-v4l: vdin_v4l2_open Oct 31 06:05:19 volumio kernel: video71: VIDIOC_QUERYCAP: driver=vdin_video, card=mesont7, bus=vdin1 v4l2, version=0x20220120, capabilities=0x85201000, device_caps=0x05201000 Oct 31 06:05:19 volumio kernel: vdin-v4l: vdin_v4l2_release Oct 31 06:05:19 volumio kernel: audio-ddr-manager fe330000.audiobus:ddr_manager: 3, irqs frddr 46 Oct 31 06:05:19 volumio kernel: VIDIOC_QUERYCAP Oct 31 06:05:19 volumio kernel: audio-ddr-manager fe330000.audiobus:ddr_manager: 4, irqs frddr 47 Oct 31 06:05:19 volumio kernel: : driver=vdin_video, card=mesont7, bus=vdin0 v4l2, version=0x20220120, capabilities=0x85201000, device_caps=0x05201000 Oct 31 06:05:19 volumio kernel: vdin-v4l: vdin_v4l2_release Oct 31 06:05:19 volumio kernel: [media_clock]: of_address_to_resource failed Oct 31 06:05:19 volumio kernel: [media_clock]: initial_dos_device end, chip 54(0) Oct 31 06:05:19 volumio systemd-udevd[407]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 31 06:05:19 volumio systemd-udevd[407]: link_config: could not get ethtool features for eth0 Oct 31 06:05:19 volumio systemd-udevd[407]: Could not set offload features of eth0: Device or resource busy Oct 31 06:05:19 volumio kernel: [snd-soc]: extn_platform_probe, register soc platform Oct 31 06:05:19 volumio kernel: snd_pdm fe330000.audiobus:pdm: Can't retrieve xtal_clk clock Oct 31 06:05:19 volumio kernel: [snd-soc]: resample_platform_probe Oct 31 06:05:19 volumio kernel: audioresample fe330000.audiobus:resample@0: Can't retrieve suspend-clk-off Oct 31 06:05:19 volumio kernel: audioresample fe330000.audiobus:resample@0: no clk_src_cd clock for hifi1 case Oct 31 06:05:19 volumio kernel: [snd-soc]: new_resample_init: Start init new resample 0 parameters! Oct 31 06:05:19 volumio kernel: Codec io: No support bus type 2 to write. Oct 31 06:05:19 volumio kernel: [snd-soc]: resample_clk_set, resample_pll:491517535, sclk:12287939, clk:12287939 Oct 31 06:05:19 volumio kernel: [snd-soc]: new_resample_set_ratio(), id = 0, phase_step = 0x10000000, input_sr = 48000, output_sr = 48000 Oct 31 06:05:19 volumio kernel: [snd-soc]: resample id = 0, new resample = 2, resample_module = 8 Oct 31 06:05:19 volumio kernel: [snd-soc]: resample_platform_probe Oct 31 06:05:19 volumio kernel: audioresample fe330000.audiobus:resample@1: Can't retrieve suspend-clk-off Oct 31 06:05:19 volumio kernel: audioresample fe330000.audiobus:resample@1: no clk_src_cd clock for hifi1 case Oct 31 06:05:19 volumio kernel: [snd-soc]: new_resample_init: Start init new resample 1 parameters! Oct 31 06:05:19 volumio kernel: Codec io: No support bus type 2 to write. Oct 31 06:05:19 volumio kernel: [snd-soc]: resample_clk_set, resample_pll:491517535, sclk:12287939, clk:12287939 Oct 31 06:05:19 volumio kernel: [snd-soc]: new_resample_set_ratio(), id = 1, phase_step = 0x30000000, input_sr = 48000, output_sr = 16000 Oct 31 06:05:19 volumio kernel: [snd-soc]: resample id = 1, new resample = 2, resample_module = 7 Oct 31 06:05:19 volumio kernel: meson-gxbb-wdt fe002100.watchdog: IRQ index 0 not found Oct 31 06:05:19 volumio systemd[1]: Found device /dev/ttyS0. Oct 31 06:05:19 volumio kernel: meson-gxbb-wdt fe002100.watchdog: feeding watchdog mode: [userspace] Oct 31 06:05:19 volumio kernel: snd_spdif fe330000.audiobus:spdif@0: Can't retrieve suspend-clk-off Oct 31 06:05:19 volumio kernel: snd_spdif fe330000.audiobus:spdif@1: Can't retrieve suspend-clk-off Oct 31 06:05:19 volumio kernel: snd_tdm fe330000.audiobus:tdm@0: Can't retrieve suspend-clk-off Oct 31 06:05:19 volumio kernel: snd_tdm fe330000.audiobus:tdm@1: Can't retrieve suspend-clk-off Oct 31 06:05:19 volumio kernel: [snd-soc]: TDM id 1 supports tdmin_b Oct 31 06:05:19 volumio kernel: [snd-soc]: Channel_Mask: lane_ss = 0 Oct 31 06:05:19 volumio kernel: snd_tdm fe330000.audiobus:tdm@2: Can't retrieve suspend-clk-off Oct 31 06:05:19 volumio kernel: [snd-soc]: TDM id 2 supports hdmirx Oct 31 06:05:19 volumio systemd-udevd[411]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:19 volumio systemd-udevd[404]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:19 volumio systemd[1]: Started udev Coldplug all Devices. Oct 31 06:05:19 volumio systemd-udevd[427]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:19 volumio systemd-udevd[398]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:19 volumio systemd-udevd[408]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:19 volumio kernel: [snd-soc]: failed to get data_lb_ratec Oct 31 06:05:19 volumio kernel: input: vad_keypad as /devices/platform/soc/fe330000.audiobus/fe330000.audiobus:vad/input/input17 Oct 31 06:05:19 volumio systemd-udevd[400]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:19 volumio systemd-udevd[461]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:19 volumio kernel: [mmc]: r: b_s = 0, b_sz = 2c, f: b_s = 1c, b_sz = 24 Oct 31 06:05:19 volumio kernel: [mmc]: the final result: sel = 1, rx = 16 Oct 31 06:05:19 volumio kernel: mmc2: new ultra high speed SDR104 SDIO card at address 0001 Oct 31 06:05:19 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:19 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:19 volumio kernel: mousedev: PS/2 mouse device common for all mice Oct 31 06:05:19 volumio kernel: [wireless]: [usb_power_control] Set BT power on ! Oct 31 06:05:19 volumio systemd-udevd[460]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 31 06:05:19 volumio systemd-modules-load[360]: Inserted module 'amlogic_wireless' Oct 31 06:05:19 volumio systemd-modules-load[360]: Module 'amlogic_pcie_v2_host' is builtin Oct 31 06:05:19 volumio systemd-modules-load[360]: Module 'amlogic_pcie_v3_host' is builtin Oct 31 06:05:20 volumio systemd-udevd[395]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio kernel: [firmware]: read format in dts failed, ret = -22 Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio kernel: OF: graph: no port node found in /csiphy0@fe3bfc00 Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio kernel: OF: graph: no port node found in /csiphy0@fe3bfc00 Oct 31 06:05:20 volumio kernel: platform fe3bfc00.csiphy0: Error to get csiphy_clk Oct 31 06:05:20 volumio kernel: platform fe3bfc00.csiphy0: Failed to parse dev Oct 31 06:05:20 volumio kernel: aml_camera camera0: Failed to init csiphy subdev: -2 Oct 31 06:05:20 volumio kernel: aml_camera: probe of camera0 failed with error -2 Oct 31 06:05:20 volumio kernel: OF: graph: no port node found in /csiphy2@fe3bf400 Oct 31 06:05:20 volumio kernel: OF: graph: no port node found in /csiphy2@fe3bf400 Oct 31 06:05:20 volumio kernel: platform fe3bf400.csiphy2: Error to get csiphy_clk Oct 31 06:05:20 volumio kernel: ntfs3: Max link count 4000 Oct 31 06:05:20 volumio kernel: platform fe3bf400.csiphy2: Failed to parse dev Oct 31 06:05:20 volumio kernel: ntfs3: Enabled Linux POSIX ACLs support Oct 31 06:05:20 volumio kernel: aml_camera camera1: Failed to init csiphy subdev: -2 Oct 31 06:05:20 volumio kernel: ntfs3: Read-only LZX/Xpress compression included Oct 31 06:05:20 volumio kernel: aml_camera: probe of camera1 failed with error -2 Oct 31 06:05:20 volumio kernel: vdec vdec: Get pwrc-vdec-2 failed, pm-domain: 0 Oct 31 06:05:20 volumio kernel: probe iq_dev for sensor: os08a10 Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: dp_buf:[1:0]di buf_mgr free Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: dp_buf:[1:2]di buf_mgr free Oct 31 06:05:20 volumio kernel: dp_buf:[1:1]di buf_mgr free Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: dp_buf:[1:3]di buf_mgr free Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: dp_buf:[1:7]di buf_mgr free Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: dp_buf:[1:8]di buf_mgr free Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: v4lvid: dbg: v4lvideo open Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: dp_buf:[1:6]di buf_mgr free Oct 31 06:05:20 volumio kernel: v4lvid: dbg: vidioc_close!!!! Oct 31 06:05:20 volumio kernel: dp_buf:[1:4]di buf_mgr free Oct 31 06:05:20 volumio kernel: dp_buf:[1:5]di buf_mgr free Oct 31 06:05:20 volumio kernel: vdec vdec: Get pwrc-hevcb failed, pm-domain: 0 Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio kernel: Amlogic A/V streaming port init Oct 31 06:05:20 volumio kernel: config sensor os08a10 driver. Oct 31 06:05:20 volumio kernel: config sensor sub imx290sub driver. Oct 31 06:05:20 volumio kernel: config sensor ssub imx290ssub driver. Oct 31 06:05:20 volumio kernel: soc_sensor_probe: failed to get sensor name sssub Oct 31 06:05:20 volumio kernel: config sensor ssub imx290sssub driver. Oct 31 06:05:20 volumio kernel: sensor bsp init Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'zsmalloc' Oct 31 06:05:20 volumio systemd[1]: Found device /dev/disk/by-uuid/EC20-43C7. Oct 31 06:05:20 volumio systemd-udevd[454]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd-udevd[419]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd-udevd[420]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:20 volumio kernel: i2c_dev: i2c /dev entries driver Oct 31 06:05:20 volumio systemd-udevd[399]: Using default interface naming scheme 'v240'. Oct 31 06:05:20 volumio systemd-udevd[399]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 31 06:05:20 volumio systemd-udevd[399]: Could not generate persistent MAC address for dummy0: No such file or directory Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'ntfs3' Oct 31 06:05:20 volumio systemd-udevd[436]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'system_heap' Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'mdio_mux' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'pcs_xpcs' is builtin Oct 31 06:05:20 volumio kernel: [media_clock]: set_clock_gate get hevc_mux_str Oct 31 06:05:20 volumio kernel: [media_clock]: set_clock_gate get hevcb mux Oct 31 06:05:20 volumio kernel: [media_clock]: set_clock_gate get hcodec mux Oct 31 06:05:20 volumio kernel: [media_clock]: set_clock_gate get vdec mux Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'stmmac' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'stmmac_platform' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'dwmac_meson' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'amlogic_mdio_g12a' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'dwmac_meson8b' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'dwmac_dwc_qos_eth' is builtin Oct 31 06:05:20 volumio systemd-udevd[408]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd-udevd[416]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio systemd-udevd[400]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'i2c_dev' Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'videobuf_vmalloc' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'leds_gpio' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'amlogic_audio_utils' is builtin Oct 31 06:05:20 volumio kernel: aml-vcodec-dec vcodec_dec: v4ldec registered as /dev/video26 Oct 31 06:05:20 volumio kernel: aml dvb init Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_dvb_demux' Oct 31 06:05:20 volumio systemd-udevd[406]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_dvb_ci' Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'dwc_otg' is builtin Oct 31 06:05:20 volumio systemd-modules-load[360]: Module 'amlogic_rtc' is builtin Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'bl40_module' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_socinfo' Oct 31 06:05:20 volumio kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Oct 31 06:05:20 volumio kernel: cfg80211: failed to load regulatory.db Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_led' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_jtag' Oct 31 06:05:20 volumio systemd-udevd[433]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio kernel: asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517 Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_card_probe error ret:-517 Oct 31 06:05:20 volumio kernel: [usb-cam]: usbcam: usbcam init! Oct 31 06:05:20 volumio kernel: [usb-cam]: usbcam: usbcam register class! Oct 31 06:05:20 volumio kernel: usbcore: registered new interface driver aml_usbcam Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_usb_cam' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_dummy' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_t9015' Oct 31 06:05:20 volumio kernel: [snd-soc]: asoc debug: extn_dai_probe-517 Oct 31 06:05:20 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x42, value 0xfffffff9 Oct 31 06:05:20 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x40, value 0x14830490 Oct 31 06:05:20 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x41, value 0x40011508 Oct 31 06:05:20 volumio kernel: tl1_acodec fe01a000.codec: Can't retrieve acodec clock Oct 31 06:05:20 volumio kernel: [snd-soc]: resample_set resample_0 to Enable:48K, last Disable Oct 31 06:05:20 volumio kernel: [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.34 (wlan=r892223-20230904-2)(20240912-1) drivers/net/wireless/bcmdhd compiled on Oct 24 2024 at 13:55:25 Oct 31 06:05:20 volumio kernel: [dhd] ANDROID_VERSION = 13 Oct 31 06:05:20 volumio kernel: [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=126, oob_irq_flags=0x4 Oct 31 06:05:20 volumio kernel: [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1 Oct 31 06:05:20 volumio kernel: [dhd] dhd_wifi_platform_load: Enter Oct 31 06:05:20 volumio kernel: [dhd] Power-up adapter 'DHD generic adapter' Oct 31 06:05:20 volumio kernel: [dhd] wifi_platform_set_power = 1, delay: 200 msec Oct 31 06:05:20 volumio kernel: [dhd] ======== PULL WL_REG_ON(-1) HIGH! ======== Oct 31 06:05:20 volumio kernel: [wireless]: [extern_wifi_set_enable] WIFI Enable! 381 Oct 31 06:05:20 volumio kernel: [snd-codec-tl1]: aml_tl1_acodec tdmout_index 1 tdmin_index 1 dat0_ch_sel 1 dat1_ch_sel 0 Oct 31 06:05:20 volumio kernel: [snd-codec-tl1]: aml_tl1_acodec diff_output 0 diff_input 0 dac_extra_gain 0 dac_output_invert 0 lane_offset 8 Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in /sys/subsystem/net/devices/eth0 being skipped. Oct 31 06:05:20 volumio systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Oct 31 06:05:20 volumio kernel: [snd-soc]: new_resample_set_ratio(), id = 0, phase_step = 0x10000000, input_sr = 48000, output_sr = 48000 Oct 31 06:05:20 volumio kernel: [snd-soc]: spdifout_play_with_zerodata_free, spdif id:0 Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Huge Pages File System being skipped. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. Oct 31 06:05:20 volumio systemd-udevd[412]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Oct 31 06:05:20 volumio systemd[1]: Starting File System Check on /dev/disk/by-uuid/EC20-43C7... Oct 31 06:05:20 volumio systemd-udevd[439]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio kernel: [snd-soc]: spdifout_play_with_zerodata_free, spdif id:1 Oct 31 06:05:20 volumio kernel: [snd-soc]: loopback_dai_set_sysclk, 0, 12288000, 0 Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_tl1' Oct 31 06:05:20 volumio kernel: [snd-soc]: asoc loopback_dai_set_fmt, 0x4010, 00000000186be501 Oct 31 06:05:20 volumio kernel: [snd-soc]: no node audio_effect for eq/drc info! Oct 31 06:05:20 volumio systemd-udevd[413]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_ad82584f' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_tas5707' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_tas5805' Oct 31 06:05:20 volumio systemd[1]: Starting Helper to synchronize boot up for ifupdown... Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_pa1' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amlogic_snd_codec_ad82128' Oct 31 06:05:20 volumio systemd-modules-load[360]: Failed to find module 'amlogic-snd-codec-sy6026l' Oct 31 06:05:20 volumio systemd[1]: Starting Show Plymouth Boot Screen... Oct 31 06:05:20 volumio systemd[1]: Started Helper to synchronize boot up for ifupdown. Oct 31 06:05:20 volumio kernel: [snd-soc]: spdif_set_cs(), status0=0x2000100 Oct 31 06:05:20 volumio kernel: [snd-soc]: Fine spdif sysclk setting range(0~2000000), 5644750 Oct 31 06:05:20 volumio systemd-udevd[399]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 1' failed with exit code 99. Oct 31 06:05:20 volumio kernel: [snd-soc]: aml_audio_set_spdif_mute(), no pinctrl Oct 31 06:05:20 volumio kernel: [snd-soc]: spdif_set_cs(), status0=0x0 Oct 31 06:05:20 volumio kernel: [snd-soc]: T7_FRHDMIRX, can't switch mode Oct 31 06:05:20 volumio kernel: [snd-soc]: Fine tdm clk setting range (0~2000000), 11289500 Oct 31 06:05:20 volumio kernel: [snd-soc]: tdmout_gain_set, id: 1, gain: 0x0 Oct 31 06:05:20 volumio kernel: [snd-soc]: arc_enable enable: 0, type -107, is_reset_hpd 0 Oct 31 06:05:20 volumio kernel: [snd-soc]: hdmirx_arc_update_reg reg 0x40, mask 0x80000000, value 0x0 Oct 31 06:05:20 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x42, value 0xfffffff9 Oct 31 06:05:20 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x40, value 0x14830490 Oct 31 06:05:20 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x41, value 0x40011508 Oct 31 06:05:20 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:20 volumio kernel: [snd-soc]: Error: parma_num = 1, band_id = 10377 Oct 31 06:05:20 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:20 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:20 volumio kernel: [snd-soc]: vad_set_enable_enum, p_vad->end = 0, set value 0 Oct 31 06:05:20 volumio kernel: [snd-soc]: out of value, fixed it Oct 31 06:05:20 volumio kernel: [snd-soc]: id=0 set inskew=0 Oct 31 06:05:20 volumio kernel: [snd-soc]: clk_set_force_mpll: force_mpll_clk = 0 Oct 31 06:05:20 volumio systemd[1]: Started File System Check Daemon to report status. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'mac80211' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'video_framerate_adapter' Oct 31 06:05:20 volumio kernel: Registered frame rate driver success. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Huge Pages File System being skipped. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Oct 31 06:05:20 volumio systemd[1]: Starting Load/Save RF Kill Switch Status... Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mh264' Oct 31 06:05:20 volumio systemd[1]: plymouth-start.service: Succeeded. Oct 31 06:05:20 volumio systemd[1]: Started Show Plymouth Boot Screen. Oct 31 06:05:20 volumio systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mh264_v4l' Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Oct 31 06:05:20 volumio systemd[1]: Reached target Local Encrypted Volumes. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_h264mvc' Oct 31 06:05:20 volumio systemd[1]: Reached target Paths. Oct 31 06:05:20 volumio systemd[1]: Started Load/Save RF Kill Switch Status. Oct 31 06:05:20 volumio kernel: [wireless]: bt_set_block:rfkill already on Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_h265' Oct 31 06:05:20 volumio kernel: [dhd] wifi_platform_bus_enumerate device present 1 Oct 31 06:05:20 volumio kernel: [dhd] ======== Card detection to detect SDIO card! ======== Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_h265_v4l' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mmjpeg' Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:20 volumio kernel: meson-gx-mmc fe088000.sdio: 8 [0x1aa], TIMEOUT[0x2800] Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mmjpeg_v4l' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mmpeg12' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mmpeg12_v4l' Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mmpeg4' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mmpeg4_v4l' Oct 31 06:05:20 volumio systemd-fsck[578]: fsck.fat 4.1 (2017-01-24) Oct 31 06:05:20 volumio systemd-fsck[578]: /dev/mmcblk0p1: 48 files, 146529/461744 clusters Oct 31 06:05:20 volumio systemd[1]: Started File System Check on /dev/disk/by-uuid/EC20-43C7. Oct 31 06:05:20 volumio kernel: 0: amvdec_vc1 module init Oct 31 06:05:20 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_vc1' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_vp9' Oct 31 06:05:20 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:20 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:20 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:20 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:20 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:20 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:20 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:20 volumio kernel: Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio systemd[1]: Mounting /boot... Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_vp9_v4l' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_avs2' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mavs' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_av1' Oct 31 06:05:20 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:20 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:20 volumio kernel: Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio systemd[1]: Mounted /boot. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_av1_v4l' Oct 31 06:05:20 volumio systemd[1]: Reached target Local File Systems. Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:20 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:20 volumio kernel: Oct 31 06:05:20 volumio systemd[1]: Starting Create Volatile Files and Directories... Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_avs3_v4l' Oct 31 06:05:20 volumio kernel: amvdec_avs3_driver_init_module bufspec_index = 2 Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_avs2_v4l' Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:20 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:20 volumio kernel: Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... Oct 31 06:05:20 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:20 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:20 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:20 volumio kernel: Oct 31 06:05:20 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:20 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:20 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:20 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_mavs_v4l' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvdec_avs2_fb_v4l' Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'media_sync' Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'encoder_common' Oct 31 06:05:20 volumio kernel: [media_sync]:mediasync_policy_manager_init(ffffffc0118eb000) initiation success. Oct 31 06:05:20 volumio systemd[1]: Starting Preprocess NFS configuration... Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'jpegenc' Oct 31 06:05:20 volumio systemd[1]: Started Create Volatile Files and Directories. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in Network Time Synchronization being skipped. Oct 31 06:05:20 volumio systemd-modules-load[360]: Inserted module 'amvenc_multi' Oct 31 06:05:20 volumio systemd[1]: Starting RPC bind portmap service... Oct 31 06:05:20 volumio systemd[1]: Started Entropy daemon using the HAVEGE algorithm. Oct 31 06:05:20 volumio systemd[1]: Starting Update UTMP about System Boot/Shutdown... Oct 31 06:05:20 volumio systemd[1]: plymouth-read-write.service: Succeeded. Oct 31 06:05:20 volumio systemd[1]: Started Tell Plymouth To Write Out Runtime Data. Oct 31 06:05:20 volumio systemd[1]: nfs-config.service: Succeeded. Oct 31 06:05:20 volumio systemd[1]: Started Preprocess NFS configuration. Oct 31 06:05:20 volumio systemd[1]: Received SIGRTMIN+20 from PID 261 (plymouthd). Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped. Oct 31 06:05:20 volumio systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. Oct 31 06:05:20 volumio systemd[1]: Reached target NFS client services. Oct 31 06:05:20 volumio systemd[1]: Started Update UTMP about System Boot/Shutdown. Oct 31 06:05:20 volumio systemd[1]: Started RPC bind portmap service. Oct 31 06:05:20 volumio systemd[1]: Reached target Remote File Systems (Pre). Oct 31 06:05:20 volumio systemd[1]: Reached target Remote File Systems. Oct 31 06:05:20 volumio systemd[1]: Reached target RPC Port Mapper. Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:20 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:20 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:21 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:21 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:21 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:21 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:21 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:21 volumio kernel: [mmc]: r: b_s = 0, b_sz = 2c, f: b_s = 1c, b_sz = 24 Oct 31 06:05:21 volumio kernel: [mmc]: the final result: sel = 1, rx = 16 Oct 31 06:05:21 volumio kernel: [dhd] dummy_probe: enter Oct 31 06:05:21 volumio kernel: [dhd] dummy_probe: enter Oct 31 06:05:21 volumio kernel: [dhd] bcmsdh_register: register client driver Oct 31 06:05:21 volumio kernel: [dhd] bcmsdh_sdmmc_probe: Enter num=1 Oct 31 06:05:21 volumio kernel: [dhd] bcmsdh_sdmmc_probe: Enter num=2 Oct 31 06:05:21 volumio kernel: [dhd] bus num (host idx)=2, slot num (rca)=1 Oct 31 06:05:21 volumio kernel: [dhd] found adapter info 'DHD generic adapter' Oct 31 06:05:21 volumio kernel: [dhd] succeed to alloc static buf Oct 31 06:05:21 volumio kernel: [dhd] sdioh_attach: set sd_f2_blocksize 256 Oct 31 06:05:21 volumio kernel: [dhd] sdioh_attach: sd clock rate = 200000000 Oct 31 06:05:21 volumio kernel: [dhd] dhdsdio_probe : no mutex held Oct 31 06:05:21 volumio kernel: [dhd] dhdsdio_probe : set mutex lock Oct 31 06:05:21 volumio kernel: [dhd] F1 signature read @0x18000000=0x1042aae8 Oct 31 06:05:21 volumio kernel: [dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4 Oct 31 06:05:21 volumio kernel: [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000 Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:21 volumio kernel: [dhd] dhd_conf_set_chiprev : devid=0xaae8, chip=0xaae8, chiprev=2 Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:21 volumio kernel: [dhd] dhd_conf_disable_slpauto : dhd_slpauto = 1 Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:21 volumio kernel: [dhd] dhd_log_dump_init: kernel log buf size = 1024KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 153KB Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:21 volumio kernel: [dhd] dhd_attach(): thread:dhd_watchdog_thread:258 started Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:21 volumio kernel: [dhd] dhd_attach(): thread:dhd_dpc:259 started Oct 31 06:05:21 volumio kernel: [dhd] dhd_dpc_thread: set dhd_dpc_prio 98 Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:21 volumio kernel: [dhd] dhd_attach(): thread:dhd_rxf:25a started Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:21 volumio kernel: [dhd] dhd_deferred_work_init: work queue initialized Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:21 volumio kernel: [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2 Oct 31 06:05:21 volumio kernel: [dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=10, TCPDATA_INFO_MAXNUM=10 Oct 31 06:05:21 volumio kernel: [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3 Oct 31 06:05:21 volumio kernel: [dhd] sdioh_cis_read: func_cis_ptr[0]=0x1070 Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:21 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:21 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN Oct 31 06:05:21 volumio kernel: [dhd] Dongle Host Driver, version 101.10.361.34 (wlan=r892223-20230904-2)(20240912-1) drivers/net/wireless/bcmdhd compiled on Oct 24 2024 at 13:55:25 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] Register interface [wlan0] MAC: 10:2c:6b:10:d7:84 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] [wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: [dhd] dhd_bus_devreset: == Power OFF == Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: [dhd] dhd_bus_stop: making DHD_BUS_DOWN Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] bcmsdh_oob_intr_unregister: Enter Oct 31 06:05:21 volumio kernel: [dhd] bcmsdh_oob_intr_unregister: irq is not registered Oct 31 06:05:21 volumio kernel: [dhd] dhd_bus_devreset: making dhdpub up FALSE Oct 31 06:05:21 volumio kernel: [dhd] dhd_txglom_enable: enable 0 Oct 31 06:05:21 volumio kernel: [dhd] dhd_bus_devreset: making DHD_BUS_DOWN Oct 31 06:05:21 volumio kernel: [dhd] wifi_platform_set_power = 0, delay: 0 msec Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] ======== PULL WL_REG_ON(-1) LOW! ======== Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [wireless]: [extern_wifi_set_enable] WIFI Disable! 381 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] [wlan0] wl_android_wifi_off : out Oct 31 06:05:21 volumio kernel: [dhd] Register interface [wlan1] MAC: 12:2c:6b:10:d7:84 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] dhdsdio_probe : mutex is released. Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: [dhd] _dhd_module_init: Exit err=0 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio systemd-modules-load[360]: Inserted module 'dhd' Oct 31 06:05:21 volumio systemd-udevd[413]: Using default interface naming scheme 'v240'. Oct 31 06:05:21 volumio systemd-udevd[409]: Using default interface naming scheme 'v240'. Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio systemd-udevd[409]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 31 06:05:21 volumio systemd-modules-load[360]: Inserted module 'snd_seq' Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio systemd-udevd[413]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 31 06:05:21 volumio systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE Oct 31 06:05:21 volumio systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:21 volumio systemd[1]: Failed to start Load Kernel Modules. Oct 31 06:05:21 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:21 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:21 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:21 volumio systemd[1]: Mounting Kernel Configuration File System... Oct 31 06:05:21 volumio systemd[1]: Mounting FUSE Control File System... Oct 31 06:05:21 volumio systemd[1]: Starting Apply Kernel Variables... Oct 31 06:05:21 volumio systemd[1]: Mounted Kernel Configuration File System. Oct 31 06:05:21 volumio systemd[1]: Mounted FUSE Control File System. Oct 31 06:05:21 volumio kernel: Enabled cp15_barrier support Oct 31 06:05:21 volumio systemd[1]: Started Apply Kernel Variables. Oct 31 06:05:21 volumio systemd[1]: Started ifup for eth0. Oct 31 06:05:21 volumio systemd[1]: Starting Raise network interfaces... Oct 31 06:05:21 volumio systemd[1]: Reached target System Initialization. Oct 31 06:05:21 volumio systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket. Oct 31 06:05:21 volumio systemd[1]: Listening on triggerhappy.socket. Oct 31 06:05:21 volumio systemd[1]: Started Daily Cleanup of Temporary Directories. Oct 31 06:05:21 volumio systemd[1]: Listening on D-Bus System Message Bus Socket. Oct 31 06:05:21 volumio systemd[1]: Started Daily man-db regeneration. Oct 31 06:05:21 volumio systemd[1]: Started Daily apt download activities. Oct 31 06:05:21 volumio ifup[623]: command failed: Input/output error (-5) Oct 31 06:05:21 volumio sh[622]: command failed: Input/output error (-5) Oct 31 06:05:21 volumio systemd[1]: Started Daily apt upgrade and clean activities. Oct 31 06:05:21 volumio systemd[1]: Reached target Timers. Oct 31 06:05:21 volumio systemd[1]: Listening on lircd.socket. Oct 31 06:05:21 volumio systemd[1]: Reached target Sockets. Oct 31 06:05:21 volumio systemd[1]: Reached target Basic System. Oct 31 06:05:21 volumio systemd[1]: Condition check resulted in Volumio SSH enabler being skipped. Oct 31 06:05:21 volumio systemd[1]: Started Manage Sound Card State (restore and store). Oct 31 06:05:21 volumio alsactl[652]: alsactl 1.1.8 daemon started Oct 31 06:05:21 volumio systemd[1]: Started volumio-remote-updater.service. Oct 31 06:05:21 volumio systemd[1]: Started UPnP Renderer front-end to MPD. Oct 31 06:05:21 volumio systemd[1]: Condition check resulted in Copy user wpa_supplicant.conf being skipped. Oct 31 06:05:21 volumio systemd[1]: Starting Wireless Services... Oct 31 06:05:21 volumio systemd[1]: Starting DHCP Client Daemon... Oct 31 06:05:21 volumio systemd[1]: Starting Avahi mDNS/DNS-SD Stack... Oct 31 06:05:21 volumio systemd[1]: Starting triggerhappy global hotkey daemon... Oct 31 06:05:21 volumio alsactl[652]: Found hardware: "AML-AUGESOUND-V" "" "" "" "" Oct 31 06:05:21 volumio alsactl[652]: Hardware is initialized using a generic method Oct 31 06:05:21 volumio systemd[1]: Starting lircd(8) initialization helper tool... Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:SPDIFIN audio samplerate:0' : Operation not permitted Oct 31 06:05:21 volumio kernel: [snd-soc]: spdif_set_cs(), status0=0x2000100 Oct 31 06:05:21 volumio kernel: [snd-soc]: Fine spdif sysclk setting range(0~2000000), 5644750 Oct 31 06:05:21 volumio kernel: [snd-soc]: aml_audio_set_spdif_mute(), no pinctrl Oct 31 06:05:21 volumio kernel: [snd-soc]: spdif_set_cs(), status0=0x0 Oct 31 06:05:21 volumio kernel: [snd-soc]: T7_FRHDMIRX, can't switch mode Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:SPDIFIN Audio Type:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:ATV audio stable:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:AV audio stable:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN audio stable:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN audio samplerate:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN audio channels:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN audio allocation:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN audio format:0' : Operation not permitted Oct 31 06:05:21 volumio ifup[623]: command failed: Input/output error (-5) Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN Audio Packet:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN Audio bit width:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN NONAUDIO:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:HDMIIN Audio Type:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:TVIN VIDEO MIN DELAY:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:TVIN VIDEO MAX DELAY:0' : Operation not permitted Oct 31 06:05:21 volumio kernel: [snd-soc]: Fine tdm clk setting range (0~2000000), 11289500 Oct 31 06:05:21 volumio kernel: [snd-soc]: tdmout_gain_set, id: 1, gain: 0x0 Oct 31 06:05:21 volumio kernel: [snd-soc]: arc_enable enable: 0, type -107, is_reset_hpd 0 Oct 31 06:05:21 volumio systemd[1]: Started Volumio Log Rotation Service. Oct 31 06:05:21 volumio systemd[1]: Started Volumio Iptables Module. Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_update_reg reg 0x40, mask 0x80000000, value 0x0 Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x42, value 0xfffffff9 Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x40, value 0x14830490 Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x41, value 0x40011508 Oct 31 06:05:21 volumio thd[668]: Unable to parse trigger line: Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 1, band_id = 10377 Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: vad_set_enable_enum, p_vad->end = 0, set value 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: out of value, fixed it Oct 31 06:05:21 volumio systemd[1]: Started D-Bus System Message Bus. Oct 31 06:05:21 volumio thd[668]: Unable to parse trigger line: Oct 31 06:05:21 volumio thd[668]: Unable to parse trigger line: KEY_MIN_INTERESTING 1 /usr/local/bin/volumio volume toggle Oct 31 06:05:21 volumio thd[668]: Unable to parse trigger line: Oct 31 06:05:21 volumio thd[668]: Found socket passed from systemd Oct 31 06:05:21 volumio thd[668]: Device /dev/input/event15 not suitable. Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:AML chip id:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[652]: /usr/sbin/alsactl: set_control:1461Cannot write control '2:0:0:Media Video Delay:0' : Operation not permitted Oct 31 06:05:21 volumio kernel: [snd-soc]: id=0 set inskew=0 Oct 31 06:05:21 volumio kernel: [snd-soc]: clk_set_force_mpll: force_mpll_clk = 0 Oct 31 06:05:21 volumio systemd[1]: Starting WPA supplicant... Oct 31 06:05:21 volumio systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling... Oct 31 06:05:21 volumio systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped. Oct 31 06:05:21 volumio systemd[1]: Starting Save/Restore Sound Card State... Oct 31 06:05:21 volumio systemd[1]: Starting Login Service... Oct 31 06:05:21 volumio kernel: 8021q: 802.1Q VLAN Support v1.8 Oct 31 06:05:21 volumio thd[668]: Device /dev/input/event14 not suitable. Oct 31 06:05:21 volumio alsactl[684]: Found hardware: "AML-AUGESOUND-V" "" "" "" "" Oct 31 06:05:21 volumio alsactl[684]: Hardware is initialized using a generic method Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:SPDIFIN audio samplerate:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:SPDIFIN Audio Type:0' : Operation not permitted Oct 31 06:05:21 volumio kernel: [snd-soc]: spdif_set_cs(), status0=0x2000100 Oct 31 06:05:21 volumio kernel: [snd-soc]: Fine spdif sysclk setting range(0~2000000), 5644750 Oct 31 06:05:21 volumio kernel: [snd-soc]: aml_audio_set_spdif_mute(), no pinctrl Oct 31 06:05:21 volumio kernel: [snd-soc]: spdif_set_cs(), status0=0x0 Oct 31 06:05:21 volumio kernel: [snd-soc]: T7_FRHDMIRX, can't switch mode Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:ATV audio stable:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:AV audio stable:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN audio stable:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN audio samplerate:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN audio channels:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN audio allocation:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN audio format:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN Audio Packet:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN Audio bit width:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN NONAUDIO:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:HDMIIN Audio Type:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:TVIN VIDEO MIN DELAY:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:TVIN VIDEO MAX DELAY:0' : Operation not permitted Oct 31 06:05:21 volumio kernel: [snd-soc]: Fine tdm clk setting range (0~2000000), 11289500 Oct 31 06:05:21 volumio kernel: [snd-soc]: tdmout_gain_set, id: 1, gain: 0x0 Oct 31 06:05:21 volumio kernel: [snd-soc]: arc_enable enable: 0, type -107, is_reset_hpd 0 Oct 31 06:05:21 volumio thd[668]: Device /dev/input/event8 not suitable. Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_update_reg reg 0x40, mask 0x80000000, value 0x0 Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x42, value 0xfffffff9 Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x40, value 0x14830490 Oct 31 06:05:21 volumio kernel: [snd-soc]: hdmirx_arc_write_reg reg 0x41, value 0x40011508 Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 1, band_id = 10377 Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: Error: parma_num = 0, band_id = 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: vad_set_enable_enum, p_vad->end = 0, set value 0 Oct 31 06:05:21 volumio kernel: [snd-soc]: out of value, fixed it Oct 31 06:05:21 volumio kernel: [snd-soc]: id=0 set inskew=0 Oct 31 06:05:21 volumio kernel: [snd-soc]: clk_set_force_mpll: force_mpll_clk = 0 Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:AML chip id:0' : Operation not permitted Oct 31 06:05:21 volumio alsactl[684]: /usr/sbin/alsactl: set_control:1461: Cannot write control '2:0:0:Media Video Delay:0' : Operation not permitted Oct 31 06:05:21 volumio avahi-daemon[666]: Found user 'avahi' (UID 111) and group 'avahi' (GID 113). Oct 31 06:05:21 volumio avahi-daemon[666]: Successfully dropped root privileges. Oct 31 06:05:21 volumio avahi-daemon[666]: avahi-daemon 0.7 starting up. Oct 31 06:05:21 volumio systemd-logind[687]: New seat seat0. Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:21 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:21 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:21 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:21 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:21 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio systemd[1]: Started triggerhappy global hotkey daemon. Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio systemd[1]: Started Save/Restore Sound Card State. Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event16 (input_btrcu) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event3 (ir_keypad) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event1 (ir_keypad1) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event2 (ir_keypad1) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event0 (gpio_keypad) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event6 (input_ethrcu) Oct 31 06:05:21 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:21 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:21 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:21 volumio kernel: Oct 31 06:05:21 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:21 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:21 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:21 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:21 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event10 (MOSART Semi. Mi Wireless Combo) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event12 (MOSART Semi. Mi Wireless Combo Consumer Control) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event13 (MOSART Semi. Mi Wireless Combo System Control) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event17 (vad_keypad) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event4 (cec_input) Oct 31 06:05:21 volumio systemd-logind[687]: Watching system buttons on /dev/input/event5 (input_hdmirx) Oct 31 06:05:22 volumio systemd[1]: Condition check resulted in /sys/subsystem/net/devices/wlan0 being skipped. Oct 31 06:05:22 volumio systemd[1]: Reached target Sound Card. Oct 31 06:05:22 volumio systemd[1]: Started ifup for wlan0. Oct 31 06:05:22 volumio kernel: meson8b-dwmac fdc00000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) Oct 31 06:05:22 volumio dhcpcd[664]: no interfaces have a carrier Oct 31 06:05:22 volumio kernel: meson8b-dwmac fdc00000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 Oct 31 06:05:22 volumio dhcpcd[664]: no interfaces have a carrier Oct 31 06:05:22 volumio dhcpcd[664]: forked to background, child pid 792 Oct 31 06:05:22 volumio dhcpcd[664]: forked to background, child pid 792 Oct 31 06:05:22 volumio kernel: meson8b-dwmac fdc00000.ethernet eth0: No Safety Features support found Oct 31 06:05:22 volumio kernel: meson8b-dwmac fdc00000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported Oct 31 06:05:22 volumio kernel: meson8b-dwmac fdc00000.ethernet eth0: registered PTP clock Oct 31 06:05:22 volumio systemd[1]: Started DHCP Client Daemon. Oct 31 06:05:22 volumio wpa_supplicant[682]: Successfully initialized wpa_supplicant Oct 31 06:05:22 volumio avahi-daemon[666]: Successfully called chroot(). Oct 31 06:05:22 volumio avahi-daemon[666]: Successfully dropped remaining capabilities. Oct 31 06:05:22 volumio kernel: meson8b-dwmac fdc00000.ethernet eth0: configuring for phy/rgmii link mode Oct 31 06:05:22 volumio sh[622]: eth0: waiting for carrier Oct 31 06:05:22 volumio dhcpcd[650]: eth0: waiting for carrier Oct 31 06:05:22 volumio avahi-daemon[666]: No service file found in /etc/avahi/services. Oct 31 06:05:22 volumio sh[622]: eth0: carrier acquired Oct 31 06:05:22 volumio dhcpcd[650]: eth0: carrier acquired Oct 31 06:05:22 volumio dhcpcd[792]: dummy0: waiting for carrier Oct 31 06:05:22 volumio dhcpcd[792]: eth0: waiting for carrier Oct 31 06:05:22 volumio kernel: [dhd] dhd_pri_open : no mutex held Oct 31 06:05:22 volumio kernel: [dhd] dhd_pri_open : set mutex lock Oct 31 06:05:22 volumio kernel: [dhd] [wlan0] dhd_open : Enter Oct 31 06:05:22 volumio kernel: [dhd] Dongle Host Driver, version 101.10.361.34 (wlan=r892223-20230904-2)(20240912-1) drivers/net/wireless/bcmdhd compiled on Oct 24 2024 at 13:55:25 Oct 31 06:05:22 volumio kernel: [dhd] dhd_open: ######### called for ifidx=0 ######### Oct 31 06:05:22 volumio kernel: [dhd] [wlan0] wl_android_wifi_on : in g_wifi_on=0 Oct 31 06:05:22 volumio kernel: [dhd] wifi_platform_set_power = 1, delay: 200 msec Oct 31 06:05:22 volumio kernel: [dhd] ======== PULL WL_REG_ON(-1) HIGH! ======== Oct 31 06:05:22 volumio kernel: [wireless]: [extern_wifi_set_enable] WIFI Enable! 381 Oct 31 06:05:22 volumio systemd[1]: Started Login Service. Oct 31 06:05:22 volumio sh[622]: DUID 00:01:00:01:2e:b5:d9:b1:c8:63:14:72:5f:11 Oct 31 06:05:22 volumio sh[622]: eth0: IAID 14:72:5f:11 Oct 31 06:05:22 volumio dhcpcd[650]: DUID 00:01:00:01:2e:b5:d9:b1:c8:63:14:72:5f:11 Oct 31 06:05:22 volumio sh[622]: eth0: adding address fe80::d88d:67fe:1790:7b0 Oct 31 06:05:22 volumio dhcpcd[650]: eth0: IAID 14:72:5f:11 Oct 31 06:05:22 volumio dhcpcd[650]: eth0: adding address fe80::d88d:67fe:1790:7b0 Oct 31 06:05:22 volumio loadcpufreq[683]: Loading cpufreq kernel modules...done (none). Oct 31 06:05:22 volumio systemd[1]: Started Raise network interfaces. Oct 31 06:05:22 volumio systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling. Oct 31 06:05:22 volumio systemd[1]: Started Avahi mDNS/DNS-SD Stack. Oct 31 06:05:22 volumio systemd[1]: Started WPA supplicant. Oct 31 06:05:22 volumio systemd[1]: Starting LSB: set CPUFreq kernel parameters... Oct 31 06:05:22 volumio systemd[1]: Reached target Network. Oct 31 06:05:22 volumio systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped. Oct 31 06:05:22 volumio systemd[1]: Starting Permit User Sessions... Oct 31 06:05:22 volumio systemd[1]: Starting Network Time Service... Oct 31 06:05:22 volumio systemd[1]: Reached target Network is Online. Oct 31 06:05:22 volumio volumio-remote-updater[656]: Error: No active session Oct 31 06:05:22 volumio systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Oct 31 06:05:22 volumio systemd[1]: Starting LSB: Brings up/down network automatically... Oct 31 06:05:22 volumio systemd[1]: Starting /etc/rc.local Compatibility... Oct 31 06:05:22 volumio systemd[1]: Starting Samba NMB Daemon... Oct 31 06:05:22 volumio haveged[596]: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 8.3.0 CTV); collect: 128K Oct 31 06:05:22 volumio haveged[596]: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 12/40; sz: 15012/57848 Oct 31 06:05:22 volumio haveged[596]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.00166 Oct 31 06:05:22 volumio haveged[596]: haveged: fills: 0, generated: 0 Oct 31 06:05:22 volumio systemd[1]: Started Permit User Sessions. Oct 31 06:05:22 volumio volumio[659]: Could not open config: /tmp/upmpdcli.conf Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:22 volumio systemd[1]: upmpdcli.service: Main process exited, code=exited, status=1/FAILURE Oct 31 06:05:22 volumio systemd[1]: upmpdcli.service: Failed with result 'exit-code'. Oct 31 06:05:22 volumio systemd[1]: Started /etc/rc.local Compatibility. Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:22 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:22 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio systemd[1]: Starting Terminate Plymouth Boot Screen... Oct 31 06:05:22 volumio systemd[1]: Starting Hold until boot process finishes up... Oct 31 06:05:22 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: [dhd] sdio_sw_reset: call mmc_sw_reset Oct 31 06:05:22 volumio ntpd[823]: ntpd 4.2.8p12@1.3728-o (1): Starting Oct 31 06:05:22 volumio ntpd[823]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:103 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio systemd[1]: Started Network Time Service. Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:22 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:22 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:22 volumio kernel: init mclk is 37 MHZ Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:22 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:22 volumio kernel: meson-gx-mmc fe088000.sdio: 8 [0x1aa], TIMEOUT[0x2800] Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:22 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:22 volumio kernel: sensor_get_id@IMX290_drv.c:341 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:22 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:22 volumio kernel: Success disable mclk: 37125000 Oct 31 06:05:22 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:22 volumio systemd[1]: Received SIGRTMIN+21 from PID 261 (plymouthd). Oct 31 06:05:22 volumio systemd[1]: plymouth-quit.service: Succeeded. Oct 31 06:05:22 volumio systemd[1]: Started Terminate Plymouth Boot Screen. Oct 31 06:05:22 volumio systemd[1]: plymouth-quit-wait.service: Succeeded. Oct 31 06:05:22 volumio systemd[1]: Started Hold until boot process finishes up. Oct 31 06:05:22 volumio systemd[1]: Received SIGRTMIN+21 from PID 261 (n/a). Oct 31 06:05:22 volumio systemd[1]: Started Getty on tty1. Oct 31 06:05:22 volumio systemd[1]: Started Serial Getty on ttyS0. Oct 31 06:05:22 volumio systemd[1]: Reached target Login Prompts. Oct 31 06:05:22 volumio ifplugd(eth0)[874]: ifplugd 0.28 initializing. Oct 31 06:05:22 volumio cpufrequtils[820]: CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done. Oct 31 06:05:22 volumio systemd[1]: Started LSB: set CPUFreq kernel parameters. Oct 31 06:05:22 volumio systemd[1]: iptables.service: Succeeded. Oct 31 06:05:22 volumio lircd-setup[670]: /usr/sbin/lircd-setup:37: DeprecationWarning: The SafeConfigParser class has been renamed to ConfigParser in Python 3.2. This alias will be removed in future versions. Use ConfigParser directly instead. Oct 31 06:05:22 volumio lircd-setup[670]: parser = configparser.SafeConfigParser() Oct 31 06:05:22 volumio systemd[1]: lircd-setup.service: Succeeded. Oct 31 06:05:22 volumio systemd[1]: Started lircd(8) initialization helper tool. Oct 31 06:05:22 volumio systemd[1]: Starting Flexible IR remote input/output application support... Oct 31 06:05:22 volumio lircd-0.10.1[879]: Info: lircd: Opening log, level: Info Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Version: lircd 0.10.1 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: System info: Linux volumio 5.15.137 #1.7.1 SMP PREEMPT Thu Oct 24 14:15:48 UTC 2024 aarch64 GNU/Linux Oct 31 06:05:22 volumio kernel: [mmc]: r: b_s = 0, b_sz = 2c, f: b_s = 1c, b_sz = 24 Oct 31 06:05:22 volumio kernel: [mmc]: the final result: sel = 1, rx = 16 Oct 31 06:05:22 volumio kernel: [dhd] sdioh_start: set sd_f2_blocksize 256 Oct 31 06:05:22 volumio kernel: [dhd] dhd_bus_devreset: == Power ON == Oct 31 06:05:22 volumio kernel: [dhd] F1 signature read @0x18000000=0x1042aae8 Oct 31 06:05:22 volumio kernel: [dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4 Oct 31 06:05:22 volumio kernel: [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000 Oct 31 06:05:22 volumio kernel: [dhd] dhd_bus_devreset: making DHD_BUS_DOWN Oct 31 06:05:22 volumio kernel: [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN Oct 31 06:05:22 volumio kernel: [dhd] dhd_conf_disable_slpauto : dhd_slpauto = 1 Oct 31 06:05:22 volumio kernel: [dhd] dhd_conf_set_path_params : Final fw_path=../../../lib/firmware/brcm/fw_bcm43752a2_ag.bin Oct 31 06:05:22 volumio kernel: [dhd] dhd_conf_set_path_params : Final nv_path=../../../lib/firmware/brcm/nvram_ap6275s.txt Oct 31 06:05:22 volumio kernel: [dhd] dhd_conf_set_path_params : Final clm_path=../../../lib/firmware/brcm/clm_bcm43752a2_ag.blob Oct 31 06:05:22 volumio kernel: [dhd] dhd_conf_set_path_params : Final conf_path=../../../lib/firmware/brcm/config_bcm43752a2_ag.txt Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:22 volumio kernel: [dhd] dhd_os_get_img_fwreq: ../../../lib/firmware/brcm/config_bcm43752a2_ag.txt (30 bytes) open success Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:22 volumio kernel: [dhd] dhd_conf_read_others : wl_preinit = pm2_sleep_ret=2000 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:22 volumio kernel: [dhd] dhd_os_get_img_fwreq: ../../../lib/firmware/brcm/fw_bcm43752a2_ag.bin (820071 bytes) open success Oct 31 06:05:22 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:22 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:22 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:22 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:22 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:22 volumio lircd-0.10.1[879]: Info: Initial device: auto Oct 31 06:05:22 volumio lircd-0.10.1[879]: Info: Initial device: auto Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: driver: devinput Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: output: /var/run/lirc/lircd Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Info: lircd: Opening log, level: Info Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: Using systemd fd Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: nodaemon: 1 Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Warning: Running as root Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: plugindir: /usr/lib/arm-linux-gnueabihf/lirc/plugins Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: logfile: syslog Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: immediate-init: 0 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: permission: 666 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: driver-options: Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: pidfile: /var/run/lirc/lircd.pid Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: listen: 0 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: connect: (null) Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: userelease: 0 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: effective_user: (null) Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: release_suffix: _EVUP Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: allow_simulate: 0 Oct 31 06:05:22 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: repeat_max: 600 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: configfile: /etc/lirc/lircd.conf Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Info: Using remote: devinput-64. Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Options: dynamic_codes: (null) Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Current driver: devinput Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Driver API version: 4 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Driver version: 0.10.0 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Driver info: See file:///usr/share/doc/lirc/plugindocs/devinput.html Oct 31 06:05:22 volumio lircd-0.10.1[879]: Info: lircd: Opening log, level: Info Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: Using systemd fd Oct 31 06:05:22 volumio lircd-0.10.1[879]: Warning: Running as root Oct 31 06:05:22 volumio lircd-0.10.1[879]: Info: Using remote: devinput-64. Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_MISC Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_MISC Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_MOUSE Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_SOUTH Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_MOUSE Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_TOOL_PEN Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_TRIGGER Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_TRIGGER_HAPPY1 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_SOUTH Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_TOOL_PEN Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_TRIGGER Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_WHEEL Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Info: Using remote: devinput-32. Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_TRIGGER_HAPPY1 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-64: Multiple values for same code: BTN_WHEEL Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio lircd-0.10.1[879]: Info: Using remote: devinput-32. Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_MISC Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_MISC Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_MOUSE Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_SOUTH Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_MOUSE Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_TOOL_PEN Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_TRIGGER Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_TRIGGER_HAPPY1 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_SOUTH Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_TOOL_PEN Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_TRIGGER Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_WHEEL Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_TRIGGER_HAPPY1 Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: /etc/lirc/lircd.conf.d/devinput.lircd.conf: devinput-32: Multiple values for same code: BTN_WHEEL Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio lircd[879]: lircd-0.10.1[879]: Notice: lircd(devinput) ready, using /var/run/lirc/lircd Oct 31 06:05:22 volumio lircd-0.10.1[879]: Notice: lircd(devinput) ready, using /var/run/lirc/lircd Oct 31 06:05:22 volumio systemd[1]: Started Flexible IR remote input/output application support. Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:22 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:22 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:22 volumio kernel: Oct 31 06:05:22 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:22 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:22 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:22 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:22 volumio nmbd[835]: [2024/10/31 06:05:22.854351, 0] ../source3/nmbd/asyncdns.c:158(start_async_dns) Oct 31 06:05:22 volumio nmbd[835]: started asyncdns process 882 Oct 31 06:05:22 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:22 volumio kernel: [dhd] dhd_os_get_img_fwreq: ../../../lib/firmware/brcm/nvram_ap6275s.txt (8358 bytes) open success Oct 31 06:05:22 volumio kernel: [dhd] # AP6275S_NVRAM_V1.3_20200922 Oct 31 06:05:22 volumio kernel: [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. Oct 31 06:05:22 volumio wireless.js[661]: Cleaning previous... Oct 31 06:05:22 volumio kernel: [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) Oct 31 06:05:22 volumio kernel: [dhd] bcmsdh_oob_intr_register: HW_OOB irq=126 flags=0x4 Oct 31 06:05:22 volumio kernel: [dhd] dhd_dpc_thread: set dhd_dpc_prio 98 Oct 31 06:05:22 volumio kernel: [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3 Oct 31 06:05:23 volumio kernel: [dhd] wlc_ver_major 12, wlc_ver_minor 1 Oct 31 06:05:23 volumio kernel: [dhd] dhd_preinit_ioctls: preinit_status IOVAR not supported, use legacy preinit Oct 31 06:05:23 volumio kernel: [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1 Oct 31 06:05:23 volumio kernel: [dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=10, TCPDATA_INFO_MAXNUM=10 Oct 31 06:05:23 volumio kernel: [dhd] dhd_legacy_preinit_ioctls: use firmware generated mac_address 10:2c:6b:10:d7:84 Oct 31 06:05:23 volumio kernel: [dhd] dhd_os_get_img_fwreq: ../../../lib/firmware/brcm/clm_bcm43752a2_ag.blob (28865 bytes) open success Oct 31 06:05:23 volumio kernel: [dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data ----- Oct 31 06:05:23 volumio kernel: [dhd] dhd_check_current_clm_data: ----- This FW is included CLM data ----- Oct 31 06:05:23 volumio kernel: [dhd] Firmware up: op_mode=0x0005, MAC=10:2c:6b:10:d7:84 Oct 31 06:05:23 volumio kernel: [dhd] dhd_legacy_preinit_ioctls: event_log_max_sets: 26 ret: 0 Oct 31 06:05:23 volumio kernel: [dhd] arp_enable:1 arp_ol:0 Oct 31 06:05:23 volumio kernel: [dhd] Driver: 101.10.361.34 (wlan=r892223-20230904-2)(20240912-1) [dhd] Firmware: wl0: Nov 12 2021 12:02:30 version 18.35.387.23.88 (ga9604e34) FWID 01-16e134aa [dhd] CLM: 9.9.5_SS (2019-12-04 01:26:12) Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:23 volumio kernel: [dhd] dhd_txglom_enable: enable 1 Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:23 volumio kernel: [dhd] dhd_conf_set_txglom_params : txglom_mode=copy Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:23 volumio kernel: [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0 Oct 31 06:05:23 volumio kernel: [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1 Oct 31 06:05:23 volumio kernel: [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300 Oct 31 06:05:23 volumio kernel: [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1 Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:23 volumio kernel: [dhd] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:23 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:23 volumio kernel: [dhd] dhd_pno_init: Support Android Location Service Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:23 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:23 volumio kernel: [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 Oct 31 06:05:23 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:23 volumio kernel: [dhd] dhd_rtt_init : FTM is not supported Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: [dhd] dhd_rtt_init EXIT, err = 0 Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: [dhd] dhd_legacy_preinit_ioctls: Monitor mode is enabled in FW cap Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:23 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:23 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:23 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:23 volumio kernel: [dhd] [INIT] logset:8 is preserve/chatty Oct 31 06:05:23 volumio kernel: [dhd] [INIT] logset:10 is preserve/chatty Oct 31 06:05:23 volumio kernel: [dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported Oct 31 06:05:23 volumio kernel: [dhd] failed to start ecounters Oct 31 06:05:23 volumio kernel: [dhd] dhd_ecounter_configure Ecounters start failed Oct 31 06:05:23 volumio kernel: [dhd] dhd_conf_set_country : set country CN, revision 0 Oct 31 06:05:23 volumio kernel: [dhd] dhd_conf_set_country : Country code: CN (CN/0) Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] wl_android_wifi_on : Success Oct 31 06:05:23 volumio kernel: [dhd] CFG80211-ERROR) __wl_update_wiphybands : error get bw_cap 6g (-13) Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:23 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:23 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:23 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:23 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:23 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] wl_cfg80211_up : Roam channel cache enabled Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] dhd_open : Exit ret=0 Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] dhd_pri_open : tx queue started Oct 31 06:05:23 volumio kernel: [dhd] dhd_pri_open : mutex is released. Oct 31 06:05:23 volumio dhcpcd[792]: wlan0: waiting for carrier Oct 31 06:05:23 volumio kernel: [dhd] dhd_static_if_open : no mutex held Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio sh[622]: ipv6_addaddr1: Permission denied Oct 31 06:05:23 volumio dhcpcd[650]: ipv6_addaddr1: Permission denied Oct 31 06:05:23 volumio kernel: [dhd] dhd_static_if_open : set mutex lock Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: [dhd] [wlan1] dhd_static_if_open : Enter Oct 31 06:05:23 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] dhd_open : Primary net_device is already up Oct 31 06:05:23 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:23 volumio kernel: [dhd] CFG80211-ERROR) wl_cfg80211_deinit_p2p_discovery : Disabling P2P Discovery Interface Oct 31 06:05:23 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:23 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized Oct 31 06:05:23 volumio kernel: Oct 31 06:05:23 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:23 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:23 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:23 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:23 volumio kernel: [dhd] dhd_wlfc_enable: ret=0 Oct 31 06:05:23 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:23 volumio kernel: [dhd] [wlan1] dhd_static_if_open : Exit ret=0 Oct 31 06:05:23 volumio kernel: [dhd] dhd_static_if_open : mutex is released. Oct 31 06:05:23 volumio dhcpcd[792]: wlan1: waiting for carrier Oct 31 06:05:23 volumio dhcpcd[792]: eth0: carrier acquired Oct 31 06:05:23 volumio ifplugd(eth0)[874]: Using interface eth0/C8:63:14:72:5F:11 with driver (version: Jan_2016) Oct 31 06:05:23 volumio ifplugd(eth0)[874]: Using detection mode: SIOCETHTOOL Oct 31 06:05:23 volumio sh[622]: eth0: carrier lost Oct 31 06:05:23 volumio volumio-remote-updater[656]: [2024-10-31 06:05:23] [info] asio async_connect error: system:111 (Connection refused) Oct 31 06:05:23 volumio volumio-remote-updater[656]: [2024-10-31 06:05:23] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Oct 31 06:05:23 volumio volumio-remote-updater[656]: [2024-10-31 06:05:23] [error] handle_connect error: Underlying Transport Error Oct 31 06:05:23 volumio ifplugd(eth0)[874]: Initialization complete, link beat not detected. Oct 31 06:05:23 volumio ntpd[854]: proto: precision = 1.166 usec (-20) Oct 31 06:05:23 volumio nmbd[835]: [2024/10/31 06:05:23.824108, 0] ../lib/util/become_daemon.c:149(daemon_status) Oct 31 06:05:23 volumio nmbd[835]: daemon_status: STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ... Oct 31 06:05:23 volumio nmbd[835]: [2024/10/31 06:05:23.824245, 0] ../source3/nmbd/nmbd_subnetdb.c:254(create_subnets) Oct 31 06:05:23 volumio nmbd[835]: NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6). Oct 31 06:05:23 volumio dhcpcd[650]: eth0: carrier lost Oct 31 06:05:23 volumio avahi-daemon[666]: Network interface enumeration completed. Oct 31 06:05:23 volumio avahi-daemon[666]: Server startup complete. Host name is volumio.local. Local service cookie is 2660161904. Oct 31 06:05:23 volumio dhcpcd[792]: DUID 00:01:00:01:2e:b5:d9:b1:c8:63:14:72:5f:11 Oct 31 06:05:23 volumio dhcpcd[792]: eth0: IAID 14:72:5f:11 Oct 31 06:05:23 volumio dhcpcd[792]: eth0: adding address fe80::d88d:67fe:1790:7b0 Oct 31 06:05:23 volumio ntpd[854]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Oct 31 06:05:23 volumio ntpd[854]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2022-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Oct 31 06:05:23 volumio ntpd[854]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): expired less than 674 days ago Oct 31 06:05:23 volumio ntpd[854]: Listen and drop on 0 v6wildcard [::]:123 Oct 31 06:05:23 volumio ntpd[854]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Oct 31 06:05:23 volumio dhcpcd[792]: ipv6_addaddr1: Permission denied Oct 31 06:05:23 volumio dhcpcd[792]: eth0: carrier lost Oct 31 06:05:23 volumio ntpd[854]: Listen normally on 2 lo 127.0.0.1:123 Oct 31 06:05:23 volumio ntpd[854]: Listening on routing socket on fd #19 for interface updates Oct 31 06:05:23 volumio ntpd[854]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Oct 31 06:05:23 volumio ntpd[854]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Oct 31 06:05:23 volumio dhcpcd[792]: dummy0: carrier acquired Oct 31 06:05:23 volumio sudo[890]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Oct 31 06:05:23 volumio sudo[890]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:23 volumio dhcpcd[792]: dummy0: IAID 26:d5:aa:7d Oct 31 06:05:23 volumio dhcpcd[792]: dummy0: adding address fe80::8ca7:92cd:5434:caaa Oct 31 06:05:23 volumio dhcpcd[792]: ipv6_addaddr1: Permission denied Oct 31 06:05:23 volumio dhcpcd[792]: wlan0: carrier acquired Oct 31 06:05:23 volumio sudo[890]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:23 volumio dhcpcd[792]: wlan0: IAID 6b:10:d7:84 Oct 31 06:05:23 volumio dhcpcd[792]: wlan0: IAID conflicts with one assigned to wlan1 Oct 31 06:05:23 volumio dhcpcd[792]: wlan0: adding address fe80::9402:ada6:769d:1475 Oct 31 06:05:23 volumio dhcpcd[792]: ipv6_addaddr1: Permission denied Oct 31 06:05:23 volumio dhcpcd[792]: wlan1: carrier acquired Oct 31 06:05:23 volumio dhcpcd[792]: wlan1: IAID 6b:10:d7:84 Oct 31 06:05:23 volumio dhcpcd[792]: wlan1: IAID conflicts with one assigned to wlan0 Oct 31 06:05:23 volumio dhcpcd[792]: wlan1: adding address fe80::d425:db45:52a4:1f90 Oct 31 06:05:23 volumio dhcpcd[792]: ipv6_addaddr1: Permission denied Oct 31 06:05:23 volumio sudo[926]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Oct 31 06:05:23 volumio sudo[926]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] dhd_pri_stop : tx queue stopped Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] dhd_stop : Enter Oct 31 06:05:23 volumio kernel: [dhd] dhd_stop: ######### called for ifidx=0 ######### Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] dhd_stop : static if operational. skip chip reset. Oct 31 06:05:23 volumio kernel: [dhd] [wlan0] dhd_stop : Exit Oct 31 06:05:23 volumio dhcpcd[792]: wlan0: carrier lost Oct 31 06:05:23 volumio sudo[926]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:23 volumio ifplugd[828]: Network Interface Plugging Daemon...start eth0...done. Oct 31 06:05:23 volumio systemd[1]: Started LSB: Brings up/down network automatically. Oct 31 06:05:23 volumio sh[750]: wlan0=wlan0 Oct 31 06:05:23 volumio dhcpcd[792]: wlan1: soliciting an IPv6 router Oct 31 06:05:23 volumio wireless.js[661]: Stopped aP Oct 31 06:05:24 volumio sudo[963]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Oct 31 06:05:24 volumio sudo[963]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:24 volumio kernel: [dhd] dhd_pri_open : no mutex held Oct 31 06:05:24 volumio kernel: [dhd] dhd_pri_open : set mutex lock Oct 31 06:05:24 volumio kernel: [dhd] [wlan0] dhd_open : Primary net_device is already up Oct 31 06:05:24 volumio kernel: [dhd] [wlan0] dhd_pri_open : tx queue started Oct 31 06:05:24 volumio kernel: [dhd] dhd_pri_open : mutex is released. Oct 31 06:05:24 volumio dhcpcd[792]: wlan0: carrier acquired Oct 31 06:05:24 volumio sudo[963]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:24 volumio dhcpcd[792]: wlan0: IAID 6b:10:d7:84 Oct 31 06:05:24 volumio dhcpcd[792]: wlan0: IAID conflicts with one assigned to wlan1 Oct 31 06:05:24 volumio sudo[966]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg get Oct 31 06:05:24 volumio sudo[966]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:24 volumio sudo[966]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:24 volumio dhcpcd[792]: dummy0: soliciting a DHCP lease Oct 31 06:05:24 volumio sudo[973]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Oct 31 06:05:24 volumio sudo[973]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:24 volumio sudo[973]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:24 volumio sudo[975]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw wlan0 scan Oct 31 06:05:24 volumio sudo[975]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:24 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:24 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:24 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:24 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:24 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:24 volumio ntpd[854]: error resolving pool 0.debian.pool.ntp.org: System error (-11) Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:24 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:24 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio dhcpcd[792]: wlan0: soliciting a DHCP