Dez 11 15:03:00 volumio kernel: usb 1-1.4: reset full-speed USB device number 67 using dwc_otg Dez 11 15:03:00 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:00 volumio kernel: usb 1-1.2: new full-speed USB device number 69 using dwc_otg Dez 11 15:03:00 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:00 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:00 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:00 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:00 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:00 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:00 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0071/input/input225 Dez 11 15:03:00 volumio kernel: hid-multitouch 0003:0484:5750.0071: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:00 volumio kernel: usb 1-1.4: USB disconnect, device number 67 Dez 11 15:03:01 volumio kernel: usb 1-1.4: new full-speed USB device number 70 using dwc_otg Dez 11 15:03:01 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/all Dez 11 15:03:01 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:01 volumio kernel: usb 1-1.2: reset full-speed USB device number 69 using dwc_otg Dez 11 15:03:01 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:01 volumio kernel: usb 1-1.4: new full-speed USB device number 71 using dwc_otg Dez 11 15:03:02 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:02 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:02 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:02 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:02 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:02 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:02 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0072/input/input227 Dez 11 15:03:02 volumio kernel: hid-multitouch 0003:0484:5750.0072: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:02 volumio kernel: usb 1-1.2: USB disconnect, device number 69 Dez 11 15:03:02 volumio go-librespot[2395]: time="2025-12-11T15:03:02+01:00" level=debug msg="new websocket client" Dez 11 15:03:02 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:03:02 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:03:02 volumio kernel: usb 1-1.2: new full-speed USB device number 72 using dwc_otg Dez 11 15:03:02 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:02 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:02 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:02 volumio volumio[1300]: info: touch_display: X display number found: 0 Dez 11 15:03:02 volumio volumio[1300]: info: Bluetoothremote--- Checking for trusted devices to reconnect... Dez 11 15:03:02 volumio volumio[1300]: info: Bluetoothremote--- Device list cleared and placeholder written. Dez 11 15:03:02 volumio kernel: usb 1-1.4: reset full-speed USB device number 71 using dwc_otg Dez 11 15:03:02 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:03 volumio bluetoothd[874]: Path / reserved for Adv Monitor app :1.226 Dez 11 15:03:03 volumio kernel: usb 1-1.2: new full-speed USB device number 73 using dwc_otg Dez 11 15:03:03 volumio bluetoothd[874]: Adv Monitor app :1.226 disconnected from D-Bus Dez 11 15:03:03 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:03 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:03 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:03 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:03 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:03 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:03 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0073/input/input229 Dez 11 15:03:03 volumio kernel: hid-multitouch 0003:0484:5750.0073: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:03 volumio kernel: usb 1-1.4: USB disconnect, device number 71 Dez 11 15:03:03 volumio startx[2375]: xinit: giving up Dez 11 15:03:03 volumio startx[2375]: xinit: unable to connect to X server: Cannot assign requested address Dez 11 15:03:03 volumio startx[2375]: xinit: server error Dez 11 15:03:03 volumio systemd[1]: volumio-kiosk.service: Main process exited, code=exited, status=1/FAILURE Dez 11 15:03:03 volumio systemd[1]: volumio-kiosk.service: Failed with result 'exit-code'. Dez 11 15:03:03 volumio kernel: usb 1-1.4: new full-speed USB device number 74 using dwc_otg Dez 11 15:03:03 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:03 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:03 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:04 volumio kernel: usb 1-1.2: reset full-speed USB device number 73 using dwc_otg Dez 11 15:03:04 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:03:04 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:04 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:04 volumio kernel: usb 1-1.4: new full-speed USB device number 75 using dwc_otg Dez 11 15:03:04 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:04 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:04 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:04 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:04 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:04 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:04 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0074/input/input231 Dez 11 15:03:04 volumio kernel: hid-multitouch 0003:0484:5750.0074: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:04 volumio kernel: usb 1-1.2: USB disconnect, device number 73 Dez 11 15:03:04 volumio kernel: usb 1-1.2: new full-speed USB device number 76 using dwc_otg Dez 11 15:03:04 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:04 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:04 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:05 volumio kernel: usb 1-1.4: reset full-speed USB device number 75 using dwc_otg Dez 11 15:03:05 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 11 15:03:05 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:05 volumio kernel: usb 1-1.2: new full-speed USB device number 77 using dwc_otg Dez 11 15:03:05 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:05 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:05 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:05 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:05 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:05 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:05 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0075/input/input233 Dez 11 15:03:05 volumio kernel: hid-multitouch 0003:0484:5750.0075: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:05 volumio kernel: usb 1-1.4: USB disconnect, device number 75 Dez 11 15:03:06 volumio kernel: usb 1-1.4: new full-speed USB device number 78 using dwc_otg Dez 11 15:03:06 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:06 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:06 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:06 volumio kernel: usb 1-1.2: reset full-speed USB device number 77 using dwc_otg Dez 11 15:03:06 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:06 volumio volumio[1300]: info: Connection to go-librespot Websocket established Dez 11 15:03:06 volumio kernel: usb 1-1.4: new full-speed USB device number 79 using dwc_otg Dez 11 15:03:06 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:06 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:06 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:06 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:06 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:06 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:06 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0076/input/input235 Dez 11 15:03:06 volumio kernel: hid-multitouch 0003:0484:5750.0076: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:06 volumio kernel: usb 1-1.2: USB disconnect, device number 77 Dez 11 15:03:07 volumio kernel: usb 1-1.2: new full-speed USB device number 80 using dwc_otg Dez 11 15:03:07 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:07 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:07 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:07 volumio kernel: usb 1-1.4: reset full-speed USB device number 79 using dwc_otg Dez 11 15:03:07 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:07 volumio volumio[1300]: info: touch_display: X display number found: 0 Dez 11 15:03:07 volumio volumio[1300]: info: CoreCommandRouter::getUIConfigOnPlugin Dez 11 15:03:08 volumio kernel: usb 1-1.2: new full-speed USB device number 81 using dwc_otg Dez 11 15:03:08 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Dez 11 15:03:08 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:03:08 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Dez 11 15:03:08 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:08 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:08 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:08 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:08 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:08 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:08 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0077/input/input237 Dez 11 15:03:08 volumio kernel: hid-multitouch 0003:0484:5750.0077: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:08 volumio kernel: usb 1-1.4: USB disconnect, device number 79 Dez 11 15:03:08 volumio kernel: usb 1-1.4: new full-speed USB device number 82 using dwc_otg Dez 11 15:03:08 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:08 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:08 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:08 volumio kernel: usb 1-1.2: reset full-speed USB device number 81 using dwc_otg Dez 11 15:03:09 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:09 volumio kernel: usb 1-1.4: new full-speed USB device number 83 using dwc_otg Dez 11 15:03:09 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:03:09 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:09 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:09 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:09 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:09 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:09 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:09 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0078/input/input239 Dez 11 15:03:09 volumio kernel: hid-multitouch 0003:0484:5750.0078: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:09 volumio kernel: usb 1-1.2: USB disconnect, device number 81 Dez 11 15:03:09 volumio kernel: usb 1-1.2: new full-speed USB device number 84 using dwc_otg Dez 11 15:03:09 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:09 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:09 