-- Logs begin at Tue 2024-10-29 10:26:06 CST, end at Tue 2024-10-29 13:59:58 CST. -- Oct 29 13:58:16 smsl-n100 volumiologrotate[709]: ls: cannot access '/var/log/samba/log.wb-SMSL': No such file or directory Oct 29 13:58:16 smsl-n100 volumiologrotate[709]: ls: cannot access 'N100': No such file or directory Oct 29 13:58:24 smsl-n100 dhcpcd[1188]: eth0: soliciting a DHCP lease Oct 29 13:58:24 smsl-n100 dhcpcd[1188]: eth0: offered 192.168.2.134 from 192.168.2.1 Oct 29 13:58:24 smsl-n100 dhcpcd[1188]: eth0: NAK: Invalid Request Message from 192.168.2.1 Oct 29 13:58:24 smsl-n100 dhcpcd[1188]: eth0: message: Invalid Request Message Oct 29 13:58:29 smsl-n100 dhcpcd[1188]: eth0: carrier lost Oct 29 13:58:29 smsl-n100 kernel: rk_gmac-dwmac ff540000.ethernet eth0: Link is Down Oct 29 13:58:29 smsl-n100 ifplugd(eth0)[885]: Link beat lost. Oct 29 13:58:39 smsl-n100 ifplugd(eth0)[885]: Executing '/etc/ifplugd/ifplugd.action eth0 down'. Oct 29 13:58:39 smsl-n100 dhcpcd[2172]: sending commands to master dhcpcd process Oct 29 13:58:39 smsl-n100 ifplugd(eth0)[885]: client: sending commands to master dhcpcd process Oct 29 13:58:39 smsl-n100 dhcpcd[1188]: control command: /sbin/dhcpcd -k eth0 Oct 29 13:58:39 smsl-n100 dhcpcd[1188]: eth0: removing interface Oct 29 13:58:40 smsl-n100 ifplugd(eth0)[885]: Program executed successfully. Oct 29 13:58:40 smsl-n100 kernel: rk_gmac-dwmac ff540000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 Oct 29 13:58:40 smsl-n100 kernel: rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) Oct 29 13:58:40 smsl-n100 kernel: rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found Oct 29 13:58:40 smsl-n100 kernel: rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW Oct 29 13:58:40 smsl-n100 kernel: rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode Oct 29 13:59:00 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: polling Total Clients: 6 Oct 29 13:59:00 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: polling Total Clients: 7 Oct 29 13:59:00 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: polling Total Clients: 8 Oct 29 13:59:00 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: polling Total Clients: 9 Oct 29 13:59:00 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 10 Oct 29 13:59:00 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:00 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:00 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Oct 29 13:59:00 smsl-n100 volumio[1160]: info: Error : CoreCommandRouter::executeOnPlugin: No method [getMultiroom] in plugin multiroom Oct 29 13:59:00 smsl-n100 volumio[1160]: info: Listing playlists Oct 29 13:59:00 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 11 Oct 29 13:59:00 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 12 Oct 29 13:59:01 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 13 Oct 29 13:59:01 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 14 Oct 29 13:59:01 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 15 Oct 29 13:59:01 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 16 Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:12 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:12 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 17 Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Oct 29 13:59:12 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Oct 29 13:59:13 smsl-n100 sudo[2244]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Oct 29 13:59:13 smsl-n100 sudo[2244]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:13 smsl-n100 sudo[2244]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:13 smsl-n100 sudo[2246]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Oct 29 13:59:13 smsl-n100 sudo[2246]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:13 smsl-n100 sudo[2246]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:13 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.144 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: polling Total Clients: 18 Oct 29 13:59:13 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:13 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:13 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Oct 29 13:59:13 smsl-n100 volumio[1160]: info: Error : CoreCommandRouter::executeOnPlugin: No method [getMultiroom] in plugin multiroom Oct 29 13:59:13 smsl-n100 volumio[1160]: info: Listing playlists Oct 29 13:59:13 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Oct 29 13:59:13 