-- Logs begin at Wed 2024-05-01 18:40:15 +07, end at Wed 2024-05-01 18:40:53 +07. -- May 01 18:40:15 tang3 kernel: Booting Linux on physical CPU 0x0 May 01 18:40:15 tang3 kernel: Linux version 6.1.69-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1710 SMP Thu Dec 21 13:17:38 GMT 2023 May 01 18:40:15 tang3 kernel: CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d May 01 18:40:15 tang3 kernel: CPU: div instructions available: patching division code May 01 18:40:15 tang3 kernel: CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache May 01 18:40:15 tang3 kernel: OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.5 May 01 18:40:15 tang3 kernel: random: crng init done May 01 18:40:15 tang3 kernel: Memory policy: Data cache writealloc May 01 18:40:15 tang3 kernel: Reserved memory: created CMA memory pool at 0x000000002a000000, size 64 MiB May 01 18:40:15 tang3 kernel: OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool May 01 18:40:15 tang3 kernel: Zone ranges: May 01 18:40:15 tang3 kernel: DMA [mem 0x0000000000000000-0x000000002fffffff] May 01 18:40:15 tang3 kernel: Normal empty May 01 18:40:15 tang3 kernel: HighMem [mem 0x0000000030000000-0x00000000fbffffff] May 01 18:40:15 tang3 kernel: Movable zone start for each node May 01 18:40:15 tang3 kernel: Early memory node ranges May 01 18:40:15 tang3 kernel: node 0: [mem 0x0000000000000000-0x0000000037ffffff] May 01 18:40:15 tang3 kernel: node 0: [mem 0x0000000040000000-0x00000000fbffffff] May 01 18:40:15 tang3 kernel: Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] May 01 18:40:15 tang3 kernel: percpu: Embedded 17 pages/cpu s37012 r8192 d24428 u69632 May 01 18:40:15 tang3 kernel: pcpu-alloc: s37012 r8192 d24428 u69632 alloc=17*4096 May 01 18:40:15 tang3 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 May 01 18:40:15 tang3 kernel: Built 1 zonelists, mobility grouping on. Total pages: 997696 May 01 18:40:15 tang3 kernel: Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:51:99:8B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 splash plymouth.ignore-serial-consoles dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0xF dwc_otg.nak_holdoff=1 quiet console=ttyS0,115200 console=tty1 imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh rootwait bootdelay=5 elevator=noop logo.nologo vt.global_cursor_default=0 net.ifnames=0 snd-bcm2835.enable_compat_alsa= snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 loglevel=0 May 01 18:40:15 tang3 kernel: Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. May 01 18:40:15 tang3 kernel: Unknown kernel command line parameters "splash imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh bootdelay=5", will be passed to user space. May 01 18:40:15 tang3 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) May 01 18:40:15 tang3 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) May 01 18:40:15 tang3 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off May 01 18:40:15 tang3 kernel: software IO TLB: area num 4. May 01 18:40:15 tang3 kernel: software IO TLB: mapped [mem 0x0000000023c90000-0x0000000027c90000] (64MB) May 01 18:40:15 tang3 kernel: Memory: 3797388K/3997696K available (10240K kernel code, 1505K rwdata, 3388K rodata, 2048K init, 637K bss, 134772K reserved, 65536K cma-reserved, 3211264K highmem) May 01 18:40:15 tang3 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 May 01 18:40:15 tang3 kernel: ftrace: allocating 37226 entries in 110 pages May 01 18:40:15 tang3 kernel: ftrace: allocated 110 pages with 5 groups May 01 18:40:15 tang3 kernel: trace event string verifier disabled May 01 18:40:15 tang3 kernel: rcu: Hierarchical RCU implementation. May 01 18:40:15 tang3 kernel: Rude variant of Tasks RCU enabled. May 01 18:40:15 tang3 kernel: Tracing variant of Tasks RCU enabled. May 01 18:40:15 tang3 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. May 01 18:40:15 tang3 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 May 01 18:40:15 tang3 kernel: GIC: Using split EOI/Deactivate mode May 01 18:40:15 tang3 kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention. May 01 18:40:15 tang3 kernel: arch_timer: cp15 timer(s) running at 54.00MHz (phys). May 01 18:40:15 tang3 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns May 01 18:40:15 tang3 kernel: sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns May 01 18:40:15 tang3 kernel: Switching to timer-based delay loop, resolution 18ns May 01 18:40:15 tang3 kernel: Console: colour dummy device 80x30 May 01 18:40:15 tang3 kernel: printk: console [tty1] enabled May 01 18:40:15 tang3 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) May 01 18:40:15 tang3 kernel: CPU: Testing write buffer coherency: ok May 01 18:40:15 tang3 kernel: CPU0: Spectre BHB: enabling loop workaround for all CPUs May 01 18:40:15 tang3 kernel: pid_max: default: 32768 minimum: 301 May 01 18:40:15 tang3 kernel: LSM: Security Framework initializing May 01 18:40:15 tang3 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) May 01 18:40:15 tang3 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) May 01 18:40:15 tang3 kernel: cgroup: Disabling memory control group subsystem May 01 18:40:15 tang3 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 May 01 18:40:15 tang3 kernel: cblist_init_generic: Setting adjustable number of callback queues. May 01 18:40:15 tang3 kernel: cblist_init_generic: Setting shift to 2 and lim to 1. May 01 18:40:15 tang3 kernel: cblist_init_generic: Setting adjustable number of callback queues. May 01 18:40:15 tang3 kernel: cblist_init_generic: Setting shift to 2 and lim to 1. May 01 18:40:15 tang3 kernel: Setting up static identity map for 0x200000 - 0x20003c May 01 18:40:15 tang3 kernel: rcu: Hierarchical SRCU implementation. May 01 18:40:15 tang3 kernel: rcu: Max phase no-delay instances is 1000. May 01 18:40:15 tang3 kernel: smp: Bringing up secondary CPUs ... May 01 18:40:15 tang3 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 May 01 18:40:15 tang3 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 May 01 18:40:15 tang3 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 May 01 18:40:15 tang3 kernel: smp: Brought up 1 node, 4 CPUs May 01 18:40:15 tang3 kernel: SMP: Total of 4 processors activated (432.00 BogoMIPS). May 01 18:40:15 tang3 kernel: CPU: All CPU(s) started in HYP mode. May 01 18:40:15 tang3 kernel: CPU: Virtualization extensions available. May 01 18:40:15 tang3 kernel: devtmpfs: initialized May 01 18:40:15 tang3 kernel: VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 May 01 18:40:15 tang3 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns May 01 18:40:15 tang3 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear) May 01 18:40:15 tang3 kernel: pinctrl core: initialized pinctrl subsystem May 01 18:40:15 tang3 kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family May 01 18:40:15 tang3 kernel: DMA: preallocated 1024 KiB pool for atomic coherent allocations May 01 18:40:15 tang3 kernel: audit: initializing netlink subsys (disabled) May 01 18:40:15 tang3 kernel: audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 May 01 18:40:15 tang3 kernel: thermal_sys: Registered thermal governor 'step_wise' May 01 18:40:15 tang3 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. May 01 18:40:15 tang3 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes. May 01 18:40:15 tang3 kernel: Serial: AMBA PL011 UART driver May 01 18:40:15 tang3 kernel: bcm2835-mbox fe00b880.mailbox: mailbox enabled May 01 18:40:15 tang3 kernel: raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16, variant start May 01 18:40:15 tang3 kernel: raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7 May 01 18:40:15 tang3 kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. May 01 18:40:15 tang3 kernel: bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 May 01 18:40:15 tang3 kernel: SCSI subsystem initialized May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver usbfs May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver hub May 01 18:40:15 tang3 kernel: usbcore: registered new device driver usb May 01 18:40:15 tang3 kernel: usb_phy_generic phy: supply vcc not found, using dummy regulator May 01 18:40:15 tang3 kernel: pps_core: LinuxPPS API ver. 1 registered May 01 18:40:15 tang3 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti May 01 18:40:15 tang3 kernel: PTP clock support registered May 01 18:40:15 tang3 kernel: vgaarb: loaded May 01 18:40:15 tang3 kernel: clocksource: Switched to clocksource arch_sys_counter May 01 18:40:15 tang3 kernel: VFS: Disk quotas dquot_6.6.0 May 01 18:40:15 tang3 kernel: VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) May 01 18:40:15 tang3 kernel: FS-Cache: Loaded May 01 18:40:15 tang3 kernel: CacheFiles: Loaded May 01 18:40:15 tang3 kernel: NET: Registered PF_INET protocol family May 01 18:40:15 tang3 kernel: IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) May 01 18:40:15 tang3 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) May 01 18:40:15 tang3 kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) May 01 18:40:15 tang3 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) May 01 18:40:15 tang3 kernel: TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) May 01 18:40:15 tang3 kernel: TCP: Hash tables configured (established 8192 bind 8192) May 01 18:40:15 tang3 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear) May 01 18:40:15 tang3 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) May 01 18:40:15 tang3 kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family May 01 18:40:15 tang3 kernel: RPC: Registered named UNIX socket transport module. May 01 18:40:15 tang3 kernel: RPC: Registered udp transport module. May 01 18:40:15 tang3 kernel: RPC: Registered tcp transport module. May 01 18:40:15 tang3 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. May 01 18:40:15 tang3 kernel: PCI: CLS 0 bytes, default 64 May 01 18:40:15 tang3 kernel: Trying to unpack rootfs image as initramfs... May 01 18:40:15 tang3 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available May 01 18:40:15 tang3 kernel: Initialise system trusted keyrings May 01 18:40:15 tang3 kernel: workingset: timestamp_bits=14 max_order=20 bucket_order=6 May 01 18:40:15 tang3 kernel: zbud: loaded May 01 18:40:15 tang3 kernel: NFS: Registering the id_resolver key type