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:10 volumio kernel: usb 1-1.4: reset full-speed USB device number 83 using dwc_otg Dez 11 15:03:10 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:10 volumio kernel: usb 1-1.2: new full-speed USB device number 85 using dwc_otg Dez 11 15:03:10 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:10 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:10 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:10 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:10 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:10 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:10 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0079/input/input241 Dez 11 15:03:10 volumio kernel: hid-multitouch 0003:0484:5750.0079: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:10 volumio kernel: usb 1-1.4: USB disconnect, device number 83 Dez 11 15:03:11 volumio kernel: usb 1-1.4: new full-speed USB device number 86 using dwc_otg Dez 11 15:03:11 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:11 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:11 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:11 volumio volumio[1300]: info: Getting Spotify volume Dez 11 15:03:11 volumio kernel: usb 1-1.2: reset full-speed USB device number 85 using dwc_otg Dez 11 15:03:11 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:11 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:11 volumio kernel: usb 1-1.4: new full-speed USB device number 87 using dwc_otg Dez 11 15:03:12 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:12 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:12 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:12 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:12 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:12 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:12 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.007A/input/input243 Dez 11 15:03:12 volumio kernel: hid-multitouch 0003:0484:5750.007A: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:12 volumio kernel: usb 1-1.2: USB disconnect, device number 85 Dez 11 15:03:12 volumio volumio-remote-updater[688]: [2025-12-11 15:03:12] [connect] Successful connection Dez 11 15:03:12 volumio kernel: usb 1-1.2: new full-speed USB device number 88 using dwc_otg Dez 11 15:03:12 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:12 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:12 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:12 volumio kernel: usb 1-1.4: reset full-speed USB device number 87 using dwc_otg Dez 11 15:03:12 volumio kernel: usb 1-1.4: reset full-speed USB device number 87 using dwc_otg Dez 11 15:03:13 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:13 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:03:13 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:03:13 volumio kernel: usb 1-1.2: new full-speed USB device number 89 using dwc_otg Dez 11 15:03:13 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:03:13 volumio volumio[1300]: error: MyVolumio Plugin failed to start in a timely fashion Dez 11 15:03:13 volumio volumio[1300]: [Metrics] CommandRouter: 96s 928.91ms Dez 11 15:03:13 volumio volumio[1300]: info: CoreCommandRouter::volumiosetStartupVolume Dez 11 15:03:13 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Dez 11 15:03:13 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:03:13 volumio volumio[1300]: info: CoreCommandRouter::Close All Modals sent Dez 11 15:03:13 volumio volumio[1300]: info: CoreCommandRouter::Close All Modals sent Dez 11 15:03:13 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:13 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:13 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:13 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:13 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:13 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:13 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.007B/input/input245 Dez 11 15:03:13 volumio kernel: hid-multitouch 0003:0484:5750.007B: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:13 volumio kernel: usb 1-1.4: USB disconnect, device number 87 Dez 11 15:03:13 volumio kernel: usb 1-1.4: new full-speed USB device number 90 using dwc_otg Dez 11 15:03:13 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:13 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:13 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:14 volumio kernel: usb 1-1.2: reset full-speed USB device number 89 using dwc_otg Dez 11 15:03:14 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:03:14 volumio volumio[1300]: info: Spotify volume: 100 Dez 11 15:03:14 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:14 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:14 volumio kernel: usb 1-1.4: new full-speed USB device number 91 using dwc_otg Dez 11 15:03:14 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:14 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:14 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:14 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:14 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:14 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:14 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.007C/input/input247 Dez 11 15:03:14 volumio kernel: hid-multitouch 0003:0484:5750.007C: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:14 volumio kernel: usb 1-1.2: USB disconnect, device number 89 Dez 11 15:03:15 volumio kernel: usb 1-1.2: new full-speed USB device number 92 using dwc_otg Dez 11 15:03:15 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:15 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:15 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:15 volumio kernel: usb 1-1.4: reset full-speed USB device number 91 using dwc_otg Dez 11 15:03:15 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:15 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , checkAudioDeviceAvailable Dez 11 15:03:15 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Dez 11 15:03:15 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , versionChangeDetect Dez 11 15:03:15 volumio kernel: usb 1-1.2: new full-speed USB device number 93 using dwc_otg Dez 11 15:03:15 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:15 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:15 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:15 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:15 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:15 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:16 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.007D/input/input249 Dez 11 15:03:16 volumio kernel: hid-multitouch 0003:0484:5750.007D: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:16 volumio kernel: usb 1-1.4: USB disconnect, device number 91 Dez 11 15:03:16 volumio kernel: usb 1-1.4: new full-speed USB device number 94 using dwc_otg Dez 11 15:03:16 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:16 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:16 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:16 volumio kernel: usb 1-1.2: reset full-speed USB device number 93 using dwc_otg Dez 11 15:03:16 volumio volumio[1300]: info: Bluetoothremote--- Device found: Press scan to detect BT device - xx Dez 11 15:03:16 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin bluetooth to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin multiroom to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin metavolumio to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin manifestui to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin cd_controller to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin smart_inputs to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin hi_res_audio to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin tidal to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin qobuz to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin tidalconnect to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin qobuzconnect to plan premium Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin bluetooth to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin multiroom to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin metavolumio to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin manifestui to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin cd_controller to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin smart_inputs to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin hi_res_audio to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin tidal to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin qobuz to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin tidalconnect to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin qobuzconnect to plan superstar Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin bluetooth to plan virtuoso Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin manifestui to plan virtuoso Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin cd_controller to plan virtuoso Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin tidal to plan virtuoso Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin qobuz to plan virtuoso Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Adding plugin tidalconnect to plan virtuoso Dez 11 15:03:17 volumio kernel: usb 1-1.4: new full-speed USB device number 95 using dwc_otg Dez 11 15:03:17 volumio volumio[1300]: info: Adding plugin bluetooth to MyMusic Plugins Dez 11 15:03:17 volumio bluetoothd[874]: Path / reserved for Adv Monitor app :1.262 Dez 11 15:03:17 volumio volumio[1300]: info: Adding plugin multiroom to MyMusic Plugins Dez 11 15:03:17 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:17 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:17 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:17 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:17 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:17 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:17 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.007E/input/input251 Dez 11 15:03:17 volumio kernel: hid-multitouch 0003:0484:5750.007E: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:17 volumio kernel: usb 1-1.2: USB disconnect, device number 93 Dez 11 15:03:17 volumio bluetoothd[874]: Adv Monitor app :1.262 disconnected from D-Bus Dez 11 15:03:17 volumio volumio[1300]: info: Adding plugin metavolumio to MyMusic Plugins Dez 11 15:03:17 volumio volumio[1300]: info: Adding plugin cd_controller to MyMusic Plugins Dez 11 15:03:17 volumio