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Oct 29 13:59:13 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Oct 29 13:59:13 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Oct 29 13:59:16 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetVisibleSources Oct 29 13:59:16 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Oct 29 13:59:16 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetQueue Oct 29 13:59:16 smsl-n100 volumio[1160]: info: CoreStateMachine::getQueue Oct 29 13:59:16 smsl-n100 volumio[1160]: info: CorePlayQueue::getQueue Oct 29 13:59:16 smsl-n100 volumiologrotate[709]: ls: cannot access '/var/log/samba/log.wb-SMSL': No such file or directory Oct 29 13:59:16 smsl-n100 volumiologrotate[709]: ls: cannot access 'N100': No such file or directory Oct 29 13:59:18 smsl-n100 volumio[1160]: info: CoreCommandRouter::getUIConfigOnPlugin Oct 29 13:59:18 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getAdvancedSettingsStatus Oct 29 13:59:18 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getInfoNetwork Oct 29 13:59:18 smsl-n100 sudo[2307]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ethtool eth0 Oct 29 13:59:18 smsl-n100 sudo[2307]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:18 smsl-n100 sudo[2307]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:18 smsl-n100 sudo[2312]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwconfig wlan0 Oct 29 13:59:18 smsl-n100 sudo[2312]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:18 smsl-n100 sudo[2312]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:18 smsl-n100 sudo[2319]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwconfig wlan0 Oct 29 13:59:18 smsl-n100 sudo[2319]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:18 smsl-n100 sudo[2319]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:18 smsl-n100 sudo[2327]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwconfig wlan0 Oct 29 13:59:18 smsl-n100 sudo[2327]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:18 smsl-n100 sudo[2327]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:18 smsl-n100 sudo[2332]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Oct 29 13:59:18 smsl-n100 sudo[2332]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:18 smsl-n100 sudo[2332]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:18 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getWirelessNetworksScanCache Oct 29 13:59:18 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getWirelessNetworks Oct 29 13:59:18 smsl-n100 sudo[2335]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Oct 29 13:59:18 smsl-n100 sudo[2335]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:18 smsl-n100 sudo[2335]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:18 smsl-n100 sudo[2339]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan Oct 29 13:59:18 smsl-n100 sudo[2339]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:19 smsl-n100 sudo[2339]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Oct 29 13:59:19 smsl-n100 volumio[1160]: info: Received Get System Info Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:19 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:19 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:19 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:28 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:28 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:28 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:28 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:28 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:28 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:31 smsl-n100 kernel: rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx Oct 29 13:59:32 smsl-n100 ifplugd(eth0)[885]: Link beat detected. Oct 29 13:59:32 smsl-n100 ifplugd(eth0)[885]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. Oct 29 13:59:32 smsl-n100 ifplugd(eth0)[885]: client: sending commands to master dhcpcd process Oct 29 13:59:32 smsl-n100 dhcpcd[2376]: sending commands to master dhcpcd process Oct 29 13:59:32 smsl-n100 dhcpcd[1188]: control command: /sbin/dhcpcd eth0 Oct 29 13:59:32 smsl-n100 dhcpcd[1188]: eth0: carrier acquired Oct 29 13:59:32 smsl-n100 dhcpcd[1188]: eth0: IAID f4:b9:f0:bf Oct 29 13:59:32 smsl-n100 ifplugd(eth0)[885]: Program executed successfully. Oct 29 13:59:32 smsl-n100 dhcpcd[1188]: eth0: soliciting a DHCP lease Oct 29 13:59:32 smsl-n100 dhcpcd[1188]: eth0: offered 192.168.2.134 from 192.168.2.1 Oct 29 13:59:32 smsl-n100 dhcpcd[1188]: eth0: NAK: Invalid Request Message from 192.168.2.1 Oct 29 13:59:32 smsl-n100 dhcpcd[1188]: eth0: message: Invalid Request Message Oct 29 13:59:33 smsl-n100 dhcpcd[1188]: eth0: soliciting a DHCP lease Oct 29 13:59:33 smsl-n100 dhcpcd[1188]: eth0: offered 192.168.2.134 from 192.168.2.1 Oct 29 13:59:33 smsl-n100 dhcpcd[1188]: eth0: NAK: Invalid Request Message from 192.168.2.1 Oct 29 13:59:33 smsl-n100 dhcpcd[1188]: eth0: message: Invalid Request Message Oct 29 13:59:33 smsl-n100 dhcpcd[1188]: eth0: soliciting an IPv6 router Oct 29 13:59:34 smsl-n100 dhcpcd[1188]: eth0: soliciting a DHCP lease Oct 29 13:59:36 smsl-n100 dhcpcd[1188]: eth0: offered 192.168.2.134 from 192.168.2.1 Oct 29 13:59:36 smsl-n100 dhcpcd[1188]: eth0: NAK: Invalid Request Message from 192.168.2.1 Oct 29 13:59:36 smsl-n100 dhcpcd[1188]: eth0: message: Invalid Request Message Oct 29 13:59:38 smsl-n100 dhcpcd[1188]: eth0: soliciting a DHCP lease Oct 29 13:59:38 smsl-n100 dhcpcd[1188]: eth0: offered 192.168.2.134 from 192.168.2.1 Oct 29 13:59:38 smsl-n100 dhcpcd[1188]: eth0: NAK: Invalid Request Message from 192.168.2.1 Oct 29 13:59:38 smsl-n100 dhcpcd[1188]: eth0: message: Invalid Request Message Oct 29 13:59:38 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:38 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:38 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:38 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:38 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:38 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:42 smsl-n100 dhcpcd[1188]: eth0: soliciting a DHCP lease Oct 29 13:59:42 smsl-n100 dhcpcd[1188]: eth0: offered 192.168.2.134 from 192.168.2.1 Oct 29 13:59:42 smsl-n100 dhcpcd[1188]: eth0: NAK: Invalid Request Message from 192.168.2.1 Oct 29 13:59:42 smsl-n100 dhcpcd[1188]: eth0: message: Invalid Request Message Oct 29 13:59:48 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:48 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:48 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:48 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:48 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:48 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:50 smsl-n100 dhcpcd[1188]: eth0: soliciting a DHCP lease Oct 29 13:59:50 smsl-n100 dhcpcd[1188]: eth0: offered 192.168.2.134 from 192.168.2.1 Oct 29 13:59:51 smsl-n100 dhcpcd[1188]: eth0: probing address 192.168.2.134/24 Oct 29 13:59:51 smsl-n100 volumio[1160]: info: CoreCommandRouter::getUIConfigOnPlugin Oct 29 13:59:52 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getAdvancedSettingsStatus Oct 29 13:59:52 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getInfoNetwork Oct 29 13:59:52 smsl-n100 sudo[2510]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ethtool eth0 Oct 29 13:59:52 smsl-n100 sudo[2510]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:52 smsl-n100 sudo[2510]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:52 smsl-n100 sudo[2515]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwconfig wlan0 Oct 29 13:59:52 smsl-n100 sudo[2515]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:52 smsl-n100 sudo[2515]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:52 smsl-n100 sudo[2523]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwconfig wlan0 Oct 29 13:59:52 smsl-n100 sudo[2523]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:52 smsl-n100 sudo[2523]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:52 smsl-n100 sudo[2529]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwconfig wlan0 Oct 29 13:59:52 smsl-n100 sudo[2529]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:52 smsl-n100 sudo[2529]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:52 smsl-n100 sudo[2535]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Oct 29 13:59:52 smsl-n100 sudo[2535]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:52 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getWirelessNetworksScanCache Oct 29 13:59:52 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getWirelessNetworks Oct 29 13:59:52 smsl-n100 sudo[2535]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:52 smsl-n100 sudo[2538]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Oct 29 13:59:52 smsl-n100 sudo[2538]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:52 smsl-n100 sudo[2538]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:52 smsl-n100 sudo[2542]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan Oct 29 13:59:52 smsl-n100 sudo[2542]: pam_unix(sudo:session): session opened for user root by (uid=0) Oct 29 13:59:52 smsl-n100 sudo[2542]: pam_unix(sudo:session): session closed for user root Oct 29 13:59:56 smsl-n100 dhcpcd[1188]: eth0: leased 192.168.2.134 for 86400 seconds Oct 29 13:59:56 smsl-n100 dhcpcd[1188]: eth0: adding route to 192.168.2.0/24 Oct 29 13:59:56 smsl-n100 avahi-daemon[712]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.2.134. Oct 29 13:59:56 smsl-n100 dhcpcd[1188]: eth0: adding default route via 192.168.2.1 Oct 29 13:59:56 smsl-n100 avahi-daemon[712]: New relevant interface eth0.IPv4 for mDNS. Oct 29 13:59:56 smsl-n100 avahi-daemon[712]: Registering new address record for 192.168.2.134 on eth0.IPv4. Oct 29 13:59:56 smsl-n100 dhcpcd[1188]: eth0: dhcp_envoption 213: Operation not supported Oct 29 13:59:56 smsl-n100 dhcpcd[1188]: eth0: dhcp_envoption 213: Operation not supported Oct 29 13:59:56 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:56 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:56 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:56 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:56 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:56 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:56 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.134 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 17 Oct 29 13:59:56 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.134 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 18 Oct 29 13:59:56 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.134 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 19 Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:57 smsl-n100 volumio[1160]: info: Reporting MCU Network Status: 3 Oct 29 13:59:57 smsl-n100 volumio[1160]: info: Volumio Network Manager: Network status updated: 3 Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: �����������������������������������������������������������������ﯯ������������������������������PUSH, message: VOLUME Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 100, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: MAXVOL, message: Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 100, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: info: MCU Signalled PowerOff Capabilities, enabling MCU Poweroff Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 ntpd[1186]: ntpd exiting on signal 15 (Terminated) Oct 29 13:59:57 smsl-n100 ntpd[1186]: 193.182.111.12 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 ntpd[1186]: 202.112.29.82 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Oct 29 13:59:57 smsl-n100 ntpd[1186]: 111.230.189.174 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 systemd[1]: Stopping Network Time Service... Oct 29 13:59:57 smsl-n100 ntpd[1186]: 119.28.183.184 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Oct 29 13:59:57 smsl-n100 volumio[1160]: info: Discovery: Getting this device information Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Oct 29 13:59:57 smsl-n100 systemd[1]: ntp.service: Succeeded. Oct 29 13:59:57 smsl-n100 ntpd[1186]: 202.118.1.130 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 systemd[1]: Stopped Network Time Service. Oct 29 13:59:57 smsl-n100 ntpd[1186]: 78.46.102.180 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 ntpd[1186]: 95.111.202.5 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 ntpd[1186]: 84.16.67.12 local addr 192.168.2.144 -> Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: ------------------------------------ BT MESSAGE: BT STATUS: running Oct 29 13:59:57 smsl-n100 volumio[1160]: ------------------------------------ BT MESSAGE: BT STATUS: waiting Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 systemd[1]: Starting Network Time Service... Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: ------------------------------------ BT MESSAGE: BT STATUS: running Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 ntpd[2592]: ntpd 4.2.8p12@1.3728-o (1): Starting Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 ntpd[2592]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:103 Oct 29 13:59:57 smsl-n100 systemd[1]: Started Network Time Service. Oct 29 13:59:57 smsl-n100 ntpd[2598]: proto: precision = 1.166 usec (-20) Oct 29 13:59:57 smsl-n100 ntpd[2598]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Oct 29 13:59:57 smsl-n100 ntpd[2598]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2022-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Oct 29 13:59:57 smsl-n100 