May 01 18:40:15 tang3 kernel: Key type id_resolver registered May 01 18:40:15 tang3 kernel: Key type id_legacy registered May 01 18:40:15 tang3 kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering... May 01 18:40:15 tang3 kernel: nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... May 01 18:40:15 tang3 kernel: Key type asymmetric registered May 01 18:40:15 tang3 kernel: Asymmetric key parser 'x509' registered May 01 18:40:15 tang3 kernel: bounce: pool size: 64 pages May 01 18:40:15 tang3 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) May 01 18:40:15 tang3 kernel: io scheduler mq-deadline registered May 01 18:40:15 tang3 kernel: io scheduler kyber registered May 01 18:40:15 tang3 kernel: brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: May 01 18:40:15 tang3 kernel: brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] May 01 18:40:15 tang3 kernel: brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 May 01 18:40:15 tang3 kernel: brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000 May 01 18:40:15 tang3 kernel: brcm-pcie fd500000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE May 01 18:40:15 tang3 kernel: brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 May 01 18:40:15 tang3 kernel: pci_bus 0000:00: root bus resource [bus 00-ff] May 01 18:40:15 tang3 kernel: pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) May 01 18:40:15 tang3 kernel: pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 May 01 18:40:15 tang3 kernel: pci 0000:00:00.0: PME# supported from D0 D3hot May 01 18:40:15 tang3 kernel: PCI: bus0: Fast back to back transfers disabled May 01 18:40:15 tang3 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring May 01 18:40:15 tang3 kernel: pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator May 01 18:40:15 tang3 kernel: pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator May 01 18:40:15 tang3 kernel: pci_bus 0000:01: supply vpcie12v not found, using dummy regulator May 01 18:40:15 tang3 kernel: brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) May 01 18:40:15 tang3 kernel: pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 May 01 18:40:15 tang3 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] May 01 18:40:15 tang3 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot May 01 18:40:15 tang3 kernel: PCI: bus1: Fast back to back transfers disabled May 01 18:40:15 tang3 kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 May 01 18:40:15 tang3 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] May 01 18:40:15 tang3 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] May 01 18:40:15 tang3 kernel: pci 0000:00:00.0: PCI bridge to [bus 01] May 01 18:40:15 tang3 kernel: pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] May 01 18:40:15 tang3 kernel: pcieport 0000:00:00.0: enabling device (0000 -> 0002) May 01 18:40:15 tang3 kernel: pcieport 0000:00:00.0: PME: Signaling with IRQ 45 May 01 18:40:15 tang3 kernel: bcm2708_fb soc:fb: FB found 1 display(s) May 01 18:40:15 tang3 kernel: Console: switching to colour frame buffer device 80x30 May 01 18:40:15 tang3 kernel: bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480 May 01 18:40:15 tang3 kernel: iproc-rng200 fe104000.rng: hwrng registered May 01 18:40:15 tang3 kernel: vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) May 01 18:40:15 tang3 kernel: brd: module loaded May 01 18:40:15 tang3 kernel: loop: module loaded May 01 18:40:15 tang3 kernel: Loading iSCSI transport class v2.0-870. May 01 18:40:15 tang3 kernel: bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 May 01 18:40:15 tang3 kernel: Freeing initrd memory: 13628K May 01 18:40:15 tang3 kernel: unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus May 01 18:40:15 tang3 kernel: usbcore: registered new device driver r8152-cfgselector May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver r8152 May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver lan78xx May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver smsc95xx May 01 18:40:15 tang3 kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller May 01 18:40:15 tang3 kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 May 01 18:40:15 tang3 kernel: xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0b00040000000890 May 01 18:40:15 tang3 kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller May 01 18:40:15 tang3 kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 May 01 18:40:15 tang3 kernel: xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed May 01 18:40:15 tang3 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 May 01 18:40:15 tang3 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 01 18:40:15 tang3 kernel: usb usb1: Product: xHCI Host Controller May 01 18:40:15 tang3 kernel: usb usb1: Manufacturer: Linux 6.1.69-v7l+ xhci-hcd May 01 18:40:15 tang3 kernel: usb usb1: SerialNumber: 0000:01:00.0 May 01 18:40:15 tang3 kernel: hub 1-0:1.0: USB hub found May 01 18:40:15 tang3 kernel: hub 1-0:1.0: 1 port detected May 01 18:40:15 tang3 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 May 01 18:40:15 tang3 kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 01 18:40:15 tang3 kernel: usb usb2: Product: xHCI Host Controller May 01 18:40:15 tang3 kernel: usb usb2: Manufacturer: Linux 6.1.69-v7l+ xhci-hcd May 01 18:40:15 tang3 kernel: usb usb2: SerialNumber: 0000:01:00.0 May 01 18:40:15 tang3 kernel: hub 2-0:1.0: USB hub found May 01 18:40:15 tang3 kernel: hub 2-0:1.0: 4 ports detected May 01 18:40:15 tang3 kernel: dwc_otg: version 3.00a 10-AUG-2012 (platform bus) May 01 18:40:15 tang3 kernel: dwc_otg: FIQ enabled May 01 18:40:15 tang3 kernel: dwc_otg: NAK holdoff enabled May 01 18:40:15 tang3 kernel: dwc_otg: FIQ split-transaction FSM enabled May 01 18:40:15 tang3 kernel: Module dwc_common_port init May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver uas May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver usb-storage May 01 18:40:15 tang3 kernel: mousedev: PS/2 mouse device common for all mice May 01 18:40:15 tang3 kernel: sdhci: Secure Digital Host Controller Interface driver May 01 18:40:15 tang3 kernel: sdhci: Copyright(c) Pierre Ossman May 01 18:40:15 tang3 kernel: sdhci-pltfm: SDHCI platform and OF driver helper May 01 18:40:15 tang3 kernel: ledtrig-cpu: registered to indicate activity on CPUs May 01 18:40:15 tang3 kernel: hid: raw HID events driver (C) Jiri Kosina May 01 18:40:15 tang3 kernel: usbcore: registered new interface driver usbhid May 01 18:40:15 tang3 kernel: usbhid: USB HID core driver May 01 18:40:15 tang3 kernel: Initializing XFRM netlink socket May 01 18:40:15 tang3 kernel: NET: Registered PF_PACKET protocol family May 01 18:40:15 tang3 kernel: Key type dns_resolver registered May 01 18:40:15 tang3 kernel: Registering SWP/SWPB emulation handler May 01 18:40:15 tang3 kernel: registered taskstats version 1 May 01 18:40:15 tang3 kernel: Loading compiled-in X.509 certificates May 01 18:40:15 tang3 kernel: Key type .fscrypt registered May 01 18:40:15 tang3 kernel: Key type fscrypt-provisioning registered May 01 18:40:15 tang3 kernel: uart-pl011 fe201000.serial: there is not valid maps for state default May 01 18:40:15 tang3 kernel: uart-pl011 fe201000.serial: cts_event_workaround enabled May 01 18:40:15 tang3 kernel: fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 51, base_baud = 0) is a PL011 rev2 May 01 18:40:15 tang3 kernel: serial serial0: tty port ttyAMA1 registered May 01 18:40:15 tang3 kernel: bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer May 01 18:40:15 tang3 kernel: bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver May 01 18:40:15 tang3 kernel: mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 May 01 18:40:15 tang3 kernel: mmc-bcm2835 fe300000.mmcnr: DMA channel allocated May 01 18:40:15 tang3 kernel: of_cfs_init May 01 18:40:15 tang3 kernel: of_cfs_init: OK May 01 18:40:15 tang3 kernel: mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA May 01 18:40:15 tang3 kernel: Freeing unused kernel image (initmem) memory: 2048K May 01 18:40:15 tang3 kernel: Run /init as init process May 01 18:40:15 tang3 kernel: with arguments: May 01 18:40:15 tang3 kernel: /init May 01 18:40:15 tang3 kernel: splash May 01 18:40:15 tang3 kernel: with environment: May 01 18:40:15 tang3 kernel: HOME=/ May 01 18:40:15 tang3 kernel: TERM=linux May 01 18:40:15 tang3 kernel: imgpart=/dev/mmcblk0p2 May 01 18:40:15 tang3 kernel: imgfile=/volumio_current.sqsh May 01 18:40:15 tang3 kernel: bootdelay=5 May 01 18:40:15 tang3 kernel: mmc1: new high speed SDIO card at address 0001 May 01 18:40:15 tang3 kernel: mmc0: new ultra high speed DDR50 SDXC card at address aaaa May 01 18:40:15 tang3 kernel: mmcblk0: mmc0:aaaa SC64G 59.5 GiB May 01 18:40:15 tang3 kernel: mmcblk0: p1 p2 p3 May 01 18:40:15 tang3 kernel: mmcblk0: mmc0:aaaa SC64G 59.5 GiB (quirks 0x00004000) May 01 18:40:15 tang3 kernel: usb 1-1: new high-speed USB device number 2 using xhci_hcd May 01 18:40:15 tang3 initramfs: Booting Volumio for BCM2711 May 01 18:40:15 tang3 initramfs: This script mounts rootfs RO with an overlay RW layer. May 01 18:40:15 tang3 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher May 01 18:40:15 tang3 initramfs: IMGPART=/dev/mmcblk0p2 May 01 18:40:15 tang3 initramfs: IMGFILE=/volumio_current.sqsh May 01 18:40:15 tang3 initramfs: Boot delay (except first time) will be 5 seconds May 01 18:40:15 tang3 initramfs: /dev/mmcblk0p2 not detected,retrying mdev in 5 seconds May 01 18:40:15 tang3 kernel: usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 May 01 18:40:15 tang3 kernel: usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 May 01 18:40:15 tang3 kernel: usb 1-1: Product: USB2.0 Hub May 01 18:40:15 tang3 kernel: hub 1-1:1.0: USB hub found May 01 18:40:15 tang3 kernel: hub 1-1:1.0: 4 ports detected May 01 18:40:15 tang3 kernel: usb 1-1.4: new high-speed USB device number 3 using xhci_hcd May 01 18:40:15 tang3 kernel: usb 1-1.4: New USB device found, idVendor=0781, idProduct=55b1, bcdDevice= 1.10 May 01 18:40:15 tang3 kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 May 01 18:40:15 tang3 kernel: usb 1-1.4: Product: SanDisk 3.2 Gen1 May 01 18:40:15 tang3 kernel: usb 1-1.4: Manufacturer: SanDisk May 01 18:40:15 tang3 kernel: usb 1-1.4: SerialNumber: A20038B12C4C4113 May 01 18:40:15 tang3 kernel: usb-storage 