volumio[1300]: info: Adding plugin qobuzconnect to MyMusic Plugins Dez 11 15:03:17 volumio volumio[1300]: info: Adding plugin smart_inputs to MyMusic Plugins Dez 11 15:03:17 volumio kernel: usb 1-1.2: new full-speed USB device number 96 using dwc_otg Dez 11 15:03:17 volumio volumio[1300]: info: Adding plugin tidalconnect to MyMusic Plugins Dez 11 15:03:17 volumio volumio[1300]: info: [MyVolumio PluginManager] Loading plugin "my_volumio"... Dez 11 15:03:17 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:17 volumio kernel: usb 1-1.2: string descriptor 0 read error: -32 Dez 11 15:03:17 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:17 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:17 volumio kernel: usb 1-1.2: can't set config #1, error -32 Dez 11 15:03:18 volumio kernel: usb 1-1.4: reset full-speed USB device number 95 using dwc_otg Dez 11 15:03:18 volumio kernel: usb 1-1.2: USB disconnect, device number 96 Dez 11 15:03:18 volumio kernel: usb 1-1.4: reset full-speed USB device number 95 using dwc_otg Dez 11 15:03:18 volumio kernel: usb 1-1.2: new full-speed USB device number 97 using dwc_otg Dez 11 15:03:18 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:18 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:18 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:18 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:18 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:18 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:18 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.007F/input/input253 Dez 11 15:03:18 volumio kernel: hid-multitouch 0003:0484:5750.007F: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:18 volumio kernel: usb 1-1.4: USB disconnect, device number 95 Dez 11 15:03:19 volumio kernel: usb 1-1.4: new full-speed USB device number 98 using dwc_otg Dez 11 15:03:19 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:19 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:19 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:19 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:03:19 volumio kernel: usb 1-1.2: reset full-speed USB device number 97 using dwc_otg Dez 11 15:03:19 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:20 volumio kernel: usb 1-1.4: new full-speed USB device number 99 using dwc_otg Dez 11 15:03:20 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:20 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:20 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:20 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:20 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:20 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:20 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0080/input/input255 Dez 11 15:03:20 volumio kernel: hid-multitouch 0003:0484:5750.0080: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:20 volumio kernel: usb 1-1.2: USB disconnect, device number 97 Dez 11 15:03:20 volumio kernel: usb 1-1.2: new full-speed USB device number 100 using dwc_otg Dez 11 15:03:20 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:20 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:20 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:20 volumio kernel: usb 1-1.4: reset full-speed USB device number 99 using dwc_otg Dez 11 15:03:21 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:21 volumio kernel: usb 1-1.2: new full-speed USB device number 101 using dwc_otg Dez 11 15:03:21 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:21 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:21 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:21 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:21 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:21 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:21 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0081/input/input257 Dez 11 15:03:21 volumio kernel: hid-multitouch 0003:0484:5750.0081: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:21 volumio kernel: usb 1-1.4: USB disconnect, device number 99 Dez 11 15:03:21 volumio go-librespot[2395]: time="2025-12-11T15:03:21+01:00" level=trace msg="sent dealer ping" Dez 11 15:03:21 volumio go-librespot[2395]: time="2025-12-11T15:03:21+01:00" level=trace msg="received dealer pong" Dez 11 15:03:21 volumio kernel: usb 1-1.4: new full-speed USB device number 102 using dwc_otg Dez 11 15:03:21 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:21 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:21 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:22 volumio kernel: usb 1-1.2: reset full-speed USB device number 101 using dwc_otg Dez 11 15:03:22 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:22 volumio kernel: usb 1-1.4: new full-speed USB device number 103 using dwc_otg Dez 11 15:03:22 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:22 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:22 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:22 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:22 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:22 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:22 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0082/input/input259 Dez 11 15:03:22 volumio kernel: hid-multitouch 0003:0484:5750.0082: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:22 volumio kernel: usb 1-1.2: USB disconnect, device number 101 Dez 11 15:03:23 volumio kernel: usb 1-1.2: new full-speed USB device number 104 using dwc_otg Dez 11 15:03:23 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:23 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:23 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:23 volumio kernel: usb 1-1.4: reset full-speed USB device number 103 using dwc_otg Dez 11 15:03:23 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 11 15:03:23 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:24 volumio kernel: usb 1-1.2: new full-speed USB device number 105 using dwc_otg Dez 11 15:03:24 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:24 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:24 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:24 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:24 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:24 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:24 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0083/input/input261 Dez 11 15:03:24 volumio kernel: hid-multitouch 0003:0484:5750.0083: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:24 volumio kernel: usb 1-1.4: USB disconnect, device number 103 Dez 11 15:03:24 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:03:24 volumio kernel: usb 1-1.4: new full-speed USB device number 106 using dwc_otg Dez 11 15:03:24 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:24 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:24 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:24 volumio kernel: usb 1-1.2: reset full-speed USB device number 105 using dwc_otg Dez 11 15:03:24 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:24 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:25 volumio kernel: usb 1-1.4: new full-speed USB device number 107 using dwc_otg Dez 11 15:03:25 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:25 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:25 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:25 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:25 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:25 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:25 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0084/input/input263 Dez 11 15:03:25 volumio kernel: hid-multitouch 0003:0484:5750.0084: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:25 volumio kernel: usb 1-1.2: USB disconnect, device number 105 Dez 11 15:03:25 volumio kernel: usb 1-1.2: new full-speed USB device number 108 using dwc_otg Dez 11 15:03:25 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:25 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:25 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:25 volumio kernel: usb 1-1.4: reset full-speed USB device number 107 using dwc_otg Dez 11 15:03:26 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:26 volumio kernel: usb 1-1.2: new full-speed USB device number 109 using dwc_otg Dez 11 15:03:26 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:26 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:26 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:26 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:26 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:26 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:26 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0085/input/input265 Dez 11 15:03:26 volumio kernel: hid-multitouch 0003:0484:5750.0085: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:26 volumio kernel: usb 1-1.4: USB disconnect, device number 107 Dez 11 15:03:26 volumio kernel: usb 1-1.4: new full-speed USB device number 110 using dwc_otg Dez 11 15:03:26 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:26 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:26 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:27 volumio volumio-remote-updater[688]: [2025-12-11 15:03:27] [connect] Successful connection Dez 11 15:03:27 volumio kernel: usb 1-1.2: reset full-speed USB device number 109 using dwc_otg Dez 11 15:03:27 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:27 volumio volumio[1300]: info: [MyVolumio PluginManager] MyVolumio plugin successfully loaded Dez 11 15:03:27 volumio kernel: usb 1-1.4: new full-speed USB device number 111 using dwc_otg Dez 11 15:03:27 volumio volumio[1300]: info: [MyVolumio PluginManager] Starting plugin system_controller.my_volumio Dez 11 15:03:27 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:03:27 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:03:27 volumio volumio[1300]: info: Starting MyVolumio Remote Streaming Endpoints Dez 11 15:03:27 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:27 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:27 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:27 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:27 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:27 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:27 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0086/input/input267 Dez 11 15:03:27 volumio kernel: hid-multitouch 0003:0484:5750.0086: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:27 volumio kernel: usb 1-1.2: USB disconnect, device number 109 Dez 11 15:03:27 volumio volumio[1300]: info: MyVolumio login type: Token Dez 11 