-- Logs begin at Mon 2024-08-26 00:39:09 CEST, end at Mon 2024-08-26 00:39:44 CEST. -- Aug 26 00:39:09 klipsch kernel: Linux version 6.6.32-volumio (gkkpch@UbuntuVM24.04) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #2 SMP PREEMPT_DYNAMIC Wed May 29 23:04:42 CEST 2024 Aug 26 00:39:09 klipsch kernel: Command line: BOOT_IMAGE=/vmlinuz initramfs.clear splash plymouth.ignore-serial-consoles quiet loglevel=0 biosdevname=0 imgpart=UUID=7d0353a6-075a-49d1-ac7a-eb2640af4ca5 bootpart=UUID=F358-EDD3 datapart=UUID=1499fcc8-deb6-4a38-afb3-9b0af347f0bc hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh logo.nologo vt.global_cursor_default=0 acpi_backlight=vendor net.ifnames=0 use_kmsg=no Aug 26 00:39:09 klipsch kernel: KERNEL supported cpus: Aug 26 00:39:09 klipsch kernel: Intel GenuineIntel Aug 26 00:39:09 klipsch kernel: AMD AuthenticAMD Aug 26 00:39:09 klipsch kernel: Hygon HygonGenuine Aug 26 00:39:09 klipsch kernel: Centaur CentaurHauls Aug 26 00:39:09 klipsch kernel: zhaoxin Shanghai Aug 26 00:39:09 klipsch kernel: BIOS-provided physical RAM map: Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x0000000040200000-0x000000006b180fff] usable Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006b181000-0x000000006b1fefff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006b1ff000-0x000000006b20ffff] ACPI data Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006b210000-0x000000006b70ffff] ACPI NVS Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006b710000-0x000000006ba0cfff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006ba0d000-0x000000006ba6efff] type 20 Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006ba6f000-0x000000006bc37fff] usable Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006bc38000-0x000000006bfc7fff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x000000006bfc8000-0x000000006bffffff] usable Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved Aug 26 00:39:09 klipsch kernel: BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable Aug 26 00:39:09 klipsch kernel: NX (Execute Disable) protection: active Aug 26 00:39:09 klipsch kernel: APIC: Static calls initialized Aug 26 00:39:09 klipsch kernel: efi: EFI v2.4 by American Megatrends Aug 26 00:39:09 klipsch kernel: efi: ACPI=0x6b202000 ACPI 2.0=0x6b202000 SMBIOS=0xf05b0 Aug 26 00:39:09 klipsch kernel: efi: Not removing mem28: MMIO range=[0xe00f8000-0xe00f8fff] (4KB) from e820 map Aug 26 00:39:09 klipsch kernel: efi: Not removing mem29: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map Aug 26 00:39:09 klipsch kernel: efi: Not removing mem30: MMIO range=[0xfed08000-0xfed08fff] (4KB) from e820 map Aug 26 00:39:09 klipsch kernel: efi: Remove mem31: MMIO range=[0xffb00000-0xffffffff] (5MB) from e820 map Aug 26 00:39:09 klipsch kernel: e820: remove [mem 0xffb00000-0xffffffff] reserved Aug 26 00:39:09 klipsch kernel: SMBIOS 2.8 present. Aug 26 00:39:09 klipsch kernel: DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N3150-NUC, BIOS P1.30 09/17/2015 Aug 26 00:39:09 klipsch kernel: tsc: Detected 1600.000 MHz processor Aug 26 00:39:09 klipsch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Aug 26 00:39:09 klipsch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable Aug 26 00:39:09 klipsch kernel: last_pfn = 0x280000 max_arch_pfn = 0x400000000 Aug 26 00:39:09 klipsch kernel: MTRR map: 6 entries (3 fixed + 3 variable; max 19), built from 8 variable MTRRs Aug 26 00:39:09 klipsch kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Aug 26 00:39:09 klipsch kernel: e820: update [mem 0x6c000000-0xffffffff] usable ==> reserved Aug 26 00:39:09 klipsch kernel: last_pfn = 0x6c000 max_arch_pfn = 0x400000000 Aug 26 00:39:09 klipsch kernel: found SMP MP-table at [mem 0x000fd830-0x000fd83f] Aug 26 00:39:09 klipsch kernel: Secure boot could not be determined Aug 26 00:39:09 klipsch kernel: RAMDISK: [mem 0x2fae9000-0x33d6bfff] Aug 26 00:39:09 klipsch kernel: ACPI: Early table checksum verification disabled Aug 26 00:39:09 klipsch kernel: ACPI: RSDP 0x000000006B202000 000024 (v02 ALASKA) Aug 26 00:39:09 klipsch kernel: ACPI: XSDT 0x000000006B202088 000094 (v01 ALASKA A M I 01072009 AMI 00010013) Aug 26 00:39:09 klipsch kernel: ACPI: FACP 0x000000006B20E4B8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) Aug 26 00:39:09 klipsch kernel: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20230628/tbfadt-564) Aug 26 00:39:09 klipsch kernel: ACPI: DSDT 0x000000006B2021B0 00C302 (v02 ALASKA A M I 01072009 INTL 20120913) Aug 26 00:39:09 klipsch kernel: ACPI: FACS 0x000000006B70FE80 000040 Aug 26 00:39:09 klipsch kernel: ACPI: APIC 0x000000006B20E5C8 000084 (v03 ALASKA A M I 01072009 AMI 00010013) Aug 26 00:39:09 klipsch kernel: ACPI: FPDT 0x000000006B20E650 000044 (v01 ALASKA A M I 01072009 AMI 00010013) Aug 26 00:39:09 klipsch kernel: ACPI: FIDT 0x000000006B20E698 00009C (v01 ALASKA A M I 01072009 AMI 00010013) Aug 26 00:39:09 klipsch kernel: ACPI: AAFT 0x000000006B20E738 0000F7 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) Aug 26 00:39:09 klipsch kernel: ACPI: MSDM 0x000000006B20E830 000055 (v03 ALASKA A M I 01072009 AMI 00010013) Aug 26 00:39:09 klipsch kernel: ACPI: MCFG 0x000000006B20E888 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) Aug 26 00:39:09 klipsch kernel: ACPI: SSDT 0x000000006B20E8C8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) Aug 26 00:39:09 klipsch kernel: ACPI: SSDT 0x000000006B20F030 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) Aug 26 00:39:09 klipsch kernel: ACPI: SSDT 0x000000006B20F2C0 00017A (v01 PmRef ApTst 00003000 INTL 20061109) Aug 26 00:39:09 klipsch kernel: ACPI: UEFI 0x000000006B20F440 000042 (v01 ALASKA A M I 00000000 00000000) Aug 26 00:39:09 klipsch kernel: ACPI: LPIT 0x000000006B20F488 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D) Aug 26 00:39:09 klipsch kernel: ACPI: BGRT 0x000000006B20F590 000038 (v01 ALASKA A M I 01072009 AMI 00010013) Aug 26 00:39:09 klipsch kernel: ACPI: CSRT 0x000000006B20F5C8 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) Aug 26 00:39:09 klipsch kernel: ACPI: Reserving FACP table memory at [mem 0x6b20e4b8-0x6b20e5c3] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving DSDT table memory at [mem 0x6b2021b0-0x6b20e4b1] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving FACS table memory at [mem 0x6b70fe80-0x6b70febf] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving APIC table memory at [mem 0x6b20e5c8-0x6b20e64b] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving FPDT table memory at [mem 0x6b20e650-0x6b20e693] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving FIDT table memory at [mem 0x6b20e698-0x6b20e733] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving AAFT table memory at [mem 0x6b20e738-0x6b20e82e] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving MSDM table memory at [mem 0x6b20e830-0x6b20e884] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving MCFG table memory at [mem 0x6b20e888-0x6b20e8c3] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving SSDT table memory at [mem 0x6b20e8c8-0x6b20f02a] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving SSDT table memory at [mem 0x6b20f030-0x6b20f2bf] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving SSDT table memory at [mem 0x6b20f2c0-0x6b20f439] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving UEFI table memory at [mem 0x6b20f440-0x6b20f481] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving LPIT table memory at [mem 0x6b20f488-0x6b20f58b] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving BGRT table memory at [mem 0x6b20f590-0x6b20f5c7] Aug 26 00:39:09 klipsch kernel: ACPI: Reserving CSRT table memory at [mem 0x6b20f5c8-0x6b20f713] Aug 26 00:39:09 klipsch kernel: Zone ranges: Aug 26 00:39:09 klipsch kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff] Aug 26 00:39:09 klipsch kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Aug 26 00:39:09 klipsch kernel: Normal [mem 0x0000000100000000-0x000000027fffffff] Aug 26 00:39:09 klipsch kernel: Movable zone start for each node Aug 26 00:39:09 klipsch kernel: Early memory node ranges Aug 26 00:39:09 klipsch kernel: node 0: [mem 0x0000000000001000-0x000000000003efff] Aug 26 00:39:09 klipsch kernel: node 0: [mem 0x0000000000040000-0x000000000009ffff] Aug 26 00:39:09 klipsch kernel: node 0: [mem 0x0000000000100000-0x000000003fffffff] Aug 26 00:39:09 klipsch kernel: node 0: [mem 0x0000000040200000-0x000000006b180fff] Aug 26 00:39:09 klipsch kernel: node 0: [mem 0x000000006ba6f000-0x000000006bc37fff] Aug 26 00:39:09 klipsch kernel: node 0: [mem 0x000000006bfc8000-0x000000006bffffff] Aug 26 00:39:09 klipsch kernel: node 0: [mem 0x0000000100000000-0x000000027fffffff] Aug 26 00:39:09 klipsch kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] Aug 26 00:39:09 klipsch kernel: On node 0, zone DMA: 1 pages in unavailable ranges Aug 26 00:39:09 klipsch kernel: On node 0, zone DMA: 1 pages in unavailable ranges Aug 26 00:39:09 klipsch kernel: On node 0, zone DMA: 96 pages in unavailable ranges Aug 26 00:39:09 klipsch kernel: On node 0, zone DMA32: 512 pages in unavailable ranges Aug 26 00:39:09 klipsch kernel: On node 0, zone DMA32: 2286 pages in unavailable ranges Aug 26 00:39:09 klipsch kernel: On node 0, zone DMA32: 912 pages in unavailable ranges Aug 26 00:39:09 klipsch kernel: On node 0, zone Normal: 16384 pages in unavailable ranges Aug 26 00:39:09 klipsch kernel: Reserving Intel graphics memory at [mem 0x6ef00000-0x7eefffff] Aug 26 00:39:09 klipsch kernel: ACPI: PM-Timer IO Port: 0x408 Aug 26 00:39:09 klipsch kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Aug 26 00:39:09 klipsch kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Aug 26 00:39:09 klipsch kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Aug 26 00:39:09 klipsch kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Aug 26 00:39:09 klipsch kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 Aug 26 00:39:09 klipsch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Aug 26 00:39:09 klipsch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Aug 26 00:39:09 klipsch kernel: ACPI: Using ACPI (MADT) for SMP configuration information Aug 26 00:39:09 klipsch kernel: e820: update [mem 0x695e6000-0x69626fff] usable ==> reserved Aug 26 00:39:09 klipsch kernel: TSC deadline timer available Aug 26 00:39:09 klipsch kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x695e6000-0x69626fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6b181000-0x6b1fefff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6b1ff000-0x6b20ffff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6b210000-0x6b70ffff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6b710000-0x6ba0cfff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6ba0d000-0x6ba6efff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6bc38000-0x6bfc7fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6c000000-0x6eefffff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x6ef00000-0x7eefffff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0x7ef00000-0xe00f7fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed00fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfed07fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed08000-0xfed08fff] Aug 26 00:39:09 klipsch kernel: PM: hibernation: Registered nosave memory: [mem 0xfed09000-0xffffffff] Aug 26 00:39:09 klipsch kernel: [mem 0x7ef00000-0xe00f7fff] available for PCI devices Aug 26 00:39:09 klipsch kernel: Booting paravirtualized kernel on bare hardware Aug 26 00:39:09 klipsch kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns Aug 26 00:39:09 klipsch kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 Aug 26 00:39:09 klipsch kernel: percpu: Embedded 56 pages/cpu s191400 r8192 d29784 u524288 Aug 26 00:39:09 klipsch kernel: pcpu-alloc: s191400 r8192 d29784 u524288 alloc=1*2097152 Aug 26 00:39:09 klipsch kernel: pcpu-alloc: [0] 0 1 2 3 Aug 26 00:39:09 klipsch kernel: Kernel command line: BOOT_IMAGE=/vmlinuz initramfs.clear splash plymouth.ignore-serial-consoles quiet loglevel=0 biosdevname=0 imgpart=UUID=7d0353a6-075a-49d1-ac7a-eb2640af4ca5 bootpart=UUID=F358-EDD3 datapart=UUID=1499fcc8-deb6-4a38-afb3-9b0af347f0bc hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh logo.nologo vt.global_cursor_default=0 acpi_backlight=vendor net.ifnames=0 use_kmsg=no Aug 26 00:39:09 klipsch kernel: Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz biosdevname=0 imgpart=UUID=7d0353a6-075a-49d1-ac7a-eb2640af4ca5 bootpart=UUID=F358-EDD3 datapart=UUID=1499fcc8-deb6-4a38-afb3-9b0af347f0bc hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh use_kmsg=no", will be passed to user space. Aug 26 00:39:09 klipsch kernel: random: crng init done Aug 26 00:39:09 klipsch kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Aug 26 00:39:09 klipsch kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) Aug 26 00:39:09 klipsch kernel: Built 1 zonelists, mobility grouping on. Total pages: 1979835 Aug 26 00:39:09 klipsch kernel: mem auto-init: stack:all(zero), heap alloc:off, heap free:off Aug 26 00:39:09 klipsch kernel: software IO TLB: area num 4. Aug 26 00:39:09 klipsch kernel: Memory: 7699544K/8045696K available (14336K kernel code, 1878K rwdata, 4640K rodata, 2988K init, 1148K bss, 345896K reserved, 0K cma-reserved) Aug 26 00:39:09 klipsch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Aug 26 00:39:09 klipsch kernel: Kernel/User page tables isolation: enabled Aug 26 00:39:09 klipsch kernel: ftrace: allocating 40433 entries in 158 pages Aug 26 00:39:09 klipsch kernel: ftrace: allocated 158 pages with 5 groups Aug 26 00:39:09 klipsch kernel: Dynamic Preempt: voluntary Aug 26 00:39:09 klipsch kernel: rcu: Preemptible hierarchical RCU implementation. Aug 26 00:39:09 klipsch kernel: rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. Aug 26 00:39:09 klipsch kernel: Trampoline variant of Tasks RCU enabled. Aug 26 00:39:09 klipsch kernel: Rude variant of Tasks RCU enabled. Aug 26 00:39:09 klipsch kernel: Tracing variant of Tasks RCU enabled. Aug 26 00:39:09 klipsch kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Aug 26 00:39:09 klipsch kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 Aug 26 00:39:09 klipsch kernel: NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16 Aug 26 00:39:09 klipsch kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention. Aug 26 00:39:09 klipsch kernel: Console: colour dummy device 80x25 Aug 26 00:39:09 klipsch kernel: printk: console [tty0] enabled Aug 26 00:39:09 klipsch kernel: ACPI: Core revision 20230628 Aug 26 00:39:09 klipsch kernel: APIC: Switch to symmetric I/O mode setup Aug 26 00:39:09 klipsch kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns Aug 26 00:39:09 klipsch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000) Aug 26 00:39:09 klipsch kernel: CPU0: Thermal monitoring enabled (TM1) Aug 26 00:39:09 klipsch kernel: process: using mwait in idle threads Aug 26 00:39:09 klipsch kernel: Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 Aug 26 00:39:09 klipsch kernel: Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 Aug 26 00:39:09 klipsch kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Aug 26 00:39:09 klipsch kernel: Spectre V2 : Mitigation: Retpolines Aug 26 00:39:09 klipsch kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Aug 26 00:39:09 klipsch kernel: Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT Aug 26 00:39:09 klipsch kernel: MDS: Vulnerable: Clear CPU buffers attempted, no microcode Aug 26 00:39:09 klipsch kernel: MMIO Stale Data: Unknown: No mitigations Aug 26 00:39:09 klipsch kernel: x86/fpu: x87 FPU will use FXSAVE Aug 26 00:39:09 klipsch kernel: Freeing SMP alternatives memory: 32K Aug 26 00:39:09 klipsch kernel: pid_max: default: 32768 minimum: 301 Aug 26 00:39:09 klipsch kernel: LSM: initializing lsm=capability,yama,integrity Aug 26 00:39:09 klipsch kernel: Yama: becoming mindful. Aug 26 00:39:09 klipsch kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Aug 26 00:39:09 klipsch kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Aug 26 00:39:09 klipsch kernel: smpboot: CPU0: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3) Aug 26 00:39:09 klipsch kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. Aug 26 00:39:09 klipsch kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. Aug 26 00:39:09 klipsch kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. Aug 26 00:39:09 klipsch kernel: Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. Aug 26 00:39:09 klipsch kernel: ... version: 3 Aug 26 00:39:09 klipsch kernel: ... bit width: 40 Aug 26 00:39:09 klipsch kernel: ... generic registers: 2 Aug 26 00:39:09 klipsch kernel: ... value mask: 000000ffffffffff Aug 26 00:39:09 klipsch kernel: ... max period: 0000007fffffffff Aug 26 00:39:09 klipsch kernel: ... fixed-purpose events: 3 Aug 26 00:39:09 klipsch kernel: ... event mask: 0000000700000003 Aug 26 00:39:09 klipsch kernel: signal: max sigframe size: 1440 Aug 26 00:39:09 klipsch kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1331 Aug 26 00:39:09 klipsch kernel: rcu: Hierarchical SRCU implementation. Aug 26 00:39:09 klipsch kernel: rcu: Max phase no-delay instances is 1000. Aug 26 00:39:09 klipsch kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. Aug 26 00:39:09 klipsch kernel: smp: Bringing up secondary CPUs ... Aug 26 00:39:09 klipsch kernel: smpboot: x86: Booting SMP configuration: Aug 26 00:39:09 klipsch kernel: .... node #0, CPUs: #1 #2 #3 Aug 26 00:39:09 klipsch kernel: smp: Brought up 1 node, 4 CPUs Aug 26 00:39:09 klipsch kernel: smpboot: Max logical packages: 1 Aug 26 00:39:09 klipsch kernel: smpboot: Total of 4 processors activated (12800.00 BogoMIPS) Aug 26 00:39:09 klipsch kernel: devtmpfs: initialized Aug 26 00:39:09 klipsch kernel: x86/mm: Memory block size: 128MB Aug 26 00:39:09 klipsch kernel: ACPI: PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes) Aug 26 00:39:09 klipsch kernel: ACPI: PM: Registering ACPI NVS region [mem 0x6b210000-0x6b70ffff] (5242880 bytes) Aug 26 00:39:09 klipsch kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Aug 26 00:39:09 klipsch kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear) Aug 26 00:39:09 klipsch kernel: pinctrl core: initialized pinctrl subsystem Aug 26 00:39:09 klipsch kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family Aug 26 00:39:09 klipsch kernel: audit: initializing netlink subsys (disabled) Aug 26 00:39:09 klipsch kernel: audit: type=2000 audit(1724625538.008:1): state=initialized audit_enabled=0 res=1 Aug 26 00:39:09 klipsch kernel: thermal_sys: Registered thermal governor 'fair_share' Aug 26 00:39:09 klipsch kernel: thermal_sys: Registered thermal governor 'bang_bang' Aug 26 00:39:09 klipsch kernel: thermal_sys: Registered thermal governor 'step_wise' Aug 26 00:39:09 klipsch kernel: thermal_sys: Registered thermal governor 'user_space' Aug 26 00:39:09 klipsch kernel: EISA bus registered Aug 26 00:39:09 klipsch kernel: cpuidle: using governor ladder Aug 26 00:39:09 klipsch kernel: cpuidle: using governor menu Aug 26 00:39:09 klipsch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Aug 26 00:39:09 klipsch kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Aug 26 00:39:09 klipsch kernel: PCI: not using MMCONFIG Aug 26 00:39:09 klipsch kernel: PCI: Using configuration type 1 for base access Aug 26 00:39:09 klipsch kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance' Aug 26 00:39:09 klipsch kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Aug 26 00:39:09 klipsch kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Aug 26 00:39:09 klipsch kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page Aug 26 00:39:09 klipsch kernel: ACPI: Added _OSI(Module Device) Aug 26 00:39:09 klipsch kernel: ACPI: Added _OSI(Processor Device) Aug 26 00:39:09 klipsch kernel: ACPI: Added _OSI(3.0 _SCP Extensions) Aug 26 00:39:09 klipsch kernel: ACPI: Added _OSI(Processor Aggregator Device) Aug 26 00:39:09 klipsch kernel: ACPI: 4 ACPI AML tables successfully acquired and loaded Aug 26 00:39:09 klipsch kernel: ACPI: Dynamic OEM Table Load: Aug 26 00:39:09 klipsch kernel: ACPI: SSDT 0xFFFF8881008E1800 000613 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) Aug 26 00:39:09 klipsch kernel: ACPI: Dynamic OEM Table Load: Aug 26 00:39:09 klipsch kernel: ACPI: SSDT 0xFFFF888100BD5400 000357 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) Aug 26 00:39:09 klipsch kernel: ACPI: Dynamic OEM Table Load: Aug 26 00:39:09 klipsch kernel: ACPI: SSDT 0xFFFF888100B9C800 00015F (v01 PmRef ApIst 00003000 INTL 20061109) Aug 26 00:39:09 klipsch kernel: ACPI: Dynamic OEM Table Load: Aug 26 00:39:09 klipsch kernel: ACPI: SSDT 0xFFFF8881008B79C0 00008D (v01 PmRef ApCst 00003000 INTL 20061109) Aug 26 00:39:09 klipsch kernel: ACPI: _OSC evaluated successfully for all CPUs Aug 26 00:39:09 klipsch kernel: ACPI: Interpreter enabled Aug 26 00:39:09 klipsch kernel: ACPI: PM: (supports S0 S3 S4 S5) Aug 26 00:39:09 klipsch kernel: ACPI: Using IOAPIC for interrupt routing Aug 26 00:39:09 klipsch kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Aug 26 00:39:09 klipsch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource Aug 26 00:39:09 klipsch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Aug 26 00:39:09 klipsch kernel: PCI: Using E820 reservations for host bridge windows Aug 26 00:39:09 klipsch kernel: ACPI: Enabled 8 GPEs in block 00 to 3F Aug 26 00:39:09 klipsch kernel: ACPI: \_SB_.USBC: New power resource Aug 26 00:39:09 klipsch kernel: ACPI: \_SB_.PCI0.I2C3.CLK0: New power resource Aug 26 00:39:09 klipsch kernel: ACPI: \_SB_.PCI0.I2C4.CLK0: New power resource Aug 26 00:39:09 klipsch kernel: ACPI: \_SB_.PCI0.I2C4.CLK1: New power resource Aug 26 00:39:09 klipsch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Aug 26 00:39:09 klipsch kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] Aug 26 00:39:09 klipsch kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] Aug 26 00:39:09 klipsch kernel: PCI host bridge to bus 0000:00 Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: root bus resource [io 0x0070-0x0077] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: root bus resource [bus 00-ff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: BAR 2: assigned to efifb Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 Aug 26 00:39:09 klipsch kernel: pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f] Aug 26 00:39:09 klipsch kernel: pci 0000:00:13.0: reg 0x24: [mem 0x91415000-0x914157ff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:13.0: PME# supported from D3hot Aug 26 00:39:09 klipsch kernel: pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 Aug 26 00:39:09 klipsch kernel: pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit] Aug 26 00:39:09 klipsch kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold Aug 26 00:39:09 klipsch kernel: pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 Aug 26 00:39:09 klipsch kernel: pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot Aug 26 00:39:09 klipsch kernel: pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300 Aug 26 00:39:09 klipsch kernel: pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400 Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Aug 26 00:39:09 klipsch kernel: pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 Aug 26 00:39:09 klipsch kernel: pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 Aug 26 00:39:09 klipsch kernel: pci 0000:00:1f.3: reg 0x10: [mem 0x91414000-0x9141401f] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] Aug 26 00:39:09 klipsch kernel: pci 0000:01:00.0: [8086:08b3] type 00 class 0x028000 Aug 26 00:39:09 klipsch kernel: pci 0000:01:00.0: reg 0x10: [mem 0x91300000-0x91301fff 64bit] Aug 26 00:39:09 klipsch kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.0: PCI bridge to [bus 01] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.0: bridge window [mem 0x91300000-0x913fffff] Aug 26 00:39:09 klipsch kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 Aug 26 00:39:09 klipsch kernel: pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] Aug 26 00:39:09 klipsch kernel: pci 0000:02:00.0: reg 0x18: [mem 0x91204000-0x91204fff 64bit] Aug 26 00:39:09 klipsch kernel: pci 0000:02:00.0: reg 0x20: [mem 0x91200000-0x91203fff 64bit pref] Aug 26 00:39:09 klipsch kernel: pci 0000:02:00.0: supports D1 D2 Aug 26 00:39:09 klipsch kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: PCI bridge to [bus 02] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: bridge window [mem 0x91200000-0x912fffff] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: on NUMA node 0 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 11 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 11 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 10 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 10 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 5 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 3 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 4 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 0 Aug 26 00:39:09 klipsch kernel: ACPI: PCI: Interrupt link LNKH disabled Aug 26 00:39:09 klipsch kernel: iommu: Default domain type: Translated Aug 26 00:39:09 klipsch kernel: iommu: DMA domain TLB invalidation policy: lazy mode Aug 26 00:39:09 klipsch kernel: SCSI subsystem initialized Aug 26 00:39:09 klipsch kernel: libata version 3.00 loaded. Aug 26 00:39:09 klipsch kernel: ACPI: bus type USB registered Aug 26 00:39:09 klipsch kernel: usbcore: registered new interface driver usbfs Aug 26 00:39:09 klipsch kernel: usbcore: registered new interface driver hub Aug 26 00:39:09 klipsch kernel: usbcore: registered new device driver usb Aug 26 00:39:09 klipsch kernel: efivars: Registered efivars operations Aug 26 00:39:09 klipsch kernel: PCI: Using ACPI for IRQ routing Aug 26 00:39:09 klipsch kernel: PCI: pci_cache_line_size set to 64 bytes Aug 26 00:39:09 klipsch kernel: e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] Aug 26 00:39:09 klipsch kernel: e820: reserve RAM buffer [mem 0x695e6000-0x6bffffff] Aug 26 00:39:09 klipsch kernel: e820: reserve RAM buffer [mem 0x6b181000-0x6bffffff] Aug 26 00:39:09 klipsch kernel: e820: reserve RAM buffer [mem 0x6bc38000-0x6bffffff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: vgaarb: bridge control possible Aug 26 00:39:09 klipsch kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none Aug 26 00:39:09 klipsch kernel: vgaarb: loaded Aug 26 00:39:09 klipsch kernel: clocksource: Switched to clocksource tsc-early Aug 26 00:39:09 klipsch kernel: VFS: Disk quotas dquot_6.6.0 Aug 26 00:39:09 klipsch kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Aug 26 00:39:09 klipsch kernel: pnp: PnP ACPI init Aug 26 00:39:09 klipsch kernel: system 00:01: [io 0x0680-0x069f] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:01: [io 0x0400-0x047f] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:01: [io 0x0500-0x05fe] has been reserved Aug 26 00:39:09 klipsch kernel: ACPI: IRQ 10 override to edge(!), high Aug 26 00:39:09 klipsch kernel: system 00:03: [io 0x0280-0x028f] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:03: [io 0x0290-0x029f] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:03: [io 0x02a0-0x02af] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:03: [io 0x0240-0x024f] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:04: [mem 0x91416000-0x91416fff] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfed08000-0xfed09fff] could not be reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved Aug 26 00:39:09 klipsch kernel: system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved Aug 26 00:39:09 klipsch kernel: pnp: PnP ACPI: found 6 devices Aug 26 00:39:09 klipsch kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns Aug 26 00:39:09 klipsch kernel: NET: Registered PF_INET protocol family Aug 26 00:39:09 klipsch kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) Aug 26 00:39:09 klipsch kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) Aug 26 00:39:09 klipsch kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Aug 26 00:39:09 klipsch kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) Aug 26 00:39:09 klipsch kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) Aug 26 00:39:09 klipsch kernel: TCP: Hash tables configured (established 65536 bind 65536) Aug 26 00:39:09 klipsch kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) Aug 26 00:39:09 klipsch kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) Aug 26 00:39:09 klipsch kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.0: PCI bridge to [bus 01] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.0: bridge window [mem 0x91300000-0x913fffff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: PCI bridge to [bus 02] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] Aug 26 00:39:09 klipsch kernel: pci 0000:00:1c.1: bridge window [mem 0x91200000-0x912fffff] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: resource 4 [io 0x0070-0x0077] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:00: resource 9 [mem 0x80000000-0xdfffffff window] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:01: resource 1 [mem 0x91300000-0x913fffff] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:02: resource 0 [io 0xe000-0xefff] Aug 26 00:39:09 klipsch kernel: pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff] Aug 26 00:39:09 klipsch kernel: PCI: CLS 0 bytes, default 64 Aug 26 00:39:09 klipsch kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Aug 26 00:39:09 klipsch kernel: software IO TLB: mapped [mem 0x00000000645dc000-0x00000000685dc000] (64MB) Aug 26 00:39:09 klipsch kernel: Trying to unpack rootfs image as initramfs... Aug 26 00:39:09 klipsch kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns Aug 26 00:39:09 klipsch kernel: clocksource: Switched to clocksource tsc Aug 26 00:39:09 klipsch kernel: Initialise system trusted keyrings Aug 26 00:39:09 klipsch kernel: workingset: timestamp_bits=46 max_order=21 bucket_order=0 Aug 26 00:39:09 klipsch kernel: zbud: loaded Aug 26 00:39:09 klipsch kernel: Key type asymmetric registered Aug 26 00:39:09 klipsch kernel: Asymmetric key parser 'x509' registered Aug 26 00:39:09 klipsch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Aug 26 00:39:09 klipsch kernel: io scheduler mq-deadline registered Aug 26 00:39:09 klipsch kernel: io scheduler kyber registered Aug 26 00:39:09 klipsch kernel: pcieport 0000:00:1c.0: PME: Signaling with IRQ 115 Aug 26 00:39:09 klipsch kernel: pcieport 0000:00:1c.1: PME: Signaling with IRQ 116 Aug 26 00:39:09 klipsch kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Aug 26 00:39:09 klipsch kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 Aug 26 00:39:09 klipsch kernel: ACPI: button: Power Button [PWRB] Aug 26 00:39:09 klipsch kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 Aug 26 00:39:09 klipsch kernel: ACPI: button: Sleep Button [SLPB] Aug 26 00:39:09 klipsch kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 Aug 26 00:39:09 klipsch kernel: ACPI: button: Power Button [PWRF] Aug 26 00:39:09 klipsch kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Aug 26 00:39:09 klipsch kernel: hpet: number irqs doesn't agree with number of timers Aug 26 00:39:09 klipsch kernel: Linux agpgart interface v0.103 Aug 26 00:39:09 klipsch kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller Aug 26 00:39:09 klipsch kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 Aug 26 00:39:09 klipsch kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810 Aug 26 00:39:09 klipsch kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller Aug 26 00:39:09 klipsch kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 Aug 26 00:39:09 klipsch kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed Aug 26 00:39:09 klipsch kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 Aug 26 00:39:09 klipsch kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 26 00:39:09 klipsch kernel: usb usb1: Product: xHCI Host Controller Aug 26 00:39:09 klipsch kernel: usb usb1: Manufacturer: Linux 6.6.32-volumio xhci-hcd Aug 26 00:39:09 klipsch kernel: usb usb1: SerialNumber: 0000:00:14.0 Aug 26 00:39:09 klipsch kernel: hub 1-0:1.0: USB hub found Aug 26 00:39:09 klipsch kernel: hub 1-0:1.0: 7 ports detected Aug 26 00:39:09 klipsch kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 Aug 26 00:39:09 klipsch kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 26 00:39:09 klipsch kernel: usb usb2: Product: xHCI Host Controller Aug 26 00:39:09 klipsch kernel: usb usb2: Manufacturer: Linux 6.6.32-volumio xhci-hcd Aug 26 00:39:09 klipsch kernel: usb usb2: SerialNumber: 0000:00:14.0 Aug 26 00:39:09 klipsch kernel: hub 2-0:1.0: USB hub found Aug 26 00:39:09 klipsch kernel: hub 2-0:1.0: 6 ports detected Aug 26 00:39:09 klipsch kernel: i8042: PNP: No PS/2 controller found. Aug 26 00:39:09 klipsch kernel: mousedev: PS/2 mouse device common for all mice Aug 26 00:39:09 klipsch kernel: rtc_cmos 00:00: RTC can wake from S4 Aug 26 00:39:09 klipsch kernel: rtc_cmos 00:00: registered as rtc0 Aug 26 00:39:09 klipsch kernel: rtc_cmos 00:00: setting system clock to 2024-08-25T22:38:59 UTC (1724625539) Aug 26 00:39:09 klipsch kernel: rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram Aug 26 00:39:09 klipsch kernel: i2c_dev: i2c /dev entries driver Aug 26 00:39:09 klipsch kernel: platform eisa.0: Probing EISA bus 0 Aug 26 00:39:09 klipsch kernel: platform eisa.0: EISA: Cannot allocate resource for mainboard Aug 26 00:39:09 klipsch kernel: intel_pstate: Intel P-state driver initializing Aug 26 00:39:09 klipsch kernel: ledtrig-cpu: registered to indicate activity on CPUs Aug 26 00:39:09 klipsch kernel: efifb: probing for efifb Aug 26 00:39:09 klipsch kernel: efifb: framebuffer at 0x80000000, using 3072k, total 3072k Aug 26 00:39:09 klipsch kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1 Aug 26 00:39:09 klipsch kernel: efifb: scrolling: redraw Aug 26 00:39:09 klipsch kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Aug 26 00:39:09 klipsch kernel: Console: switching to colour frame buffer device 128x48 Aug 26 00:39:09 klipsch kernel: fb0: EFI VGA frame buffer device Aug 26 00:39:09 klipsch kernel: NET: Registered PF_INET6 protocol family Aug 26 00:39:09 klipsch kernel: Segment Routing with IPv6 Aug 26 00:39:09 klipsch kernel: In-situ OAM (IOAM) with IPv6 Aug 26 00:39:09 klipsch kernel: mip6: Mobile IPv6 Aug 26 00:39:09 klipsch kernel: NET: Registered PF_PACKET protocol family Aug 26 00:39:09 klipsch kernel: mpls_gso: MPLS GSO support Aug 26 00:39:09 klipsch kernel: microcode: Microcode Update Driver: v2.2. Aug 26 00:39:09 klipsch kernel: IPI shorthand broadcast: enabled Aug 26 00:39:09 klipsch