1-1.4:1.0: USB Mass Storage device detected May 01 18:40:15 tang3 kernel: scsi host0: usb-storage 1-1.4:1.0 May 01 18:40:15 tang3 initramfs: /dev/mmcblk0p2: May 01 18:40:15 tang3 kernel: EXT4-fs (mmcblk0p2): recovery complete May 01 18:40:15 tang3 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. May 01 18:40:15 tang3 initramfs: Doing a 5 second delay here to give kernel load a headstart May 01 18:40:15 tang3 kernel: scsi 0:0:0:0: Direct-Access SanDisk SanDisk 3.2 Gen1 DL17 PQ: 0 ANSI: 6 May 01 18:40:15 tang3 kernel: sd 0:0:0:0: [sda] 244457472 512-byte logical blocks: (125 GB/117 GiB) May 01 18:40:15 tang3 kernel: sd 0:0:0:0: [sda] Write Protect is off May 01 18:40:15 tang3 kernel: sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 May 01 18:40:15 tang3 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA May 01 18:40:15 tang3 kernel: sda: sda1 May 01 18:40:15 tang3 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 01 18:40:15 tang3 initramfs: Checking for USB updates May 01 18:40:15 tang3 kernel: F2FS-fs (sda1): Magic Mismatch, valid(0xf2f52010) - read(0x41b05066) May 01 18:40:15 tang3 kernel: F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock May 01 18:40:15 tang3 kernel: F2FS-fs (sda1): Magic Mismatch, valid(0xf2f52010) - read(0x0) May 01 18:40:15 tang3 kernel: F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock May 01 18:40:15 tang3 kernel: loop0: detected capacity change from 0 to 967536 May 01 18:40:15 tang3 kernel: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. May 01 18:40:15 tang3 kernel: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. May 01 18:40:15 tang3 kernel: EXT4-fs (mmcblk0p3): recovery complete May 01 18:40:15 tang3 kernel: EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. May 01 18:40:15 tang3 initramfs: With Option: May 01 18:40:15 tang3 initramfs: VOLUMIO_VERSION="3.631" May 01 18:40:15 tang3 initramfs: Finish initramfs, continue booting Volumio May 01 18:40:15 tang3 systemd[1]: System time before build time, advancing clock. May 01 18:40:15 tang3 kernel: NET: Registered PF_INET6 protocol family May 01 18:40:15 tang3 kernel: Segment Routing with IPv6 May 01 18:40:15 tang3 kernel: In-situ OAM (IOAM) with IPv6 May 01 18:40:15 tang3 systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) May 01 18:40:15 tang3 systemd[1]: Detected architecture arm. May 01 18:40:15 tang3 systemd[1]: Set hostname to . May 01 18:40:15 tang3 systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly. May 01 18:40:15 tang3 systemd[1]: Created slice User and Session Slice. May 01 18:40:15 tang3 systemd[1]: Created slice system-getty.slice. May 01 18:40:15 tang3 systemd[1]: Listening on udev Control Socket. May 01 18:40:15 tang3 systemd[1]: Started Forward Password Requests to Wall Directory Watch. May 01 18:40:15 tang3 systemd[1]: Listening on Journal Audit Socket. May 01 18:40:15 tang3 systemd[1]: Listening on RPCbind Server Activation Socket. May 01 18:40:15 tang3 kernel: i2c_dev: i2c /dev entries driver May 01 18:40:15 tang3 systemd-journald[229]: Journal started May 01 18:40:15 tang3 systemd-journald[229]: Runtime journal (/run/log/journal/c1d531165394c79721acb5a765d65e88) is 3.7M, max 30.0M, 26.2M free. May 01 18:40:15 tang3 systemd-modules-load[225]: Inserted module 'i2c_dev' May 01 18:40:15 tang3 fake-hwclock[227]: Wed May 1 11:40:15 UTC 2024 May 01 18:40:15 tang3 systemd[1]: Started Create Static Device Nodes in /dev. May 01 18:40:15 tang3 systemd[1]: Starting udev Kernel Device Manager... May 01 18:40:15 tang3 systemd[1]: Reached target Local File Systems (Pre). May 01 18:40:15 tang3 systemd[1]: Mounting /var/spool/cups... May 01 18:40:15 tang3 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. May 01 18:40:15 tang3 systemd[1]: Mounting /var/log... May 01 18:40:15 tang3 systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. May 01 18:40:15 tang3 systemd[1]: Mounting /tmp... May 01 18:40:15 tang3 systemd[1]: Mounted /var/spool/cups. May 01 18:40:15 tang3 systemd[1]: Mounting /var/spool/cups/tmp... May 01 18:40:15 tang3 systemd-udevd[246]: Network interface NamePolicy= disabled on kernel command line, ignoring. May 01 18:40:15 tang3 systemd[1]: Mounted /var/log. May 01 18:40:15 tang3 systemd[1]: Mounted /tmp. May 01 18:40:15 tang3 systemd[1]: Mounted /var/spool/cups/tmp. May 01 18:40:15 tang3 systemd[1]: Starting Flush Journal to Persistent Storage... May 01 18:40:15 tang3 systemd[1]: Started udev Kernel Device Manager. May 01 18:40:15 tang3 systemd-journald[229]: Runtime journal (/run/log/journal/c1d531165394c79721acb5a765d65e88) is 3.7M, max 30.0M, 26.2M free. May 01 18:40:15 tang3 systemd[1]: Started udev Coldplug all Devices. May 01 18:40:15 tang3 systemd[1]: Started Flush Journal to Persistent Storage. May 01 18:40:15 tang3 systemd[1]: Starting Show Plymouth Boot Screen... May 01 18:40:15 tang3 systemd[1]: Starting Helper to synchronize boot up for ifupdown... May 01 18:40:15 tang3 systemd[1]: Received SIGRTMIN+20 from PID 280 (plymouthd). May 01 18:40:15 tang3 systemd[1]: Started Helper to synchronize boot up for ifupdown. May 01 18:40:15 tang3 systemd[1]: Started Show Plymouth Boot Screen. May 01 18:40:15 tang3 systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. May 01 18:40:15 tang3 systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. May 01 18:40:15 tang3 systemd[1]: Reached target Local Encrypted Volumes. May 01 18:40:15 tang3 systemd[1]: Reached target Paths. May 01 18:40:15 tang3 systemd-udevd[266]: Using default interface naming scheme 'v240'. May 01 18:40:15 tang3 systemd-udevd[266]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. May 01 18:40:15 tang3 kernel: vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:15 tang3 kernel: bcm2835_vc_sm_cma_probe: Videocore shared memory driver May 01 18:40:15 tang3 kernel: [vc_sm_connected_init]: start May 01 18:40:15 tang3 kernel: [vc_sm_connected_init]: installed successfully May 01 18:40:15 tang3 kernel: rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000 May 01 18:40:15 tang3 kernel: rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem May 01 18:40:15 tang3 kernel: mc: Linux media interface: v0.10 May 01 18:40:16 tang3 kernel: videodev: Linux video capture interface: v2.00 May 01 18:40:16 tang3 kernel: rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:16 tang3 kernel: bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:16 tang3 kernel: rpivid feb10000.codec: Device registered as /dev/video19 May 01 18:40:16 tang3 kernel: bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:16 tang3 kernel: bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:16 tang3 kernel: bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:16 tang3 kernel: bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:16 tang3 kernel: bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 May 01 18:40:16 tang3 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 May 01 18:40:16 tang3 kernel: Bluetooth: Core ver 2.22 May 01 18:40:16 tang3 kernel: NET: Registered PF_BLUETOOTH protocol family May 01 18:40:16 tang3 kernel: Bluetooth: HCI device and connection manager initialized May 01 18:40:16 tang3 kernel: Bluetooth: HCI socket layer initialized May 01 18:40:16 tang3 kernel: Bluetooth: L2CAP socket layer initialized May 01 18:40:16 tang3 kernel: Bluetooth: SCO socket layer initialized May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register output node 0 with media controller May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register capture node 1 with media controller May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register capture node 2 with media controller May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register capture node 3 with media controller May 01 18:40:16 tang3 kernel: cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' May 01 18:40:16 tang3 kernel: cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' May 01 18:40:16 tang3 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' May 01 18:40:16 tang3 systemd-udevd[309]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video10 May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 decode May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video11 May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 encode May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video12 May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 isp May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 May 01 18:40:16 tang3 kernel: Bluetooth: HCI UART driver ver 2.3 May 01 18:40:16 tang3 kernel: Bluetooth: HCI UART protocol H4 registered May 01 18:40:16 tang3 kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered May 01 18:40:16 tang3 kernel: hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator May 01 18:40:16 tang3 kernel: hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator May 01 18:40:16 tang3 kernel: Bluetooth: HCI UART protocol Broadcom registered May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register output node 0 with media controller May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register capture node 1 with media controller May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register capture node 2 with media controller May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Register capture node 3 with media controller May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video18 May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx May 01 18:40:16 tang3 kernel: bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video31 May 01 18:40:16 tang3 kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image May 01 18:40:16 tang3 kernel: uart-pl011 fe201000.serial: no DMA platform data May 01 18:40:16 tang3 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 01 18:40:17 tang3 kernel: snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. May 01 18:40:17 tang3 kernel: snd_bcm2835: unknown parameter 'enable_compat_alsa' ignored May 01 18:40:17 tang3 kernel: brcmfmac: F1 signature read @0x18000000=0x15264345 May 01 18:40:17 tang3 systemd[1]: Found device /dev/mmcblk0p1. May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM: chip id 107 May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM: features 0x2f May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM4345C0 