15:03:28 volumio kernel: usb 1-1.2: new full-speed USB device number 112 using dwc_otg Dez 11 15:03:28 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:28 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:28 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:28 volumio volumio[1300]: info: [MyVolumio PluginManager] MyVolumio plugin successfully started Dez 11 15:03:28 volumio volumio[1300]: info: [MyVolumio PluginManager] Loading plugin "streaming_services"... Dez 11 15:03:28 volumio kernel: usb 1-1.4: reset full-speed USB device number 111 using dwc_otg Dez 11 15:03:28 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:28 volumio kernel: usb 1-1.2: new full-speed USB device number 113 using dwc_otg Dez 11 15:03:29 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:29 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:29 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:29 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:29 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:29 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:29 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0087/input/input269 Dez 11 15:03:29 volumio kernel: hid-multitouch 0003:0484:5750.0087: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:29 volumio kernel: usb 1-1.4: USB disconnect, device number 111 Dez 11 15:03:29 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:03:29 volumio kernel: usb 1-1.4: new full-speed USB device number 114 using dwc_otg Dez 11 15:03:29 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:29 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:29 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:29 volumio kernel: usb 1-1.2: reset full-speed USB device number 113 using dwc_otg Dez 11 15:03:30 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:30 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:30 volumio kernel: usb 1-1.4: new full-speed USB device number 115 using dwc_otg Dez 11 15:03:30 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:30 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:30 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:30 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:30 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:30 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:30 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0088/input/input271 Dez 11 15:03:30 volumio kernel: hid-multitouch 0003:0484:5750.0088: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:30 volumio kernel: usb 1-1.2: USB disconnect, device number 113 Dez 11 15:03:30 volumio kernel: usb 1-1.2: new full-speed USB device number 116 using dwc_otg Dez 11 15:03:30 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:30 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:30 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:31 volumio kernel: usb 1-1.4: reset full-speed USB device number 115 using dwc_otg Dez 11 15:03:31 volumio kernel: usb 1-1.2: new full-speed USB device number 117 using dwc_otg Dez 11 15:03:31 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:31 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:31 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:31 volumio kernel: usb 1-1-port2: attempt power cycle Dez 11 15:03:32 volumio kernel: usb 1-1.5: reset low-speed USB device number 4 using dwc_otg Dez 11 15:03:33 volumio kernel: usb 1-1.2: new full-speed USB device number 118 using dwc_otg Dez 11 15:03:33 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:33 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:33 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:33 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:33 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:33 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:33 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0089/input/input273 Dez 11 15:03:33 volumio kernel: hid-multitouch 0003:0484:5750.0089: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:33 volumio kernel: usb 1-1.4: USB disconnect, device number 115 Dez 11 15:03:33 volumio kernel: usb 1-1.4: new full-speed USB device number 119 using dwc_otg Dez 11 15:03:34 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:34 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:34 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:34 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:03:34 volumio kernel: usb 1-1.2: reset full-speed USB device number 118 using dwc_otg Dez 11 15:03:34 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:34 volumio kernel: usb 1-1.4: new full-speed USB device number 120 using dwc_otg Dez 11 15:03:34 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:34 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:34 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:34 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:34 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:34 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:34 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.008A/input/input275 Dez 11 15:03:34 volumio kernel: hid-multitouch 0003:0484:5750.008A: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:34 volumio kernel: usb 1-1.2: USB disconnect, device number 118 Dez 11 15:03:35 volumio kernel: usb 1-1.2: new full-speed USB device number 121 using dwc_otg Dez 11 15:03:35 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:35 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:35 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:35 volumio kernel: usb 1-1.4: reset full-speed USB device number 120 using dwc_otg Dez 11 15:03:35 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:36 volumio kernel: usb 1-1.2: new full-speed USB device number 122 using dwc_otg Dez 11 15:03:36 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:36 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:36 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:36 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:36 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:36 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:36 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.008B/input/input277 Dez 11 15:03:36 volumio kernel: hid-multitouch 0003:0484:5750.008B: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:36 volumio kernel: usb 1-1.4: USB disconnect, device number 120 Dez 11 15:03:36 volumio kernel: usb 1-1.4: new full-speed USB device number 123 using dwc_otg Dez 11 15:03:36 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:36 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:36 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:36 volumio kernel: usb 1-1.2: reset full-speed USB device number 122 using dwc_otg Dez 11 15:03:37 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:37 volumio volumio[1300]: info: [MyVolumio PluginManager] Streaming Services plugin successfully loaded Dez 11 15:03:37 volumio volumio[1300]: info: [MyVolumio PluginManager] Starting plugin music_service.streaming_services Dez 11 15:03:37 volumio volumio[1300]: info: Streaming services startup Dez 11 15:03:37 volumio volumio[1300]: info: Starting Streaming Daemon Dez 11 15:03:37 volumio volumio[1300]: info: [MyVolumio PluginManager] Streaming Services plugin successfully started Dez 11 15:03:37 volumio sudo[2922]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart volumio-streaming-daemon.service Dez 11 15:03:37 volumio sudo[2922]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:03:37 volumio sudo[2922]: pam_unix(sudo:session): session closed for user root Dez 11 15:03:37 volumio kernel: usb 1-1.4: new full-speed USB device number 124 using dwc_otg Dez 11 15:03:37 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:37 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:37 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:37 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:37 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:37 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:37 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.008C/input/input279 Dez 11 15:03:37 volumio kernel: hid-multitouch 0003:0484:5750.008C: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:37 volumio kernel: usb 1-1.2: USB disconnect, device number 122 Dez 11 15:03:37 volumio volumio[1300]: verbose: New Socket.io Connection to 192.168.1.175 from 192.168.1.186 UA: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/17.7 Safari/605.1.15 Engine version: 3 Transport: polling Total Clients: 20 Dez 11 15:03:37 volumio kernel: usb 1-1.2: new full-speed USB device number 125 using dwc_otg Dez 11 15:03:37 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:37 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:37 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:38 volumio kernel: usb 1-1.4: reset full-speed USB device number 124 using dwc_otg Dez 11 15:03:38 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:38 volumio kernel: usb 1-1.2: new full-speed USB device number 126 using dwc_otg Dez 11 15:03:38 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:38 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:38 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:38 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:38 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:38 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:38 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.008D/input/input281 Dez 11 15:03:38 volumio kernel: hid-multitouch 0003:0484:5750.008D: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:38 volumio kernel: usb 1-1.4: USB disconnect, device number 124 Dez 11 15:03:39 volumio kernel: usb 1-1.4: new full-speed USB device number 127 using dwc_otg Dez 11 15:03:39 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:03:39 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:39 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:39 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:39 volumio volumio[1300]: info: BOOT COMPLETED Dez 11 15:03:39 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:03:39 volumio kernel: usb 1-1.2: reset full-speed USB device number 126 using dwc_otg Dez 11 15:03:39 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:39 volumio kernel: usb 1-1.4: new full-speed USB device number 5 using dwc_otg Dez 11 15:03:40 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:40 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:40 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:40 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:40 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:40 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:40 