kernel: sched_clock: Marking stable (404009337, 1730800)->(453643863, -47903726) Aug 26 00:39:09 klipsch kernel: Loading compiled-in X.509 certificates Aug 26 00:39:09 klipsch kernel: clk: Disabling unused clocks Aug 26 00:39:09 klipsch kernel: usb 1-2: new full-speed USB device number 2 using xhci_hcd Aug 26 00:39:09 klipsch kernel: usb 1-2: New USB device found, idVendor=24ae, idProduct=1001, bcdDevice= 1.07 Aug 26 00:39:09 klipsch kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Aug 26 00:39:09 klipsch kernel: usb 1-2: Product: Rapoo 2.4G Wireless Touch Desktop Aug 26 00:39:09 klipsch kernel: usb 1-2: Manufacturer: MOSART Semi. Aug 26 00:39:09 klipsch kernel: usb 1-3: new full-speed USB device number 3 using xhci_hcd Aug 26 00:39:09 klipsch kernel: usb 1-3: New USB device found, idVendor=046d, idProduct=c53f, bcdDevice=44.01 Aug 26 00:39:09 klipsch kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Aug 26 00:39:09 klipsch kernel: usb 1-3: Product: USB Receiver Aug 26 00:39:09 klipsch kernel: usb 1-3: Manufacturer: Logitech Aug 26 00:39:09 klipsch kernel: usb 1-4: new full-speed USB device number 4 using xhci_hcd Aug 26 00:39:09 klipsch kernel: usb 1-4: New USB device found, idVendor=262a, idProduct=180b, bcdDevice= 0.01 Aug 26 00:39:09 klipsch kernel: usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Aug 26 00:39:09 klipsch kernel: usb 1-4: Product: Klipsch R-51PM Aug 26 00:39:09 klipsch kernel: usb 1-4: Manufacturer: NAE Aug 26 00:39:09 klipsch kernel: usb 1-5: new full-speed USB device number 5 using xhci_hcd Aug 26 00:39:09 klipsch kernel: usb 1-5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 Aug 26 00:39:09 klipsch kernel: usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Aug 26 00:39:09 klipsch kernel: Freeing initrd memory: 68108K Aug 26 00:39:09 klipsch kernel: Freeing unused kernel image (initmem) memory: 2988K Aug 26 00:39:09 klipsch kernel: Write protecting the kernel read-only data: 20480k Aug 26 00:39:09 klipsch kernel: Freeing unused kernel image (rodata/data gap) memory: 1504K Aug 26 00:39:09 klipsch kernel: Run /init as init process Aug 26 00:39:09 klipsch kernel: with arguments: Aug 26 00:39:09 klipsch kernel: /init Aug 26 00:39:09 klipsch kernel: splash Aug 26 00:39:09 klipsch kernel: with environment: Aug 26 00:39:09 klipsch kernel: HOME=/ Aug 26 00:39:09 klipsch kernel: TERM=linux Aug 26 00:39:09 klipsch kernel: BOOT_IMAGE=/vmlinuz Aug 26 00:39:09 klipsch kernel: biosdevname=0 Aug 26 00:39:09 klipsch kernel: imgpart=UUID=7d0353a6-075a-49d1-ac7a-eb2640af4ca5 Aug 26 00:39:09 klipsch kernel: bootpart=UUID=F358-EDD3 Aug 26 00:39:09 klipsch kernel: datapart=UUID=1499fcc8-deb6-4a38-afb3-9b0af347f0bc Aug 26 00:39:09 klipsch kernel: hwdevice=x86 Aug 26 00:39:09 klipsch kernel: uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg Aug 26 00:39:09 klipsch kernel: imgfile=/volumio_current.sqsh Aug 26 00:39:09 klipsch kernel: use_kmsg=no Aug 26 00:39:09 klipsch kernel: sdhci: Secure Digital Host Controller Interface driver Aug 26 00:39:09 klipsch kernel: sdhci: Copyright(c) Pierre Ossman Aug 26 00:39:09 klipsch kernel: ACPI: bus type drm_connector registered Aug 26 00:39:09 klipsch kernel: mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA Aug 26 00:39:09 klipsch kernel: hid: raw HID events driver (C) Jiri Kosina Aug 26 00:39:09 klipsch kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt Aug 26 00:39:09 klipsch kernel: i2c i2c-0: 2/2 memory slots populated (from DMI) Aug 26 00:39:09 klipsch kernel: i2c i2c-0: Successfully instantiated SPD at 0x50 Aug 26 00:39:09 klipsch kernel: i2c i2c-0: Successfully instantiated SPD at 0x51 Aug 26 00:39:09 klipsch kernel: ahci 0000:00:13.0: version 3.0 Aug 26 00:39:09 klipsch kernel: ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Aug 26 00:39:09 klipsch kernel: ahci 0000:00:13.0: flags: 64bit ncq ilck led clo only pio slum part deso sadm sds apst Aug 26 00:39:09 klipsch kernel: scsi host0: ahci Aug 26 00:39:09 klipsch kernel: scsi host1: ahci Aug 26 00:39:09 klipsch kernel: ata1: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415100 irq 118 Aug 26 00:39:09 klipsch kernel: ata2: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415180 irq 118 Aug 26 00:39:09 klipsch kernel: mmc0: new HS200 MMC card at address 0001 Aug 26 00:39:09 klipsch kernel: usbcore: registered new interface driver usbhid Aug 26 00:39:09 klipsch kernel: usbhid: USB HID core driver Aug 26 00:39:09 klipsch kernel: mmcblk0: mmc0:0001 BGND3R 29.1 GiB Aug 26 00:39:09 klipsch kernel: mmcblk0: p1 p2 Aug 26 00:39:09 klipsch kernel: mmcblk0boot0: mmc0:0001 BGND3R 4.00 MiB Aug 26 00:39:09 klipsch kernel: mmcblk0boot1: mmc0:0001 BGND3R 4.00 MiB Aug 26 00:39:09 klipsch kernel: mmcblk0rpmb: mmc0:0001 BGND3R 4.00 MiB, chardev (247:0) Aug 26 00:39:09 klipsch kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 26 00:39:09 klipsch kernel: ata1.00: ATA-9: SAMSUNG MZYTY128HDHP-000L2, MAT61L1Q, max UDMA/133 Aug 26 00:39:09 klipsch kernel: ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA Aug 26 00:39:09 klipsch kernel: ata2: SATA link down (SStatus 4 SControl 300) Aug 26 00:39:09 klipsch kernel: ata1.00: Features: Dev-Sleep NCQ-sndrcv Aug 26 00:39:09 klipsch kernel: ata1.00: configured for UDMA/133 Aug 26 00:39:09 klipsch kernel: ahci 0000:00:13.0: port does not support device sleep Aug 26 00:39:09 klipsch kernel: scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZYTY128 1L1Q PQ: 0 ANSI: 5 Aug 26 00:39:09 klipsch kernel: sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) Aug 26 00:39:09 klipsch kernel: sd 0:0:0:0: [sda] Write Protect is off Aug 26 00:39:09 klipsch kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Aug 26 00:39:09 klipsch kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 26 00:39:09 klipsch kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes Aug 26 00:39:09 klipsch kernel: sda: sda1 sda2 sda3 Aug 26 00:39:09 klipsch kernel: sd 0:0:0:0: [sda] Attached SCSI disk Aug 26 00:39:09 klipsch kernel: usbcore: registered new interface driver usbkbd Aug 26 00:39:09 klipsch kernel: usbcore: registered new interface driver usbmouse Aug 26 00:39:09 klipsch kernel: input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:24AE:1001.0001/input/input3 Aug 26 00:39:09 klipsch kernel: r8169 0000:02:00.0 eth0: RTL8168g/8111g, c0:7c:d1:c0:22:9f, XID 4c0, IRQ 119 Aug 26 00:39:09 klipsch kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] Aug 26 00:39:09 klipsch kernel: hid-generic 0003:24AE:1001.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-0000:00:14.0-2/input0 Aug 26 00:39:09 klipsch kernel: input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:24AE:1001.0002/input/input4 Aug 26 00:39:09 klipsch kernel: input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:24AE:1001.0002/input/input5 Aug 26 00:39:09 klipsch kernel: input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:24AE:1001.0002/input/input6 Aug 26 00:39:09 klipsch kernel: input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:24AE:1001.0002/input/input7 Aug 26 00:39:09 klipsch kernel: hid-generic 0003:24AE:1001.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-0000:00:14.0-2/input1 Aug 26 00:39:09 klipsch kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C53F.0003/input/input8 Aug 26 00:39:09 klipsch kernel: hid-generic 0003:046D:C53F.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 Aug 26 00:39:09 klipsch kernel: input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C53F.0004/input/input9 Aug 26 00:39:09 klipsch kernel: input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C53F.0004/input/input10 Aug 26 00:39:09 klipsch kernel: input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C53F.0004/input/input11 Aug 26 00:39:09 klipsch kernel: hid-generic 0003:046D:C53F.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 Aug 26 00:39:09 klipsch kernel: hid-generic 0003:046D:C53F.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 Aug 26 00:39:09 klipsch kernel: input: NAE Klipsch R-51PM as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:262A:180B.0006/input/input13 Aug 26 00:39:09 klipsch kernel: hid-generic 0003:262A:180B.0006: input,hidraw5: USB HID v1.00 Device [NAE Klipsch R-51PM] on usb-0000:00:14.0-4/input0 Aug 26 00:39:09 klipsch kernel: Console: switching to colour dummy device 80x25 Aug 26 00:39:09 klipsch kernel: i915 0000:00:02.0: vgaarb: deactivate vga console Aug 26 00:39:09 klipsch kernel: [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 Aug 26 00:39:09 klipsch kernel: ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) Aug 26 00:39:09 klipsch kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 Aug 26 00:39:09 klipsch kernel: logitech-djreceiver 0003:046D:C53F.0003: hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 Aug 26 00:39:09 klipsch kernel: logitech-djreceiver 0003:046D:C53F.0004: hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 Aug 26 00:39:09 klipsch kernel: logitech-djreceiver 0003:046D:C53F.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 Aug 26 00:39:09 klipsch kernel: fbcon: i915drmfb (fb0) is primary device Aug 26 00:39:09 klipsch kernel: logitech-djreceiver 0003:046D:C53F.0005: device of type eQUAD Lightspeed 1.1 (0x0d) connected on slot 1 Aug 26 00:39:09 klipsch kernel: input: Logitech Wireless Mouse PID:4074 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C53F.0005/0003:046D:4074.0007/input/input15 Aug 26 00:39:09 klipsch kernel: input: Logitech Wireless Mouse PID:4074 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C53F.0005/0003:046D:4074.0007/input/input16 Aug 26 00:39:09 klipsch kernel: hid-generic 0003:046D:4074.0007: input,hidraw6: USB HID v1.11 Keyboard [Logitech Wireless Mouse PID:4074] on usb-0000:00:14.0-3/input2:1 Aug 26 00:39:09 klipsch kernel: Console: switching to colour frame buffer device 512x135 Aug 26 00:39:09 klipsch kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device Aug 26 00:39:09 klipsch kernel: input: Logitech G305 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C53F.0005/0003:046D:4074.0007/input/input20 Aug 26 00:39:09 klipsch kernel: logitech-hidpp-device 0003:046D:4074.0007: input,hidraw6: USB HID v1.11 Keyboard [Logitech G305] on usb-0000:00:14.0-3/input2:1 Aug 26 00:39:09 klipsch kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Aug 26 00:39:09 klipsch kernel: fuse: init (API version 7.39) Aug 26 00:39:09 klipsch kernel: usbcore: registered new interface driver usb-storage Aug 26 00:39:09 klipsch kernel: usbcore: registered new interface driver uas Aug 26 00:39:09 klipsch kernel: [drm] radeon kernel modesetting enabled. Aug 26 00:39:09 klipsch kernel: scsi host2: pata_legacy Aug 26 00:39:09 klipsch kernel: ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 Aug 26 00:39:09 klipsch kernel: scsi host2: pata_legacy Aug 26 00:39:09 klipsch kernel: ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 Aug 26 00:39:09 klipsch kernel: FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Aug 26 00:39:09 klipsch kernel: EXT4-fs (sda2): recovery complete Aug 26 00:39:09 klipsch kernel: EXT4-fs (sda2): mounted filesystem 7d0353a6-075a-49d1-ac7a-eb2640af4ca5 r/w with ordered data mode. Quota mode: none. Aug 26 00:39:09 klipsch kernel: loop: module loaded Aug 26 00:39:09 klipsch kernel: block device autoloading is deprecated and will be removed. Aug 26 00:39:09 klipsch kernel: loop0: detected capacity change from 0 to 1724976 Aug 26 00:39:09 klipsch kernel: EXT4-fs (sda3): recovery complete Aug 26 00:39:09 klipsch kernel: EXT4-fs (sda3): mounted filesystem 1499fcc8-deb6-4a38-afb3-9b0af347f0bc r/w with ordered data mode. Quota mode: none. Aug 26 00:39:09 klipsch systemd[1]: Inserted module 'autofs4' Aug 26 00:39:09 klipsch systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) Aug 26 00:39:09 klipsch systemd[1]: Detected architecture x86-64. Aug 26 00:39:09 klipsch systemd[1]: Set hostname to . Aug 26 00:39:09 klipsch systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. Aug 26 00:39:09 klipsch systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) Aug 26 00:39:09 klipsch systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly. Aug 26 00:39:09 klipsch systemd[1]: Created slice system-systemd\x2dfsck.slice. Aug 26 00:39:09 klipsch systemd[1]: Listening on Journal Audit Socket. Aug 26 00:39:09 klipsch systemd[1]: Created slice system-getty.slice. Aug 26 00:39:09 klipsch systemd[1]: Listening on udev Control Socket. Aug 26 00:39:09 klipsch systemd-journald[482]: Journal started Aug 26 00:39:09 klipsch systemd-journald[482]: Runtime journal (/run/log/journal/8c0482b02cb11fe9ee24a8e2669e9b72) is 3.7M, max 30.0M, 26.2M free. Aug 26 00:39:09 klipsch fake-hwclock[483]: Current system time: 2024-08-25 22:39:09 Aug 26 00:39:09 klipsch fake-hwclock[483]: fake-hwclock saved clock information is in the past: 2024-08-25 22:38:47 Aug 26 00:39:09 klipsch fake-hwclock[483]: To set system time to this saved clock anyway, use "force" Aug 26 00:39:09 klipsch systemd[1]: dynamicswap.service: Succeeded. Aug 26 00:39:09 klipsch kernel: RPC: Registered named UNIX socket transport module. Aug 26 00:39:09 klipsch kernel: RPC: Registered udp transport module. Aug 26 00:39:09 klipsch kernel: RPC: Registered tcp transport module. Aug 26 00:39:09 klipsch kernel: RPC: Registered tcp-with-tls transport module. Aug 26 00:39:09 klipsch kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. Aug 26 00:39:09 klipsch systemd[1]: Mounted RPC Pipe File System. Aug 26 00:39:10 klipsch systemd[1]: Started Create System Users. Aug 26 00:39:10 klipsch systemd[1]: Starting Create Static Device Nodes in /dev... Aug 26 00:39:10 klipsch systemd[1]: Started Create Static Device Nodes in /dev. Aug 26 00:39:10 klipsch systemd[1]: Reached target Local File Systems (Pre). Aug 26 00:39:10 klipsch systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. Aug 26 00:39:10 klipsch systemd[1]: Mounting /tmp... Aug 26 00:39:10 klipsch systemd[1]: Mounting /var/spool/cups... Aug 26 00:39:10 klipsch systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. Aug 26 00:39:10 klipsch systemd[1]: Mounting /var/log... Aug 26 00:39:10 klipsch systemd[1]: Starting udev Kernel Device Manager... Aug 26 00:39:10 klipsch systemd[1]: Mounted /tmp. Aug 26 00:39:10 klipsch systemd[1]: Mounted /var/spool/cups. Aug 26 00:39:10 klipsch systemd[1]: Mounted /var/log. Aug 26 00:39:10 klipsch systemd[1]: Starting Flush Journal to Persistent Storage... Aug 26 00:39:10 klipsch systemd[1]: Mounting /var/spool/cups/tmp... Aug 26 00:39:10 klipsch systemd[1]: Mounted /var/spool/cups/tmp. Aug 26 00:39:10 klipsch systemd-udevd[511]: Network interface NamePolicy= disabled on kernel command line, ignoring. Aug 26 00:39:10 klipsch systemd-journald[482]: Runtime journal (/run/log/journal/8c0482b02cb11fe9ee24a8e2669e9b72) is 3.7M, max 30.0M, 26.2M free. Aug 26 00:39:10 klipsch systemd[1]: Started Flush Journal to Persistent Storage. Aug 26 00:39:10 klipsch systemd[1]: Started udev Kernel Device Manager. Aug 26 00:39:10 klipsch systemd[1]: Started udev Coldplug all Devices. Aug 26 00:39:10 klipsch systemd[1]: Starting Helper to synchronize boot up for ifupdown... Aug 26 00:39:10 klipsch systemd[1]: Starting Show Plymouth Boot Screen... Aug 26 00:39:10 klipsch systemd[1]: Started Helper to synchronize boot up for ifupdown. Aug 26 00:39:10 klipsch systemd[1]: plymouth-start.service: Succeeded. Aug 26 00:39:10 klipsch systemd[1]: Started Show Plymouth Boot Screen. Aug 26 00:39:10 klipsch systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Aug 26 00:39:10 klipsch systemd[1]: Reached target Local Encrypted Volumes. Aug 26 00:39:10 klipsch systemd[1]: Reached target Paths. Aug 26 00:39:10 klipsch systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. Aug 26 00:39:10 klipsch kernel: gpio gpiochip0: (INT0002 Virtual GPIO): not an immutable chip, please consider fixing it! Aug 26 00:39:10 klipsch kernel: nuvoton-cir 00:02: unknown chip, id: 0xc9 0x13, it may not work... Aug 26 00:39:10 klipsch kernel: Registered IR keymap rc-rc6-mce Aug 26 00:39:10 klipsch kernel: pstore: Using crash dump compression: deflate Aug 26 00:39:10 klipsch kernel: cryptd: max_cpu_qlen set to 1000 Aug 26 00:39:10 klipsch kernel: IR RC6 protocol handler initialized Aug 26 00:39:10 klipsch systemd-udevd[526]: Using default interface naming scheme 'v240'. Aug 26 00:39:10 klipsch kernel: SSE version of gcm_enc/dec engaged. Aug 26 00:39:10 klipsch systemd-udevd[526]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Aug 26 00:39:10 klipsch kernel: pstore: Registered efi_pstore as persistent store backend Aug 26 00:39:10 klipsch kernel: rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:02/rc/rc0 Aug 26 00:39:10 klipsch kernel: rc rc0: lirc_dev: driver nuvoton-cir registered at minor = 0, raw IR receiver, no transmitter Aug 26 00:39:10 klipsch kernel: input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:02/rc/rc0/input21 Aug 26 00:39:10 klipsch kernel: nuvoton-cir 00:02: driver has been successfully loaded Aug 26 00:39:10 klipsch kernel: at24 0-0050: supply vcc not found, using dummy regulator Aug 26 00:39:10 klipsch kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Aug 26 00:39:10 klipsch kernel: at24 0-0050: 256 byte spd EEPROM, read-only Aug 26 00:39:10 klipsch systemd-udevd[532]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:10 klipsch kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Aug 