May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 May 01 18:40:17 tang3 kernel: bcm2835_audio bcm2835_audio: card created with 4 channels May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch May 01 18:40:17 tang3 kernel: bcm2835_audio bcm2835_audio: card created with 4 channels May 01 18:40:17 tang3 kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 May 01 18:40:17 tang3 kernel: usbcore: registered new interface driver brcmfmac May 01 18:40:17 tang3 kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 May 01 18:40:17 tang3 systemd-udevd[264]: Using default interface naming scheme 'v240'. May 01 18:40:17 tang3 systemd-udevd[264]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM: features 0x2f May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ May 01 18:40:17 tang3 kernel: Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 May 01 18:40:18 tang3 systemd[1]: Condition check resulted in /sys/subsystem/net/devices/eth0 being skipped. May 01 18:40:18 tang3 systemd[1]: Condition check resulted in /sys/subsystem/net/devices/wlan0 being skipped. May 01 18:40:18 tang3 systemd[1]: Created slice system-bthelper.slice. May 01 18:40:18 tang3 systemd[1]: Condition check resulted in Huge Pages File System being skipped. May 01 18:40:18 tang3 systemd[1]: Condition check resulted in FUSE Control File System being skipped. May 01 18:40:18 tang3 systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. May 01 18:40:18 tang3 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. May 01 18:40:18 tang3 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. May 01 18:40:18 tang3 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. May 01 18:40:18 tang3 systemd[1]: Starting File System Check on /dev/mmcblk0p1... May 01 18:40:18 tang3 systemd[1]: Starting Load/Save RF Kill Switch Status... May 01 18:40:19 tang3 systemd[1]: Started File System Check Daemon to report status. May 01 18:40:19 tang3 systemd[1]: Started Load/Save RF Kill Switch Status. May 01 18:40:19 tang3 systemd-fsck[409]: fsck.fat 4.1 (2017-01-24) May 01 18:40:19 tang3 systemd-fsck[409]: 0x25: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt. May 01 18:40:19 tang3 systemd-fsck[409]: Automatically removing dirty bit. May 01 18:40:19 tang3 systemd-fsck[409]: Performing changes. May 01 18:40:19 tang3 systemd-fsck[409]: /dev/mmcblk0p1: 367 files, 33349/46774 clusters May 01 18:40:19 tang3 systemd[1]: Started File System Check on /dev/mmcblk0p1. May 01 18:40:19 tang3 systemd[1]: Mounting /boot... May 01 18:40:19 tang3 systemd[1]: Mounted /boot. May 01 18:40:19 tang3 systemd[1]: Reached target Local File Systems. May 01 18:40:19 tang3 systemd[1]: Starting Create Volatile Files and Directories... May 01 18:40:19 tang3 systemd[1]: Starting Preprocess NFS configuration... May 01 18:40:19 tang3 systemd[1]: Starting Raise network interfaces... May 01 18:40:19 tang3 systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... May 01 18:40:19 tang3 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. May 01 18:40:19 tang3 systemd[1]: Started ifup for eth0. May 01 18:40:19 tang3 systemd[1]: Started ifup for wlan0. May 01 18:40:19 tang3 systemd[1]: plymouth-read-write.service: Succeeded. May 01 18:40:19 tang3 systemd[1]: Started Tell Plymouth To Write Out Runtime Data. May 01 18:40:19 tang3 systemd[1]: Received SIGRTMIN+20 from PID 280 (plymouthd). May 01 18:40:19 tang3 systemd[1]: nfs-config.service: Succeeded. May 01 18:40:19 tang3 systemd[1]: Started Preprocess NFS configuration. May 01 18:40:19 tang3 systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. May 01 18:40:19 tang3 systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped. May 01 18:40:19 tang3 systemd[1]: Reached target NFS client services. May 01 18:40:19 tang3 systemd[1]: Started Create Volatile Files and Directories. May 01 18:40:19 tang3 systemd[1]: Condition check resulted in Network Time Synchronization being skipped. May 01 18:40:19 tang3 systemd[1]: Starting RPC bind portmap service... May 01 18:40:19 tang3 systemd[1]: Starting Update UTMP about System Boot/Shutdown... May 01 18:40:19 tang3 systemd[1]: Started Entropy daemon using the HAVEGE algorithm. May 01 18:40:19 tang3 systemd[1]: Started Update UTMP about System Boot/Shutdown. May 01 18:40:19 tang3 systemd[1]: Reached target System Initialization. May 01 18:40:19 tang3 systemd[1]: Started Daily Cleanup of Temporary Directories. May 01 18:40:19 tang3 kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled May 01 18:40:19 tang3 systemd[1]: Listening on D-Bus System Message Bus Socket. May 01 18:40:19 tang3 systemd[1]: Listening on triggerhappy.socket. May 01 18:40:19 tang3 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket. May 01 18:40:19 tang3 systemd[1]: Reached target Sockets. May 01 18:40:19 tang3 systemd[1]: apt-daily.timer: Not using persistent file timestamp Wed 2024-05-01 19:28:48 +07 as it is in the future. May 01 18:40:19 tang3 systemd[1]: Started Daily apt download activities. May 01 18:40:19 tang3 systemd[1]: apt-daily-upgrade.timer: Not using persistent file timestamp Thu 2024-05-02 06:43:39 +07 as it is in the future. May 01 18:40:19 tang3 systemd[1]: Started Daily apt upgrade and clean activities. May 01 18:40:19 tang3 systemd[1]: Reached target Timers. May 01 18:40:19 tang3 kernel: 8021q: 802.1Q VLAN Support v1.8 May 01 18:40:19 tang3 systemd[1]: Started Volumio Splash. May 01 18:40:19 tang3 systemd[1]: Reached target Basic System. May 01 18:40:19 tang3 systemd[495]: volumiosplash.service: Failed to execute command: No such file or directory May 01 18:40:19 tang3 systemd[495]: volumiosplash.service: Failed at step EXEC spawning /bin/volumiosplash.sh: No such file or directory May 01 18:40:19 tang3 systemd[1]: Starting triggerhappy global hotkey daemon... May 01 18:40:19 tang3 systemd[1]: Starting Login Service... May 01 18:40:19 tang3 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped. May 01 18:40:19 tang3 systemd[1]: Started UPnP Renderer front-end to MPD. May 01 18:40:19 tang3 thd[501]: Unable to parse trigger line: May 01 18:40:19 tang3 thd[501]: Unable to parse trigger line: KEY_MIN_INTERESTING 1 /usr/local/bin/volumio volume toggle May 01 18:40:19 tang3 thd[501]: Unable to parse trigger line: May 01 18:40:19 tang3 thd[501]: Found socket passed from systemd May 01 18:40:19 tang3 systemd[1]: Started Volumio Iptables Module. May 01 18:40:19 tang3 systemd[1]: Condition check resulted in Copy user wpa_supplicant.conf being skipped. May 01 18:40:19 tang3 systemd[1]: Starting Configure Bluetooth Modems connected by UART... May 01 18:40:19 tang3 systemd[1]: Condition check resulted in Volumio SSH enabler being skipped. May 01 18:40:19 tang3 systemd[1]: Starting dhcpcd on all interfaces... May 01 18:40:19 tang3 systemd[1]: Started volumio-remote-updater.service. May 01 18:40:19 tang3 systemd[1]: Starting Avahi mDNS/DNS-SD Stack... May 01 18:40:19 tang3 systemd[1]: Starting Wireless Services... May 01 18:40:19 tang3 systemd[1]: Started Volumio Log Rotation Service. May 01 18:40:19 tang3 dhcpcd[515]: Not running dhcpcd because /etc/network/interfaces May 01 18:40:19 tang3 dhcpcd[515]: defines some interfaces that will use a May 01 18:40:19 tang3 dhcpcd[515]: DHCP client or static address May 01 18:40:19 tang3 systemd[1]: Started D-Bus System Message Bus. May 01 18:40:19 tang3 systemd[1]: Starting WPA supplicant... May 01 18:40:19 tang3 systemd[1]: Started Manage Sound Card State (restore and store). May 01 18:40:19 tang3 systemd[1]: Starting Save/Restore Sound Card State... May 01 18:40:19 tang3 systemd-logind[502]: New seat seat0. May 01 18:40:19 tang3 systemd[1]: Started triggerhappy global hotkey daemon. May 01 18:40:20 tang3 alsactl[532]: alsactl 1.1.8 daemon started May 01 18:40:20 tang3 systemd[1]: Started RPC bind portmap service. May 01 18:40:20 tang3 systemd[1]: volumiosplash.service: Main process exited, code=exited, status=203/EXEC May 01 18:40:20 tang3 systemd[1]: volumiosplash.service: Failed with result 'exit-code'. May 01 18:40:20 tang3 systemd[1]: hciuart.service: Succeeded. May 01 18:40:20 tang3 systemd[1]: Started Configure Bluetooth Modems connected by UART. May 01 18:40:20 tang3 systemd[1]: dhcpcd.service: Control process exited, code=exited, status=6/NOTCONFIGURED May 01 18:40:20 tang3 systemd[1]: dhcpcd.service: Failed with result 'exit-code'. May 01 18:40:20 tang3 systemd[1]: Failed to start dhcpcd on all interfaces. May 01 18:40:20 tang3 systemd[1]: Started Save/Restore Sound Card State. May 01 18:40:20 tang3 systemd[1]: Reached target Sound Card. May 01 18:40:20 tang3 sh[423]: wlan0=wlan0 May 01 18:40:20 tang3 systemd[1]: Starting Raspberry Pi bluetooth helper... May 01 18:40:20 tang3 systemd[1]: Reached target RPC Port Mapper. May 01 18:40:20 tang3 systemd[1]: Reached target Remote File Systems (Pre). May 01 18:40:20 tang3 systemd[1]: Reached target Remote File Systems. May 01 18:40:20 tang3 systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling... May 01 18:40:20 tang3 avahi-daemon[521]: Found user 'avahi' (UID 110) and group 'avahi' (GID 113). May 01 18:40:20 tang3 avahi-daemon[521]: Successfully dropped root privileges. May 01 18:40:20 tang3 avahi-daemon[521]: avahi-daemon 0.7 starting up. May 01 18:40:20 tang3 bthelper[549]: Raspberry Pi BDADDR already set May 01 18:40:20 tang3 sh[422]: eth0: waiting for carrier May 01 18:40:20 tang3 dhcpcd[465]: eth0: waiting for carrier May 01 18:40:20 tang3 kernel: bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) May 01 18:40:20 tang3 kernel: bcmgenet fd580000.ethernet eth0: Link is Down May 01 18:40:21 tang3 systemd[1]: Started Login Service. May 01 18:40:21 tang3 avahi-daemon[521]: Successfully called chroot(). May 01 18:40:21 tang3 avahi-daemon[521]: Successfully dropped remaining capabilities. May 01 18:40:21 tang3 wpa_supplicant[531]: Successfully initialized wpa_supplicant May 01 18:40:21 tang3 systemd[1]: Started Raspberry Pi bluetooth helper. May 01 18:40:21 tang3 avahi-daemon[521]: Loading service file /services/volumio.service. May 01 18:40:21 tang3 avahi-daemon[521]: Network interface enumeration completed. May 01 18:40:21 tang3 avahi-daemon[521]: Server startup complete. Host name is tang3.local. Local service cookie is 3251009732. May 01 18:40:21 tang3 avahi-daemon[521]: Service "Tang3" (/services/volumio.service) successfully established. May 01 18:40:21 tang3 