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.008E/input/input283 Dez 11 15:03:40 volumio kernel: hid-multitouch 0003:0484:5750.008E: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:40 volumio kernel: usb 1-1.2: USB disconnect, device number 126 Dez 11 15:03:40 volumio kernel: usb 1-1.2: new full-speed USB device number 6 using dwc_otg Dez 11 15:03:40 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:40 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:40 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:40 volumio kernel: usb 1-1.4: reset full-speed USB device number 5 using dwc_otg Dez 11 15:03:40 volumio volumio[1300]: verbose: New Socket.io Connection to 192.168.1.175 from 192.168.1.186 UA: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/17.7 Safari/605.1.15 Engine version: 3 Transport: polling Total Clients: 21 Dez 11 15:03:40 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:40 volumio volumio[1300]: error: Cannot start Volumio Streaming Daemon Dez 11 15:03:40 volumio volumio[1300]: error: Failed initialization of streaming services: Error: Error: Command failed: /usr/bin/sudo systemctl restart volumio-streaming-daemon.service Dez 11 15:03:40 volumio volumio[1300]: Failed to restart volumio-streaming-daemon.service: Unit volumio-streaming-daemon.service not found. Dez 11 15:03:41 volumio kernel: usb 1-1.2: new full-speed USB device number 7 using dwc_otg Dez 11 15:03:41 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:41 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:41 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:41 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:41 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:41 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:41 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.008F/input/input285 Dez 11 15:03:41 volumio kernel: hid-multitouch 0003:0484:5750.008F: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:41 volumio kernel: usb 1-1.4: USB disconnect, device number 5 Dez 11 15:03:41 volumio kernel: usb 1-1.4: new full-speed USB device number 8 using dwc_otg Dez 11 15:03:41 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:41 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:41 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:42 volumio volumio-remote-updater[688]: [2025-12-11 15:03:42] [connect] Successful connection Dez 11 15:03:42 volumio kernel: usb 1-1.2: reset full-speed USB device number 7 using dwc_otg Dez 11 15:03:42 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:42 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:42 volumio kernel: usb 1-1.4: new full-speed USB device number 9 using dwc_otg Dez 11 15:03:42 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:42 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:42 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:42 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:42 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:42 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:42 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0090/input/input287 Dez 11 15:03:42 volumio kernel: hid-multitouch 0003:0484:5750.0090: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:42 volumio kernel: usb 1-1.2: USB disconnect, device number 7 Dez 11 15:03:42 volumio kernel: usb 1-1.2: new full-speed USB device number 10 using dwc_otg Dez 11 15:03:43 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:43 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:43 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:43 volumio kernel: usb 1-1.4: reset full-speed USB device number 9 using dwc_otg Dez 11 15:03:43 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:43 volumio kernel: usb 1-1.2: new full-speed USB device number 11 using dwc_otg Dez 11 15:03:43 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:43 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:43 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:43 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:43 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:43 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:43 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0091/input/input289 Dez 11 15:03:43 volumio kernel: hid-multitouch 0003:0484:5750.0091: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:44 volumio kernel: usb 1-1.4: USB disconnect, device number 9 Dez 11 15:03:44 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:03:44 volumio kernel: usb 1-1.4: new full-speed USB device number 12 using dwc_otg Dez 11 15:03:44 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:44 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:44 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:44 volumio kernel: usb 1-1.2: reset full-speed USB device number 11 using dwc_otg Dez 11 15:03:45 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:45 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:45 volumio kernel: usb 1-1.4: new full-speed USB device number 13 using dwc_otg Dez 11 15:03:45 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:45 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:45 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:45 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:45 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:45 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:45 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0092/input/input291 Dez 11 15:03:45 volumio kernel: hid-multitouch 0003:0484:5750.0092: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:45 volumio kernel: usb 1-1.2: USB disconnect, device number 11 Dez 11 15:03:45 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Dez 11 15:03:45 volumio kernel: usb 1-1.2: new full-speed USB device number 14 using dwc_otg Dez 11 15:03:45 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:45 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:45 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:46 volumio kernel: usb 1-1.4: reset full-speed USB device number 13 using dwc_otg Dez 11 15:03:46 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:46 volumio kernel: usb 1-1.2: new full-speed USB device number 15 using dwc_otg Dez 11 15:03:46 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:46 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:46 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:46 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:46 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:46 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:46 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0093/input/input293 Dez 11 15:03:46 volumio kernel: hid-multitouch 0003:0484:5750.0093: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:46 volumio kernel: usb 1-1.4: USB disconnect, device number 13 Dez 11 15:03:47 volumio kernel: usb 1-1.4: new full-speed USB device number 16 using dwc_otg Dez 11 15:03:47 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:47 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:47 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:47 volumio kernel: usb 1-1.2: reset full-speed USB device number 15 using dwc_otg Dez 11 15:03:47 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:47 volumio kernel: usb 1-1.4: new full-speed USB device number 17 using dwc_otg Dez 11 15:03:48 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:48 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:48 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:48 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:48 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:48 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:48 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0094/input/input295 Dez 11 15:03:48 volumio kernel: hid-multitouch 0003:0484:5750.0094: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:48 volumio kernel: usb 1-1.2: USB disconnect, device number 15 Dez 11 15:03:48 volumio kernel: usb 1-1.2: new full-speed USB device number 18 using dwc_otg Dez 11 15:03:48 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:48 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:48 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:48 volumio kernel: usb 1-1.4: reset full-speed USB device number 17 using dwc_otg Dez 11 15:03:48 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:49 volumio kernel: usb 1-1.2: new full-speed USB device number 19 using dwc_otg Dez 11 15:03:49 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:49 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:49 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:49 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:49 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:49 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:49 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0095/input/input297 Dez 11 15:03:49 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:03:49 volumio kernel: hid-multitouch 0003:0484:5750.0095: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:49 volumio kernel: usb 1-1.4: USB disconnect, device number 17 Dez 11 15:03:49 volumio kernel: usb 1-1.4: new full-speed USB device number 20 using dwc_otg Dez 11 15:03:49 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:49 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:49 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:50 volumio kernel: usb 1-1.2: reset full-speed USB device number 19 using dwc_otg Dez 11 15:03:50 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 11 15:03:50 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:50 volumio kernel: usb 1-1.4: new full-speed USB device number 21 using dwc_otg Dez 11 15:03:50 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:50 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:50 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:50 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:50 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:50 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:50 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0096/input/input299 Dez 11 15:03:50 volumio kernel: hid-multitouch 0003:0484:5750.0096: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:50 volumio kernel: usb 1-1.2: USB disconnect, device number 19 Dez 11 15:03:51 volumio kernel: usb 1-1.2: new full-speed USB device number 22 using dwc_otg Dez 11 15:03:51 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:51 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:51 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:51 volumio kernel: usb 1-1.4: reset full-speed USB device number 21 using dwc_otg Dez 