26 00:39:10 klipsch kernel: at24 0-0051: supply vcc not found, using dummy regulator Aug 26 00:39:10 klipsch systemd-udevd[558]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:10 klipsch systemd-udevd[560]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:10 klipsch kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Aug 26 00:39:10 klipsch kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' Aug 26 00:39:10 klipsch kernel: at24 0-0051: 256 byte spd EEPROM, read-only Aug 26 00:39:10 klipsch systemd-udevd[534]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:10 klipsch systemd-udevd[554]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:10 klipsch systemd-udevd[538]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:10 klipsch kernel: Intel(R) Wireless WiFi driver for Linux Aug 26 00:39:10 klipsch kernel: iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) Aug 26 00:39:10 klipsch kernel: iwlwifi 0000:01:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0 Aug 26 00:39:10 klipsch kernel: iwlwifi 0000:01:00.0: PCI dev 08b3/8070, rev=0x164, rfid=0xd55555d5 Aug 26 00:39:10 klipsch kernel: iwlwifi 0000:01:00.0: loaded firmware version 17.3216344376.0 3160-17.ucode op_mode iwlmvm Aug 26 00:39:11 klipsch systemd-udevd[516]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[524]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[525]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Aug 26 00:39:11 klipsch systemd-udevd[534]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[532]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[530]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch kernel: iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164 Aug 26 00:39:11 klipsch systemd-udevd[560]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch kernel: iwlwifi 0000:01:00.0: base HW address: b4:6d:83:6b:6d:4f, OTP minor version: 0x0 Aug 26 00:39:11 klipsch kernel: Bluetooth: Core ver 2.22 Aug 26 00:39:11 klipsch kernel: NET: Registered PF_BLUETOOTH protocol family Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI device and connection manager initialized Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI socket layer initialized Aug 26 00:39:11 klipsch kernel: Bluetooth: L2CAP socket layer initialized Aug 26 00:39:11 klipsch kernel: Bluetooth: SCO socket layer initialized Aug 26 00:39:11 klipsch kernel: snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops __SCT__tp_func_intel_frontbuffer_flush [i915]) Aug 26 00:39:11 klipsch kernel: usbcore: registered new interface driver btusb Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART driver ver 2.3 Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol H4 registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol BCSP registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol LL registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol ATH3K registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol Intel registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol Broadcom registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol QCA registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol AG6XX registered Aug 26 00:39:11 klipsch kernel: Bluetooth: HCI UART protocol Marvell registered Aug 26 00:39:11 klipsch kernel: Bluetooth: hci0: Legacy ROM 2.5 revision 0.0 build 1 week 45 2013 Aug 26 00:39:11 klipsch kernel: Bluetooth: hci0: Intel device is already patched. patch num: 27 Aug 26 00:39:11 klipsch kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Aug 26 00:39:11 klipsch systemd-udevd[514]: Using default interface naming scheme 'v240'. Aug 26 00:39:11 klipsch systemd-udevd[514]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Aug 26 00:39:11 klipsch kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp Aug 26 00:39:11 klipsch kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) Aug 26 00:39:11 klipsch kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) Aug 26 00:39:11 klipsch kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 Aug 26 00:39:11 klipsch kernel: snd_hda_codec_realtek hdaudioC0D0: inputs: Aug 26 00:39:11 klipsch kernel: usbcore: registered new interface driver snd-usb-audio Aug 26 00:39:11 klipsch systemd-udevd[532]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[547]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 Aug 26 00:39:11 klipsch kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 Aug 26 00:39:11 klipsch kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 Aug 26 00:39:11 klipsch kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 Aug 26 00:39:11 klipsch systemd-udevd[531]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[532]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[547]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[534]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1. Aug 26 00:39:11 klipsch systemd-udevd[560]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Aug 26 00:39:11 klipsch kernel: alsactl[728]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set Aug 26 00:39:11 klipsch systemd[1]: Found device SAMSUNG_MZYTY128HDHP-000L2 boot. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (Motherboard (one of many)) being skipped. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Wireless 3160 (Dual Band Wireless AC 3160) being skipped. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Aug 26 00:39:12 klipsch systemd[1]: Starting Show Plymouth Boot Screen... Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Aug 26 00:39:12 klipsch systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Aug 26 00:39:12 klipsch systemd[1]: Starting File System Check on /dev/disk/by-uuid/F358-EDD3... Aug 26 00:39:12 klipsch systemd[1]: Starting Load/Save RF Kill Switch Status... Aug 26 00:39:12 klipsch systemd[1]: plymouth-start.service: Succeeded. Aug 26 00:39:12 klipsch systemd[1]: Started Show Plymouth Boot Screen. Aug 26 00:39:12 klipsch systemd[1]: Started File System Check Daemon to report status. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Aug 26 00:39:12 klipsch systemd[1]: Started Load/Save RF Kill Switch Status. Aug 26 00:39:12 klipsch systemd-fsck[749]: fsck.fat 4.1 (2017-01-24) Aug 26 00:39:12 klipsch systemd-fsck[749]: There are differences between boot sector and its backup. Aug 26 00:39:12 klipsch systemd-fsck[749]: This is mostly harmless. Differences: (offset:original/backup) Aug 26 00:39:12 klipsch systemd-fsck[749]: 3:53/6d, 4:59/6b, 5:53/66, 6:4c/73, 7:49/2e, 8:4e/66, 9:55/61, 10:58/74 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 90:fa/0e, 91:fc/1f, 92:31/be, 93:c9/77, 94:8e/7c, 95:d1/ac, 96:bc/22 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 97:76/c0, 98:7b/74, 99:52/0b, 100:06/56, 101:57/b4, 102:1e/0e, 103:56/bb Aug 26 00:39:12 klipsch systemd-fsck[749]: , 104:8e/07, 105:c1/00, 106:b1/cd, 107:26/10, 108:bf/5e, 109:78/eb Aug 26 00:39:12 klipsch systemd-fsck[749]: , 110:7b/f0, 111:f3/32, 112:a5/e4, 113:8e/cd, 114:d9/16, 115:bb/cd Aug 26 00:39:12 klipsch systemd-fsck[749]: , 116:78/19, 117:00/eb, 118:0f/fe, 119:b4/54, 120:37/68, 121:0f/69 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 122:a0/73, 123:56/20, 124:20/69, 125:d2/73, 126:78/20, 127:1b/6e Aug 26 00:39:12 klipsch systemd-fsck[749]: , 128:31/6f, 129:c0/74, 130:b1/20, 131:06/61, 132:89/20, 133:3f/62 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 134:89/6f, 135:47/6f, 136:02/74, 137:f3/61, 138:64/62, 139:a5/6c Aug 26 00:39:12 klipsch systemd-fsck[749]: , 140:8a/65, 141:0e/20, 142:18/64, 143:7c/69, 144:88/73, 145:4d/6b Aug 26 00:39:12 klipsch systemd-fsck[749]: , 146:f8/2e, 147:50/20, 148:50/20, 150:50/6c, 151:cd/65, 152:13/61 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 153:eb/73, 154:62/65, 155:8b/20, 156:55/69, 157:aa/6e, 158:8b/73 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 159:75/65, 160:a8/72, 161:c1/74, 162:ee/20, 163:04/61, 164:01/20 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 165:f2/62, 166:83/6f, 167:fa/6f, 168:4f/74, 169:76/61, 170:31/62 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 171:81/6c, 172:fa/65, 173:b2/20, 174:07/66, 175:73/6c, 176:2b/6f Aug 26 00:39:12 klipsch systemd-fsck[749]: , 177:f6/70, 178:45/70, 179:b4/79, 180:7f/20, 181:75/61, 182:25/6e Aug 26 00:39:12 klipsch systemd-fsck[749]: , 183:38/64, 184:4d/0d, 185:b8/0a, 186:74/70, 187:20/72, 188:66/65 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 189:3d/73, 190:21/73, 191:47/20, 192:50/61, 193:54/6e, 194:75/79 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 195:10/20, 196:80/6b, 197:7d/65, 198:b8/79, 199:ed/20, 200:75/74 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 201:0a/6f, 202:66/20, 203:ff/74, 204:75/72, 205:ec/79, 206:66/20 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 207:ff/61, 208:75/67, 209:e8/61, 210:eb/69, 211:0f/6e, 212:51/20 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 213:51/2e, 214:66/2e, 215:ff/2e, 216:75/20, 217:bc/0d, 218:eb/0a Aug 26 00:39:12 klipsch systemd-fsck[749]: , 219:07/00, 220:51/00, 221:51/00, 222:66/00, 223:ff/00, 224:36/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 225:1c/00, 226:7c/00, 227:b4/00, 228:08/00, 229:e8/00, 230:e9/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 232:72/00, 233:13/00, 234:20/00, 235:e4/00, 236:75/00, 237:0f/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 238:c1/00, 239:ea/00, 240:08/00, 241:42/00, 242:89/00, 243:16/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 244:1a/00, 245:7c/00, 246:83/00, 247:e1/00, 248:3f/00, 249:89/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 250:0e/00, 251:18/00, 252:7c/00, 253:fb/00, 254:bb/00, 255:aa/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 256:55/00, 257:b4/00, 258:41/00, 259:e8/00, 260:cb/00, 262:72/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 263:10/00, 264:81/00, 265:fb/00, 266:55/00, 267:aa/00, 268:75/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 269:0a/00, 270:f6/00, 271:c1/00, 272:01/00, 273:74/00, 274:05/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 275:c6/00, 276:06/00, 277:46/00, 278:7d/00, 280:66/00, 281:b8/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 282:2d/00, 283:15/00, 286:66/00, 287:ba/00, 292:bb/00, 294:80/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 295:e8/00, 296:0e/00, 298:66/00, 299:81/00, 300:3e/00, 301:1c/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 302:80/00, 303:d5/00, 304:cf/00, 305:c7/00, 306:62/00, 307:75/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 308:74/00, 309:e9/00, 310:f8/00, 311:02/00, 312:66/00, 313:03/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 314:06/00, 315:60/00, 316:7b/00, 317:66/00, 318:13/00, 319:16/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 320:64/00, 321:7b/00, 322:b9/00, 323:10/00, 325:eb/00, 326:2b/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 327:66/00, 328:52/00, 329:66/00, 330:50/00, 331:06/00, 332:53/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 333:6a/00, 334:01/00, 335:6a/00, 336:10/00, 337:89/00, 338:e6/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 339:66/00, 340:60/00, 341:b4/00, 342:42/00, 343:e8/00, 344:77/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 346:66/00, 347:61/00, 348:8d/00, 349:64/00, 350:10/00, 351:72/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 352:01/00, 353:c3/00, 354:66/00, 355:60/00, 356:31/00, 357:c0/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 358:e8/00, 359:68/00, 361:66/00, 362:61/00, 363:e2/00, 364:da/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 365:c6/00, 366:06/00, 367:46/00, 368:7d/00, 369:2b/00, 370:66/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 371:60/00, 372:66/00, 373:0f/00, 374:b7/00, 375:36/00, 376:18/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 377:7c/00, 378:66/00, 379:0f/00, 380:b7/00, 381:3e/00, 382:1a/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 383:7c/00, 384:66/00, 385:f7/00, 386:f6/00, 387:31/00, 388:c9/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 389:87/00, 390:ca/00, 391:66/00, 392:f7/00, 393:f7/00, 394:66/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 395:3d/00, 396:ff/00, 397:03/00, 400:77/00, 401:17/00, 402:c0/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 403:e4/00, 404:06/00, 405:41/00, 406:08/00, 407:e1/00, 408:88/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 409:c5/00, 410:88/00, 411:d6/00, 412:b8/00, 413:01/00, 414:02/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 415:e8/00, 416:2f/00, 418:66/00, 419:61/00, 420:72/00, 421:01/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 422:c3/00, 423:e2/00, 424:c9/00, 425:31/00, 426:f6/00, 427:8e/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 428:d6/00, 429:bc/00, 430:68/00, 431:7b/00, 432:8e/00, 433:de/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 434:66/00, 435:8f/00, 436:06/00, 437:78/00, 439:be/00, 440:da/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 441:7d/00, 442:ac/00, 443:20/00, 444:c0/00, 445:74/00, 446:09/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 447:b4/00, 448:0e/00, 449:bb/00, 450:07/00, 452:cd/00, 453:10/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 454:eb/00, 455:f2/00, 456:31/00, 457:c0/00, 458:cd/00, 459:16/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 460:cd/00, 461:19/00, 462:f4/00, 463:eb/00, 464:fd/00, 465:8a/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 466:16/00, 467:74/00, 468:7b/00, 469:06/00, 470:cd/00, 471:13/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 472:07/00, 473:c3/00, 474:42/00, 475:6f/00, 476:6f/00, 477:74/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 478:20/00, 479:65/00, 480:72/00, 481:72/00, 482:6f/00, 483:72/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 484:0d/00, 485:0a/00, 504:fe/00, 505:02/00, 506:b2/00, 507:3e/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: , 508:18/00, 509:37/00 Aug 26 00:39:12 klipsch systemd-fsck[749]: Not automatically fixing this. Aug 26 00:39:12 klipsch systemd-fsck[749]: /dev/sda1: 18 files, 159613/344788 clusters Aug 26 00:39:12 klipsch systemd[1]: Started File System Check on /dev/disk/by-uuid/F358-EDD3. Aug 26 00:39:12 klipsch systemd[1]: Mounting /boot... Aug 26 00:39:12 klipsch kernel: FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Aug 26 00:39:12 klipsch systemd[1]: Mounted /boot. Aug 26 00:39:12 klipsch systemd[1]: Reached target Local File Systems. Aug 26 00:39:12 klipsch systemd[1]: Starting Preprocess NFS configuration... Aug 26 00:39:12 klipsch systemd[1]: Starting Create Volatile Files and Directories... Aug 26 00:39:12 klipsch systemd[1]: Started ifup for wlan0. Aug 26 00:39:12 klipsch systemd[1]: Starting Raise network interfaces... Aug 26 00:39:12 klipsch systemd[1]: Started ifup for eth0. Aug 26 00:39:12 klipsch systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. Aug 26 00:39:12 klipsch systemd[1]: nfs-config.service: Succeeded. Aug 26 00:39:12 klipsch systemd[1]: Started Preprocess NFS configuration. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped. Aug 26 00:39:12 klipsch systemd[1]: Reached target NFS client services. Aug 26 00:39:12 klipsch systemd[1]: Received SIGRTMIN+20 from PID 370 (plymouthd). Aug 26 00:39:12 klipsch systemd[1]: plymouth-read-write.service: Succeeded. Aug 26 00:39:12 klipsch systemd[1]: Started Tell Plymouth To Write Out Runtime Data. Aug 26 00:39:12 klipsch kernel: warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 Aug 26 00:39:12 klipsch systemd[1]: Started Create Volatile Files and Directories. Aug 26 00:39:12 klipsch systemd[1]: Starting Update UTMP about System Boot/Shutdown... Aug 26 00:39:12 klipsch systemd[1]: Started Entropy daemon using the HAVEGE algorithm. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Network Time Synchronization being skipped. Aug 26 00:39:12 klipsch systemd[1]: Starting RPC bind portmap service... Aug 26 00:39:12 klipsch kernel: 8021q: 802.1Q VLAN Support v1.8 Aug 26 00:39:12 klipsch systemd[1]: Started Update UTMP about System Boot/Shutdown. Aug 26 00:39:12 klipsch systemd[1]: Reached target System Initialization. Aug 26 00:39:12 klipsch systemd[1]: Started Daily Cleanup of Temporary Directories. Aug 26 00:39:12 klipsch systemd[1]: Started Daily apt download activities. Aug 26 00:39:12 klipsch systemd[1]: Started Daily apt upgrade and clean activities. Aug 26 00:39:12 klipsch systemd[1]: Listening on triggerhappy.socket. Aug 26 00:39:12 klipsch systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket. Aug 26 00:39:12 klipsch systemd[1]: Listening on D-Bus System Message Bus Socket. Aug 26 00:39:12 klipsch systemd[1]: Reached target Sockets. Aug 26 00:39:12 klipsch systemd[1]: Reached target Basic System. Aug 26 00:39:12 klipsch systemd[1]: Starting Login Service... Aug 26 00:39:12 klipsch systemd[1]: Started Volumio Log Rotation Service. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Volumio SSH enabler being skipped. Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped. Aug 26 00:39:12 klipsch systemd[1]: Started UPnP Renderer front-end to MPD. Aug 26 00:39:12 klipsch systemd[1]: Started Manage Sound Card State (restore and store). Aug 26 00:39:12 klipsch systemd[1]: Starting Save/Restore Sound Card State... Aug 26 00:39:12 klipsch systemd[1]: Starting Avahi mDNS/DNS-SD Stack... Aug 26 00:39:12 klipsch alsactl[839]: alsactl 1.1.8 daemon started Aug 26 00:39:12 klipsch systemd[1]: Starting Wireless Services... Aug 26 00:39:12 klipsch systemd[1]: Started volumio-remote-updater.service. Aug 26 00:39:12 klipsch systemd[1]: Started D-Bus System Message Bus. Aug 26 00:39:12 klipsch systemd[1]: Starting WPA supplicant... Aug 26 00:39:12 klipsch systemd[1]: Starting triggerhappy global hotkey daemon... Aug 26 00:39:12 klipsch systemd[1]: Started Volumio Iptables Module. Aug 26 00:39:12 klipsch systemd[1]: Starting Bluetooth service... Aug 26 00:39:12 klipsch systemd[1]: Condition check resulted in Copy user wpa_supplicant.conf being skipped. Aug 26 00:39:12 klipsch systemd[1]: Starting DHCP Client Daemon... Aug 26 00:39:12 klipsch systemd-logind[835]: New seat seat0. Aug 26 00:39:12 klipsch systemd[1]: Started Daily man-db regeneration. Aug 26 00:39:12 klipsch systemd[1]: Reached target Timers. Aug 26 00:39:12 klipsch thd[849]: Unable to parse trigger line: Aug 26 00:39:12 klipsch thd[849]: Unable to parse trigger line: KEY_MIN_INTERESTING 1 /usr/local/bin/volumio volume toggle Aug 26 00:39:12 klipsch thd[849]: Unable to parse trigger line: Aug 26 00:39:12 klipsch thd[849]: Found socket passed from systemd Aug 26 00:39:12 klipsch thd[849]: Device /dev/input/event7 not suitable. Aug 26 00:39:12 klipsch systemd[1]: Started Save/Restore Sound Card State. Aug 26 00:39:12 klipsch systemd[1]: Reached target Sound Card. Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event2 (Power Button) Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event0 (Power Button) Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event1 (Sleep Button) Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event3 (MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ) Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event5 (MOSART Semi. Rapoo 2.4G Wireless Touch Desktop Consumer Control) Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event6 (MOSART Semi. Rapoo 2.4G Wireless Touch Desktop System Control) Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event9 (Logitech G305) Aug 26 00:39:12 klipsch avahi-daemon[841]: Found user 'avahi' (UID 111) and group 'avahi' (GID 113). Aug 26 00:39:12 klipsch avahi-daemon[841]: Successfully dropped root privileges. Aug 26 00:39:12 klipsch avahi-daemon[841]: avahi-daemon 0.7 starting up. Aug 26 00:39:12 klipsch systemd-logind[835]: Watching system buttons on /dev/input/event10 (Nuvoton w836x7hg Infrared Remote Transceiver) Aug 26 00:39:12 klipsch bluetoothd[851]: Bluetooth daemon 5.50 Aug 26 00:39:12 klipsch volumio-remote-updater[846]: Error: No active session Aug 26 00:39:12 klipsch bluetoothd[851]: Unknown key AutoConnectTimeout for group General in /etc/bluetooth/main.conf Aug 26 00:39:12 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:12] [info] asio async_connect error: system:111 (Connection refused) Aug 26 00:39:12 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:12] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Aug 26 00:39:12 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:12] [error] handle_connect error: Underlying Transport Error Aug 26 00:39:12 klipsch dbus-daemon[847]: [system] Successfully activated service 'org.freedesktop.systemd1' Aug 26 00:39:12 klipsch systemd[1]: Started Login Service. Aug 26 00:39:12 klipsch systemd[1]: Started RPC bind portmap service. Aug 26 00:39:12 klipsch avahi-daemon[841]: Successfully called chroot(). Aug 26 00:39:12 klipsch avahi-daemon[841]: Successfully dropped remaining capabilities. Aug 26 00:39:12 klipsch systemd[1]: Started triggerhappy global hotkey daemon. Aug 26 00:39:12 klipsch wpa_supplicant[848]: Successfully initialized wpa_supplicant Aug 26 00:39:12 klipsch bluetoothd[851]: Starting SDP server Aug 26 00:39:12 klipsch bluetoothd[851]: Excluding (cli) sap Aug 26 00:39:12 klipsch systemd[1]: Started WPA supplicant. Aug 26 00:39:12 klipsch systemd[1]: Started Bluetooth service. Aug 26 00:39:12 klipsch avahi-daemon[841]: Loading service file /services/volumio.service. Aug 26 00:39:12 klipsch systemd[1]: Started Avahi mDNS/DNS-SD Stack. Aug 26 00:39:12 klipsch systemd[1]: Reached target Bluetooth. Aug 26 00:39:12 klipsch systemd[1]: Reached target RPC Port Mapper. Aug 26 00:39:12 klipsch avahi-daemon[841]: Network interface enumeration completed. Aug 26 00:39:12 klipsch systemd[1]: Reached target Remote File Systems (Pre). Aug 26 00:39:12 klipsch avahi-daemon[841]: Server startup complete. Host name is klipsch.local. Local service cookie is 510194364. Aug 26 00:39:12 klipsch systemd[1]: Reached target Remote File Systems. Aug 26 00:39:12 klipsch avahi-daemon[841]: Service "Klipsch" (/services/volumio.service) successfully established. Aug 26 00:39:12 klipsch sh[759]: wlan0=wlan0 Aug 26 00:39:12 klipsch systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling... Aug 26 00:39:12 klipsch kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Aug 26 00:39:12 klipsch kernel: Bluetooth: BNEP filters: protocol multicast Aug 26 00:39:12 klipsch kernel: Bluetooth: BNEP socket layer initialized Aug 26 00:39:12 klipsch bluetoothd[851]: Bluetooth management interface 1.22 initialized Aug 26 00:39:12 klipsch dbus-daemon[847]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=851 comm="/usr/lib/bluetooth/bluetoothd --noplugin=sap ") Aug 26 00:39:12 klipsch kernel: Bluetooth: MGMT ver 1.22 Aug 26 00:39:12 klipsch volumio[837]: Could not open config: /tmp/upmpdcli.conf Aug 26 00:39:12 klipsch haveged[816]: haveged: ver: 1.9.1; arch: x86; vend: GenuineIntel; build: (gcc 8.3.0 ITV); collect: 128K Aug 26 00:39:12 klipsch haveged[816]: haveged: cpu: (L4 VC); data: 24K (L4 V); inst: 32K (L4 V); idx: 24/40; sz: 31410/52825 Aug 26 00:39:12 klipsch haveged[816]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.00001 Aug 26 00:39:12 klipsch haveged[816]: haveged: fills: 0, generated: 0 Aug 26 00:39:12 klipsch kernel: Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) Aug 26 00:39:13 klipsch systemd[1]: upmpdcli.service: Main process exited, code=exited, status=1/FAILURE Aug 26 00:39:13 klipsch systemd[1]: upmpdcli.service: Failed with result 'exit-code'. Aug 26 00:39:13 klipsch systemd[1]: Starting Hostname Service... Aug 26 00:39:13 klipsch systemd[1]: Started Raise network interfaces. Aug 26 00:39:13 klipsch systemd[1]: Reached target Network. Aug 26 00:39:13 klipsch systemd[1]: Reached target Network is Online. Aug 26 00:39:13 klipsch systemd[1]: Starting LSB: Brings up/down network automatically... Aug 26 00:39:13 klipsch systemd[1]: Starting Network Time Service... Aug 26 00:39:13 klipsch systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Aug 26 00:39:13 klipsch systemd[1]: Starting Permit User Sessions... Aug 26 00:39:13 klipsch systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped. Aug 26 00:39:13 klipsch systemd[1]: Starting Samba NMB Daemon... Aug 26 00:39:13 klipsch systemd[1]: Starting /etc/rc.local Compatibility... Aug 26 00:39:13 klipsch systemd[1]: Started /etc/rc.local Compatibility. Aug 26 00:39:13 klipsch systemd[1]: Started Permit User Sessions. Aug 26 00:39:13 klipsch systemd[1]: Starting Hold until boot process finishes up... Aug 26 00:39:13 klipsch systemd[1]: Starting Terminate Plymouth Boot Screen... Aug 26 00:39:13 klipsch sh[763]: eth0: waiting for carrier Aug 26 00:39:13 klipsch sh[763]: eth0: carrier acquired Aug 26 00:39:13 klipsch dhcpcd[806]: eth0: waiting for carrier Aug 26 00:39:13 klipsch kernel: r8169 0000:02:00.0 eth0: Link is Down Aug 26 00:39:13 klipsch systemd[1]: Received SIGRTMIN+21 from PID 370 (plymouthd). Aug 26 00:39:13 klipsch dhcpcd[852]: DUID 00:04:65:ef:fc:7b:4b:05:b1:76:b6:b3:c0:7c:d1:c0:22:9f Aug 26 00:39:13 klipsch dhcpcd[852]: wlan0: IAID 83:6b:6d:4f Aug 26 00:39:13 klipsch dhcpcd[852]: wlan0: adding address fe80::bcaf:c645:dca4:4fad Aug 26 00:39:13 klipsch dhcpcd[852]: ipv6_addaddr1: Permission denied Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: waiting for carrier Aug 26 00:39:13 klipsch dhcpcd[852]: wlan0: carrier lost Aug 26 00:39:13 klipsch dhcpcd[806]: eth0: carrier acquired Aug 26 00:39:13 klipsch dhcpcd[852]: DUID 00:04:65:ef:fc:7b:4b:05:b1:76:b6:b3:c0:7c:d1:c0:22:9f Aug 26 00:39:13 klipsch dhcpcd[852]: wlan0: IAID 83:6b:6d:4f Aug 26 00:39:13 klipsch dhcpcd[852]: wlan0: adding address fe80::bcaf:c645:dca4:4fad Aug 26 00:39:13 klipsch dhcpcd[852]: ipv6_addaddr1: Permission denied Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: waiting for carrier Aug 26 00:39:13 klipsch dhcpcd[852]: wlan0: carrier lost Aug 26 00:39:13 klipsch ifplugd(eth0)[985]: ifplugd 0.28 initializing. Aug 26 00:39:13 klipsch ifplugd(eth0)[985]: Using interface eth0/C0:7C:D1:C0:22:9F with driver (version: 6.6.32-volumio) Aug 26 00:39:13 klipsch ifplugd(eth0)[985]: Using detection mode: SIOCETHTOOL Aug 26 00:39:13 klipsch ifplugd(eth0)[985]: Initialization complete, link beat not detected. Aug 26 00:39:13 klipsch sh[763]: DUID 00:04:65:ef:fc:7b:4b:05:b1:76:b6:b3:c0:7c:d1:c0:22:9f Aug 26 00:39:13 klipsch sh[763]: eth0: IAID d1:c0:22:9f Aug 26 00:39:13 klipsch sh[763]: eth0: adding address fe80::345e:4b6a:e1d:9709 Aug 26 00:39:13 klipsch sh[763]: ipv6_addaddr1: Permission denied Aug 26 00:39:13 klipsch dhcpcd[806]: DUID 00:04:65:ef:fc:7b:4b:05:b1:76:b6:b3:c0:7c:d1:c0:22:9f Aug 26 00:39:13 klipsch dhcpcd[806]: eth0: IAID d1:c0:22:9f Aug 26 00:39:13 klipsch dhcpcd[806]: eth0: adding address fe80::345e:4b6a:e1d:9709 Aug 26 00:39:13 klipsch dhcpcd[806]: ipv6_addaddr1: Permission denied Aug 26 00:39:13 klipsch ntpd[948]: ntpd 4.2.8p12@1.3728-o (1): Starting Aug 26 00:39:13 klipsch ntpd[948]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:103 Aug 26 00:39:13 klipsch systemd[1]: Started Network Time Service. Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: carrier acquired Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: carrier acquired Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: IAID d1:c0:22:9f Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: adding address fe80::345e:4b6a:e1d:9709 Aug 26 00:39:13 klipsch dhcpcd[852]: ipv6_addaddr1: Permission denied Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: IAID d1:c0:22:9f Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: adding address fe80::345e:4b6a:e1d:9709 Aug 26 00:39:13 klipsch dhcpcd[852]: ipv6_addaddr1: Permission denied Aug 26 00:39:13 klipsch ntpd[998]: proto: precision = 0.200 usec (-22) Aug 26 00:39:13 klipsch ntpd[998]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Aug 26 00:39:13 klipsch ntpd[998]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2022-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Aug 26 00:39:13 klipsch ntpd[998]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): expired less than 607 days ago Aug 26 00:39:13 klipsch ntpd[998]: Listen and drop on 0 v6wildcard [::]:123 Aug 26 00:39:13 klipsch ntpd[998]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Aug 26 00:39:13 klipsch ntpd[998]: Listen normally on 2 lo 127.0.0.1:123 Aug 26 00:39:13 klipsch ntpd[998]: Listening on routing socket on fd #19 for interface updates Aug 26 00:39:13 klipsch ntpd[998]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 26 00:39:13 klipsch ntpd[998]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: soliciting an IPv6 router Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: soliciting an IPv6 router Aug 26 00:39:13 klipsch systemd[1]: Received SIGRTMIN+21 from PID 370 (plymouthd). Aug 26 00:39:13 klipsch systemd[1]: plymouth-quit.service: Succeeded. Aug 26 00:39:13 klipsch systemd[1]: Started Terminate Plymouth Boot Screen. Aug 26 00:39:13 klipsch ifplugd[946]: Network Interface Plugging Daemon...start eth0...done. Aug 26 00:39:13 klipsch systemd[1]: Started LSB: Brings up/down network automatically. Aug 26 00:39:13 klipsch systemd[1]: plymouth-quit-wait.service: Succeeded. Aug 26 00:39:13 klipsch systemd[1]: Started Hold until boot process finishes up. Aug 26 00:39:13 klipsch loadcpufreq[906]: Loading cpufreq kernel modules...done (acpi-cpufreq). Aug 26 00:39:13 klipsch dbus-daemon[847]: [system] Successfully activated service 'org.freedesktop.hostname1' Aug 26 00:39:13 klipsch systemd[1]: Started Getty on tty1. Aug 26 00:39:13 klipsch systemd[1]: Reached target Login Prompts. Aug 26 00:39:13 klipsch systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling. Aug 26 00:39:13 klipsch systemd[1]: Started Hostname Service. Aug 26 00:39:13 klipsch systemd[1]: Starting LSB: set CPUFreq kernel parameters... Aug 26 00:39:13 klipsch systemd[1]: iptables.service: Succeeded. Aug 26 00:39:13 klipsch cpufrequtils[1027]: CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done. Aug 26 00:39:13 klipsch systemd[1]: Started LSB: set CPUFreq kernel parameters. Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: carrier lost Aug 26 00:39:13 klipsch dhcpcd[852]: eth0: carrier lost Aug 26 00:39:13 klipsch sh[763]: eth0: soliciting a DHCP lease Aug 26 00:39:13 klipsch sh[763]: eth0: carrier lost Aug 26 00:39:13 klipsch dhcpcd[806]: eth0: soliciting a DHCP lease Aug 26 00:39:13 klipsch dhcpcd[806]: eth0: carrier lost Aug 26 00:39:13 klipsch nmbd[961]: [2024/08/26 00:39:13.674703, 0] ../source3/nmbd/asyncdns.c:158(start_async_dns) Aug 26 00:39:13 klipsch nmbd[961]: started asyncdns process 1044 Aug 26 00:39:13 klipsch nmbd[961]: [2024/08/26 00:39:13.676306, 0] ../lib/util/become_daemon.c:149(daemon_status) Aug 26 00:39:13 klipsch nmbd[961]: daemon_status: STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ... Aug 26 00:39:13 klipsch nmbd[961]: [2024/08/26 00:39:13.676418, 0] ../source3/nmbd/nmbd_subnetdb.c:254(create_subnets) Aug 26 00:39:13 klipsch nmbd[961]: NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6). Aug 26 00:39:13 klipsch wireless.js[845]: Cleaning previous... Aug 26 00:39:13 klipsch sudo[1065]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Aug 26 00:39:13 klipsch sudo[1065]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:14 klipsch sudo[1065]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:14 klipsch sudo[1067]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Aug 26 00:39:14 klipsch sudo[1067]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:14 klipsch sudo[1067]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:14 klipsch wireless.js[845]: Stopped aP Aug 26 00:39:14 klipsch sudo[1074]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Aug 26 00:39:14 klipsch sudo[1074]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:14 klipsch ntpd[998]: error resolving pool 0.debian.pool.ntp.org: System error (-11) Aug 26 00:39:14 klipsch sudo[1074]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:14 klipsch sudo[1076]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg get Aug 26 00:39:14 klipsch sudo[1076]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:14 klipsch sudo[1076]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:14 klipsch sudo[1083]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Aug 26 00:39:14 klipsch sudo[1083]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:14 klipsch sudo[1083]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:14 klipsch sudo[1085]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw wlan0 scan Aug 26 00:39:14 klipsch sudo[1085]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:15 klipsch ntpd[998]: error resolving pool 1.debian.pool.ntp.org: System error (-11) Aug 26 00:39:16 klipsch ntpd[998]: error resolving pool 2.debian.pool.ntp.org: System error (-11) Aug 26 00:39:17 klipsch systemd[1]: systemd-rfkill.service: Succeeded. Aug 26 00:39:17 klipsch ntpd[998]: error resolving pool 3.debian.pool.ntp.org: System error (-11) Aug 26 00:39:17 klipsch sudo[1085]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:17 klipsch wireless.js[845]: Start wireless flow Aug 26 00:39:17 klipsch wireless.js[845]: Stopped hotspot (if there).. Aug 26 00:39:17 klipsch sudo[1090]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Aug 26 00:39:17 klipsch sudo[1090]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:17 klipsch sudo[1090]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:17 klipsch sudo[1092]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Aug 26 00:39:17 klipsch sudo[1092]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:17 klipsch sudo[1092]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:17 klipsch wireless.js[845]: DHCP IP Aug 26 00:39:17 klipsch wpa_supplicant[1094]: Successfully initialized wpa_supplicant Aug 26 00:39:17 klipsch wireless.js[845]: Start ap Aug 26 00:39:17 klipsch sudo[1095]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/dhcpcd Aug 26 00:39:17 klipsch sudo[1095]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:17 klipsch dhcpcd[1096]: sending commands to master dhcpcd process Aug 26 00:39:17 klipsch dhcpcd[852]: control command: /sbin/dhcpcd Aug 26 00:39:17 klipsch dhcpcd[852]: control command: /sbin/dhcpcd Aug 26 00:39:17 klipsch sudo[1095]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:17 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:17] [info] asio async_connect error: system:111 (Connection refused) Aug 26 00:39:17 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:17] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Aug 26 00:39:17 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:17] [error] handle_connect error: Underlying Transport Error Aug 26 00:39:18 klipsch wireless.js[845]: trying... Aug 26 00:39:18 klipsch