lease Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX415_drv.c:372 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:24 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:24 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:24 volumio kernel: init mclk is 37 MHZ Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:24 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:24 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX307_drv.c:378 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:24 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:24 volumio kernel: Success disable mclk: 37125000 Oct 31 06:05:24 volumio kernel: init mclk is 37 MHZ Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:24 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:24 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x1a Oct 31 06:05:24 volumio kernel: sensor_get_id@IMX335_drv.c:393 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to read sensor imx335 id, 0 Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:24 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:24 volumio kernel: Success disable mclk: 37125000 Oct 31 06:05:24 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:24 volumio dhcpcd[792]: wlan1: soliciting a DHCP lease Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:24 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:24 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x3c Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x3c Oct 31 06:05:24 volumio kernel: sensor_get_id@OV5640_drv.c:154 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id: Failed to 5640 sensor id 0 Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:24 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:24 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:24 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:24 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:24 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:24 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:24 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:24 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:24 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:24 volumio kernel: sensor_get_id_real@OV5675_drv.c:393 GENERIC(CRIT) : Oct 31 06:05:24 volumio kernel: sensor_get_id_real: Failed to read sensor id Oct 31 06:05:24 volumio kernel: Oct 31 06:05:24 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:24 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:24 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:24 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:24 volumio dhcpcd[792]: wlan0: soliciting an IPv6 router Oct 31 06:05:24 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:24 volumio dhcpcd[792]: dummy0: soliciting an IPv6 router Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:25 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:25 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:25 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:25 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:25 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:25 volumio ntpd[854]: error resolving pool 1.debian.pool.ntp.org: System error (-11) Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:25 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:25 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:25 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:25 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:25 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:25 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:25 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:25 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:25 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:25 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:25 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:25 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:25 volumio kernel: Oct 31 06:05:25 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:25 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:25 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:25 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:25 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:26 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:26 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:26 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:26 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:26 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:26 volumio ntpd[854]: error resolving pool 2.debian.pool.ntp.org: System error (-11) Oct 31 06:05:26 volumio systemd[1]: systemd-rfkill.service: Succeeded. Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:26 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:26 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x36 Oct 31 06:05:26 volumio kernel: sensor_get_id@OV08a10_drv.c:450 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:26 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:26 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:26 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:26 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:26 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:26 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:26 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:26 volumio kernel: system_i2c_write:failed to write reg data: rc -6, saddr 0x2b Oct 31 06:05:26 volumio kernel: system_i2c_write:failed to write reg data: rc -6, saddr 0x2b Oct 31 06:05:26 volumio sudo[975]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:26 volumio kernel: system_i2c_write:failed to write reg data: rc -6, saddr 0x2b Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x2b Oct 31 06:05:26 volumio wireless.js[661]: SETTING APPROPRIATE REG DOMAIN: CN Oct 31 06:05:26 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x2b Oct 31 06:05:26 volumio kernel: sensor_get_id@LT6911C_drv.c:139 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: sensor_get_id: Failed to read sensor id 0 Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio kernel: sensor_detect_lt6911:0 Oct 31 06:05:26 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:26 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:26 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:26 volumio kernel: soc_sensor_probe@soc_sensor.c:856 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: register v4l2 sensor device. result 0, sd 0x19f2d30 sd->dev 0xe43410 Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio sudo[981]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Oct 31 06:05:26 volumio sudo[981]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:26 volumio sudo[981]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:26 volumio kernel: arm_isp fa000000.isp: assigned reserved memory node linux,isp_cma Oct 31 06:05:26 volumio kernel: AM_SC: am_sc_parse_dt: rs idx info: name: isp_sc0 Oct 31 06:05:26 volumio kernel: AM_SC: am_sc_parse_dt:rs info: irq: 60, ds0 Oct 31 06:05:26 volumio sudo[983]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg set CN Oct 31 06:05:26 volumio sudo[983]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:26 volumio kernel: AM_SC1: am_sc1_parse_dt: rs idx info: name: isp_sc1 Oct 31 06:05:26 volumio kernel: AM_SC1: am_sc1_parse_dt:rs info: irq: 61, ds1 Oct 31 06:05:26 volumio kernel: AM_SC2: am_sc2_parse_dt: rs idx info: name: isp_sc2 Oct 31 06:05:26 volumio kernel: AM_SC2: am_sc2_parse_dt:rs info: irq: 62, ds2 Oct 31 06:05:26 volumio kernel: AM_SC3: am_sc3_parse_dt: rs idx info: name: isp_crop Oct 31 06:05:26 volumio kernel: AM_SC3: am_sc3_parse_dt:rs info: irq: 63, ds3 Oct 31 06:05:26 volumio kernel: isp_clk_enable@main_kernel_juno_v4l2.c:830 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: get clk isp:666666656, mipi:199999997 Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio sudo[983]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:26 volumio kernel: interrupt comes in (irq = 68) without app handler, status: 0x200, pusle mode:0 Oct 31 06:05:26 volumio wireless.js[661]: SUCCESSFULLY SET NEW REGDOMAIN: CN Oct 31 06:05:26 volumio kernel: isp_platform_probe@main_kernel_juno_v4l2.c:1060 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: cam num:2 Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio wireless.js[661]: Start wireless flow Oct 31 06:05:26 volumio wireless.js[661]: Stopped hotspot (if there).. Oct 31 06:05:26 volumio kernel: acamera_fw_init@acamera_fw.c:110 GENERIC(CRIT) : Oct 31 06:05:26 volumio kernel: seamless:0 Oct 31 06:05:26 volumio kernel: Oct 31 06:05:26 volumio sudo[991]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Oct 31 06:05:26 volumio sudo[991]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:26 volumio kernel: init mclk is 12 MHZ Oct 31 06:05:26 volumio sudo[991]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: start to probe Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm isp slave addr 0x6c, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_addr_type 2, rtn 0 Oct 31 06:05:26 volumio sudo[993]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Oct 31 06:05:26 volumio sudo[993]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe:arm reg_data_type 1, rtn 0 Oct 31 06:05:26 volumio kernel: arm_sensor_i2c_probe: success get link device:phy-csi Oct 31 06:05:26 volumio kernel: [dhd] [wlan0] dhd_pri_stop : tx queue stopped Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 0 info: name: csi2_phy0 Oct 31 06:05:26 volumio dhcpcd[792]: wlan0: carrier lost Oct 31 06:05:26 volumio kernel: [dhd] [wlan0] dhd_stop : Enter Oct 31 06:05:26 volumio kernel: [dhd] dhd_stop: ######### called for ifidx=0 ######### Oct 31 06:05:26 volumio kernel: [dhd] [wlan0] dhd_stop : static if operational. skip chip reset. Oct 31 06:05:26 volumio kernel: [dhd] [wlan0] dhd_stop : Exit Oct 31 06:05:26 volumio sudo[993]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:26 volumio wireless.js[661]: DHCP IP Oct 31 06:05:26 volumio wpa_supplicant[997]: Successfully initialized wpa_supplicant Oct 31 06:05:26 volumio wireless.js[661]: Start ap Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 1 info: name: csi2_phy1 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 2 info: name: csi2_phy2 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 3 info: name: csi2_phy3 Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 4 info: name: aphy_reg Oct 31 06:05:26 volumio sudo[1003]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/dhcpcd Oct 31 06:05:26 volumio sudo[1003]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 5 info: name: csi0_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 6 info: name: csi1_host Oct 31 06:05:26 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 7 info: name: csi2_host Oct 31 06:05:26 volumio dhcpcd[1011]: sending commands to master dhcpcd process Oct 31 06:05:26 volumio dhcpcd[792]: control command: /sbin/dhcpcd Oct 31 06:05:26 volumio sudo[1003]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:27 volumio kernel: AM_MIPI: am_mipi_parse_dt: rs idx 8 info: name: csi3_host Oct 31 06:05:27 volumio kernel: AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter Oct 31 06:05:27 volumio kernel: platform fe3b0000.isp-adapter: assigned reserved memory node linux,adapt_cma Oct 31 06:05:27 volumio wpa_supplicant[997]: nl80211: kernel reports: Authentication algorithm number required Oct 31 06:05:27 volumio kernel: AM_ADAP: adapter 0 alloc 32M memory Oct 31 06:05:27 volumio kernel: AM_ADAP: adapter 1 alloc 16M memory Oct 31 06:05:27 volumio kernel: AM_ADAP: adapter 2 alloc 16M memory Oct 31 06:05:27 volumio kernel: AM_ADAP: failed to get adap-buf-size from dts, use default value Oct 31 06:05:27 volumio kernel: AM_ADAP: adapter 3 alloc 24M memory Oct 31 06:05:27 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:27 volumio kernel: [dhd] dhd_pri_open : no mutex held Oct 31 06:05:27 volumio kernel: pwr_enable[0]: get_named_gpio power-enable fail Oct 31 06:05:27 volumio kernel: [dhd] dhd_pri_open : set mutex lock Oct 31 06:05:27 volumio kernel: [dhd] [wlan0] dhd_open : Primary net_device is already up Oct 31 06:05:27 volumio kernel: [dhd] [wlan0] dhd_pri_open : tx queue started Oct 31 06:05:27 volumio kernel: pwr_enable[0]: get_named_gpio power-enable fail Oct 31 06:05:27 volumio kernel: [dhd] dhd_pri_open : mutex is released. Oct 31 06:05:27 volumio dhcpcd[792]: wlan0: carrier acquired Oct 31 06:05:27 volumio dhcpcd[792]: wlan0: IAID 6b:10:d7:84 Oct 31 06:05:27 volumio dhcpcd[792]: wlan0: IAID conflicts with one assigned to wlan1 Oct 31 06:05:27 volumio dhcpcd[792]: wlan0: carrier lost Oct 31 06:05:27 volumio kernel: sensor_set_mode@LT6911C_drv.c:203 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Mode 0, Setting num: 0, RES:1920x1080 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: general_set_wdr_mode@general_func.c:494 GENERAL(CRIT) : Oct 31 06:05:27 volumio kernel: Setting Linear Binary Sequence Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: sbuf_mgr_alloc_sbuf@sbuf_func.c:174 SBUF(CRIT) : Oct 31 06:05:27 volumio kernel: sbuf: len_needed: 238148, len_alloc: 245759, len_used: 241664, page_size: 4096, buf_alloc: 000000005891da09, buf_used: 000000005891da09. Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: sbuf_calibration_init@sbuf_func.c:495 SBUF(CRIT) : Oct 31 06:05:27 volumio kernel: sbuf_calibration wdr_mode updated: 65535 -> 0. Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: lens_v4l2_subdev_init@v4l2_vcm.c:270 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Failed to initialize soc_lens. core->init failed with rc -1 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: acamera_3aalg_preset@acamera_fw.c:978 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Enter Linear Binary Preset Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: acamera_fw_init@acamera_fw.c:110 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: seamless:0 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: init mclk is 37 MHZ Oct 31 06:05:27 volumio kernel: pwr_enable[1]: get_named_gpio pwdn-sub fail Oct 31 06:05:27 volumio kernel: reset_enable[1]: get_named_gpio reset-sub fail Oct 31 06:05:27 volumio kernel: set reset fail Oct 31 06:05:27 volumio kernel: system_i2c_init:success to add i2c driver Oct 31 06:05:27 volumio kernel: system_i2c_read:Error input param Oct 31 06:05:27 volumio kernel: system_i2c_read:Error input param Oct 31 06:05:27 volumio kernel: system_i2c_read:Error input param Oct 31 06:05:27 volumio kernel: sensor_get_id@IMX290Sub_drv.c:340 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: sensor_get_id: Failed to 290sub read sensor id Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: get_cali_name_id@soc_iq.c:166 SUBDEV_IQ(CRIT) : Oct 31 06:05:27 volumio kernel: get_calibrations_imx290 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: iq_ioctl@soc_iq.c:322 SUBDEV_IQ(CRIT) : Oct 31 06:05:27 volumio kernel: soc_iq get config imx290sub according to sensor drv Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: general_set_wdr_mode@general_func.c:494 GENERAL(CRIT) : Oct 31 06:05:27 volumio kernel: Setting Linear Binary Sequence Oct 31 06:05:27 volumio kernel: [dhd] P2P interface registered Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: sbuf_mgr_alloc_sbuf@sbuf_func.c:174 SBUF(CRIT) : Oct 31 06:05:27 volumio kernel: sbuf: len_needed: 238148, len_alloc: 245759, len_used: 241664, page_size: 4096, buf_alloc: 00000000005c88ba, buf_used: 00000000005c88ba. Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: sbuf_calibration_init@sbuf_func.c:495 SBUF(CRIT) : Oct 31 06:05:27 volumio kernel: sbuf_calibration wdr_mode updated: 65535 -> 0. Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: lens_v4l2_subdev_init@v4l2_vcm.c:270 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Failed to initialize soc_lens. core->init failed with rc -1 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio wpa_supplicant[997]: nl80211: kernel reports: Registration to specific type not supported Oct 31 06:05:27 volumio kernel: acamera_3aalg_preset@acamera_fw.c:978 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Enter Linear Binary Preset Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: sensor_test_pattern@IMX290Sub_drv.c:512 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Donot skip initial sensor: 0 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_set_discovery : p2p_disc 1 error -16 Oct 31 06:05:27 volumio kernel: connection_thread@main_firmware.c:67 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: connection_thread@main_firmware.c:67 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: isp_fw_process@main_firmware.c:85 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: isp_fw_process start Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: system_i2c_write:failed to write reg data: rc -6, saddr 0x2b Oct 31 06:05:27 volumio kernel: system_i2c_write:failed to write reg data: rc -6, saddr 0x2b Oct 31 06:05:27 volumio kernel: system_i2c_write:failed to write reg data: rc -6, saddr 0x2b Oct 31 06:05:27 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x2b Oct 31 06:05:27 volumio kernel: system_i2c_read:failed to read reg data: rc -6, saddr 0x2b Oct 31 06:05:27 volumio kernel: sensor_get_id@LT6911C_drv.c:139 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: sensor_get_id: Failed to read sensor id 0 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: isp_v4l2_create_instance@isp-v4l2.c:1164 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: isp_v4l2_init ctx_id: 0 failed. Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_init_discovery : set discover error Oct 31 06:05:27 volumio kernel: connection_thread start Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: connection_thread@main_firmware.c:77 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: connection_thread stop Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_enable_discovery : init discovery error -16 Oct 31 06:05:27 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized Oct 31 06:05:27 volumio wpa_supplicant[997]: nl80211: Could not set interface 'p2p-dev-wlan0' UP Oct 31 06:05:27 volumio wpa_supplicant[997]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0 Oct 31 06:05:27 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_start_p2p_device : P2P enable discovery failed, ret=-16 Oct 31 06:05:27 volumio kernel: isp_fw_process@main_firmware.c:103 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: isp_fw_process stop Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_disable_discovery : do nothing, not initialized Oct 31 06:05:27 volumio kernel: AM_ADAP: Success deinit parse adap module Oct 31 06:05:27 volumio kernel: AM_MIPI: Success deinit parse mipi module Oct 31 06:05:27 volumio kernel: arm_sensor_i2c_remove: remove i2c sensor Oct 31 06:05:27 volumio kernel: Success disable mclk: 12000000 Oct 31 06:05:27 volumio kernel: lens_v4l2_subdev_deinit@v4l2_vcm.c:237 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Lens context pointer is negative -1 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio kernel: lens_v4l2_subdev_deinit@v4l2_vcm.c:237 GENERIC(CRIT) : Oct 31 06:05:27 volumio kernel: Lens context pointer is negative -2 Oct 31 06:05:27 volumio kernel: Oct 31 06:05:27 volumio wpa_supplicant[997]: p2p-dev-wlan0: Failed to initialize driver interface Oct 31 06:05:27 volumio kernel: [dhd] CFGP2P-ERROR) wl_cfgp2p_del_p2p_disc_if : P2P interface unregistered Oct 31 06:05:27 volumio wpa_supplicant[997]: P2P: Failed to enable P2P Device interface Oct 31 06:05:27 volumio kernel: wpa_supplicant (997) used greatest stack depth: 9600 bytes left Oct 31 06:05:27 volumio ntpd[854]: error resolving pool 3.debian.pool.ntp.org: System error (-11) Oct 31 06:05:27 volumio kernel: [drm:meson_osd_plane_async_check] *ERROR* osd0 plane info changed Oct 31 06:05:27 volumio wireless.js[661]: trying... Oct 31 06:05:28 volumio sudo[1026]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:28 volumio sudo[1026]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:28 volumio sudo[1026]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:28 volumio volumio-remote-updater[656]: [2024-10-31 06:05:28] [info] asio async_connect error: system:111 (Connection refused) Oct 31 06:05:28 volumio volumio-remote-updater[656]: [2024-10-31 06:05:28] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Oct 31 06:05:28 volumio volumio-remote-updater[656]: [2024-10-31 06:05:28] [error] handle_connect error: Underlying Transport Error Oct 31 06:05:28 volumio wireless.js[661]: trying... Oct 31 06:05:29 volumio sudo[1029]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:29 volumio sudo[1029]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:29 volumio sudo[1029]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:29 volumio dhcpcd[792]: wlan1: probing for an IPv4LL address Oct 31 06:05:29 volumio wireless.js[661]: trying... Oct 31 06:05:30 volumio sudo[1032]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:30 volumio sudo[1032]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:30 volumio sudo[1032]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:30 volumio wpa_supplicant[1024]: wlan0: Trying to associate with SSID 'Wesion_5G' Oct 31 06:05:30 volumio wpa_supplicant[1024]: nl80211: kernel reports: Authentication algorithm number required Oct 31 06:05:30 volumio kernel: [dhd] [wlan0] wl_ext_set_chanspec : channel 5g-153(0xe19b 80MHz) Oct 31 06:05:30 volumio kernel: [dhd] [wlan0] wl_conn_debug_info : Connecting with 68:77:24:51:c2:8c ssid "Wesion_5G", len (9), channel=5g-153(chan_cnt=1), sec=wpa2/psk/mfpn/aes, rssi=-47 Oct 31 06:05:30 volumio kernel: [dhd] [wlan0] wl_iw_event : Link UP with 68:77:24:51:c2:8c Oct 31 06:05:30 volumio kernel: [dhd] [wlan0] wl_ext_iapsta_link : [S] Link UP with 68:77:24:51:c2:8c Oct 31 06:05:30 volumio wpa_supplicant[1024]: wlan0: Associated with 68:77:24:51:c2:8c Oct 31 06:05:30 volumio wpa_supplicant[1024]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 Oct 31 06:05:30 volumio kernel: [dhd] [wlan0] wl_bss_connect_done : Report connect result - connection succeeded Oct 31 06:05:30 volumio kernel: [dhd] [wlan0] wl_add_keyext : key index (0) for 68:77:24:51:c2:8c Oct 31 06:05:30 volumio wpa_supplicant[1024]: wlan0: WPA: Key negotiation completed with 68:77:24:51:c2:8c [PTK=CCMP GTK=CCMP] Oct 31 06:05:30 volumio wpa_supplicant[1024]: wlan0: CTRL-EVENT-CONNECTED - Connection to 68:77:24:51:c2:8c completed [id=0 id_str=] Oct 31 06:05:30 volumio dhcpcd[792]: wlan0: carrier acquired Oct 31 06:05:30 volumio kernel: [dhd] kck: Oct 31 06:05:30 volumio kernel: [dhd] 0000: 72 99 4b dc 70 59 33 f8 6b 7c 2c 3b 31 1a d4 18 Oct 31 06:05:30 volumio kernel: [dhd] kek: Oct 31 06:05:30 volumio kernel: [dhd] 0000: d3 f6 5e d7 95 ba b4 f6 65 a5 bc dc 25 af db 91 Oct 31 06:05:30 volumio kernel: [dhd] replay_ctr: Oct 31 06:05:30 volumio kernel: [dhd] 0000: 00 00 00 00 00 00 00 02 Oct 31 06:05:30 volumio dhcpcd[792]: wlan0: IAID 6b:10:d7:84 Oct 31 06:05:30 volumio dhcpcd[792]: wlan0: IAID conflicts with one assigned to wlan1 Oct 31 06:05:30 volumio dhcpcd[792]: wlan0: rebinding lease of 192.168.30.40 Oct 31 06:05:30 volumio dhcpcd[792]: wlan0: probing address 192.168.30.40/23 Oct 31 06:05:30 volumio dhcpcd[792]: wlan0: soliciting an IPv6 router Oct 31 06:05:30 volumio wireless.js[661]: trying... Oct 31 06:05:31 volumio sudo[1036]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:31 volumio sudo[1036]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:31 volumio sudo[1036]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:31 volumio wireless.js[661]: trying... Oct 31 06:05:32 volumio sudo[1039]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:32 volumio sudo[1039]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:32 volumio sudo[1039]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:32 volumio wireless.js[661]: trying... Oct 31 06:05:33 volumio sudo[1042]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:33 volumio sudo[1042]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:33 volumio sudo[1042]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:33 volumio wireless.js[661]: trying... Oct 31 06:05:34 volumio sudo[1045]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:34 volumio sudo[1045]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:34 volumio sudo[1045]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:34 volumio wireless.js[661]: trying... Oct 31 06:05:35 volumio sudo[1048]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:35 volumio sudo[1048]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:35 volumio sudo[1048]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:35 volumio dhcpcd[792]: wlan1: using IPv4LL address 169.254.167.106 Oct 31 06:05:35 volumio avahi-daemon[666]: Joining mDNS multicast group on interface wlan1.IPv4 with address 169.254.167.106. Oct 31 06:05:35 volumio avahi-daemon[666]: New relevant interface wlan1.IPv4 for mDNS. Oct 31 06:05:35 volumio avahi-daemon[666]: Registering new address record for 169.254.167.106 on wlan1.IPv4. Oct 31 06:05:35 volumio dhcpcd[792]: wlan1: adding route to 169.254.0.0/16 Oct 31 06:05:35 volumio dhcpcd[792]: wlan1: adding default route Oct 31 06:05:35 volumio dhcpcd[792]: wlan0: leased 192.168.30.40 for 1152 seconds Oct 31 06:05:35 volumio avahi-daemon[666]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.30.40. Oct 31 06:05:35 volumio avahi-daemon[666]: New relevant interface wlan0.IPv4 for mDNS. Oct 31 06:05:35 volumio dhcpcd[792]: wlan0: adding route to 192.168.30.0/23 Oct 31 06:05:35 volumio avahi-daemon[666]: Registering new address record for 192.168.30.40 on wlan0.IPv4. Oct 31 06:05:35 volumio dhcpcd[792]: wlan0: adding default route via 192.168.31.1 Oct 31 06:05:35 volumio dhcpcd[792]: wlan1: deleting default route Oct 31 06:05:35 volumio ntpd[854]: ntpd exiting on signal 15 (Terminated) Oct 31 06:05:35 volumio systemd[1]: Stopping Network Time Service... Oct 31 06:05:35 volumio systemd[1]: ntp.service: Succeeded. Oct 31 06:05:35 volumio systemd[1]: Stopped Network Time Service. Oct 31 06:05:35 volumio systemd[1]: Starting Network Time Service... Oct 31 06:05:35 volumio ntpd[1092]: ntpd 4.2.8p12@1.3728-o (1): Starting Oct 31 06:05:35 volumio ntpd[1092]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:103 Oct 31 06:05:35 volumio systemd[1]: Started Network Time Service. Oct 31 06:05:35 volumio ntpd[1098]: proto: precision = 1.416 usec (-19) Oct 31 06:05:35 volumio ntpd[1098]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Oct 31 06:05:35 volumio ntpd[1098]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2022-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Oct 31 06:05:35 volumio ntpd[1098]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): expired less than 674 days ago Oct 31 06:05:35 volumio ntpd[1098]: Listen and drop on 0 v6wildcard [::]:123 Oct 31 06:05:35 volumio ntpd[1098]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Oct 31 06:05:35 volumio ntpd[1098]: Listen normally on 2 lo 127.0.0.1:123 Oct 31 06:05:35 volumio ntpd[1098]: Listen normally on 3 wlan0 192.168.30.40:123 Oct 31 06:05:35 volumio ntpd[1098]: Listen normally on 4 wlan1 169.254.167.106:123 Oct 31 06:05:35 volumio ntpd[1098]: Listening on routing socket on fd #21 for interface updates Oct 31 06:05:35 volumio ntpd[1098]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Oct 31 06:05:35 volumio ntpd[1098]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Oct 31 06:05:35 volumio wireless.js[661]: trying... Oct 31 06:05:36 volumio sudo[1101]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Oct 31 06:05:36 volumio sudo[1101]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:36 volumio sudo[1101]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:36 volumio wireless.js[661]: Connected to: ----Wesion_5G Oct 31 06:05:36 volumio wireless.js[661]: ---- Oct 31 06:05:36 volumio sudo[1104]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Oct 31 06:05:36 volumio sudo[1104]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:36 volumio sudo[1104]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:36 volumio wireless.js[661]: ... joined AP, wlan0 IPv4 is 192.168.30.40, ipV6 is undefined Oct 31 06:05:36 volumio wireless.js[661]: It's done! AP Oct 31 06:05:36 volumio systemd[1]: Started Wireless Services. Oct 31 06:05:36 volumio systemd[1]: Started Volumio Backend Module. Oct 31 06:05:36 volumio systemd[1]: Started Volumio Cpu Tweaker. Oct 31 06:05:36 volumio systemd[1]: Started Start Volumio Kiosk. Oct 31 06:05:36 volumio volumio-cpu-tweak[1110]: Setting RT Priority for mpd Oct 31 06:05:36 volumio volumio-cpu-tweak[1110]: pid 35's current scheduling policy: SCHED_FIFO Oct 31 06:05:36 volumio volumio-cpu-tweak[1110]: pid 35's current scheduling priority: 99 Oct 31 06:05:36 volumio volumio-cpu-tweak[1110]: Setting MPD Affinity Oct 31 06:05:36 volumio volumio-cpu-tweak[1110]: pid 3's current affinity mask: ff Oct 31 06:05:36 volumio volumio-cpu-tweak[1110]: /bin/volumio_cpu_tweak: line 27: warning: command substitution: ignored null byte in input Oct 31 06:05:36 volumio volumio-cpu-tweak[1110]: VOLUMIO CPU TWEAK: Setting CPU Governor: performance Oct 31 06:05:36 volumio systemd[1]: volumio_cpu_tweak.service: Succeeded. Oct 31 06:05:36 volumio startx[1111]: X.Org X Server 1.20.4 Oct 31 06:05:36 volumio startx[1111]: X Protocol Version 11, Revision 0 Oct 31 06:05:36 volumio startx[1111]: Build Operating System: Linux 4.19.0-18-armmp-lpae armv7l Debian Oct 31 06:05:36 volumio startx[1111]: Current Operating System: Linux volumio 5.15.137 #1.7.1 SMP PREEMPT Thu Oct 24 14:15:48 UTC 2024 aarch64 Oct 31 06:05:36 volumio startx[1111]: Kernel command line: kasan.stacktrace=off kvm-arm.mode=protected cgroup_disable=pressure bootpart=UUID=EC20-43C7 imgpart=UUID=4b498279-ddb6-49ce-87fc-6f935512cfbf datapart=UUID=2074f9aa-465c-4f72-8941-39b708e6803f imgfile=/volumio_current.sqsh uuidconfig=uEnv.txt hwdevice= rootflags=data=writeback rw rootfstype=ext4 no_console_suspend earlycon=aml-uart,0xfe078000 fsck.repair=yes net.ifnames=0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scsi_mod.scan=async xhci_hcd.quirks=0x800000 scramble_reg=0xfe02e030 gamma=0 khadas_board=VIM4 boot_source=emmc otg_device=1 logo=osd0,loaded,0x3fdeec00 vout=1080p60hz,enable panel_type=mipi_0 hdmitx=,444,8bit hdmimode=1080p60hz hdmichecksum=0xb8530000 hdr_force_mode= dolby_status= frac_rate_policy=1 osd_reverse=0 video_reverse=0 init_on_alloc=0 nn_adj_vol=0 powermode=on lcd_ctrl=0x37000083 outputmode=1080p60hz hdmitx=,444,8bit panel1_type=vbyone_1 lcd1_ctrl=0x00000000 panel2_type=lvds_1 lcd2_ctrl=0x00000000 androidboot.serialno=21a0000033 mac=c8:63:14:72:5f:11 wol_enable=0 reboot_mode=normal console=ttyS0,921600 console=tty0 fan=auto partition_type=generic Oct 31 06:05:36 volumio startx[1111]: Build Date: 18 December 2021 09:05:36AM Oct 31 06:05:36 volumio startx[1111]: xorg-server 2:1.20.4-1+deb10u4 (https://www.debian.org/support) Oct 31 06:05:36 volumio startx[1111]: Current version of pixman: 0.36.0 Oct 31 06:05:36 volumio startx[1111]: Before reporting problems, check http://wiki.x.org Oct 31 06:05:36 volumio startx[1111]: to make sure that you have the latest version. Oct 31 06:05:36 volumio startx[1111]: Markers: (--) probed, (**) from config file, (==) default setting, Oct 31 06:05:36 volumio startx[1111]: (++) from command line, (!!) notice, (II) informational, Oct 31 06:05:36 volumio startx[1111]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown. Oct 31 06:05:36 volumio startx[1111]: (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 31 06:05:36 2024 Oct 31 06:05:36 volumio startx[1111]: (==) Using system config directory "/usr/share/X11/xorg.conf.d" Oct 31 06:05:36 volumio volumio-remote-updater[656]: [2024-10-31 06:05:36] [info] asio async_connect error: system:111 (Connection refused) Oct 31 06:05:36 volumio volumio-remote-updater[656]: [2024-10-31 06:05:36] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Oct 31 06:05:36 volumio volumio-remote-updater[656]: [2024-10-31 06:05:36] [error] handle_connect error: Underlying Transport Error Oct 31 06:05:36 volumio startx[1111]: gbm: failed to open any driver (search paths /usr/lib/arm-linux-gnueabihf/dri:\$${ORIGIN}/dri:/usr/lib/dri) Oct 31 06:05:36 volumio startx[1111]: gbm: Last dlopen error: /usr/lib/dri/meson_dri.so: cannot open shared object file: No such file or directory Oct 31 06:05:36 volumio startx[1111]: failed to load driver: meson Oct 31 06:05:36 volumio ntpd[1098]: Soliciting pool server 223.255.185.2 Oct 31 06:05:37 volumio kernel: broken atomic modeset userspace detected, disabling atomic Oct 31 06:05:37 volumio kernel: [hdmitx:] drm_hdmitx_get_vrr_cap not support vrr Oct 31 06:05:37 volumio kernel: [hdmitx:] drm_hdmitx_get_vrr_cap not support vrr Oct 31 06:05:37 volumio kernel: [drm] [meson_hdmitx_encoder_atomic_disable] Oct 31 06:05:37 volumio kernel: [drm] am_meson_crtc_atomic_disable-[0]:in Oct 31 06:05:37 volumio kernel: vrr: [2]: aml_vrr_unregister_device: hdmitx_vrr 0 unregister successfully Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx_unregister_vrr ret = 0 Oct 31 06:05:37 volumio kernel: [drm] am_meson_crtc_atomic_enable-[0] in: new[1080p60hz], old[1080p60hz], vmode[4-4], uboot[0] Oct 31 06:05:37 volumio kernel: [drm] am_meson_crtc_atomic_enable-[0]: enable mode 1080p60hz final vmode 0 Oct 31 06:05:37 volumio kernel: vlock: event MODE_CHANGE_PRE 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx sub-clock: 5940000 4 1 2 6 1 1 1 1 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] config HPLL = 5940000 frac_rate = 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] config HPLL done Oct 31 06:05:37 volumio kernel: [hdmitx:] clocks_set_vid_clk_div_for_hdmi[408] div = 6 Oct 31 06:05:37 volumio kernel: [hdmitx:] configure venc Oct 31 06:05:37 volumio kernel: [hdmitx:] config_tv_enc_calc[63] vic = 16 Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx_soft_reset[1247] Oct 31 06:05:37 volumio kernel: [hdmitx:] config hdmitx IP vic = 16 cd:4 cs: 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] configure hdmitx21 Oct 31 06:05:37 volumio kernel: [hdmitx:] warn: SCDC not present, should not send 1:10 Oct 31 06:05:37 volumio kernel: [hdmitx:] set audio Oct 31 06:05:37 volumio kernel: [hdmitx:] audio_param->chs = 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_src_if = 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_n_para = 5824 Oct 31 06:05:37 volumio kernel: [hdmitx:] audio state: AUDIO_UNMUTE Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx_set_dispmode[1713] frl_rate 0 htotal 2200 cs 0 cd 4 h_unstable 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] Sink is HDMI device Oct 31 06:05:37 volumio kernel: [hdmitx:] set audio Oct 31 06:05:37 volumio kernel: [hdmitx:] audio_param->chs = 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_src_if = 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_n_para = 5824 Oct 31 06:05:37 volumio kernel: [hdmitx:] audio state: AUDIO_UNMUTE Oct 31 06:05:37 volumio kernel: [hdmitx:] vinfo: set cur_enc_ppc as 1, vpp color: 0 Oct 31 06:05:37 volumio kernel: DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE Oct 31 06:05:37 volumio kernel: vlock: event MODE_CHANGE Oct 31 06:05:37 volumio kernel: vsync_pts_inc 1501 1000/59940 Oct 31 06:05:37 volumio kernel: [drm] meson_vout_update_mode_name: hdmitx update vout 1 name 1080p60hz. Oct 31 06:05:37 volumio kernel: [drm] meson_hdmitx_get_hdcp_request usr_type: 3, hdcp cap: 0,0 Oct 31 06:05:37 volumio kernel: [drm] [meson_hdmitx_get_hdcp_request]: TX no hdcp key Oct 31 06:05:37 volumio kernel: [drm:meson_hdmitx_update_hdcp] *ERROR* meet stopped hdcp stat Oct 31 06:05:37 volumio kernel: [drm:meson_hdmitx_update_hdcp] *ERROR* No valid hdcp mode exit, maybe hdcp havenot