volumio-remote-updater[516]: Error: No active session May 01 18:40:21 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:21] [info] asio async_connect error: system:111 (Connection refused) May 01 18:40:21 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:21] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) May 01 18:40:21 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:21] [error] handle_connect error: Underlying Transport Error May 01 18:40:21 tang3 systemd[1]: Started Raise network interfaces. May 01 18:40:21 tang3 systemd[1]: Started Avahi mDNS/DNS-SD Stack. May 01 18:40:21 tang3 systemd[1]: Started WPA supplicant. May 01 18:40:21 tang3 systemd[1]: Reached target Network. May 01 18:40:21 tang3 volumio[506]: Could not open config: /tmp/upmpdcli.conf May 01 18:40:21 tang3 systemd[1]: Starting Permit User Sessions... May 01 18:40:21 tang3 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped. May 01 18:40:21 tang3 systemd[1]: Starting Network Time Service... May 01 18:40:21 tang3 systemd[1]: Reached target Network is Online. May 01 18:40:21 tang3 systemd[1]: Starting LSB: Brings up/down network automatically... May 01 18:40:21 tang3 systemd[1]: Starting /etc/rc.local Compatibility... May 01 18:40:21 tang3 systemd[1]: Starting Samba NMB Daemon... May 01 18:40:21 tang3 systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. May 01 18:40:21 tang3 systemd[1]: Starting Bluetooth service... May 01 18:40:21 tang3 systemd[1]: upmpdcli.service: Main process exited, code=exited, status=1/FAILURE May 01 18:40:21 tang3 systemd[1]: upmpdcli.service: Failed with result 'exit-code'. May 01 18:40:21 tang3 systemd[1]: Started Permit User Sessions. May 01 18:40:21 tang3 systemd[1]: Started /etc/rc.local Compatibility. May 01 18:40:21 tang3 systemd[1]: Starting Terminate Plymouth Boot Screen... May 01 18:40:21 tang3 systemd[1]: Starting Hold until boot process finishes up... May 01 18:40:21 tang3 systemd[1]: Received SIGRTMIN+21 from PID 280 (plymouthd). May 01 18:40:21 tang3 systemd[1]: plymouth-quit.service: Succeeded. May 01 18:40:21 tang3 systemd[1]: Started Terminate Plymouth Boot Screen. May 01 18:40:21 tang3 systemd[1]: plymouth-start.service: Succeeded. May 01 18:40:21 tang3 systemd[1]: plymouth-quit-wait.service: Succeeded. May 01 18:40:21 tang3 systemd[1]: Started Hold until boot process finishes up. May 01 18:40:21 tang3 systemd[1]: Received SIGRTMIN+21 from PID 280 (n/a). May 01 18:40:21 tang3 loadcpufreq[558]: Loading cpufreq kernel modules...done (none). May 01 18:40:21 tang3 systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling. May 01 18:40:21 tang3 systemd[1]: iptables.service: Succeeded. May 01 18:40:21 tang3 ntpd[614]: ntpd 4.2.8p12@1.3728-o (1): Starting May 01 18:40:21 tang3 ntpd[614]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 103:103 May 01 18:40:21 tang3 ntpd[657]: proto: precision = 2.037 usec (-19) May 01 18:40:21 tang3 systemd[1]: Starting LSB: set CPUFreq kernel parameters... May 01 18:40:21 tang3 systemd[1]: Started Getty on tty1. May 01 18:40:21 tang3 systemd[1]: Reached target Login Prompts. May 01 18:40:21 tang3 systemd[1]: Started Network Time Service. May 01 18:40:21 tang3 ifplugd(eth0)[670]: ifplugd 0.28 initializing. May 01 18:40:21 tang3 ifplugd(eth0)[670]: Using interface eth0/D8:3A:DD:51:99:8B with driver (version: 6.1.69-v7l+) May 01 18:40:21 tang3 ifplugd(eth0)[670]: Using detection mode: SIOCETHTOOL May 01 18:40:21 tang3 ifplugd(eth0)[670]: Initialization complete, link beat not detected. May 01 18:40:21 tang3 ntpd[657]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature May 01 18:40:21 tang3 ntpd[657]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2024-06-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 May 01 18:40:21 tang3 bluetoothd[625]: Bluetooth daemon 5.50 May 01 18:40:21 tang3 bluetoothd[625]: Unknown key AutoConnectTimeout for group General in /etc/bluetooth/main.conf May 01 18:40:22 tang3 ntpd[657]: Listen and drop on 0 v6wildcard [::]:123 May 01 18:40:22 tang3 ntpd[657]: Listen and drop on 1 v4wildcard 0.0.0.0:123 May 01 18:40:22 tang3 ntpd[657]: Listen normally on 2 lo 127.0.0.1:123 May 01 18:40:22 tang3 ntpd[657]: Listening on routing socket on fd #19 for interface updates May 01 18:40:22 tang3 ntpd[657]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized May 01 18:40:22 tang3 ntpd[657]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized May 01 18:40:22 tang3 systemd[1]: Started Bluetooth service. May 01 18:40:22 tang3 bluetoothd[625]: Starting SDP server May 01 18:40:22 tang3 bluetoothd[625]: Excluding (cli) sap May 01 18:40:22 tang3 ifplugd[615]: Network Interface Plugging Daemon...start eth0...done. May 01 18:40:22 tang3 systemd[1]: Started LSB: Brings up/down network automatically. May 01 18:40:22 tang3 systemd[1]: Reached target Bluetooth. May 01 18:40:22 tang3 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3 May 01 18:40:22 tang3 kernel: Bluetooth: BNEP filters: protocol multicast May 01 18:40:22 tang3 kernel: Bluetooth: BNEP socket layer initialized May 01 18:40:22 tang3 bluetoothd[625]: Bluetooth management interface 1.22 initialized May 01 18:40:22 tang3 kernel: Bluetooth: MGMT ver 1.22 May 01 18:40:22 tang3 dbus-daemon[528]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=625 comm="/usr/lib/bluetooth/bluetoothd --noplugin=sap ") May 01 18:40:22 tang3 cpufrequtils[656]: CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...CPU2...CPU3...done. May 01 18:40:22 tang3 bluetoothd[625]: Failed to set privacy: Rejected (0x0b) May 01 18:40:22 tang3 systemd[1]: Started LSB: set CPUFreq kernel parameters. May 01 18:40:22 tang3 systemd[1]: Starting Hostname Service... May 01 18:40:22 tang3 dbus-daemon[528]: [system] Successfully activated service 'org.freedesktop.hostname1' May 01 18:40:22 tang3 systemd[1]: Started Hostname Service. May 01 18:40:22 tang3 haveged[475]: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 8.2.0 CTV); collect: 128K May 01 18:40:22 tang3 haveged[475]: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14768/63488 May 01 18:40:22 tang3 haveged[475]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.00047 May 01 18:40:22 tang3 haveged[475]: haveged: fills: 0, generated: 0 May 01 18:40:22 tang3 nmbd[630]: [2024/05/01 18:40:22.635887, 0] ../source3/nmbd/asyncdns.c:158(start_async_dns) May 01 18:40:22 tang3 nmbd[630]: started asyncdns process 692 May 01 18:40:22 tang3 nmbd[630]: [2024/05/01 18:40:22.637833, 0] ../lib/util/become_daemon.c:149(daemon_status) May 01 18:40:22 tang3 nmbd[630]: daemon_status: STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ... May 01 18:40:22 tang3 nmbd[630]: [2024/05/01 18:40:22.637967, 0] ../source3/nmbd/nmbd_subnetdb.c:254(create_subnets) May 01 18:40:22 tang3 nmbd[630]: NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6). May 01 18:40:22 tang3 ntpd[657]: error resolving pool 0.debian.pool.ntp.org: System error (-11) May 01 18:40:22 tang3 wireless.js[523]: Cleaning previous... May 01 18:40:23 tang3 sudo[700]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 May 01 18:40:23 tang3 sudo[700]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:23 tang3 sudo[700]: pam_unix(sudo:session): session closed for user root May 01 18:40:23 tang3 sudo[702]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down May 01 18:40:23 tang3 sudo[702]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:23 tang3 sudo[702]: pam_unix(sudo:session): session closed for user root May 01 18:40:23 tang3 wireless.js[523]: Stopped aP May 01 18:40:23 tang3 sudo[709]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up May 01 18:40:23 tang3 sudo[709]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:23 tang3 sudo[709]: pam_unix(sudo:session): session closed for user root May 01 18:40:23 tang3 kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled May 01 18:40:23 tang3 sudo[711]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg get May 01 18:40:23 tang3 sudo[711]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:23 tang3 sudo[711]: pam_unix(sudo:session): session closed for user root May 01 18:40:23 tang3 sudo[718]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up May 01 18:40:23 tang3 sudo[718]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:23 tang3 sudo[718]: pam_unix(sudo:session): session closed for user root May 01 18:40:23 tang3 sudo[720]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw wlan0 scan May 01 18:40:23 tang3 sudo[720]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:23 tang3 ntpd[657]: error resolving pool 1.debian.pool.ntp.org: System error (-11) May 01 18:40:24 tang3 systemd[1]: systemd-rfkill.service: Succeeded. May 01 18:40:24 tang3 sh[422]: eth0: carrier acquired May 01 18:40:24 tang3 dhcpcd[465]: eth0: carrier acquired May 01 18:40:24 tang3 kernel: bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx May 01 18:40:24 tang3 sh[422]: DUID 00:01:00:01:2d:69:1c:cf:d8:3a:dd:51:99:8b May 01 18:40:24 tang3 sh[422]: eth0: IAID dd:51:99:8b May 01 18:40:24 tang3 dhcpcd[465]: DUID 00:01:00:01:2d:69:1c:cf:d8:3a:dd:51:99:8b May 01 18:40:24 tang3 dhcpcd[465]: eth0: IAID dd:51:99:8b May 01 18:40:24 tang3 sh[422]: eth0: adding address fe80::1697:90b9:3cdc:b223 May 01 18:40:24 tang3 sh[422]: ipv6_addaddr1: Permission denied May 01 18:40:24 tang3 dhcpcd[465]: eth0: adding address fe80::1697:90b9:3cdc:b223 May 01 18:40:24 tang3 dhcpcd[465]: ipv6_addaddr1: Permission denied May 01 18:40:24 tang3 ntpd[657]: error resolving pool 2.debian.pool.ntp.org: System error (-11) May 01 18:40:25 tang3 ifplugd(eth0)[670]: Link beat detected. May 01 18:40:25 tang3 ifplugd(eth0)[670]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. May 01 18:40:25 tang3 sh[422]: eth0: soliciting an IPv6 router May 01 18:40:25 tang3 dhcpcd[465]: eth0: soliciting an IPv6 router May 01 18:40:25 tang3 ifplugd(eth0)[670]: client: ifup: waiting for lock on /run/network/ifstate.eth0 May 01 18:40:25 tang3 sh[422]: eth0: rebinding lease of 192.168.100.50 May 01 18:40:25 tang3 dhcpcd[465]: eth0: rebinding lease of 192.168.100.50 May 01 18:40:25 tang3 bthelper[549]: Changing power off succeeded May 01 18:40:25 tang3 sh[422]: eth0: probing address 192.168.100.50/24 May 01 18:40:25 tang3 dhcpcd[465]: eth0: probing address 192.168.100.50/24 May 01 18:40:25 tang3 bthelper[549]: [CHG] Controller D8:3A:DD:51:99:8F