11 15:03:51 volumio go-librespot[2395]: time="2025-12-11T15:03:51+01:00" level=trace msg="sent dealer ping" Dez 11 15:03:51 volumio go-librespot[2395]: time="2025-12-11T15:03:51+01:00" level=trace msg="received dealer pong" Dez 11 15:03:51 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 11 15:03:51 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 11 15:03:51 volumio kernel: usb 1-1.2: new full-speed USB device number 23 using dwc_otg Dez 11 15:03:52 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:52 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:52 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:52 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:52 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:52 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:52 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0097/input/input301 Dez 11 15:03:52 volumio kernel: hid-multitouch 0003:0484:5750.0097: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:52 volumio kernel: usb 1-1.4: USB disconnect, device number 21 Dez 11 15:03:52 volumio kernel: usb 1-1.4: new full-speed USB device number 24 using dwc_otg Dez 11 15:03:52 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:52 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:52 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:52 volumio kernel: usb 1-1.2: reset full-speed USB device number 23 using dwc_otg Dez 11 15:03:53 volumio kernel: usb 1-1.4: new full-speed USB device number 25 using dwc_otg Dez 11 15:03:53 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:53 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:53 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:53 volumio kernel: usb 1-1-port4: attempt power cycle Dez 11 15:03:53 volumio kernel: usb 1-1.2: reset full-speed USB device number 23 using dwc_otg Dez 11 15:03:53 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:53 volumio kernel: usb 1-1.4: new full-speed USB device number 26 using dwc_otg Dez 11 15:03:53 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:53 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:53 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:53 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:53 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:53 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:54 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0098/input/input303 Dez 11 15:03:54 volumio kernel: hid-multitouch 0003:0484:5750.0098: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:54 volumio kernel: usb 1-1.2: USB disconnect, device number 23 Dez 11 15:03:54 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:03:54 volumio kernel: usb 1-1.2: new full-speed USB device number 27 using dwc_otg Dez 11 15:03:54 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:54 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:54 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:54 volumio kernel: usb 1-1.4: reset full-speed USB device number 26 using dwc_otg Dez 11 15:03:54 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:55 volumio kernel: usb 1-1.2: new full-speed USB device number 28 using dwc_otg Dez 11 15:03:55 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:55 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:55 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:55 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:55 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:55 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:55 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0099/input/input305 Dez 11 15:03:55 volumio kernel: hid-multitouch 0003:0484:5750.0099: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:55 volumio kernel: usb 1-1.4: USB disconnect, device number 26 Dez 11 15:03:55 volumio kernel: usb 1-1.4: new full-speed USB device number 29 using dwc_otg Dez 11 15:03:55 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:55 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:55 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:56 volumio kernel: usb 1-1.2: reset full-speed USB device number 28 using dwc_otg Dez 11 15:03:56 volumio kernel: usb 1-1.2: reset full-speed USB device number 28 using dwc_otg Dez 11 15:03:56 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:56 volumio kernel: usb 1-1.4: new full-speed USB device number 30 using dwc_otg Dez 11 15:03:56 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:56 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:56 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:56 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:56 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:56 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:56 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.009A/input/input307 Dez 11 15:03:56 volumio kernel: hid-multitouch 0003:0484:5750.009A: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:56 volumio kernel: usb 1-1.2: USB disconnect, device number 28 Dez 11 15:03:57 volumio volumio-remote-updater[688]: [2025-12-11 15:03:57] [connect] Successful connection Dez 11 15:03:57 volumio sshd[3103]: Accepted password for volumio from 192.168.1.186 port 58046 ssh2 Dez 11 15:03:57 volumio sshd[3103]: pam_unix(sshd:session): session opened for user volumio(uid=1000) by (uid=0) Dez 11 15:03:57 volumio kernel: usb 1-1.2: new full-speed USB device number 31 using dwc_otg Dez 11 15:03:57 volumio systemd[1]: Created slice user-1000.slice - User Slice of UID 1000. Dez 11 15:03:57 volumio systemd[1]: Starting user-runtime-dir@1000.service - User Runtime Directory /run/user/1000... Dez 11 15:03:57 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:57 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:03:57 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:03:57 volumio systemd-logind[673]: New session 1 of user volumio. Dez 11 15:03:57 volumio systemd[1]: Finished user-runtime-dir@1000.service - User Runtime Directory /run/user/1000. Dez 11 15:03:57 volumio systemd[1]: Starting user@1000.service - User Manager for UID 1000... Dez 11 15:03:57 volumio kernel: usb 1-1.4: reset full-speed USB device number 30 using dwc_otg Dez 11 15:03:57 volumio (systemd)[3129]: pam_unix(systemd-user:session): session opened for user volumio(uid=1000) by (uid=0) Dez 11 15:03:57 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:03:58 volumio kernel: usb 1-1.2: new full-speed USB device number 32 using dwc_otg Dez 11 15:03:58 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:58 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:58 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:58 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:03:58 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:58 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:03:58 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.009B/input/input309 Dez 11 15:03:58 volumio kernel: hid-multitouch 0003:0484:5750.009B: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:03:58 volumio kernel: usb 1-1.4: USB disconnect, device number 30 Dez 11 15:03:58 volumio kernel: usb 1-1.4: new full-speed USB device number 33 using dwc_otg Dez 11 15:03:58 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:03:58 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:03:58 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:03:58 volumio systemd[3129]: Queued start job for default target default.target. Dez 11 15:03:58 volumio systemd[3129]: Created slice app.slice - User Application Slice. Dez 11 15:03:58 volumio systemd[3129]: Reached target paths.target - Paths. Dez 11 15:03:58 volumio systemd[3129]: Reached target timers.target - Timers. Dez 11 15:03:58 volumio systemd[3129]: Starting dbus.socket - D-Bus User Message Bus Socket... Dez 11 15:03:59 volumio systemd[3129]: Listening on dirmngr.socket - GnuPG network certificate management daemon. Dez 11 15:03:59 volumio systemd[3129]: Listening on gpg-agent-browser.socket - GnuPG cryptographic agent and passphrase cache (access for web browsers). Dez 11 15:03:59 volumio systemd[3129]: Listening on gpg-agent-extra.socket - GnuPG cryptographic agent and passphrase cache (restricted). Dez 11 15:03:59 volumio systemd[3129]: Listening on gpg-agent-ssh.socket - GnuPG cryptographic agent (ssh-agent emulation). Dez 11 15:03:59 volumio systemd[3129]: Listening on gpg-agent.socket - GnuPG cryptographic agent and passphrase cache. Dez 11 15:03:59 volumio systemd[3129]: Listening on dbus.socket - D-Bus User Message Bus Socket. Dez 11 15:03:59 volumio systemd[3129]: Reached target sockets.target - Sockets. Dez 11 15:03:59 volumio systemd[3129]: Reached target basic.target - Basic System. Dez 11 15:03:59 volumio systemd[1]: Started user@1000.service - User Manager for UID 1000. Dez 11 15:03:59 volumio systemd[1]: Started session-1.scope - Session 1 of User volumio. Dez 11 15:03:59 volumio systemd[3129]: Started mpris-proxy.service - Bluetooth mpris proxy. Dez 11 15:03:59 volumio systemd[3129]: Reached target default.target - Main User Target. Dez 11 15:03:59 volumio systemd[3129]: Startup finished in 1.187s. Dez 11 15:03:59 volumio kernel: usb 1-1.2: reset full-speed USB device number 32 using dwc_otg Dez 11 15:03:59 volumio systemd[3129]: Created slice session.slice - User Core Session Slice. Dez 11 15:03:59 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:03:59 volumio systemd[3129]: Starting dbus.service - D-Bus User Message Bus... Dez 11 15:03:59 volumio systemd[3129]: Started dbus.service - D-Bus User Message Bus. Dez 11 15:03:59 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:03:59 volumio kernel: usb 1-1.4: new full-speed USB device number 34 using dwc_otg Dez 11 15:03:59 volumio sshd[3103]: pam_env(sshd:session): deprecated reading of user environment enabled Dez 11 15:03:59 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:03:59 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:03:59 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:03:59 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:03:59 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:03:59 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:03:59 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.009C/input/input311 Dez 11 15:03:59 volumio kernel: hid-multitouch 0003:0484:5750.009C: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:03:59 volumio kernel: usb 1-1.2: USB disconnect, device number 32 Dez 11 15:04:00 volumio kernel: usb 1-1.2: new full-speed USB device number 35 using dwc_otg Dez 11 15:04:00 volumio volumio[1300]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 22 Dez 11 15:04:00 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:00 