init. Oct 31 06:05:37 volumio kernel: [drm] [meson_hdmitx_encoder_atomic_disable] Oct 31 06:05:37 volumio kernel: [drm] am_meson_crtc_atomic_disable-[0]:in Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx_unregister_vrr ret = 0 Oct 31 06:05:37 volumio kernel: [drm] meson_hdmitx_choose_preset_mode validate vmode 1080p60hz, 0 Oct 31 06:05:37 volumio kernel: [drm] meson_hdmitx_choose_preset_mode update 1080p60hz expect 0 Oct 31 06:05:37 volumio kernel: [drm] meson_hdmitx_encoder_atomic_mode_set enter:attr[0-8] Oct 31 06:05:37 volumio kernel: [drm] hdmitx hdr eotf check fail [-19] Oct 31 06:05:37 volumio kernel: [hdmitx:] sname = 1080p60hz Oct 31 06:05:37 volumio kernel: [hdmitx:] char_clk = 148352 Oct 31 06:05:37 volumio kernel: [hdmitx:] cd = 4 Oct 31 06:05:37 volumio kernel: [hdmitx:] cs = 0 Oct 31 06:05:37 volumio kernel: [drm] color property setting successfully Oct 31 06:05:37 volumio kernel: [drm] am_meson_crtc_atomic_enable-[0] in: new[1080p60hz], old[1080p60hz], vmode[4-0], uboot[0] Oct 31 06:05:37 volumio kernel: [drm] am_meson_crtc_atomic_enable-[0]: enable mode 1080p60hz final vmode 0 Oct 31 06:05:37 volumio kernel: vlock: event MODE_CHANGE_PRE 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx sub-clock: 5940000 4 1 2 6 1 1 1 1 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] config HPLL = 5940000 frac_rate = 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] config HPLL done Oct 31 06:05:37 volumio kernel: [hdmitx:] clocks_set_vid_clk_div_for_hdmi[408] div = 6 Oct 31 06:05:37 volumio kernel: [hdmitx:] configure venc Oct 31 06:05:37 volumio kernel: [hdmitx:] config_tv_enc_calc[63] vic = 16 Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx_soft_reset[1247] Oct 31 06:05:37 volumio kernel: [hdmitx:] config hdmitx IP vic = 16 cd:4 cs: 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] configure hdmitx21 Oct 31 06:05:37 volumio kernel: [hdmitx:] warn: SCDC not present, should not send 1:10 Oct 31 06:05:37 volumio kernel: [hdmitx:] set audio Oct 31 06:05:37 volumio kernel: [hdmitx:] audio_param->chs = 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_src_if = 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_n_para = 5824 Oct 31 06:05:37 volumio kernel: [hdmitx:] audio state: AUDIO_UNMUTE Oct 31 06:05:37 volumio kernel: [hdmitx:] hdmitx_set_dispmode[1713] frl_rate 0 htotal 2200 cs 0 cd 4 h_unstable 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] Sink is HDMI device Oct 31 06:05:37 volumio kernel: [hdmitx:] set audio Oct 31 06:05:37 volumio kernel: [hdmitx:] audio_param->chs = 1 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_src_if = 0 Oct 31 06:05:37 volumio kernel: [hdmitx:] aud_n_para = 5824 Oct 31 06:05:37 volumio kernel: [hdmitx:] audio state: AUDIO_UNMUTE Oct 31 06:05:37 volumio kernel: [hdmitx:] vinfo: set cur_enc_ppc as 1, vpp color: 0 Oct 31 06:05:37 volumio kernel: DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE Oct 31 06:05:37 volumio kernel: vlock: event MODE_CHANGE Oct 31 06:05:37 volumio kernel: vsync_pts_inc 1501 1000/59940 Oct 31 06:05:37 volumio kernel: [drm] meson_vout_update_mode_name: hdmitx update vout 1 name 1080p60hz. Oct 31 06:05:37 volumio kernel: [drm] meson_hdmitx_get_hdcp_request usr_type: 3, hdcp cap: 0,0 Oct 31 06:05:37 volumio kernel: [drm] [meson_hdmitx_get_hdcp_request]: TX no hdcp key Oct 31 06:05:37 volumio kernel: [drm:meson_hdmitx_update_hdcp] *ERROR* meet stopped hdcp stat Oct 31 06:05:37 volumio kernel: [drm:meson_hdmitx_update_hdcp] *ERROR* No valid hdcp mode exit, maybe hdcp havenot init. Oct 31 06:05:37 volumio volumio[1109]: info: ------------------------------------------- Oct 31 06:05:37 volumio volumio[1109]: info: ----- Volumio3 ---- Oct 31 06:05:37 volumio volumio[1109]: info: ------------------------------------------- Oct 31 06:05:37 volumio volumio[1109]: info: ----- System startup ---- Oct 31 06:05:37 volumio volumio[1109]: info: ------------------------------------------- Oct 31 06:05:37 volumio startx[1111]: (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. Oct 31 06:05:37 volumio ntpd[1098]: Soliciting pool server 162.159.200.123 Oct 31 06:05:38 volumio volumio[1109]: info: Plugin folders cleanup Oct 31 06:05:38 volumio volumio[1109]: info: Scanning into folder /volumio/app/plugins/ Oct 31 06:05:38 volumio volumio[1109]: info: Scanning category audio_interface Oct 31 06:05:38 volumio volumio[1109]: info: Scanning category miscellanea Oct 31 06:05:38 volumio volumio[1109]: info: Scanning category music_service Oct 31 06:05:38 volumio volumio[1109]: info: Scanning category plugins.json Oct 31 06:05:38 volumio volumio[1109]: info: Scanning category system_controller Oct 31 06:05:38 volumio volumio[1109]: info: Scanning category user_interface Oct 31 06:05:38 volumio volumio[1109]: info: Scanning into folder /data/plugins/ Oct 31 06:05:38 volumio volumio[1109]: info: Plugin folders cleanup completed Oct 31 06:05:38 volumio volumio[1109]: info: ------------------------------------------- Oct 31 06:05:38 volumio volumio[1109]: info: ----- Core plugins startup ---- Oct 31 06:05:38 volumio volumio[1109]: info: ------------------------------------------- Oct 31 06:05:38 volumio volumio[1109]: info: Loading plugins from folder /volumio/app/plugins/ Oct 31 06:05:38 volumio volumio[1109]: info: Adding plugin upnp to MyMusic Plugins Oct 31 06:05:38 volumio volumio[1109]: info: Adding plugin airplay_emulation to MyMusic Plugins Oct 31 06:05:38 volumio volumio[1109]: info: Adding plugin upnp_browser to MyMusic Plugins Oct 31 06:05:38 volumio volumio[1109]: info: Loading plugins from folder /data/plugins/ Oct 31 06:05:38 volumio volumio[1109]: info: Loading plugin "system"... Oct 31 06:05:38 volumio volumio[1109]: info: Loading plugin "appearance"... Oct 31 06:05:38 volumio ntpd[1098]: Soliciting pool server 162.159.200.1 Oct 31 06:05:38 volumio ntpd[1098]: Soliciting pool server 223.255.185.2 Oct 31 06:05:38 volumio nmbd[835]: [2024/10/31 06:05:38.832583, 0] ../lib/util/become_daemon.c:138(daemon_ready) Oct 31 06:05:38 volumio nmbd[835]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections Oct 31 06:05:38 volumio systemd[1]: Started Samba NMB Daemon. Oct 31 06:05:38 volumio systemd[1]: Starting Samba Winbind Daemon... Oct 31 06:05:38 volumio nmbd[835]: [2024/10/31 06:05:38.907389, 0] ../source3/nmbd/nmbd_namequery.c:109(query_name_response) Oct 31 06:05:38 volumio nmbd[835]: query_name_response: Multiple (2) responses received for a query on subnet 192.168.30.40 for name WORKGROUP<1d>. Oct 31 06:05:38 volumio nmbd[835]: This response was from IP 192.168.31.252, reporting an IP address of 192.168.31.252. Oct 31 06:05:38 volumio nmbd[835]: [2024/10/31 06:05:38.907803, 0] ../source3/nmbd/nmbd_namequery.c:109(query_name_response) Oct 31 06:05:38 volumio nmbd[835]: query_name_response: Multiple (3) responses received for a query on subnet 192.168.30.40 for name WORKGROUP<1d>. Oct 31 06:05:38 volumio nmbd[835]: This response was from IP 192.168.31.252, reporting an IP address of 192.168.31.252. Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "network"... Oct 31 06:05:39 volumio volumio[1109]: info: Refreshing Cached IP Addresses Oct 31 06:05:39 volumio winbindd[1200]: [2024/10/31 06:05:39.063987, 0] ../source3/winbindd/winbindd_cache.c:3160(initialize_winbindd_cache) Oct 31 06:05:39 volumio winbindd[1200]: initialize_winbindd_cache: clearing cache and re-creating with version number 2 Oct 31 06:05:39 volumio winbindd[1200]: [2024/10/31 06:05:39.071615, 0] ../lib/util/become_daemon.c:138(daemon_ready) Oct 31 06:05:39 volumio winbindd[1200]: daemon_ready: STATUS=daemon 'winbindd' finished starting up and ready to serve connections Oct 31 06:05:39 volumio systemd[1]: Started Samba Winbind Daemon. Oct 31 06:05:39 volumio systemd[1]: Starting Samba SMB Daemon... Oct 31 06:05:39 volumio sudo[1210]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Oct 31 06:05:39 volumio sudo[1210]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:39 volumio sudo[1213]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Oct 31 06:05:39 volumio sudo[1210]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:39 volumio sudo[1213]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "services"... Oct 31 06:05:39 volumio sudo[1213]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "alsa_controller"... Oct 31 06:05:39 volumio sudo[1228]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan Oct 31 06:05:39 volumio sudo[1228]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:39 volumio kernel: [dhd] [wlan0] wl_escan_set_scan : LEGACY_SCAN Oct 31 06:05:39 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "wizard"... Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "networkfs"... Oct 31 06:05:39 volumio kernel: [dhd] CFG80211-ERROR) wl_escan_handler : escan is not ready. drv_scan_status 0x0 e_type 69 e_status 8 Oct 31 06:05:39 volumio kernel: [dhd] CFG80211-ERROR) wl_escan_handler : [Repeats 0 times] Oct 31 06:05:39 volumio volumio[1109]: info: Starting Udev Watcher for removable devices Oct 31 06:05:39 volumio volumio[1109]: info: Ignoring mount for partition: boot Oct 31 06:05:39 volumio volumio[1109]: info: Ignoring mount for partition: volumio Oct 31 06:05:39 volumio volumio[1109]: info: Ignoring mount for partition: volumio_data Oct 31 06:05:39 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "volumio_command_line_client"... Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "upnp"... Oct 31 06:05:39 volumio volumio[1109]: info: [1730354739223] Starting Upmpd Daemon Oct 31 06:05:39 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "my_music"... Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "mpd"... Oct 31 06:05:39 volumio winbindd[1200]: [2024/10/31 06:05:39.331031, 0] ../source3/winbindd/wb_lookupsids.c:659(wb_lookupsids_recv) Oct 31 06:05:39 volumio winbindd[1200]: res_names->count = 3, expected 4 Oct 31 06:05:39 volumio smbd[1229]: [2024/10/31 06:05:39.362799, 0] ../lib/util/become_daemon.c:138(daemon_ready) Oct 31 06:05:39 volumio smbd[1229]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections Oct 31 06:05:39 volumio systemd[1]: Started Samba SMB Daemon. Oct 31 06:05:39 volumio systemd[1]: Reached target Multi-User System. Oct 31 06:05:39 volumio systemd[1]: Reached target Graphical Interface. Oct 31 06:05:39 volumio systemd[1]: Starting Update UTMP about System Runlevel Changes... Oct 31 06:05:39 volumio systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. Oct 31 06:05:39 volumio systemd[1]: Started Update UTMP about System Runlevel Changes. Oct 31 06:05:39 volumio systemd[1]: Startup finished in 8.796s (kernel) + 21.327s (userspace) = 30.124s. Oct 31 06:05:39 volumio ntpd[1098]: Soliciting pool server 47.243.51.23 Oct 31 06:05:39 volumio volumio[1109]: info: Loading plugin "upnp_browser"... Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "alarm-clock"... Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "airplay_emulation"... Oct 31 06:05:40 volumio volumio[1109]: info: Starting Shairport Sync Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "last_100"... Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "webradio"... Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "i2s_dacs"... Oct 31 06:05:40 volumio volumio[1109]: info: I2S DAC not set, start Auto-detection Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "volumiodiscovery"... Oct 31 06:05:40 volumio volumio[1109]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Oct 31 06:05:40 volumio volumio[1109]: *** WARNING *** Please fix your application to use the native API of Avahi! Oct 31 06:05:40 volumio volumio[1109]: *** WARNING *** For more information see Oct 31 06:05:40 volumio volumio[1109]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Oct 31 06:05:40 volumio volumio[1109]: *** WARNING *** Please fix your application to use the native API of Avahi! Oct 31 06:05:40 volumio volumio[1109]: *** WARNING *** For more information see Oct 31 06:05:40 volumio node[1109]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Oct 31 06:05:40 volumio node[1109]: *** WARNING *** Please fix your application to use the native API of Avahi! Oct 31 06:05:40 volumio node[1109]: *** WARNING *** For more information see Oct 31 06:05:40 volumio node[1109]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Oct 31 06:05:40 volumio node[1109]: *** WARNING *** Please fix your application to use the native API of Avahi! Oct 31 06:05:40 volumio node[1109]: *** WARNING *** For more information see Oct 31 06:05:40 volumio volumio[1109]: info: Applying required configuration parameters for plugin volumiodiscovery Oct 31 06:05:40 volumio volumio[1109]: info: Discovery: Started advertising with name: Volumio Oct 31 06:05:40 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "outputs"... Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "albumart"... Oct 31 06:05:40 volumio volumio[1109]: info: Plugin example_plugin is not enabled Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "inputs"... Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "updater_comm"... Oct 31 06:05:40 volumio volumio[1109]: Forking 7 albumart workers Oct 31 06:05:40 volumio volumio[1109]: info: Plugin mpdemulation is not enabled Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "rest_api"... Oct 31 06:05:40 volumio volumio[1109]: info: Loading plugin "websocket"... Oct 31 06:05:40 volumio volumio[1109]: info: Starting Socket.io Server version 2.3.0 Oct 31 06:05:41 volumio volumio[1109]: info: Loading i18n strings for locale en Oct 31 06:05:41 volumio volumio[1109]: Updating browse sources language Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::initPlayerControls Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: Starting albumart workers Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: Express server listening on port 3000 Oct 31 06:05:41 volumio volumio[1109]: [Metrics] WebUI: 4s 229.60ms Oct 31 06:05:41 volumio volumio[1109]: Starting albumart workers Oct 31 06:05:41 volumio volumio[1109]: Starting albumart workers Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::resetVolumioState Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::getcurrentVolume Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioRetrievevolume Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: error: Cannot read config.txt file: Error: ENOENT: no such file or directory, open '/boot/config.txt' Oct 31 06:05:41 volumio volumio[1109]: Starting albumart workers Oct 31 06:05:41 volumio volumio[1109]: Starting albumart workers Oct 31 06:05:41 volumio volumio[1109]: info: Completed loading Core Plugins Oct 31 06:05:41 volumio volumio[1109]: info: Preparing to generate the ALSA configuration file Oct 31 06:05:41 volumio volumio[1109]: Starting albumart workers Oct 31 06:05:41 volumio volumio[1109]: info: Cannot read play queue from file Oct 31 06:05:41 volumio volumio[1109]: info: Volumio Network Manager: Network status updated: 2 Oct 31 06:05:41 volumio volumio[1109]: info: Cannot read proc/cpuinfo: Error: Command failed: cat /proc/cpuinfo | grep Revision Oct 31 06:05:41 volumio volumio[1109]: info: The plugin alsa_controller has an ALSA contribution file softvolume.postVolume.conf Oct 31 06:05:41 volumio volumio[1109]: info: Reading ALSA contributions from plugins. Oct 31 06:05:41 volumio volumio[1109]: Starting albumart workers Oct 31 06:05:41 volumio volumio[1109]: verbose: New Socket.io Connection to 192.168.30.40 from 192.168.31.232 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/130.0.0.0 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 1 Oct 31 06:05:41 volumio volumio[1109]: verbose: New Socket.io Connection to 192.168.30.40 from 192.168.31.232 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/130.0.0.0 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 2 Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::pushState Oct 31 06:05:41 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioPushState Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::updateTrackBlock Oct 31 06:05:41 volumio volumio[1109]: info: CorePlayQueue::getTrackBlock Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioRetrievevolume Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::setRepeat null single undefined Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::pushState Oct 31 06:05:41 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioPushState Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::setRandom null Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::pushState Oct 31 06:05:41 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioPushState Oct 31 06:05:41 volumio volumio[1109]: info: CoreStateMachine::pushState Oct 31 06:05:41 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioPushState Oct 31 06:05:41 volumio volumio[1109]: info: Asound.conf file unchanged, so no further update is needed Oct 31 06:05:41 volumio volumio[1109]: info: Output device has changed, restarting MPD Oct 31 06:05:41 volumio sudo[1382]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /etc/mpd.conf Oct 31 06:05:41 volumio sudo[1382]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:41 volumio volumio[1109]: info: Output device has changed, restarting Shairport Sync Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:41 volumio sudo[1385]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart mpd.service Oct 31 06:05:41 volumio sudo[1385]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:41 volumio sudo[1382]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:41 volumio volumio[1109]: info: Could not detect Primo: Error: Command failed: aplay -l | grep es90x8q2m-dac-dai-0 Oct 31 06:05:41 volumio volumio[1109]: info: ___________ START PLUGINS ___________ Oct 31 06:05:41 volumio volumio[1109]: info: ControllerMpd::onStart: Initializing MPD Oct 31 06:05:41 volumio volumio[1109]: info: Creating MPD Configuration file Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Oct 31 06:05:41 volumio volumio[1109]: info: [1730354741828] CoreMusicLibrary::Adding element Media Servers Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:41 volumio sudo[1403]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /etc/mpd.conf Oct 31 06:05:41 volumio sudo[1403]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:41 volumio sudo[1403]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:41 volumio systemd[1]: Listening on mpd.socket. Oct 31 06:05:41 volumio systemd[1]: Starting Music Player Daemon... Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:41 volumio sudo[1409]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart mpd.service Oct 31 06:05:41 volumio sudo[1409]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:41 volumio volumio[1109]: info: Could not detect Primo: Error: Command failed: aplay -l | grep es90x8q2m-dac-dai-0 Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:41 volumio systemd[1]: mpd.service: Control process exited, code=killed, status=15/TERM Oct 31 06:05:41 volumio systemd[1]: mpd.service: Succeeded. Oct 31 06:05:41 volumio systemd[1]: Stopped Music Player Daemon. Oct 31 06:05:41 volumio systemd[1]: Starting Music Player Daemon... Oct 31 06:05:41 volumio volumio[1109]: info: Could not detect Primo: Error: Command failed: aplay -l | grep es90x8q2m-dac-dai-0 Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Oct 31 06:05:41 volumio volumio[1109]: info: [1730354741907] CoreMusicLibrary::Adding element Last_100 Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Oct 31 06:05:41 volumio volumio[1109]: info: [1730354741910] CoreMusicLibrary::Adding element Webradio Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Oct 31 06:05:41 volumio volumio[1109]: info: Initializing BBC Radios Oct 31 06:05:41 volumio sudo[1423]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chown mpd:audio /var/log/mpd.log Oct 31 06:05:41 volumio sudo[1423]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:41 volumio sudo[1423]: /bin/chown: cannot access '/var/log/mpd.log': No such file or directory Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Oct 31 06:05:41 volumio sudo[1423]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:41 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:41 volumio volumio[1109]: info: Volumio Calling Home Oct 31 06:05:41 volumio sudo[1228]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:42 volumio volumio[1109]: info: Discovery: adding 84569a76-70a9-46ad-a0aa-d0c46920298f Oct 31 06:05:42 volumio volumio[1109]: info: Discovery: Found device Volumio Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::volumioGetState Oct 31 06:05:42 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:42 volumio volumio[1109]: error: Could not retrieve plugin audio_interface multiroom Oct 31 06:05:42 volumio volumio[1109]: info: MPD Permissions set Oct 31 06:05:42 volumio volumio[1109]: info: MPD Permissions set Oct 31 06:05:42 volumio volumio[1109]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 3 Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getCPUCoresNumber Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getCPUCoresNumber Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:42 volumio volumio[1109]: info: Starting Shairport Sync Oct 31 06:05:42 volumio volumio[1109]: info: Starting Shairport Sync Oct 31 06:05:42 volumio volumio[1109]: info: Starting Shairport Sync Oct 31 06:05:42 volumio sudo[1477]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart shairport-sync Oct 31 06:05:42 volumio sudo[1477]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:42 volumio sudo[1479]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart shairport-sync Oct 31 06:05:42 volumio sudo[1479]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:42 volumio sudo[1482]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart shairport-sync Oct 31 06:05:42 volumio sudo[1482]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:42 volumio systemd[1]: Stopping Shairport Sync - AirPlay Audio Receiver... Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::volumioGetState Oct 31 06:05:42 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:42 volumio systemd[1]: shairport-sync.service: Succeeded. Oct 31 06:05:42 volumio systemd[1]: Stopped Shairport Sync - AirPlay Audio Receiver. Oct 31 06:05:42 volumio systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Oct 31 06:05:42 volumio sudo[1477]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:42 volumio sudo[1479]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:42 volumio systemd[1]: Stopping Shairport Sync - AirPlay Audio Receiver... Oct 31 06:05:42 volumio systemd[1]: shairport-sync.service: Main process exited, code=killed, status=15/TERM Oct 31 06:05:42 volumio systemd[1]: shairport-sync.service: Succeeded. Oct 31 06:05:42 volumio systemd[1]: Stopped Shairport Sync - AirPlay Audio Receiver. Oct 31 06:05:42 volumio volumio[1109]: info: Shairport-Sync Started Oct 31 06:05:42 volumio volumio[1109]: Error adding Membership: Error: addMembership EINVAL Oct 31 06:05:42 volumio volumio[1109]: info: Shairport-Sync Started Oct 31 06:05:42 volumio systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Oct 31 06:05:42 volumio sudo[1482]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:42 volumio volumio[1109]: info: Shairport-Sync Started Oct 31 06:05:42 volumio volumio[1109]: info: Discovery: this is already registered, 84569a76-70a9-46ad-a0aa-d0c46920298f Oct 31 06:05:42 volumio volumio[1109]: info: Discovery: Found device Volumio Oct 31 06:05:42 volumio volumio[1109]: info: CoreCommandRouter::volumioGetState Oct 31 06:05:42 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:42 volumio volumio[1109]: error: Could not retrieve plugin audio_interface multiroom Oct 31 06:05:42 volumio mpd[1460]: Oct 31 06:05 : decoder: Decoder plugin 'wildmidi' is unavailable: configuration file does not exist: /etc/timidity/timidity.cfg Oct 31 06:05:42 volumio systemd[1]: Started Music Player Daemon. Oct 31 06:05:42 volumio sudo[1385]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:42 volumio sudo[1409]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:43 volumio volumio[1109]: info: Completed starting Core Plugins Oct 31 06:05:43 volumio volumio[1109]: info: BOOT COMPLETED Oct 31 06:05:43 volumio volumio[1109]: [Metrics] CommandRouter: 5s 463.68ms Oct 31 06:05:43 volumio volumio[1109]: info: CoreCommandRouter::volumiosetStartupVolume Oct 31 06:05:43 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Oct 31 06:05:43 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:43 volumio volumio[1109]: info: CoreCommandRouter::Close All Modals sent Oct 31 06:05:43 volumio volumio[1109]: info: CoreCommandRouter::Close All Modals sent Oct 31 06:05:43 volumio kernel: vddnpu: disabling Oct 31 06:05:43 volumio volumio[1109]: error: MPD error: The expression evaluated to a falsy value: Oct 31 06:05:43 volumio volumio[1109]: assert.ok(self.idling) Oct 31 06:05:43 volumio volumio[1109]: error: The expression evaluated to a falsy value: Oct 31 06:05:43 volumio volumio[1109]: assert.ok(self.idling) Oct 31 06:05:43 volumio volumio[1109]: info: MPD running with PID1460 Oct 31 06:05:43 volumio volumio[1109]: ,establishing connection Oct 31 06:05:43 volumio volumio[1109]: error: updateQueue error: null Oct 31 06:05:43 volumio volumio[1109]: error: updateQueue error: null Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , checkAudioDeviceAvailable Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , versionChangeDetect Oct 31 06:05:44 volumio volumio[1109]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: Mozilla/5.0 (X11; Linux aarch64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/90.0.4430.212 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 4 Oct 31 06:05:44 volumio ntpd[1098]: Soliciting pool server 223.255.185.2 Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::volumioGetVisibleSources Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Oct 31 06:05:44 volumio volumio[1109]: error: Could not retrieve plugin audio_interface multiroom Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::volumioGetState Oct 31 06:05:44 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Oct 31 06:05:44 volumio volumio[1109]: verbose: New Socket.io Connection to 192.168.30.40 from 192.168.31.232 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/130.0.0.0 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 5 Oct 31 06:05:44 volumio volumio[1109]: info: Volumio called home Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::volumioGetState Oct 31 06:05:44 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Oct 31 06:05:44 volumio volumio[1109]: error: Could not retrieve plugin audio_interface multiroom Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::volumioGetVisibleSources Oct 31 06:05:44 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:44 volumio volumio[1109]: info: Listing playlists Oct 31 06:05:45 volumio volumio[1109]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: Mozilla/5.0 (X11; Linux aarch64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/90.0.4430.212 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 5 Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::volumioGetState Oct 31 06:05:45 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Oct 31 06:05:45 volumio volumio[1109]: error: Could not retrieve plugin audio_interface multiroom Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::volumioGetVisibleSources Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:45 volumio volumio[1109]: info: Listing playlists Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Oct 31 06:05:45 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Oct 31 06:05:46 volumio volumio-remote-updater[656]: [2024-10-31 06:05:46] [connect] Successful connection Oct 31 06:05:46 volumio volumio-remote-updater[656]: [2024-10-31 06:05:46] [connect] WebSocket Connection 127.0.0.1:3000 v-2 "WebSocket++/0.8.2" /socket.io/?EIO=4&transport=websocket&t=1730354746 101 Oct 31 06:05:46 volumio volumio[1109]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: WebSocket++/0.8.2 Engine version: 4 Transport: websocket Total Clients: 6 Oct 31 06:05:46 volumio volumio[1109]: info: VolumeController::SetAlsaVolume0 Oct 31 06:05:46 volumio volumio[1109]: info: CoreStateMachine::pushState Oct 31 06:05:46 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:46 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Oct 31 06:05:46 volumio volumio[1109]: info: CoreCommandRouter::volumioPushState Oct 31 06:05:46 volumio volumio[1109]: error: Cannot set ALSA Volume: Error: Alsa Mixer Error: amixer: Unable to find simple control 'SoftMaster',0 Oct 31 06:05:48 volumio volumio[1109]: error: Failed LSINFO: Error: [50@0] {lsinfo} No such directory Oct 31 06:05:49 volumio sudo[1604]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Oct 31 06:05:49 volumio sudo[1604]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:49 volumio sudo[1606]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Oct 31 06:05:49 volumio sudo[1604]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:49 volumio sudo[1606]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:49 volumio sudo[1606]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:49 volumio sudo[1609]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start upmpdcli.service Oct 31 06:05:49 volumio sudo[1609]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:49 volumio systemd[1]: Started UPnP Renderer front-end to MPD. Oct 31 06:05:49 volumio sudo[1609]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:49 volumio volumio[1109]: info: Upmpdcli Daemon Started Oct 31 06:05:49 volumio volumio[1612]: Generating RSA private key, 4096 bit long modulus (2 primes) Oct 31 06:05:50 volumio systemd[1]: systemd-fsckd.service: Succeeded. Oct 31 06:05:52 volumio sh[622]: timed out Oct 31 06:05:52 volumio sh[622]: dhcpcd exited Oct 31 06:05:52 volumio dhcpcd[650]: timed out Oct 31 06:05:52 volumio dhcpcd[650]: dhcpcd exited Oct 31 06:05:52 volumio sh[622]: ifup: failed to bring up eth0 Oct 31 06:05:52 volumio systemd[1]: ifup@eth0.service: Main process exited, code=exited, status=1/FAILURE Oct 31 06:05:52 volumio systemd[1]: ifup@eth0.service: Failed with result 'exit-code'. Oct 31 06:05:57 volumio sudo[1813]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Oct 31 06:05:57 volumio sudo[1813]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:57 volumio sudo[1813]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:57 volumio sudo[1816]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Oct 31 06:05:57 volumio sudo[1816]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 31 06:05:57 volumio sudo[1816]: pam_unix(sudo:session): session closed for user root Oct 31 06:05:57 volumio volumio[1109]: verbose: New Socket.io Connection to 192.168.30.40 from 192.168.31.232 UA: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/130.0.0.0 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 6 Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::volumioGetState Oct 31 06:05:57 volumio volumio[1109]: info: CorePlayQueue::getTrack 0 Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Oct 31 06:05:57 volumio volumio[1109]: error: Could not retrieve plugin audio_interface multiroom Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::volumioGetVisibleSources Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Oct 31 06:05:57 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::getUIConfigOnPlugin Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sOptions Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getPlaybackMode Oct 31 06:05:59 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getAdvancedSettingsStatus Oct 31 06:06:00 volumio volumio[1612]: ..........................................................................................................................................................................................................................................................................................................++++ Oct 31 06:06:02 volumio volumio[1109]: info: CoreCommandRouter::volumioGetQueue Oct 31 06:06:02 volumio volumio[1109]: info: CoreStateMachine::getQueue Oct 31 06:06:02 volumio volumio[1109]: info: CorePlayQueue::getQueue Oct 31 06:06:02 volumio volumio[1109]: info: Listing playlists Oct 31 06:06:02 volumio volumio[1109]: info: Preload queue cleared Oct 31 06:06:04 volumio volumio[1612]: .............................................................................................................++++ Oct 31 06:06:04 volumio volumio[1612]: e is 65537 (0x010001) Oct 31 06:06:04 volumio volumio[1612]: writing RSA key Oct 31 06:06:11 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Oct 31 06:06:11 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Oct 31 06:06:11 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Oct 31 06:06:12 volumio volumio[1109]: error: Could not retrieve plugin system_controller my_volumio Oct 31 06:06:43 volumio kernel: [dhd] dhd_process_pkt_reorder_info: *Warning, new+flush, out=1, pending=0 Oct 31 06:06:43 volumio ntpd[1098]: Soliciting pool server 119.28.230.190 Oct 31 06:06:44 volumio ntpd[1098]: Soliciting pool server 119.28.230.190 Oct 31 06:06:45 volumio ntpd[1098]: Soliciting pool server 2001:ac8:a:23:0:1:0:14 Oct 31 06:06:51 volumio volumio[1109]: info: CoreCommandRouter::getUIConfigOnPlugin Oct 31 06:06:51 volumio volumio[1109]: error: Could not retrieve plugin music_service streaming_services Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: system , getAdvancedSettingsStatus Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::volumioGetBrowseSources Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::volumioGetBrowseSources Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::volumioGetBrowseSources Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getMyCollectionStats Oct 31 06:06:52 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: networkfs , listShares Oct 31 06:06:53 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: networkfs , discoverShares Oct 31 06:06:53 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , browseForService Oct 31 06:06:55 volumio volumio[1109]: info: Error browsing device WeDocs for shares : Error: Command failed: echo volumio | smbclient -L WeDocs.local. Oct 31 06:06:55 volumio volumio[1109]: Unable to initialize messaging context Oct 31 06:06:56 volumio volumio[1109]: info: CoreCommandRouter::executeOnPlugin: mpd , getMyCollectionStats Oct 31 06:06:58 volumio volumio[1109]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Oct 31 06:06:58 volumio volumio[1109]: Error: dns service error: unknown Oct 31 06:06:58 volumio volumio[1109]: at MDNSService.on_resolver_done (/volumio/node_modules/mdns/lib/resolver_sequence_tasks.js:19:30) Oct 31 06:06:58 volumio volumio[1109]: at SocketWatcher.MDNSService.self.watcher.callback (/volumio/node_modules/mdns/lib/mdns_service.js:18:40) { Oct 31 06:06:58 volumio volumio[1109]: errorCode: -65537 Oct 31 06:06:58 volumio volumio[1109]: } Oct 31 06:06:58 volumio volumio[1109]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Oct 31 06:06:58 volumio sudo[2066]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/journalctl --since=2024-10-31 06:05 Oct 31 06:06:58 volumio sudo[2066]: pam_unix(sudo:session): session opened for user root by (uid=0) PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" VOLUMIO_BUILD_VERSION="bba9e3185e150dd0995f9a49355b34fc6218d5a2" VOLUMIO_FE_VERSION="e7cae168f9927391640a091813b8a9656b6909b6" VOLUMIO_FE3_VERSION="df82a8f23c90a3617c15c55572c8aaea90d8b32a" VOLUMIO_BE_VERSION="e71179fefb92227f783fc914e012504f08dcf6fb" VOLUMIO_ARCH="armv7" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Fri Oct 25 11:19:12 AM UTC 2024" VOLUMIO_VERSION="3.757" VOLUMIO_HARDWARE="vim4" VOLUMIO_DEVICENAME="Khadas VIM4" VOLUMIO_HASH="45cbc7a358f4ac7caaf1c988ea607de8"