Class: 0x0000041c May 01 18:40:25 tang3 bthelper[549]: Changing power on succeeded May 01 18:40:25 tang3 ntpd[657]: error resolving pool 3.debian.pool.ntp.org: System error (-11) May 01 18:40:26 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:26] [info] asio async_connect error: system:111 (Connection refused) May 01 18:40:26 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:26] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) May 01 18:40:26 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:26] [error] handle_connect error: Underlying Transport Error May 01 18:40:26 tang3 sudo[720]: pam_unix(sudo:session): session closed for user root May 01 18:40:26 tang3 wireless.js[523]: SETTING APPROPRIATE REG DOMAIN: DE May 01 18:40:26 tang3 sudo[738]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up May 01 18:40:26 tang3 sudo[738]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:26 tang3 sudo[738]: pam_unix(sudo:session): session closed for user root May 01 18:40:26 tang3 sudo[740]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg set DE May 01 18:40:26 tang3 sudo[740]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:26 tang3 sudo[740]: pam_unix(sudo:session): session closed for user root May 01 18:40:26 tang3 wireless.js[523]: SUCCESSFULLY SET NEW REGDOMAIN: DE May 01 18:40:26 tang3 wireless.js[523]: Start wireless flow May 01 18:40:26 tang3 wireless.js[523]: Stopped hotspot (if there).. May 01 18:40:26 tang3 sudo[745]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 May 01 18:40:26 tang3 sudo[745]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:26 tang3 sudo[745]: pam_unix(sudo:session): session closed for user root May 01 18:40:26 tang3 sudo[747]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down May 01 18:40:26 tang3 sudo[747]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:27 tang3 sudo[747]: pam_unix(sudo:session): session closed for user root May 01 18:40:27 tang3 wireless.js[523]: DHCP IP May 01 18:40:27 tang3 wireless.js[523]: Start ap May 01 18:40:27 tang3 wpa_supplicant[749]: Successfully initialized wpa_supplicant May 01 18:40:27 tang3 sudo[750]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/dhcpcd May 01 18:40:27 tang3 sudo[750]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:27 tang3 dhcpcd[751]: dev: loaded udev May 01 18:40:27 tang3 kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled May 01 18:40:27 tang3 dhcpcd-run-hooks[760]: wlan0: starting wpa_supplicant May 01 18:40:27 tang3 dhcpcd-run-hooks[765]: wlan0: failed to start wpa_supplicant May 01 18:40:27 tang3 dhcpcd-run-hooks[766]: wlan0: Successfully initialized wpa_supplicant nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Ma May 01 18:40:27 tang3 dhcpcd[751]: wlan0: connected to Access Point `' May 01 18:40:27 tang3 dhcpcd[751]: DUID 00:01:00:01:2d:69:1c:cf:d8:3a:dd:51:99:8b May 01 18:40:27 tang3 dhcpcd[751]: eth0: IAID dd:51:99:8b May 01 18:40:27 tang3 dhcpcd[751]: eth0: adding address fe80::1697:90b9:3cdc:b223 May 01 18:40:27 tang3 dhcpcd[751]: ipv6_addaddr1: Permission denied May 01 18:40:27 tang3 dhcpcd[751]: wlan0: waiting for carrier May 01 18:40:27 tang3 dhcpcd[751]: eth0: rebinding lease of 192.168.100.50 May 01 18:40:27 tang3 dhcpcd[751]: eth0: probing address 192.168.100.50/24 May 01 18:40:28 tang3 dhcpcd[751]: eth0: soliciting an IPv6 router May 01 18:40:28 tang3 wireless.js[523]: trying... May 01 18:40:28 tang3 sudo[777]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:28 tang3 sudo[777]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:28 tang3 sudo[777]: pam_unix(sudo:session): session closed for user root May 01 18:40:29 tang3 wireless.js[523]: trying... May 01 18:40:29 tang3 sudo[780]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:29 tang3 sudo[780]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:29 tang3 sudo[780]: pam_unix(sudo:session): session closed for user root May 01 18:40:29 tang3 sh[422]: eth0: leased 192.168.100.50 for 1800 seconds May 01 18:40:29 tang3 sh[422]: eth0: adding route to 192.168.100.0/24 May 01 18:40:29 tang3 sh[422]: eth0: adding default route via 192.168.100.1 May 01 18:40:29 tang3 dhcpcd[465]: eth0: leased 192.168.100.50 for 1800 seconds May 01 18:40:29 tang3 avahi-daemon[521]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.100.50. May 01 18:40:29 tang3 avahi-daemon[521]: New relevant interface eth0.IPv4 for mDNS. May 01 18:40:29 tang3 dhcpcd[465]: eth0: adding route to 192.168.100.0/24 May 01 18:40:29 tang3 avahi-daemon[521]: Registering new address record for 192.168.100.50 on eth0.IPv4. May 01 18:40:29 tang3 dhcpcd[465]: eth0: adding default route via 192.168.100.1 May 01 18:40:29 tang3 wpa_supplicant[764]: wlan0: Trying to associate with SSID 'EliteHouses' May 01 18:40:29 tang3 sh[422]: forked to background, child pid 803 May 01 18:40:29 tang3 dhcpcd[465]: forked to background, child pid 803 May 01 18:40:30 tang3 ifplugd(eth0)[670]: client: ifup: interface eth0 already configured May 01 18:40:30 tang3 sh[422]: eth0=eth0 May 01 18:40:30 tang3 wireless.js[523]: trying... May 01 18:40:30 tang3 sudo[830]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:30 tang3 sudo[830]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:30 tang3 sudo[830]: pam_unix(sudo:session): session closed for user root May 01 18:40:30 tang3 ifplugd(eth0)[670]: Program executed successfully. May 01 18:40:30 tang3 ntpd[657]: Listen normally on 3 eth0 192.168.100.50:123 May 01 18:40:30 tang3 ntpd[657]: new interface(s) found: waking up resolver May 01 18:40:31 tang3 wireless.js[523]: trying... May 01 18:40:31 tang3 sudo[833]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:31 tang3 sudo[833]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:31 tang3 sudo[833]: pam_unix(sudo:session): session closed for user root May 01 18:40:32 tang3 wireless.js[523]: trying... May 01 18:40:32 tang3 sudo[836]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:32 tang3 sudo[836]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:32 tang3 sudo[836]: pam_unix(sudo:session): session closed for user root May 01 18:40:32 tang3 dhcpcd[751]: wlan0: carrier acquired May 01 18:40:32 tang3 dhcpcd[751]: wlan0: connected to Access Point `EliteHouses' May 01 18:40:32 tang3 wpa_supplicant[764]: wlan0: Associated with 12:82:3d:85:dc:5d May 01 18:40:32 tang3 wpa_supplicant[764]: wlan0: CTRL-EVENT-CONNECTED - Connection to 12:82:3d:85:dc:5d completed [id=0 id_str=] May 01 18:40:32 tang3 wpa_supplicant[764]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 May 01 18:40:32 tang3 wpa_supplicant[764]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=VN May 01 18:40:32 tang3 kernel: ieee80211 phy0: brcmf_cfg80211_reg_notifier: Firmware rejected country setting May 01 18:40:32 tang3 dhcpcd[751]: wlan0: IAID dd:51:99:8d May 01 18:40:32 tang3 dhcpcd[751]: wlan0: adding address fe80::68f7:5608:1f51:4254 May 01 18:40:32 tang3 dhcpcd[751]: ipv6_addaddr1: Permission denied May 01 18:40:32 tang3 dhcpcd[751]: wlan0: carrier lost May 01 18:40:32 tang3 nmbd[630]: [2024/05/01 18:40:32.648257, 0] ../lib/util/become_daemon.c:138(daemon_ready) May 01 18:40:32 tang3 systemd[1]: Started Samba NMB Daemon. May 01 18:40:32 tang3 nmbd[630]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections May 01 18:40:32 tang3 dhcpcd[751]: wlan0: carrier acquired May 01 18:40:32 tang3 dhcpcd[751]: wlan0: IAID dd:51:99:8d May 01 18:40:32 tang3 nmbd[630]: [2024/05/01 18:40:32.665793, 0] ../source3/nmbd/nmbd_namequery.c:109(query_name_response) May 01 18:40:32 tang3 nmbd[630]: query_name_response: Multiple (2) responses received for a query on subnet 192.168.100.50 for name WORKGROUP<1d>. May 01 18:40:32 tang3 nmbd[630]: This response was from IP 192.168.100.109, reporting an IP address of 192.168.100.109. May 01 18:40:32 tang3 systemd[1]: Starting Samba Winbind Daemon... May 01 18:40:32 tang3 dhcpcd[751]: wlan0: rebinding lease of 192.168.100.42 May 01 18:40:32 tang3 dhcpcd[751]: wlan0: probing address 192.168.100.42/24 May 01 18:40:32 tang3 winbindd[858]: [2024/05/01 18:40:32.969745, 0] ../source3/winbindd/winbindd_cache.c:3160(initialize_winbindd_cache) May 01 18:40:32 tang3 winbindd[858]: initialize_winbindd_cache: clearing cache and re-creating with version number 2 May 01 18:40:32 tang3 winbindd[858]: [2024/05/01 18:40:32.988444, 0] ../lib/util/become_daemon.c:138(daemon_ready) May 01 18:40:32 tang3 winbindd[858]: daemon_ready: STATUS=daemon 'winbindd' finished starting up and ready to serve connections May 01 18:40:32 tang3 systemd[1]: Started Samba Winbind Daemon. May 01 18:40:33 tang3 systemd[1]: Starting Samba SMB Daemon... May 01 18:40:33 tang3 wireless.js[523]: trying... May 01 18:40:33 tang3 sudo[865]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:33 tang3 sudo[865]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:33 tang3 sudo[865]: pam_unix(sudo:session): session closed for user root May 01 18:40:33 tang3 dhcpcd[751]: wlan0: soliciting an IPv6 router May 01 18:40:33 tang3 smbd[863]: [2024/05/01 18:40:33.417697, 0] ../lib/util/become_daemon.c:138(daemon_ready) May 01 18:40:33 tang3 smbd[863]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections May 01 18:40:33 tang3 systemd[1]: Started Samba SMB Daemon. May 01 18:40:33 tang3 dhcpcd[751]: eth0: leased 192.168.100.50 for 1800 seconds May 01 18:40:33 tang3 dhcpcd[751]: eth0: adding route to 192.168.100.0/24 May 01 18:40:33 tang3 dhcpcd[751]: eth0: adding default route via 192.168.100.1 May 01 18:40:33 tang3 dhcpcd[751]: forked to background, child pid 895 May 01 18:40:33 tang3 sudo[750]: pam_unix(sudo:session): session closed for user root May 01 18:40:33 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:33] [info] asio async_connect error: system:111 (Connection refused) May 01 18:40:33 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:33] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) May 01 18:40:33 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:33] [error] handle_connect error: Underlying Transport Error May 01 18:40:34 tang3 wireless.js[523]: trying... May 01 18:40:34 tang3 sudo[897]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:34 tang3 sudo[897]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:34 tang3 sudo[897]: pam_unix(sudo:session): session closed for user root May 01 18:40:35 tang3 wireless.js[523]: trying... May 