sudo[1101]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:18 klipsch sudo[1101]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:18 klipsch sudo[1101]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:19 klipsch wireless.js[845]: trying... Aug 26 00:39:19 klipsch sudo[1104]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:19 klipsch sudo[1104]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:19 klipsch sudo[1104]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:20 klipsch wireless.js[845]: trying... Aug 26 00:39:20 klipsch sudo[1107]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:20 klipsch sudo[1107]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:20 klipsch sudo[1107]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:21 klipsch wpa_supplicant[1099]: wlan0: SME: Trying to authenticate with d4:3d:f3:c8:20:5e (SSID='Zyxel_205D' freq=5560 MHz) Aug 26 00:39:21 klipsch kernel: wlan0: authenticate with d4:3d:f3:c8:20:5e Aug 26 00:39:21 klipsch kernel: wlan0: send auth to d4:3d:f3:c8:20:5e (try 1/3) Aug 26 00:39:21 klipsch wpa_supplicant[1099]: wlan0: Trying to associate with d4:3d:f3:c8:20:5e (SSID='Zyxel_205D' freq=5560 MHz) Aug 26 00:39:21 klipsch kernel: wlan0: authenticated Aug 26 00:39:21 klipsch kernel: wlan0: associate with d4:3d:f3:c8:20:5e (try 1/3) Aug 26 00:39:21 klipsch kernel: wlan0: RX AssocResp from d4:3d:f3:c8:20:5e (capab=0x1011 status=0 aid=18) Aug 26 00:39:21 klipsch wpa_supplicant[1099]: wlan0: Associated with d4:3d:f3:c8:20:5e Aug 26 00:39:21 klipsch kernel: wlan0: associated Aug 26 00:39:21 klipsch wpa_supplicant[1099]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 Aug 26 00:39:21 klipsch wpa_supplicant[1099]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=NO Aug 26 00:39:21 klipsch kernel: wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by d4:3d:f3:c8:20:5e Aug 26 00:39:21 klipsch wpa_supplicant[1099]: wlan0: WPA: Key negotiation completed with d4:3d:f3:c8:20:5e [PTK=CCMP GTK=CCMP] Aug 26 00:39:21 klipsch wpa_supplicant[1099]: wlan0: CTRL-EVENT-CONNECTED - Connection to d4:3d:f3:c8:20:5e completed [id=0 id_str=] Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: carrier acquired Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: carrier acquired Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: IAID 83:6b:6d:4f Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: IAID 83:6b:6d:4f Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: rebinding lease of 192.168.80.122 Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: rebinding lease of 192.168.80.122 Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: probing address 192.168.80.122/24 Aug 26 00:39:21 klipsch dhcpcd[852]: wlan0: probing address 192.168.80.122/24 Aug 26 00:39:21 klipsch wireless.js[845]: trying... Aug 26 00:39:21 klipsch sudo[1126]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:21 klipsch sudo[1126]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:21 klipsch sudo[1126]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:22 klipsch dhcpcd[852]: wlan0: soliciting an IPv6 router Aug 26 00:39:22 klipsch dhcpcd[852]: wlan0: soliciting an IPv6 router Aug 26 00:39:22 klipsch wireless.js[845]: trying... Aug 26 00:39:22 klipsch sudo[1129]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:22 klipsch sudo[1129]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:22 klipsch sudo[1129]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:23 klipsch wireless.js[845]: trying... Aug 26 00:39:23 klipsch sudo[1132]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:23 klipsch sudo[1132]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:23 klipsch sudo[1132]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:24 klipsch wireless.js[845]: trying... Aug 26 00:39:24 klipsch sudo[1135]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:24 klipsch sudo[1135]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:24 klipsch sudo[1135]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:25 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:25] [info] asio async_connect error: system:111 (Connection refused) Aug 26 00:39:25 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:25] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Aug 26 00:39:25 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:25] [error] handle_connect error: Underlying Transport Error Aug 26 00:39:25 klipsch wireless.js[845]: trying... Aug 26 00:39:25 klipsch sudo[1138]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:25 klipsch sudo[1138]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:25 klipsch sudo[1138]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:26 klipsch dhcpcd[852]: wlan0: leased 192.168.80.122 for 86400 seconds Aug 26 00:39:26 klipsch dhcpcd[852]: wlan0: leased 192.168.80.122 for 86400 seconds Aug 26 00:39:26 klipsch avahi-daemon[841]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.80.122. Aug 26 00:39:26 klipsch dhcpcd[852]: wlan0: adding route to 192.168.80.0/24 Aug 26 00:39:26 klipsch dhcpcd[852]: wlan0: adding route to 192.168.80.0/24 Aug 26 00:39:26 klipsch dhcpcd[852]: wlan0: adding default route via 192.168.80.1 Aug 26 00:39:26 klipsch avahi-daemon[841]: New relevant interface wlan0.IPv4 for mDNS. Aug 26 00:39:26 klipsch avahi-daemon[841]: Registering new address record for 192.168.80.122 on wlan0.IPv4. Aug 26 00:39:26 klipsch dhcpcd[852]: wlan0: adding default route via 192.168.80.1 Aug 26 00:39:26 klipsch ntpd[998]: ntpd exiting on signal 15 (Terminated) Aug 26 00:39:26 klipsch systemd[1]: Stopping Network Time Service... Aug 26 00:39:26 klipsch systemd[1]: ntp.service: Succeeded. Aug 26 00:39:26 klipsch systemd[1]: Stopped Network Time Service. Aug 26 00:39:26 klipsch systemd[1]: Starting Network Time Service... Aug 26 00:39:26 klipsch ntpd[1175]: ntpd 4.2.8p12@1.3728-o (1): Starting Aug 26 00:39:26 klipsch ntpd[1175]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:103 Aug 26 00:39:26 klipsch systemd[1]: Started Network Time Service. Aug 26 00:39:26 klipsch ntpd[1181]: proto: precision = 0.200 usec (-22) Aug 26 00:39:26 klipsch ntpd[1181]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Aug 26 00:39:26 klipsch ntpd[1181]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2022-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Aug 26 00:39:26 klipsch ntpd[1181]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): expired less than 607 days ago Aug 26 00:39:26 klipsch ntpd[1181]: Listen and drop on 0 v6wildcard [::]:123 Aug 26 00:39:26 klipsch ntpd[1181]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Aug 26 00:39:26 klipsch ntpd[1181]: Listen normally on 2 lo 127.0.0.1:123 Aug 26 00:39:26 klipsch dhcpcd[852]: forked to background, child pid 1182 Aug 26 00:39:26 klipsch ntpd[1181]: Listen normally on 3 wlan0 192.168.80.122:123 Aug 26 00:39:26 klipsch dhcpcd[852]: forked to background, child pid 1182 Aug 26 00:39:26 klipsch ntpd[1181]: Listening on routing socket on fd #20 for interface updates Aug 26 00:39:26 klipsch ntpd[1181]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 26 00:39:26 klipsch ntpd[1181]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Aug 26 00:39:26 klipsch systemd[1]: Started DHCP Client Daemon. Aug 26 00:39:26 klipsch wireless.js[845]: trying... Aug 26 00:39:26 klipsch sudo[1185]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Aug 26 00:39:26 klipsch sudo[1185]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:26 klipsch sudo[1185]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:26 klipsch wireless.js[845]: Connected to: ----Zyxel_205D Aug 26 00:39:26 klipsch wireless.js[845]: ---- Aug 26 00:39:26 klipsch sudo[1188]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Aug 26 00:39:26 klipsch sudo[1188]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:26 klipsch sudo[1188]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:26 klipsch wireless.js[845]: ... joined AP, wlan0 IPv4 is 192.168.80.122, ipV6 is undefined Aug 26 00:39:26 klipsch wireless.js[845]: It's done! AP Aug 26 00:39:26 klipsch systemd[1]: Started Wireless Services. Aug 26 00:39:26 klipsch systemd[1]: Started Volumio Backend Module. Aug 26 00:39:26 klipsch systemd[1]: Started Start Volumio Kiosk. Aug 26 00:39:26 klipsch systemd[1]: Started Intel SST and HDA soundcard init service. Aug 26 00:39:26 klipsch systemd[1]: Started Volumio Cpu Tweaker. Aug 26 00:39:26 klipsch volumio-cpu-tweak[1196]: Setting RT Priority for mpd Aug 26 00:39:26 klipsch volumio-cpu-tweak[1196]: pid 35's current scheduling policy: SCHED_FIFO Aug 26 00:39:26 klipsch volumio-cpu-tweak[1196]: pid 35's current scheduling priority: 99 Aug 26 00:39:26 klipsch volumio-cpu-tweak[1196]: Setting MPD Affinity Aug 26 00:39:26 klipsch volumio-cpu-tweak[1196]: pid 3's current affinity mask: f Aug 26 00:39:26 klipsch volumio-cpu-tweak[1196]: VOLUMIO CPU TWEAK: Setting CPU Governor: performance Aug 26 00:39:27 klipsch systemd[1]: volumio_cpu_tweak.service: Succeeded. Aug 26 00:39:27 klipsch startx[1194]: X.Org X Server 1.20.4 Aug 26 00:39:27 klipsch startx[1194]: X Protocol Version 11, Revision 0 Aug 26 00:39:27 klipsch startx[1194]: Build Operating System: Linux 5.10.0-10-amd64 x86_64 Debian Aug 26 00:39:27 klipsch startx[1194]: Current Operating System: Linux klipsch 6.6.32-volumio #2 SMP PREEMPT_DYNAMIC Wed May 29 23:04:42 CEST 2024 x86_64 Aug 26 00:39:27 klipsch startx[1194]: Kernel command line: BOOT_IMAGE=/vmlinuz initramfs.clear splash plymouth.ignore-serial-consoles quiet loglevel=0 biosdevname=0 imgpart=UUID=7d0353a6-075a-49d1-ac7a-eb2640af4ca5 bootpart=UUID=F358-EDD3 datapart=UUID=1499fcc8-deb6-4a38-afb3-9b0af347f0bc hwdevice=x86 uuidconfig=syslinux.cfg,efi/BOOT/grub.cfg imgfile=/volumio_current.sqsh logo.nologo vt.global_cursor_default=0 acpi_backlight=vendor net.ifnames=0 use_kmsg=no Aug 26 00:39:27 klipsch startx[1194]: Build Date: 18 December 2021 09:05:36AM Aug 26 00:39:27 klipsch startx[1194]: xorg-server 2:1.20.4-1+deb10u4 (https://www.debian.org/support) Aug 26 00:39:27 klipsch startx[1194]: Current version of pixman: 0.36.0 Aug 26 00:39:27 klipsch startx[1194]: Before reporting problems, check http://wiki.x.org Aug 26 00:39:27 klipsch startx[1194]: to make sure that you have the latest version. Aug 26 00:39:27 klipsch startx[1194]: Markers: (--) probed, (**) from config file, (==) default setting, Aug 26 00:39:27 klipsch startx[1194]: (++) from command line, (!!) notice, (II) informational, Aug 26 00:39:27 klipsch startx[1194]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown. Aug 26 00:39:27 klipsch startx[1194]: (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 26 00:39:27 2024 Aug 26 00:39:27 klipsch startx[1194]: (==) Using system config directory "/usr/share/X11/xorg.conf.d" Aug 26 00:39:27 klipsch kernel: broken atomic modeset userspace detected, disabling atomic Aug 26 00:39:27 klipsch ntpd[1181]: Soliciting pool server 80.89.32.122 Aug 26 00:39:27 klipsch soundcard-init.sh[1195]: Simple mixer control 'Master',0 Aug 26 00:39:27 klipsch soundcard-init.sh[1195]: Capabilities: pvolume pswitch Aug 26 00:39:27 klipsch soundcard-init.sh[1195]: Playback channels: Front Left - Front Right Aug 26 00:39:27 klipsch soundcard-init.sh[1195]: Limits: Playback 0 - 87 Aug 26 00:39:27 klipsch soundcard-init.sh[1195]: Mono: Aug 26 00:39:27 klipsch soundcard-init.sh[1195]: Front Left: Playback 66 [76%] [-15.75dB] [on] Aug 26 00:39:27 klipsch soundcard-init.sh[1195]: Front Right: Playback 66 [76%] [-15.75dB] [on] Aug 26 00:39:27 klipsch systemd[1]: soundcard-init.service: Succeeded. Aug 26 00:39:28 klipsch startx[1194]: (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. Aug 26 00:39:28 klipsch ntpd[1181]: Soliciting pool server 185.41.243.43 Aug 26 00:39:28 klipsch nmbd[961]: [2024/08/26 00:39:28.681384, 0] ../lib/util/become_daemon.c:138(daemon_ready) Aug 26 00:39:28 klipsch nmbd[961]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections Aug 26 00:39:28 klipsch systemd[1]: Started Samba NMB Daemon. Aug 26 00:39:28 klipsch systemd[1]: Starting Samba Winbind Daemon... Aug 26 00:39:28 klipsch volumio[1193]: info: ------------------------------------------- Aug 26 00:39:28 klipsch volumio[1193]: info: ----- Volumio3 ---- Aug 26 00:39:28 klipsch volumio[1193]: info: ------------------------------------------- Aug 26 00:39:28 klipsch volumio[1193]: info: ----- System startup ---- Aug 26 00:39:28 klipsch volumio[1193]: info: ------------------------------------------- Aug 26 00:39:28 klipsch ntpd[1181]: Soliciting pool server 79.160.225.13 Aug 26 00:39:28 klipsch winbindd[1349]: [2024/08/26 00:39:28.959206, 0] ../source3/winbindd/winbindd_cache.c:3160(initialize_winbindd_cache) Aug 26 00:39:28 klipsch winbindd[1349]: initialize_winbindd_cache: clearing cache and re-creating with version number 2 Aug 26 00:39:28 klipsch winbindd[1349]: [2024/08/26 00:39:28.965494, 0] ../lib/util/become_daemon.c:138(daemon_ready) Aug 26 00:39:28 klipsch winbindd[1349]: daemon_ready: STATUS=daemon 'winbindd' finished starting up and ready to serve connections Aug 26 00:39:28 klipsch systemd[1]: Started Samba Winbind Daemon. Aug 26 00:39:28 klipsch systemd[1]: Starting Samba SMB Daemon... Aug 26 00:39:29 klipsch smbd[1355]: [2024/08/26 00:39:29.316669, 0] ../lib/util/become_daemon.c:138(daemon_ready) Aug 26 00:39:29 klipsch systemd[1]: Started Samba SMB Daemon. Aug 26 00:39:29 klipsch smbd[1355]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections Aug 26 00:39:29 klipsch systemd[1]: Reached target Multi-User System. Aug 26 00:39:29 klipsch systemd[1]: Reached target Graphical Interface. Aug 26 00:39:29 klipsch systemd[1]: Starting Update UTMP about System Runlevel Changes... Aug 26 00:39:29 klipsch systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. Aug 26 00:39:29 klipsch systemd[1]: Started Update UTMP about System Runlevel Changes. Aug 26 00:39:29 klipsch systemd[1]: Startup finished in 5.638s (firmware) + 2.414s (loader) + 10.070s (kernel) + 20.197s (userspace) = 38.321s. Aug 26 00:39:29 klipsch ntpd[1181]: Soliciting pool server 185.35.202.197 Aug 26 00:39:29 klipsch ntpd[1181]: Soliciting pool server 185.175.56.208 Aug 26 00:39:29 klipsch ntpd[1181]: Soliciting pool server 192.36.143.130 Aug 26 00:39:29 klipsch volumio[1193]: info: MYVOLUMIO Environment detected Aug 26 00:39:30 klipsch volumio[1193]: info: Plugin folders cleanup Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning into folder /volumio/app/plugins/ Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category audio_interface Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category miscellanea Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category music_service Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category plugins.json Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category system_controller Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category user_interface Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning into folder /data/plugins/ Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category audio_interface Aug 26 00:39:30 klipsch volumio[1193]: info: Scanning category music_service Aug 26 00:39:30 klipsch volumio[1193]: info: Plugin folders cleanup completed Aug 26 00:39:30 klipsch volumio[1193]: info: ------------------------------------------- Aug 26 00:39:30 klipsch volumio[1193]: info: ----- Core plugins startup ---- Aug 26 00:39:30 klipsch volumio[1193]: info: ------------------------------------------- Aug 26 00:39:30 klipsch volumio[1193]: info: Loading plugins from folder /volumio/app/plugins/ Aug 26 00:39:30 klipsch volumio[1193]: info: Adding plugin upnp to MyMusic Plugins Aug 26 00:39:30 klipsch volumio[1193]: info: Adding plugin airplay_emulation to MyMusic Plugins Aug 26 00:39:30 klipsch volumio[1193]: info: Adding plugin upnp_browser to MyMusic Plugins Aug 26 00:39:30 klipsch volumio[1193]: info: Loading plugins from folder /data/plugins/ Aug 26 00:39:30 klipsch volumio[1193]: info: Loading plugin "system"... Aug 26 00:39:30 klipsch volumio[1193]: info: Loading plugin "appearance"... Aug 26 00:39:30 klipsch ntpd[1181]: Soliciting pool server 152.65.32.101 Aug 26 00:39:30 klipsch ntpd[1181]: Soliciting pool server 162.159.200.123 Aug 26 00:39:30 klipsch ntpd[1181]: Soliciting pool server 62.101.228.30 Aug 26 00:39:30 klipsch ntpd[1181]: Soliciting pool server 193.150.22.56 Aug 26 00:39:31 klipsch ntpd[1181]: Soliciting pool server 162.159.200.1 Aug 26 00:39:31 klipsch ntpd[1181]: Soliciting pool server 185.175.56.95 Aug 26 00:39:31 klipsch ntpd[1181]: Soliciting pool server 185.42.170.200 Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "network"... Aug 26 00:39:32 klipsch volumio[1193]: info: Refreshing Cached IP Addresses Aug 26 00:39:32 klipsch sudo[1428]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Aug 26 00:39:32 klipsch sudo[1428]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:32 klipsch sudo[1428]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:32 klipsch sudo[1430]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Aug 26 00:39:32 klipsch sudo[1430]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "services"... Aug 26 00:39:32 klipsch sudo[1430]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "alsa_controller"... Aug 26 00:39:32 klipsch sudo[1434]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan Aug 26 00:39:32 klipsch sudo[1434]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:32 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "wizard"... Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "networkfs"... Aug 26 00:39:32 klipsch volumio[1193]: info: Starting Udev Watcher for removable devices Aug 26 00:39:32 klipsch volumio[1193]: info: Ignoring mount for partition: boot Aug 26 00:39:32 klipsch volumio[1193]: info: Ignoring mount for partition: volumio Aug 26 00:39:32 klipsch volumio[1193]: info: Ignoring mount for partition: volumio_data Aug 26 00:39:32 klipsch volumio[1193]: error: Cannot associate FS Label, not mounting Aug 26 00:39:32 klipsch volumio[1193]: info: Ignoring mount for partition: 6E348B11348ADB89 Aug 26 00:39:32 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "volumio_command_line_client"... Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "upnp"... Aug 26 00:39:32 klipsch volumio[1193]: info: [1724625572344] Starting Upmpd Daemon Aug 26 00:39:32 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "my_music"... Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "mpd"... Aug 26 00:39:32 klipsch ntpd[1181]: Soliciting pool server 80.203.110.169 Aug 26 00:39:32 klipsch ntpd[1181]: Soliciting pool server 185.181.61.91 Aug 26 00:39:32 klipsch volumio[1193]: info: Loading plugin "upnp_browser"... Aug 26 00:39:33 klipsch volumio[1193]: info: Loading plugin "alarm-clock"... Aug 26 00:39:33 klipsch volumio[1193]: info: Loading plugin "airplay_emulation"... Aug 26 00:39:33 klipsch volumio[1193]: info: Starting Shairport Sync Aug 26 00:39:33 klipsch volumio[1193]: info: Loading plugin "last_100"... Aug 26 00:39:33 klipsch volumio[1193]: info: Loading plugin "webradio"... Aug 26 00:39:33 klipsch volumio[1193]: info: Loading plugin "i2s_dacs"... Aug 26 00:39:33 klipsch volumio[1193]: info: I2S DAC not set, start Auto-detection Aug 26 00:39:33 klipsch volumio[1193]: info: Loading plugin "volumiodiscovery"... Aug 26 00:39:33 klipsch ntpd[1181]: Soliciting pool server 2001:67c:24e4:33::56 Aug 26 00:39:33 klipsch volumio[1193]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Aug 26 00:39:33 klipsch volumio[1193]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 26 00:39:33 klipsch node[1193]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Aug 26 00:39:33 klipsch volumio[1193]: *** WARNING *** For more information see Aug 26 00:39:33 klipsch volumio[1193]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Aug 26 00:39:33 klipsch volumio[1193]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 26 00:39:33 klipsch volumio[1193]: *** WARNING *** For more information see Aug 26 00:39:33 klipsch node[1193]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 26 00:39:33 klipsch node[1193]: *** WARNING *** For more information see Aug 26 00:39:33 klipsch node[1193]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Aug 26 00:39:33 klipsch node[1193]: *** WARNING *** Please fix your application to use the native API of Avahi! Aug 26 00:39:33 klipsch node[1193]: *** WARNING *** For more information see Aug 26 00:39:33 klipsch volumio[1193]: info: Applying required configuration parameters for plugin volumiodiscovery Aug 26 00:39:33 klipsch volumio[1193]: info: Discovery: Started advertising with name: Klipsch Aug 26 00:39:33 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Aug 26 00:39:33 klipsch volumio[1193]: info: Loading plugin "spop"... Aug 26 00:39:34 klipsch volumio[1193]: info: Loading plugin "outputs"... Aug 26 00:39:34 klipsch volumio[1193]: info: Loading plugin "albumart"... Aug 26 00:39:34 klipsch volumio[1193]: info: Plugin example_plugin is not enabled Aug 26 00:39:34 klipsch volumio[1193]: info: Loading plugin "inputs"... Aug 26 00:39:34 klipsch volumio[1193]: info: Loading plugin "updater_comm"... Aug 26 00:39:34 klipsch volumio[1193]: Forking 3 albumart workers Aug 26 00:39:34 klipsch volumio[1193]: info: Plugin mpdemulation is not enabled Aug 26 00:39:34 klipsch volumio[1193]: info: Loading plugin "rest_api"... Aug 26 00:39:34 klipsch volumio[1193]: info: Loading plugin "websocket"... Aug 26 00:39:34 klipsch volumio[1193]: info: Starting Socket.io Server version 2.3.0 Aug 26 00:39:34 klipsch volumio[1193]: info: Plugin fusiondsp is not enabled Aug 26 00:39:34 klipsch volumio[1193]: info: Loading i18n strings for locale no Aug 26 00:39:34 klipsch volumio[1193]: Updating browse sources language Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::initPlayerControls Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: Express server listening on port 3000 Aug 26 00:39:34 klipsch volumio[1193]: [Metrics] WebUI: 7s 150.66ms Aug 26 00:39:34 klipsch volumio[1193]: info: Setting Device type: x86 Aug 26 00:39:34 klipsch volumio[1193]: info: CoreStateMachine::resetVolumioState Aug 26 00:39:34 klipsch volumio[1193]: info: CoreStateMachine::getcurrentVolume Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::volumioRetrievevolume Aug 26 00:39:34 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 26 00:39:34 klipsch volumio[1193]: error: Cannot read config.txt file: Error: ENOENT: no such file or directory, open '/boot/config.txt' Aug 26 00:39:34 klipsch volumio[1193]: info: Completed loading Core Plugins Aug 26 00:39:34 klipsch volumio[1193]: info: Preparing to generate the ALSA configuration file Aug 26 00:39:35 klipsch volumio[1193]: info: Cannot read proc/cpuinfo: Error: Command failed: cat /proc/cpuinfo | grep Revision Aug 26 00:39:35 klipsch volumio[1193]: Starting albumart workers Aug 26 00:39:35 klipsch volumio[1193]: verbose: New Socket.io Connection to 192.168.80.122 from 192.168.80.173 UA: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/128.0.0.0 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 1 Aug 26 00:39:35 klipsch volumio[1193]: verbose: New Socket.io Connection to 192.168.80.122 from 192.168.80.173 UA: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/128.0.0.0 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 2 Aug 26 00:39:35 klipsch volumio[1193]: Starting albumart workers Aug 26 00:39:35 klipsch volumio[1193]: verbose: New Socket.io Connection to 192.168.80.122 from 192.168.80.173 UA: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/128.0.0.0 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 3 Aug 26 00:39:35 klipsch volumio[1193]: Starting albumart workers Aug 26 00:39:35 klipsch volumio[1193]: info: Reloading queue from file Aug 26 00:39:35 klipsch volumio[1193]: info: VolumeController:: Volume=74 Mute =false Aug 26 00:39:35 klipsch volumio[1193]: info: CoreStateMachine::pushState Aug 26 00:39:35 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::volumioPushState Aug 26 00:39:35 klipsch volumio[1193]: info: CoreStateMachine::updateTrackBlock Aug 26 00:39:35 klipsch volumio[1193]: info: CorePlayQueue::getTrackBlock Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::volumioRetrievevolume Aug 26 00:39:35 klipsch volumio[1193]: info: Asound.conf file unchanged, so no further update is needed Aug 26 00:39:35 klipsch volumio[1193]: info: Output device has changed, restarting MPD Aug 26 00:39:35 klipsch volumio[1193]: info: Output device has changed, restarting Shairport Sync Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 26 00:39:35 klipsch sudo[1567]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /etc/mpd.conf Aug 26 00:39:35 klipsch sudo[1567]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:35 klipsch sudo[1567]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:35 klipsch sudo[1569]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart mpd.service Aug 26 00:39:35 klipsch sudo[1569]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:35 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:35] [connect] Successful connection Aug 26 00:39:35 klipsch volumio[1193]: info: Could not detect Primo: Error: Command failed: aplay -l | grep es90x8q2m-dac-dai-0 Aug 26 00:39:35 klipsch volumio[1193]: info: ___________ START PLUGINS ___________ Aug 26 00:39:35 klipsch volumio[1193]: info: ControllerMpd::onStart: Initializing MPD Aug 26 00:39:35 klipsch volumio[1193]: info: Creating MPD Configuration file Aug 26 00:39:35 klipsch systemd[1]: Listening on mpd.socket. Aug 26 00:39:35 klipsch sudo[1581]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /etc/mpd.conf Aug 26 00:39:35 klipsch sudo[1581]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:35 klipsch systemd[1]: Starting Music Player Daemon... Aug 26 00:39:35 klipsch sudo[1581]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Aug 26 00:39:35 klipsch volumio[1193]: info: [1724625575507] CoreMusicLibrary::Adding element Media Servers Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 26 00:39:35 klipsch sudo[1588]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart mpd.service Aug 26 00:39:35 klipsch sudo[1588]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:35 klipsch systemd[1]: mpd.service: Control process exited, code=killed, status=15/TERM Aug 26 00:39:35 klipsch systemd[1]: mpd.service: Succeeded. Aug 26 00:39:35 klipsch systemd[1]: Stopped Music Player Daemon. Aug 26 00:39:35 klipsch volumio[1193]: info: Could not detect Primo: Error: Command failed: aplay -l | grep es90x8q2m-dac-dai-0 Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 26 00:39:35 klipsch systemd[1]: Starting Music Player Daemon... Aug 26 00:39:35 klipsch volumio[1193]: info: Could not detect Primo: Error: Command failed: aplay -l | grep es90x8q2m-dac-dai-0 Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Aug 26 00:39:35 klipsch volumio[1193]: info: [1724625575640] CoreMusicLibrary::Adding element Last_100 Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Aug 26 00:39:35 klipsch volumio[1193]: info: [1724625575644] CoreMusicLibrary::Adding element Webradio Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Aug 26 00:39:35 klipsch volumio[1193]: info: Initializing BBC Radios Aug 26 00:39:35 klipsch sudo[1593]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chown mpd:audio /var/log/mpd.log Aug 26 00:39:35 klipsch sudo[1593]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:35 klipsch sudo[1593]: /bin/chown: cannot access '/var/log/mpd.log': No such file or directory Aug 26 00:39:35 klipsch sudo[1593]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 26 00:39:35 klipsch volumio[1193]: info: Creating Spotify config file Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:35 klipsch volumio[1193]: info: Volumio Calling Home Aug 26 00:39:35 klipsch volumio[1193]: info: CoreStateMachine::setRepeat null single undefined Aug 26 00:39:35 klipsch volumio[1193]: info: CoreStateMachine::pushState Aug 26 00:39:35 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::volumioPushState Aug 26 00:39:35 klipsch volumio[1193]: info: CoreStateMachine::setRandom null Aug 26 00:39:35 klipsch volumio[1193]: info: CoreStateMachine::pushState Aug 26 00:39:35 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::volumioPushState Aug 26 00:39:35 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Aug 26 00:39:35 klipsch volumio-remote-updater[846]: [2024-08-26 00:39:35] [connect] WebSocket Connection 127.0.0.1:3000 v-2 "WebSocket++/0.8.2" /socket.io/?EIO=4&transport=websocket&t=1724625575 101 Aug 26 00:39:35 klipsch volumio[1193]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: WebSocket++/0.8.2 Engine version: 4 Transport: websocket Total Clients: 4 Aug 26 00:39:35 klipsch volumio[1193]: info: MPD Permissions set Aug 26 00:39:35 klipsch volumio[1193]: info: MPD Permissions set Aug 26 00:39:36 klipsch sudo[1434]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:36 klipsch volumio[1193]: info: Discovery: adding d48a481e-abb3-4f77-8a9e-9fcbc084e67a Aug 26 00:39:36 klipsch volumio[1193]: info: Discovery: Found device Klipsch Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:36 klipsch volumio[1193]: info: Spotify config file written Aug 26 00:39:36 klipsch sudo[1630]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart go-librespot-daemon.service Aug 26 00:39:36 klipsch sudo[1630]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetVisibleSources Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Aug 26 00:39:36 klipsch volumio[1193]: info: Received Get System Info Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Aug 26 00:39:36 klipsch volumio[1193]: info: Discovery: Getting this device information Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:36 klipsch systemd[1]: Started go-librespot Daemon. Aug 26 00:39:36 klipsch go-librespot[1633]: Librespot-go daemon starting... Aug 26 00:39:36 klipsch volumio[1193]: info: Listing playlists Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetQueue Aug 26 00:39:36 klipsch volumio[1193]: info: CoreStateMachine::getQueue Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getQueue Aug 26 00:39:36 klipsch sudo[1630]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:36 klipsch volumio[1193]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 5 Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=info msg="generated new device id: 65e572c5bc70bb0d8a9533c295e8773af663505b" Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=debug msg="stored credentials found for buldrus" Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getCPUCoresNumber Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getCPUCoresNumber Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Aug 26 00:39:36 klipsch volumio[1193]: info: Volumio called home Aug 26 00:39:36 klipsch volumio[1193]: info: VolumeController:: Volume=74 Mute =false Aug 26 00:39:36 klipsch volumio[1193]: info: CoreStateMachine::pushState Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioPushState Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=debug msg="fetched new accesspoints: [ap-gew4.spotify.com:4070 ap-gew4.spotify.com:443 ap-gew4.spotify.com:80 ap-gue1.spotify.com:4070 ap-gew1.spotify.com:443 ap-gae2.spotify.com:80]" Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=debug msg="fetched new dealers: [gew4-dealer.spotify.com:443 gue1-dealer.spotify.com:443 gew1-dealer.spotify.com:443 gae2-dealer.spotify.com:443]" Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=debug msg="fetched new spclients: [gew4-spclient.spotify.com:443 gue1-spclient.spotify.com:443 gew1-spclient.spotify.com:443 gae2-spclient.spotify.com:443]" Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=debug msg="zeroconf server listening on port 46655" Aug 26 00:39:36 klipsch volumio[1193]: info: Starting Shairport Sync Aug 26 00:39:36 klipsch volumio[1193]: info: Starting Shairport Sync Aug 26 00:39:36 klipsch sudo[1655]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart shairport-sync Aug 26 00:39:36 klipsch sudo[1655]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:36 klipsch volumio[1193]: info: Starting Shairport Sync Aug 26 00:39:36 klipsch systemd[1]: Stopping Shairport Sync - AirPlay Audio Receiver... Aug 26 00:39:36 klipsch systemd[1]: shairport-sync.service: Succeeded. Aug 26 00:39:36 klipsch systemd[1]: Stopped Shairport Sync - AirPlay Audio Receiver. Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=debug msg="obtained new client token: AADU6EhWmkNF/cqAX8CFGrRqhMY9XbyljZRby8l+EXbtLHWLgT/g7tofJ1esFjqMlJwHQRoilpARgj/47w0mnI4DZr9IfskhaU/yDfg2Ryyx3AJwH9Jz8gGCpd+zL2BhQNbyLyqwjU9M3jGRmJ5yiguN25jOrLtw7q5w5EreIWEb1E3ib/cID06t9NFc2R9HNVYRJN8DM+oXfJRZJsTmxwvgCkumsRtChZIRj4j0Ivjze0xihmvxv/IK0+Qp" Aug 26 00:39:36 klipsch sudo[1657]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart shairport-sync Aug 26 00:39:36 klipsch sudo[1657]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:36 klipsch systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Aug 26 00:39:36 klipsch sudo[1655]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:36 klipsch systemd[1]: Stopping Shairport Sync - AirPlay Audio Receiver... Aug 26 00:39:36 klipsch systemd[1]: shairport-sync.service: Main process exited, code=killed, status=15/TERM Aug 26 00:39:36 klipsch systemd[1]: shairport-sync.service: Succeeded. Aug 26 00:39:36 klipsch systemd[1]: Stopped Shairport Sync - AirPlay Audio Receiver. Aug 26 00:39:36 klipsch sudo[1661]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart shairport-sync Aug 26 00:39:36 klipsch sudo[1661]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:36 klipsch systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Aug 26 00:39:36 klipsch sudo[1657]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:36 klipsch systemd[1]: Stopping Shairport Sync - AirPlay Audio Receiver... Aug 26 00:39:36 klipsch systemd[1]: shairport-sync.service: Main process exited, code=killed, status=15/TERM Aug 26 00:39:36 klipsch systemd[1]: shairport-sync.service: Succeeded. Aug 26 00:39:36 klipsch systemd[1]: Stopped Shairport Sync - AirPlay Audio Receiver. Aug 26 00:39:36 klipsch go-librespot[1633]: time="2024-08-26T00:39:36+02:00" level=debug msg="completed keyexchange" Aug 26 00:39:36 klipsch systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Aug 26 00:39:36 klipsch sudo[1661]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:36 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:36 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:36 klipsch volumio[1193]: info: Shairport-Sync Started Aug 26 00:39:36 klipsch volumio[1193]: Error adding Membership: Error: addMembership EINVAL Aug 26 00:39:36 klipsch volumio[1193]: info: Shairport-Sync Started Aug 26 00:39:36 klipsch volumio[1193]: info: Shairport-Sync Started Aug 26 00:39:36 klipsch volumio[1193]: SPOTIFY: ------------------------------------------------------ ACCESS TOKEN ------------------------------------------------------ Aug 26 00:39:36 klipsch volumio[1193]: SPOTIFY: BQAni5s6O7yZXB7CGshUHMi2MM9u5MaKL0E5p2-8q7MFO3iI_gP7SfehlDHxpIsUW-yAVyokAz4UEYjpRUEHLYifRrdX8-SxHUo88-x19bWazQD4DipbaKdLgFaePL7QZkftQxQPetz_70-GccsYPyy-a4_inH3lQCKUqd-dorFAreysMrzTyjviVhYrLHYIMqRAttDEMK-FXi0TEcuihBF_groT2bdlLxkmf0yYrj7G-KbEa72G0sM Aug 26 00:39:36 klipsch volumio[1193]: SPOTIFY: ------------------------------------------------------ ACCESS TOKEN ------------------------------------------------------ Aug 26 00:39:36 klipsch volumio[1193]: info: New Spotify access token = BQAni5s6O7yZXB7CGshUHMi2MM9u5MaKL0E5p2-8q7MFO3iI_gP7SfehlDHxpIsUW-yAVyokAz4UEYjpRUEHLYifRrdX8-SxHUo88-x19bWazQD4DipbaKdLgFaePL7QZkftQxQPetz_70-GccsYPyy-a4_inH3lQCKUqd-dorFAreysMrzTyjviVhYrLHYIMqRAttDEMK-FXi0TEcuihBF_groT2bdlLxkmf0yYrj7G-KbEa72G0sM Aug 26 00:39:36 klipsch volumio[1193]: info: Spotify credentials grant success - running version from March 24, 2019 Aug 26 00:39:36 klipsch volumio[1193]: SPOTIFY: User informations: {"display_name":"Cato Andrè Kvamme","external_urls":{"spotify":"https://open.spotify.com/user/buldrus"},"href":"https://api.spotify.com/v1/users/buldrus","id":"buldrus","images":[{"url":"https://scontent-ams2-1.xx.fbcdn.net/v/t1.6435-1/119183531_10164225849070080_3749862343771946805_n.jpg?stp=cp0_dst-jpg_s50x50&_nc_cat=107&ccb=1-7&_nc_sid=312bcd&_nc_ohc=QnI7KObgxv8Q7kNvgH1Do5d&_nc_ht=scontent-ams2-1.xx&edm=AP4hL3IEAAAA&oh=00_AYAcIadT8YV-6JyNoZ0ZEqX03UkNBV3uMJWJs1aX4Y7Sdg&oe=66F297AA","height":64,"width":64},{"url":"https://scontent-ams2-1.xx.fbcdn.net/v/t1.6435-1/119183531_10164225849070080_3749862343771946805_n.jpg?stp=dst-jpg_s320x320&_nc_cat=107&ccb=1-7&_nc_sid=05c18e&_nc_ohc=QnI7KObgxv8Q7kNvgH1Do5d&_nc_ht=scontent-ams2-1.xx&edm=AP4hL3IEAAAA&oh=00_AYChjhicE4oFIs1npuB61k57tVwr7A3ARgPxLPRnWk6luw&oe=66F297AA","height":300,"width":300}],"type":"user","uri":"spotify:user:buldrus","followers":{"href":null,"total":15},"country":"NO","product":"premium","explicit_content":{"filter_enabled":false,"filter_locked":false},"email":"buldrus@hotmail.com"} Aug 26 00:39:36 klipsch volumio[1193]: info: Spotify Successfully logged in Aug 26 00:39:37 klipsch volumio[1193]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Aug 26 00:39:37 klipsch volumio[1193]: info: [1724625577002] CoreMusicLibrary::Adding element Spotify Aug 26 00:39:37 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 26 00:39:37 klipsch volumio[1193]: Cannot find translation for source Spotify Aug 26 00:39:37 klipsch mpd[1617]: Aug 26 00:39 : decoder: Decoder plugin 'wildmidi' is unavailable: configuration file does not exist: /etc/timidity/timidity.cfg Aug 26 00:39:37 klipsch systemd[1]: Started Music Player Daemon. Aug 26 00:39:37 klipsch sudo[1569]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:37 klipsch sudo[1588]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:37 klipsch volumio[1193]: info: Completed starting Core Plugins Aug 26 00:39:37 klipsch volumio[1193]: info: ------------------------------------------- Aug 26 00:39:37 klipsch volumio[1193]: info: ----- MyVolumio plugins startup ---- Aug 26 00:39:37 klipsch volumio[1193]: info: ------------------------------------------- Aug 26 00:39:37 klipsch volumio[1193]: info: [MyVolumio PluginManager] Fetching plans data.... Aug 26 00:39:37 klipsch volumio[1193]: error: MPD error: The expression evaluated to a falsy value: Aug 26 00:39:37 klipsch volumio[1193]: assert.ok(self.idling) Aug 26 00:39:37 klipsch volumio[1193]: error: The expression evaluated to a falsy value: Aug 26 00:39:37 klipsch volumio[1193]: assert.ok(self.idling) Aug 26 00:39:37 klipsch volumio[1193]: info: MPD running with PID1617 Aug 26 00:39:37 klipsch volumio[1193]: ,establishing connection Aug 26 00:39:37 klipsch volumio[1193]: error: updateQueue error: null Aug 26 00:39:37 klipsch volumio[1193]: error: updateQueue error: null Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="completed challenge" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="authenticated as buldrus" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="authenticated as buldrus" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="dealer connection opened" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="initializing zeroconf session, username: buldrus" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="skipping packet PacketTypeSecretBlock, len: 336" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="skipping packet PacketTypeLicenseVersion, len: 2" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="skipping packet PacketTypeUnknown1f, len: 17" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="skipping packet PacketTypeLegacyWelcome, len: 0" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="skipping packet PacketTypeMercuryEvent, len: 513" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="autoplay enabled: false" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="received connection id: ZTQxMWNhMTUtZTlkOC00YTg0LWE2ZDgtMjk0YTJmMGI1YmQyK2RlYWxlcit0Y3A6Ly8wYWNhNTkwOS5pcC5nZXc0LnNwb3RpZnkubmV0OjU3MDArODE0OTY3OTdBQjlENDBGNjc0ODY2RUU5MDNGRDExMzZDRTQwNEMzMDg2ODc3MjcwQjNDMUYzQUYxRUYwOEIyOA==" Aug 26 00:39:37 klipsch go-librespot[1633]: time="2024-08-26T00:39:37+02:00" level=debug msg="put connect state because NEW_DEVICE" Aug 26 00:39:38 klipsch volumio[1193]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/90.0.4430.212 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 6 Aug 26 00:39:39 klipsch volumio[1193]: info: go-librespot daemon successfully initialized Aug 26 00:39:40 klipsch volumio[1193]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/90.0.4430.212 Safari/537.36 Engine version: 3 Transport: polling Total Clients: 7 Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetVisibleSources Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:41 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Aug 26 00:39:41 klipsch volumio[1193]: info: Received Get System Info Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Aug 26 00:39:41 klipsch volumio[1193]: info: Discovery: Getting this device information Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:41 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:41 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:41 klipsch volumio[1193]: info: Listing playlists Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Aug 26 00:39:41 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:41 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:41 klipsch systemd[1]: systemd-fsckd.service: Succeeded. Aug 26 00:39:42 klipsch sudo[1851]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Aug 26 00:39:42 klipsch sudo[1851]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:42 klipsch sudo[1851]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:42 klipsch sudo[1854]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Aug 26 00:39:42 klipsch sudo[1854]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:42 klipsch sudo[1854]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:42 klipsch sudo[1857]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start upmpdcli.service Aug 26 00:39:42 klipsch sudo[1857]: pam_unix(sudo:session): session opened for user root by (uid=0) Aug 26 00:39:42 klipsch systemd[1]: Started UPnP Renderer front-end to MPD. Aug 26 00:39:42 klipsch sudo[1857]: pam_unix(sudo:session): session closed for user root Aug 26 00:39:42 klipsch volumio[1193]: info: Upmpdcli Daemon Started Aug 26 00:39:42 klipsch volumio[1193]: error: Failed LSINFO: Error: [50@0] {lsinfo} No such directory Aug 26 00:39:42 klipsch volumio[1859]: Generating RSA private key, 4096 bit long modulus (2 primes) Aug 26 00:39:42 klipsch volumio[1193]: info: Initializing connection to go-librespot Websocket Aug 26 00:39:42 klipsch go-librespot[1633]: time="2024-08-26T00:39:42+02:00" level=debug msg="new websocket client" Aug 26 00:39:42 klipsch volumio[1193]: info: Connection to go-librespot Websocket established Aug 26 00:39:42 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Aug 26 00:39:42 klipsch sh[763]: timed out Aug 26 00:39:42 klipsch dhcpcd[806]: timed out Aug 26 00:39:42 klipsch sh[763]: dhcpcd exited Aug 26 00:39:42 klipsch dhcpcd[806]: dhcpcd exited Aug 26 00:39:42 klipsch sh[763]: ifup: failed to bring up eth0 Aug 26 00:39:42 klipsch systemd[1]: ifup@eth0.service: Main process exited, code=exited, status=1/FAILURE Aug 26 00:39:42 klipsch systemd[1]: ifup@eth0.service: Failed with result 'exit-code'. Aug 26 00:39:43 klipsch systemd[1]: systemd-hostnamed.service: Succeeded. Aug 26 00:39:43 klipsch volumio[1193]: info: Received Get System Info Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Aug 26 00:39:43 klipsch volumio[1193]: info: Discovery: Getting this device information Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:43 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: wizard , getOnboardingWizard Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Aug 26 00:39:43 klipsch volumio[1193]: info: Received Get System Info Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Aug 26 00:39:43 klipsch volumio[1193]: info: Discovery: Getting this device information Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:43 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:43 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Aug 26 00:39:43 klipsch go-librespot[1633]: time="2024-08-26T00:39:43+02:00" level=debug msg="handling transfer player command from fc86c3e41fda369264cbbfeac99f3884447658ff" Aug 26 00:39:43 klipsch go-librespot[1633]: time="2024-08-26T00:39:43+02:00" level=debug msg="resolved context of track" uri="spotify:playlist:37i9dQZF1DWTQwRw56TKNc" Aug 26 00:39:43 klipsch go-librespot[1633]: time="2024-08-26T00:39:43+02:00" level=trace msg="fetched new page 0 with 100 items (list: 100)" uri="spotify:playlist:37i9dQZF1DWTQwRw56TKNc" Aug 26 00:39:43 klipsch go-librespot[1633]: time="2024-08-26T00:39:43+02:00" level=debug msg="loading track (paused: false, position: 17743ms)" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:43 klipsch go-librespot[1633]: time="2024-08-26T00:39:43+02:00" level=debug msg="put connect state because PLAYER_STATE_CHANGED" Aug 26 00:39:43 klipsch go-librespot[1633]: time="2024-08-26T00:39:43+02:00" level=trace msg="emitting websocket event: will_play" Aug 26 00:39:43 klipsch volumio[1193]: SPOTIFY: received: {"type":"will_play","data":{"uri":"spotify:track:6GWLNfRviT4S82inkxvXV8","play_origin":"playlist"}} Aug 26 00:39:43 klipsch go-librespot[1633]: time="2024-08-26T00:39:43+02:00" level=debug msg="skipping packet PacketTypeMercuryEvent, len: 241" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="selected format OGG_VORBIS_320 (8403562a7096779d4e8b166934a1a81f5e0e6aea)" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="requested aes key for file 8403562a7096779d4e8b166934a1a81f5e0e6aea, gid: 6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="skipping packet PacketTypeMercuryEvent, len: 2638" Aug 26 00:39:44 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_volumio , setMyVolumioToken Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="fetched first chunk of 15, total size is 7674624 bytes" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="skipping packet PacketTypeMercuryEvent, len: 1773" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="fetched chunk 1/14, size: 524288" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=trace msg="seek to 17743ms (diff: 231ms, samples: 782466, bytes: 683767)" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="alsa driver configured, rate = 44100 bps, period time = 5011 us, period size = 221 frames, buffer time = 500000 us, buffer size = 22050 frames, periods per buffer = 99 frames" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="created new output device" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=info msg="loaded track \"I Think It's Going to Rain Today\" (paused: false, position: 17743ms, duration: 200040ms, prefetched: false)" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="fetched chunk 2/14, size: 524288" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="put connect state because PLAYER_STATE_CHANGED" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=trace msg="scheduling prefetch in 152s" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=trace msg="emitting websocket event: metadata" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=trace msg="emitting websocket event: active" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="sending successful reply for dealer request" Aug 26 00:39:44 klipsch volumio[1193]: SPOTIFY: received: {"type":"metadata","data":{"uri":"spotify:track:6GWLNfRviT4S82inkxvXV8","name":"I Think It's Going to Rain Today","artist_names":["Nina Simone"],"album_name":"Nina Simone \u0026 Piano (Expanded Edition)","album_cover_url":"https://i.scdn.co/image/ab67616d00001e02cd379476056f5f84b9c25bf0","position":17743,"duration":200040,"release_date":"year:1969","track_number":3,"disc_number":1}} Aug 26 00:39:44 klipsch volumio[1193]: SPOTIFY: received: {"type":"active","data":null} Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="skipping dealer message" uri=social-connect/v2/broadcast_status_update Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="skipping dealer message" uri=social-connect/v2/session_update Aug 26 00:39:44 klipsch volumio[1193]: info: Aligning Spotify Volume to Volumio Volume Aug 26 00:39:44 klipsch volumio[1193]: info: CoreCommandRouter::volumioGetState Aug 26 00:39:44 klipsch volumio[1193]: info: CorePlayQueue::getTrack 0 Aug 26 00:39:44 klipsch volumio[1193]: info: Setting Spotify Volume from Volumio: 74 Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="fetched chunk 3/14, size: 524288" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="fetched chunk 4/14, size: 524288" uri="spotify:track:6GWLNfRviT4S82inkxvXV8" Aug 26 00:39:44 klipsch volumio[1193]: info: CoreCommandRouter::executeOnPlugin: my_volumio , setMyVolumioToken Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=debug msg="put connect state because PLAYER_STATE_CHANGED" Aug 26 00:39:44 klipsch go-librespot[1633]: time="2024-08-26T00:39:44+02:00" level=trace msg="emitting websocket event: playing" Aug 26 00:39:44 klipsch volumio[1193]: SPOTIFY: received: {"type":"playing","data":{"uri":"spotify:track:6GWLNfRviT4S82inkxvXV8","play_origin":"playlist"}} Aug 26 00:39:44 klipsch volumio[1193]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Aug 26 00:39:44 klipsch volumio[1193]: TypeError: Cannot read property 'service' of undefined Aug 26 00:39:44 klipsch volumio[1193]: at ControllerSpotify.identifyPlaybackMode (/data/plugins/music_service/spop/index.js:336:50) Aug 26 00:39:44 klipsch volumio[1193]: at ControllerSpotify.parseEventState (/data/plugins/music_service/spop/index.js:262:18) Aug 26 00:39:44 klipsch volumio[1193]: at WebSocket.message (/data/plugins/music_service/spop/index.js:189:14) Aug 26 00:39:44 klipsch volumio[1193]: at WebSocket.emit (events.js:400:28) Aug 26 00:39:44 klipsch volumio[1193]: at Receiver.receiverOnMessage (/data/plugins/music_service/spop/node_modules/ws/lib/websocket.js:1220:20) Aug 26 00:39:44 klipsch volumio[1193]: at Receiver.emit (events.js:400:28) Aug 26 00:39:44 klipsch volumio[1193]: at Receiver.dataMessage (/data/plugins/music_service/spop/node_modules/ws/lib/receiver.js:596:14) Aug 26 00:39:44 klipsch volumio[1193]: at Receiver.getData (/data/plugins/music_service/spop/node_modules/ws/lib/receiver.js:496:10) Aug 26 00:39:44 klipsch volumio[1193]: at Receiver.startLoop (/data/plugins/music_service/spop/node_modules/ws/lib/receiver.js:167:16) Aug 26 00:39:44 klipsch volumio[1193]: at Receiver._write (/data/plugins/music_service/spop/node_modules/ws/lib/receiver.js:94:10) Aug 26 00:39:44 klipsch volumio[1193]: at writeOrBuffer (internal/streams/writable.js:358:12) Aug 26 00:39:44 klipsch volumio[1193]: at Receiver.Writable.write (internal/streams/writable.js:303:10) Aug 26 00:39:44 klipsch volumio[1193]: at Socket.socketOnData (/data/plugins/music_service/spop/node_modules/ws/lib/websocket.js:1355:35) Aug 26 00:39:44 klipsch volumio[1193]: at Socket.emit (events.js:400:28) Aug 26 00:39:44 klipsch volumio[1193]: at addChunk (internal/streams/readable.js:293:12) Aug 26 00:39:44 klipsch volumio[1193]: at readableAddChunk (internal/streams/readable.js:267:9) Aug 26 00:39:44 klipsch volumio[1193]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Aug 26 00:39:44 klipsch sudo[1887]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/journalctl --since=2024-08-26 00:38 Aug 26 00:39:44 klipsch sudo[1887]: pam_unix(sudo:session): session opened for user root by (uid=0) PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" VOLUMIO_BUILD_VERSION="5fd3886148e72a9cecd88a772d1f6079fb64d11a" VOLUMIO_FE_VERSION="e7cae168f9927391640a091813b8a9656b6909b6" VOLUMIO_FE3_VERSION="df82a8f23c90a3617c15c55572c8aaea90d8b32a" VOLUMIO_BE_VERSION="8bb23b009e91ae4c7ecd678f193e7d3b281fca0c" VOLUMIO_ARCH="x64" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Mon 22 Jul 2024 07:48:50 PM CEST" VOLUMIO_VERSION="3.742" VOLUMIO_HARDWARE="x86_amd64" VOLUMIO_DEVICENAME="x86_64" VOLUMIO_HASH="1049be5fd382035818795b7f5c38e10d"