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:00 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:00 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getConfigParam Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getConfigParam Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: appearance , getConfigParam Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: mpd , getMyCollectionStatsObject Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::volumioGetBrowseSources Dez 11 15:04:00 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Dez 11 15:04:00 volumio kernel: usb 1-1.4: reset full-speed USB device number 34 using dwc_otg Dez 11 15:04:00 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:00 volumio volumio[1300]: error: MyVolumio got a network error: A network error (such as timeout, interrupted connection or unreachable host) has occurred. Dez 11 15:04:00 volumio volumio[1300]: info: Retrying Login Due to Network Error Dez 11 15:04:00 volumio kernel: usb 1-1.2: new full-speed USB device number 36 using dwc_otg Dez 11 15:04:00 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:00 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:00 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:00 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:00 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:00 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:00 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.009D/input/input313 Dez 11 15:04:00 volumio kernel: hid-multitouch 0003:0484:5750.009D: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:00 volumio kernel: usb 1-1.4: USB disconnect, device number 34 Dez 11 15:04:01 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:01 volumio kernel: usb 1-1.4: new full-speed USB device number 37 using dwc_otg Dez 11 15:04:01 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:01 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:01 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:01 volumio volumio[1300]: SPOTIFY: User informations: {"country":"DE","display_name":"zaffford","email":"home@holz-arc.de","explicit_content":{"filter_enabled":false,"filter_locked":false},"external_urls":{"spotify":"https://open.spotify.com/user/zaffford"},"followers":{"href":null,"total":2},"href":"https://api.spotify.com/v1/users/zaffford","id":"zaffford","images":[{"height":300,"url":"https://i.scdn.co/image/ab6775700000ee85977d7ca9d99f336be9856828","width":300},{"height":64,"url":"https://i.scdn.co/image/ab67757000003b82977d7ca9d99f336be9856828","width":64}],"product":"premium","type":"user","uri":"spotify:user:zaffford"} Dez 11 15:04:01 volumio volumio[1300]: info: Spotify Successfully logged in Dez 11 15:04:01 volumio volumio[1300]: info: CoreCommandRouter::volumioAddToBrowseSources[object Object] Dez 11 15:04:01 volumio volumio[1300]: info: [1765461841552] CoreMusicLibrary::Adding element Spotify Dez 11 15:04:01 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Dez 11 15:04:01 volumio volumio[1300]: Cannot find translation for source Bandcamp Discover Dez 11 15:04:01 volumio volumio[1300]: Cannot find translation for source SoundCloud Dez 11 15:04:01 volumio volumio[1300]: Cannot find translation for source Radio Paradise Dez 11 15:04:01 volumio volumio[1300]: Cannot find translation for source Spotify Dez 11 15:04:01 volumio kernel: usb 1-1.2: reset full-speed USB device number 36 using dwc_otg Dez 11 15:04:01 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:02 volumio volumio[1300]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 14 Dez 11 15:04:02 volumio volumio[1300]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 15 Dez 11 15:04:02 volumio kernel: usb 1-1.4: new full-speed USB device number 38 using dwc_otg Dez 11 15:04:02 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:02 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:02 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:02 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:02 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:02 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:02 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:02 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.009E/input/input315 Dez 11 15:04:02 volumio kernel: hid-multitouch 0003:0484:5750.009E: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:02 volumio kernel: usb 1-1.2: USB disconnect, device number 36 Dez 11 15:04:02 volumio kernel: usb 1-1.2: new full-speed USB device number 39 using dwc_otg Dez 11 15:04:02 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:02 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:02 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:02 volumio volumio[1300]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 16 Dez 11 15:04:02 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:02 volumio kernel: usb 1-1.4: reset full-speed USB device number 38 using dwc_otg Dez 11 15:04:03 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:03 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:03 volumio kernel: usb 1-1.2: new full-speed USB device number 40 using dwc_otg Dez 11 15:04:03 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:03 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:03 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:03 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:03 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:03 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:03 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.009F/input/input317 Dez 11 15:04:03 volumio kernel: hid-multitouch 0003:0484:5750.009F: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:03 volumio kernel: usb 1-1.4: USB disconnect, device number 38 Dez 11 15:04:03 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:03 volumio volumio[1300]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 17 Dez 11 15:04:03 volumio kernel: usb 1-1.4: new full-speed USB device number 41 using dwc_otg Dez 11 15:04:03 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:03 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:03 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:04 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:04 volumio kernel: usb 1-1.2: reset full-speed USB device number 40 using dwc_otg Dez 11 15:04:04 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:04 volumio sudo[3218]: volumio : PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Dez 11 15:04:04 volumio sudo[3218]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:04 volumio sudo[3220]: volumio : PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Dez 11 15:04:04 volumio sudo[3220]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:04 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:04:04 volumio sudo[3218]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:04 volumio sudo[3220]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:04 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:04 volumio kernel: usb 1-1.4: new full-speed USB device number 42 using dwc_otg Dez 11 15:04:04 volumio volumio[1300]: verbose: New Socket.io Connection to 192.168.1.175 from 192.168.1.186 UA: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/17.7 Safari/605.1.15 Engine version: 3 Transport: polling Total Clients: 18 Dez 11 15:04:04 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:04 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:04 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:04 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:04 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:04 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:04 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00A0/input/input319 Dez 11 15:04:04 volumio kernel: hid-multitouch 0003:0484:5750.00A0: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:04 volumio kernel: usb 1-1.2: USB disconnect, device number 40 Dez 11 15:04:04 volumio volumio[1300]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 19 Dez 11 15:04:04 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:05 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:05 volumio kernel: usb 1-1.2: new full-speed USB device number 43 using dwc_otg Dez 11 15:04:05 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:05 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:05 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:05 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Dez 11 15:04:05 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::volumioGetVisibleSources Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:05 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Dez 11 15:04:05 volumio volumio[1300]: info: Received Get System Info Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 11 15:04:05 volumio volumio[1300]: info: Discovery: Getting this device information Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:05 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:05 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:05 volumio kernel: usb 1-1.4: reset full-speed USB device number 42 using dwc_otg Dez 11 15:04:05 volumio volumio[1300]: info: Listing playlists Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Dez 11 15:04:05 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:05 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:05 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: updater_comm , getUpdateMessageCache Dez 11 15:04:05 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:06 volumio kernel: usb 1-1.2: new full-speed USB device number 44 using dwc_otg Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 11 15:04:06 volumio volumio[1300]: info: Received Get System Info Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 11 15:04:06 volumio volumio[1300]: info: Discovery: Getting this device information Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:06 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 11 15:04:06 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:06 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:06 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:06 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:06 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:06 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:06 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00A1/input/input321 Dez 11 15:04:06 volumio kernel: hid-multitouch 0003:0484:5750.00A1: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:06 volumio kernel: usb 1-1.4: USB disconnect, device number 42 Dez 11 15:04:06 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:06 