01 18:40:35 tang3 sudo[900]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:35 tang3 sudo[900]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:35 tang3 sudo[900]: pam_unix(sudo:session): session closed for user root May 01 18:40:36 tang3 wireless.js[523]: trying... May 01 18:40:36 tang3 sudo[903]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:36 tang3 sudo[903]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:36 tang3 sudo[903]: pam_unix(sudo:session): session closed for user root May 01 18:40:37 tang3 wireless.js[523]: trying... May 01 18:40:37 tang3 sudo[906]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:37 tang3 sudo[906]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:37 tang3 sudo[906]: pam_unix(sudo:session): session closed for user root May 01 18:40:38 tang3 wireless.js[523]: trying... May 01 18:40:38 tang3 sudo[909]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:38 tang3 sudo[909]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:38 tang3 sudo[909]: pam_unix(sudo:session): session closed for user root May 01 18:40:38 tang3 dhcpcd[895]: wlan0: leased 192.168.100.42 for 1800 seconds May 01 18:40:38 tang3 avahi-daemon[521]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.100.42. May 01 18:40:38 tang3 dhcpcd[895]: wlan0: adding route to 192.168.100.0/24 May 01 18:40:38 tang3 dhcpcd[895]: wlan0: adding default route via 192.168.100.1 May 01 18:40:38 tang3 avahi-daemon[521]: New relevant interface wlan0.IPv4 for mDNS. May 01 18:40:38 tang3 avahi-daemon[521]: Registering new address record for 192.168.100.42 on wlan0.IPv4. May 01 18:40:39 tang3 wireless.js[523]: trying... May 01 18:40:39 tang3 sudo[933]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r May 01 18:40:39 tang3 sudo[933]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:39 tang3 sudo[933]: pam_unix(sudo:session): session closed for user root May 01 18:40:39 tang3 wireless.js[523]: Connected to: ----EliteHouses May 01 18:40:39 tang3 wireless.js[523]: ---- May 01 18:40:39 tang3 sudo[936]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 May 01 18:40:39 tang3 sudo[936]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:39 tang3 sudo[936]: pam_unix(sudo:session): session closed for user root May 01 18:40:39 tang3 wireless.js[523]: ... joined AP, wlan0 IPv4 is 192.168.100.42, ipV6 is undefined May 01 18:40:39 tang3 wireless.js[523]: It's done! AP May 01 18:40:39 tang3 systemd[1]: Started Wireless Services. May 01 18:40:39 tang3 systemd[1]: Started Volumio Backend Module. May 01 18:40:39 tang3 kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled May 01 18:40:39 tang3 systemd[1]: Started Volumio Cpu Tweaker. May 01 18:40:39 tang3 systemd[1]: Reached target Multi-User System. May 01 18:40:39 tang3 systemd[1]: Reached target Graphical Interface. May 01 18:40:39 tang3 systemd[1]: Starting Update UTMP about System Runlevel Changes... May 01 18:40:39 tang3 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. May 01 18:40:39 tang3 systemd[1]: Started Update UTMP about System Runlevel Changes. May 01 18:40:39 tang3 systemd[1]: Startup finished in 10.003s (kernel) + 26.116s (userspace) = 36.119s. May 01 18:40:39 tang3 volumio-cpu-tweak[942]: Setting RT Priority for mpd May 01 18:40:39 tang3 volumio-cpu-tweak[942]: pid 35's current scheduling policy: SCHED_OTHER May 01 18:40:39 tang3 volumio-cpu-tweak[942]: pid 35's current scheduling priority: 0 May 01 18:40:39 tang3 volumio-cpu-tweak[942]: Setting MPD Affinity May 01 18:40:39 tang3 volumio-cpu-tweak[942]: pid 3's current affinity mask: f May 01 18:40:39 tang3 volumio-cpu-tweak[942]: /bin/volumio_cpu_tweak: line 27: warning: command substitution: ignored null byte in input May 01 18:40:39 tang3 volumio-cpu-tweak[942]: VOLUMIO CPU TWEAK: Setting CPU Governor: performance May 01 18:40:39 tang3 systemd[1]: volumio_cpu_tweak.service: Succeeded. May 01 18:40:39 tang3 ntpd[657]: Listen normally on 4 wlan0 192.168.100.42:123 May 01 18:40:39 tang3 ntpd[657]: new interface(s) found: waking up resolver May 01 18:40:41 tang3 volumio[941]: info: ------------------------------------------- May 01 18:40:41 tang3 volumio[941]: info: ----- Volumio3 ---- May 01 18:40:41 tang3 volumio[941]: info: ------------------------------------------- May 01 18:40:41 tang3 volumio[941]: info: ----- System startup ---- May 01 18:40:41 tang3 volumio[941]: info: ------------------------------------------- May 01 18:40:41 tang3 volumio[941]: info: MYVOLUMIO Environment detected May 01 18:40:41 tang3 volumio[941]: info: Plugin folders cleanup May 01 18:40:41 tang3 volumio[941]: info: Scanning into folder /volumio/app/plugins/ May 01 18:40:41 tang3 volumio[941]: info: Scanning category audio_interface May 01 18:40:41 tang3 volumio[941]: info: Scanning category miscellanea May 01 18:40:41 tang3 volumio[941]: info: Scanning category music_service May 01 18:40:41 tang3 volumio[941]: info: Scanning category plugins.json May 01 18:40:41 tang3 volumio[941]: info: Scanning category system_controller May 01 18:40:41 tang3 volumio[941]: info: Scanning category user_interface May 01 18:40:41 tang3 volumio[941]: info: Scanning into folder /data/plugins/ May 01 18:40:41 tang3 volumio[941]: info: Scanning category audio_interface May 01 18:40:41 tang3 volumio[941]: info: Scanning category music_service May 01 18:40:41 tang3 volumio[941]: info: Plugin folders cleanup completed May 01 18:40:41 tang3 volumio[941]: info: ------------------------------------------- May 01 18:40:41 tang3 volumio[941]: info: ----- Core plugins startup ---- May 01 18:40:41 tang3 volumio[941]: info: ------------------------------------------- May 01 18:40:41 tang3 volumio[941]: info: Loading plugins from folder /volumio/app/plugins/ May 01 18:40:41 tang3 volumio[941]: info: Adding plugin upnp to MyMusic Plugins May 01 18:40:41 tang3 volumio[941]: info: Adding plugin airplay_emulation to MyMusic Plugins May 01 18:40:41 tang3 volumio[941]: info: Adding plugin upnp_browser to MyMusic Plugins May 01 18:40:41 tang3 volumio[941]: info: Loading plugins from folder /data/plugins/ May 01 18:40:41 tang3 volumio[941]: info: Loading plugin "system"... May 01 18:40:42 tang3 volumio[941]: info: Loading plugin "appearance"... May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "network"... May 01 18:40:43 tang3 volumio[941]: info: Refreshing Cached IP Addresses May 01 18:40:43 tang3 sudo[973]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 May 01 18:40:43 tang3 sudo[973]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "services"... May 01 18:40:43 tang3 sudo[975]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 May 01 18:40:43 tang3 sudo[975]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:43 tang3 sudo[973]: pam_unix(sudo:session): session closed for user root May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "alsa_controller"... May 01 18:40:43 tang3 sudo[975]: pam_unix(sudo:session): session closed for user root May 01 18:40:43 tang3 sudo[978]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan May 01 18:40:43 tang3 sudo[978]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:43 tang3 volumio[941]: warn: Unable to locate the audio output device USB HIFI AUDIO. Please configure a valid output device. May 01 18:40:43 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "wizard"... May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "networkfs"... May 01 18:40:43 tang3 volumio[941]: info: Starting Udev Watcher for removable devices May 01 18:40:43 tang3 volumio[941]: info: Ignoring mount for partition: boot May 01 18:40:43 tang3 volumio[941]: info: Ignoring mount for partition: volumio May 01 18:40:43 tang3 volumio[941]: info: Ignoring mount for partition: volumio_data May 01 18:40:43 tang3 volumio[941]: info: Mounting Device LOCAL May 01 18:40:43 tang3 sudo[987]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mount /dev/sda1 /mnt/USB/LOCAL -o noatime May 01 18:40:43 tang3 sudo[987]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:43 tang3 mount.exfat[989]: volume was not unmounted cleanly May 01 18:40:43 tang3 kernel: fuse: init (API version 7.37) May 01 18:40:43 tang3 sudo[987]: pam_unix(sudo:session): session closed for user root May 01 18:40:43 tang3 volumio[941]: WARN: volume was not unmounted cleanly. May 01 18:40:43 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "volumio_command_line_client"... May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "upnp"... May 01 18:40:43 tang3 volumio[941]: info: [1714563643480] Starting Upmpd Daemon May 01 18:40:43 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "my_music"... May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "mpd"... May 01 18:40:43 tang3 systemd[1]: Mounting FUSE Control File System... May 01 18:40:43 tang3 systemd[1]: Mounted FUSE Control File System. May 01 18:40:43 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:43] [connect] Successful connection May 01 18:40:43 tang3 volumio[941]: info: Loading plugin "upnp_browser"... May 01 18:40:44 tang3 volumio[941]: info: Loading plugin "alarm-clock"... May 01 18:40:44 tang3 volumio[941]: info: Loading plugin "airplay_emulation"... May 01 18:40:44 tang3 volumio[941]: info: Starting Shairport Sync May 01 18:40:44 tang3 volumio[941]: info: Loading plugin "last_100"... May 01 18:40:44 tang3 volumio[941]: info: Loading plugin "webradio"... May 01 18:40:44 tang3 volumio[941]: info: Loading plugin "i2s_dacs"... May 01 18:40:44 tang3 volumio[941]: info: I2S DAC not set, start Auto-detection May 01 18:40:44 tang3 volumio[941]: info: Loading plugin "volumiodiscovery"... May 01 18:40:44 tang3 volumio[941]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. May 01 18:40:44 tang3 volumio[941]: *** WARNING *** Please fix your application to use the native API of Avahi! May 01 18:40:44 tang3 volumio[941]: *** WARNING *** For more information see May 01 18:40:44 tang3 node[941]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. May 01 18:40:44 tang3 volumio[941]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. May 01 18:40:44 tang3 volumio[941]: *** WARNING *** Please fix your application to use the native API of Avahi! May 01 18:40:44 tang3 volumio[941]: *** WARNING *** For more information see May 01 18:40:44 tang3 node[941]: *** WARNING *** Please fix your application to use the native API of Avahi! May 01 