ntpd[2598]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): expired less than 672 days ago Oct 29 13:59:57 smsl-n100 ntpd[2598]: Listen and drop on 0 v6wildcard [::]:123 Oct 29 13:59:57 smsl-n100 ntpd[2598]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Oct 29 13:59:57 smsl-n100 ntpd[2598]: Listen normally on 2 lo 127.0.0.1:123 Oct 29 13:59:57 smsl-n100 ntpd[2598]: Listen normally on 3 eth0 192.168.2.134:123 Oct 29 13:59:57 smsl-n100 ntpd[2598]: Listen normally on 4 wlan0 192.168.2.144:123 Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 ntpd[2598]: Listening on routing socket on fd #21 for interface updates Oct 29 13:59:57 smsl-n100 ntpd[2598]: kernel reports TIME_ERROR: 0x4041: Clock Unsynchronized Oct 29 13:59:57 smsl-n100 ntpd[2598]: kernel reports TIME_ERROR: 0x4041: Clock Unsynchronized Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.134 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 20 Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.134 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 21 Oct 29 13:59:57 smsl-n100 volumio[1160]: verbose: New Socket.io Connection to 192.168.2.134 from 192.168.2.179 UA: okhttp/4.9.2 Engine version: 3 Transport: websocket Total Clients: 22 Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: error: Serial API: Failed to decode command: 2, message: undefined Oct 29 13:59:57 smsl-n100 volumio[1160]: info: Discovery: this is already registered, 79adfdb1-fa2c-4550-adeb-01f4c2bfd578 Oct 29 13:59:57 smsl-n100 volumio[1160]: info: Discovery: Found device SMSL N100 Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CoreCommandRouter::volumioGetState Oct 29 13:59:57 smsl-n100 volumio[1160]: info: CorePlayQueue::getTrack 0 Oct 29 13:59:57 smsl-n100 volumio[1160]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Oct 29 13:59:57 smsl-n100 volumio[1160]: Error: The value NaN is not a number Oct 29 13:59:57 smsl-n100 volumio[1160]: at Config.forceToType (/volumio/node_modules/v-conf/index.js:322:20) Oct 29 13:59:57 smsl-n100 volumio[1160]: at Config.set (/volumio/node_modules/v-conf/index.js:153:25) Oct 29 13:59:57 smsl-n100 volumio[1160]: at ControllerVolumioDiscovery.updateMultiroomDevice (/volumio/app/plugins/system_controller/volumiodiscovery/index.js:323:25) Oct 29 13:59:57 smsl-n100 volumio[1160]: at ControllerVolumioDiscovery.connectToRemoteVolumio (/volumio/app/plugins/system_controller/volumiodiscovery/index.js:273:10) Oct 29 13:59:57 smsl-n100 volumio[1160]: at Browser. (/volumio/app/plugins/system_controller/volumiodiscovery/index.js:192:12) Oct 29 13:59:57 smsl-n100 volumio[1160]: at Browser.emit (events.js:400:28) Oct 29 13:59:57 smsl-n100 volumio[1160]: at on_resolver_done (/volumio/node_modules/mdns/lib/browser.js:31:14) Oct 29 13:59:57 smsl-n100 volumio[1160]: at next (/volumio/node_modules/mdns/lib/browser.js:106:7) Oct 29 13:59:57 smsl-n100 volumio[1160]: at Array.makeAddressesUnique (/volumio/node_modules/mdns/lib/resolver_sequence_tasks.js:177:5) Oct 29 13:59:57 smsl-n100 volumio[1160]: at next (/volumio/node_modules/mdns/lib/browser.js:109:21) Oct 29 13:59:57 smsl-n100 volumio[1160]: at /volumio/node_modules/mdns/lib/resolver_sequence_tasks.js:160:11 Oct 29 13:59:57 smsl-n100 volumio[1160]: at getaddrinfo_complete (/volumio/node_modules/mdns/lib/resolver_sequence_tasks.js:108:7) Oct 29 13:59:57 smsl-n100 volumio[1160]: at GetAddrInfoReqWrap.oncomplete (/volumio/node_modules/mdns/lib/resolver_sequence_tasks.js:120:9) Oct 29 13:59:57 smsl-n100 volumio[1160]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Oct 29 13:59:58 smsl-n100 ntpd[2598]: Soliciting pool server 193.182.111.12 Oct 29 13:59:58 smsl-n100 sudo[2609]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/journalctl --since=2024-10-29 13:58 Oct 29 13:59:58 smsl-n100 sudo[2609]: pam_unix(sudo:session): session opened for user root by (uid=0) PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" VOLUMIO_BUILD_VERSION="bba9e3185e150dd0995f9a49355b34fc6218d5a2" VOLUMIO_FE_VERSION="e7cae168f9927391640a091813b8a9656b6909b6" VOLUMIO_FE3_VERSION="df82a8f23c90a3617c15c55572c8aaea90d8b32a" VOLUMIO_BE_VERSION="e71179fefb92227f783fc914e012504f08dcf6fb" VOLUMIO_ARCH="armv7" VOLUMIO_VARIANT="smsl" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Thu 24 Oct 2024 09:45:35 AM CEST" VOLUMIO_VERSION="3.758" VOLUMIO_HARDWARE="nanopineo3-armbian" VOLUMIO_DEVICENAME="NanoPi Neo3" VOLUMIO_VENDOR_MODEL="SMSL S100" VOLUMIO_VENDOR="SMSL" VOLUMIO_MODEL="S100" VOLUMIO_HASH="c83b50df238823988635e61d61230ef1"