18:40:44 tang3 node[941]: *** WARNING *** For more information see May 01 18:40:44 tang3 node[941]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. May 01 18:40:44 tang3 node[941]: *** WARNING *** Please fix your application to use the native API of Avahi! May 01 18:40:44 tang3 node[941]: *** WARNING *** For more information see May 01 18:40:44 tang3 volumio[941]: info: Applying required configuration parameters for plugin volumiodiscovery May 01 18:40:44 tang3 volumio[941]: info: Discovery: Started advertising with name: Tang3 May 01 18:40:44 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback May 01 18:40:44 tang3 volumio[941]: info: Loading plugin "youtube2"... May 01 18:40:45 tang3 volumio[941]: info: Loading plugin "outputs"... May 01 18:40:45 tang3 volumio[941]: info: Loading plugin "albumart"... May 01 18:40:45 tang3 volumio[941]: info: Plugin example_plugin is not enabled May 01 18:40:45 tang3 volumio[941]: info: Loading plugin "inputs"... May 01 18:40:45 tang3 volumio[941]: info: Loading plugin "updater_comm"... May 01 18:40:45 tang3 volumio[941]: info: Plugin mpdemulation is not enabled May 01 18:40:45 tang3 volumio[941]: info: Loading plugin "rest_api"... May 01 18:40:45 tang3 volumio[941]: info: Loading plugin "websocket"... May 01 18:40:45 tang3 volumio[941]: info: Loading plugin "fusiondsp"... May 01 18:40:45 tang3 volumio[941]: Forking 3 albumart workers May 01 18:40:45 tang3 volumio[941]: info: Applying required configuration parameters for plugin fusiondsp May 01 18:40:46 tang3 volumio[941]: info: Loading i18n strings for locale vi May 01 18:40:46 tang3 volumio[941]: Updating browse sources language May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources May 01 18:40:46 tang3 volumio[941]: Starting albumart workers May 01 18:40:46 tang3 volumio[941]: Starting albumart workers May 01 18:40:46 tang3 volumio[941]: Starting albumart workers May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::initPlayerControls May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam May 01 18:40:46 tang3 volumio[941]: Express server listening on port 3000 May 01 18:40:46 tang3 volumio[941]: [Metrics] WebUI: 6s 31.24ms May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::resetVolumioState May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::getcurrentVolume May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioRetrievevolume May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam May 01 18:40:46 tang3 volumio-remote-updater[516]: [2024-05-01 18:40:46] [connect] WebSocket Connection 127.0.0.1:3000 v-2 "WebSocket++/0.8.2" /socket.io/?EIO=4&transport=websocket&t=1714563643 101 May 01 18:40:46 tang3 volumio[941]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: WebSocket++/0.8.2 Total Clients: 1 May 01 18:40:46 tang3 sudo[978]: pam_unix(sudo:session): session closed for user root May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::pushState May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioPushState May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::updateTrackBlock May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrackBlock May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioRetrievevolume May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion May 01 18:40:46 tang3 volumio[941]: info: Reloading queue from file May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::pushState May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioPushState May 01 18:40:46 tang3 volumio[941]: info: Setting Device type: Raspberry PI May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::setRepeat true single undefined May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::pushState May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioPushState May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::setRandom true May 01 18:40:46 tang3 volumio[941]: info: CoreStateMachine::pushState May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioPushState May 01 18:40:46 tang3 volumio[941]: info: Listing playlists May 01 18:40:46 tang3 volumio[941]: info: Listing playlists May 01 18:40:46 tang3 volumio[941]: info: Discovery: adding e5a8680c-9d63-4497-927d-ea99bd8ad0e5 May 01 18:40:46 tang3 volumio[941]: info: Discovery: Found device Tang3 May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:46 tang3 volumio[941]: info: Discovery: this is already registered, e5a8680c-9d63-4497-927d-ea99bd8ad0e5 May 01 18:40:46 tang3 volumio[941]: info: Discovery: Found device Tang3 May 01 18:40:46 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:46 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:47 tang3 sudo[1072]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 May 01 18:40:47 tang3 sudo[1072]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:47 tang3 sudo[1072]: pam_unix(sudo:session): session closed for user root May 01 18:40:47 tang3 sudo[1074]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 May 01 18:40:47 tang3 sudo[1074]: pam_unix(sudo:session): session opened for user root by (uid=0) May 01 18:40:47 tang3 sudo[1074]: pam_unix(sudo:session): session closed for user root May 01 18:40:47 tang3 volumio[941]: verbose: New Socket.io Connection to 192.168.100.50 from 192.168.100.24 UA: Mozilla/5.0 (Linux; Android 10; K) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/124.0.0.0 Mobile Safari/537.36 Total Clients: 2 May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: appearance , isLatestTOSAccepted May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::volumioGetVisibleSources May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::getUIConfigOnPlugin May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:47 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom May 01 18:40:47 tang3 volumio[941]: info: Received Get System Info May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice May 01 18:40:47 tang3 volumio[941]: info: Discovery: Getting this device information May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:47 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:47 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:47 tang3 volumio[941]: info: Listing playlists May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getAdvancedSettingsStatus May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: albumart , getConfigParam May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::volumioGetBrowseSources May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::volumioGetBrowseSources May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::volumioGetBrowseSources May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::getUIConfigOnPlugin May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getMyCollectionStats May 01 18:40:47 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: networkfs , listShares May 01 18:40:49 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus May 01 18:40:49 tang3 volumio[941]: info: Received Get System Info May 01 18:40:49 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo May 01 18:40:49 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice May 01 18:40:49 tang3 volumio[941]: info: Discovery: Getting this device information May 01 18:40:49 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:49 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:49 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses May 01 18:40:49 tang3 systemd[1]: systemd-fsckd.service: Succeeded. May 01 18:40:50 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: my_volumio , setMyVolumioToken May 01 18:40:50 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus May 01 18:40:50 tang3 volumio[941]: info: Received Get System Info May 01 18:40:50 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo May 01 18:40:50 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice May 01 18:40:50 tang3 volumio[941]: info: Discovery: Getting this device information May 01 18:40:50 tang3 volumio[941]: info: CoreCommandRouter::volumioGetState May 01 18:40:50 tang3 volumio[941]: info: CorePlayQueue::getTrack 0 May 01 18:40:50 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses May 01 18:40:51 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: my_volumio , setMyVolumioToken May 01 18:40:51 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , getMyCollectionStats May 01 18:40:52 tang3 systemd[1]: systemd-hostnamed.service: Succeeded. May 01 18:40:53 tang3 volumio[941]: info: CoreCommandRouter::executeOnPlugin: mpd , updateDb May 01 18:40:53 tang3 volumio[941]: verbose: ControllerMpd::sendMpdCommand update May 01 18:40:53 tang3 volumio[941]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| May 01 18:40:53 tang3 volumio[941]: TypeError: Cannot read property 'then' of undefined May 01 18:40:53 tang3 volumio[941]: at ControllerMpd.sendMpdCommand (/volumio/app/plugins/music_service/mpd/index.js:331:6) May 01 18:40:53 tang3 volumio[941]: at ControllerMpd.updateDb (/volumio/app/plugins/music_service/mpd/index.js:1898:15) May 01 18:40:53 tang3 volumio[941]: at CoreCommandRouter.executeOnPlugin (/volumio/app/index.js:1077:32) May 01 18:40:53 tang3 volumio[941]: at Socket. (/volumio/app/plugins/user_interface/websocket/index.js:1049:26) May 01 18:40:53 tang3 volumio[941]: at Socket.emit (events.js:315:20) May 01 18:40:53 tang3 volumio[941]: at /volumio/node_modules/socket.io/lib/socket.js:503:12 May 01 18:40:53 tang3 volumio[941]: at processTicksAndRejections (internal/process/task_queues.js:75:11) May 01 18:40:53 tang3 volumio[941]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| May 01 18:40:53 tang3 sudo[1088]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/journalctl --since=2024-05-01 18:39 May 01 18:40:53 tang3 sudo[1088]: pam_unix(sudo:session): session opened for user root by (uid=0) PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" VOLUMIO_BUILD_VERSION="7f9f1bf001add7a8b19a4516e3c74ef598b2730d" VOLUMIO_FE_VERSION="614d7b13ffdcb0cc5a6072e7d06f59d52e323e71" VOLUMIO_FE3_VERSION="570aaed971c1346d45d1172dc445b086b258c6d1" VOLUMIO_BE_VERSION="512433c3e91cdaed7ecd2808b21adeffc2137d7f" VOLUMIO_ARCH="arm" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Wed 21 Feb 2024 09:37:22 PM CET" VOLUMIO_VERSION="3.631" VOLUMIO_HARDWARE="pi" VOLUMIO_DEVICENAME="Raspberry Pi" VOLUMIO_HASH="fdd9dd1169c06c1ad0a30ddd24c91b6b"