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:06 volumio kernel: usb 1-1.4: new full-speed USB device number 45 using dwc_otg Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 11 15:04:06 volumio volumio[1300]: info: Received Get System Info Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 11 15:04:06 volumio volumio[1300]: info: Discovery: Getting this device information Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:06 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 11 15:04:06 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:06 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:06 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:06 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:06 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:07 volumio kernel: usb 1-1.2: reset full-speed USB device number 44 using dwc_otg Dez 11 15:04:07 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , setMyVolumioToken Dez 11 15:04:07 volumio volumio[1300]: info: MyVolumio login type: Token Dez 11 15:04:07 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , setMyVolumioToken Dez 11 15:04:07 volumio volumio[1300]: info: MyVolumio login type: Token Dez 11 15:04:07 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:07 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:07 volumio volumio[1300]: SPOTIFY: RECEIVED VOLUMIO VOLUME 100 Dez 11 15:04:07 volumio kernel: usb 1-1.4: new full-speed USB device number 46 using dwc_otg Dez 11 15:04:07 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:07 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:07 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:07 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:07 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:07 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:07 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00A2/input/input323 Dez 11 15:04:07 volumio kernel: hid-multitouch 0003:0484:5750.00A2: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:07 volumio kernel: usb 1-1.2: USB disconnect, device number 44 Dez 11 15:04:07 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: wizard , getOnboardingWizard Dez 11 15:04:07 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:07 volumio kernel: usb 1-1.2: new full-speed USB device number 47 using dwc_otg Dez 11 15:04:08 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:08 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:08 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:08 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:08 volumio kernel: usb 1-1.4: reset full-speed USB device number 46 using dwc_otg Dez 11 15:04:08 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:08 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:08 volumio kernel: usb 1-1.2: new full-speed USB device number 48 using dwc_otg Dez 11 15:04:08 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:08 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:08 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:08 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:08 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:08 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:08 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00A3/input/input325 Dez 11 15:04:08 volumio kernel: hid-multitouch 0003:0484:5750.00A3: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:08 volumio kernel: usb 1-1.4: USB disconnect, device number 46 Dez 11 15:04:09 volumio volumio[1300]: info: MYVOLUMIO SUCCESSFULLY LOGGED IN Dez 11 15:04:09 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:09 volumio kernel: usb 1-1.4: new full-speed USB device number 49 using dwc_otg Dez 11 15:04:09 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:04:09 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:09 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:09 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:09 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 11 15:04:09 volumio volumio[1300]: info: Received Get System Info Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 11 15:04:09 volumio volumio[1300]: info: Discovery: Getting this device information Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:09 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 11 15:04:09 volumio volumio[1300]: info: Received Get System Info Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 11 15:04:09 volumio volumio[1300]: info: Discovery: Getting this device information Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::volumioGetState Dez 11 15:04:09 volumio volumio[1300]: info: CorePlayQueue::getTrack 0 Dez 11 15:04:09 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 11 15:04:09 volumio kernel: usb 1-1.2: reset full-speed USB device number 48 using dwc_otg Dez 11 15:04:09 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:09 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:10 volumio kernel: usb 1-1.4: new full-speed USB device number 50 using dwc_otg Dez 11 15:04:10 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:10 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:10 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:10 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:10 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:10 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:10 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00A4/input/input327 Dez 11 15:04:10 volumio kernel: hid-multitouch 0003:0484:5750.00A4: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:10 volumio kernel: usb 1-1.2: USB disconnect, device number 48 Dez 11 15:04:10 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:10 volumio kernel: usb 1-1.2: new full-speed USB device number 51 using dwc_otg Dez 11 15:04:10 volumio volumio[1300]: info: MyVolumio login type: Token Dez 11 15:04:10 volumio volumio[1300]: info: MyVolumio token set successfully Dez 11 15:04:10 volumio volumio[1300]: info: MYVOLUMIO: Adding device Dez 11 15:04:10 volumio volumio[1300]: info: MYVOLUMIO: Evaluating Server Dez 11 15:04:10 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:10 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:10 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:11 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:11 volumio kernel: usb 1-1.4: reset full-speed USB device number 50 using dwc_otg Dez 11 15:04:11 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:11 volumio kernel: usb 1-1.2: new full-speed USB device number 52 using dwc_otg Dez 11 15:04:11 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:11 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:11 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:11 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:11 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:11 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:11 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00A5/input/input329 Dez 11 15:04:11 volumio kernel: hid-multitouch 0003:0484:5750.00A5: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:11 volumio kernel: usb 1-1.4: USB disconnect, device number 50 Dez 11 15:04:11 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:11 volumio volumio[1300]: info: MyVolumio status changed Dez 11 15:04:11 volumio volumio[1300]: info: Streaming services startup Dez 11 15:04:11 volumio volumio[1300]: info: Starting Streaming Daemon Dez 11 15:04:11 volumio volumio[1300]: info: Removing browser output: myVolumio user plan is not superstar Dez 11 15:04:11 volumio volumio[1300]: info: Removing audio output: Dez 11 15:04:11 volumio volumio[1300]: info: Stoppping Tunnel 1 Dez 11 15:04:11 volumio sudo[3337]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart volumio-streaming-daemon.service Dez 11 15:04:12 volumio sudo[3339]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl stop sshtunnel.service Dez 11 15:04:12 volumio sudo[3337]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:12 volumio sudo[3339]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:12 volumio kernel: usb 1-1.4: new full-speed USB device number 53 using dwc_otg Dez 11 15:04:12 volumio volumio[1300]: info: Setting Geolocation for MyVolumio to eu11 Dez 11 15:04:12 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:12 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:12 volumio volumio-remote-updater[688]: [2025-12-11 15:04:12] [connect] Successful connection Dez 11 15:04:12 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:12 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:12 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:12 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:12 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:12 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:6: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:12 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:12 volumio sudo[3337]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:12 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:6: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:12 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:12 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:6: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:12 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:12 volumio sudo[3339]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:12 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 11 15:04:12 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioToken Dez 11 15:04:12 volumio volumio[1300]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: WebSocket++/0.8.2 Engine version: 3 Transport: websocket Total Clients: 17 Dez 11 15:04:12 volumio volumio-remote-updater[688]: [2025-12-11 15:04:12] [connect] WebSocket Connection 127.0.0.1:3000 v-2 "WebSocket++/0.8.2" /socket.io/?EIO=3&transport=websocket&t=1765461852 101 Dez 11 15:04:12 volumio volumio[1300]: info: Remote SSH Stopped Dez 11 15:04:12 volumio volumio[1300]: error: Cannot start Volumio Streaming Daemon Dez 11 15:04:12 volumio volumio[1300]: error: Failed initialization of streaming services: Error: Error: Command failed: /usr/bin/sudo systemctl restart volumio-streaming-daemon.service Dez 11 15:04:12 volumio volumio[1300]: Failed to restart volumio-streaming-daemon.service: Unit volumio-streaming-daemon.service not found. Dez 11 15:04:12 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:12 volumio kernel: usb 1-1.2: reset full-speed USB device number 52 using dwc_otg Dez 11 15:04:12 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:12 volumio volumio[1300]: error: Failed to add MyVolumio device: {"message":"USER_NOT_FOUND"} Dez 11 15:04:12 volumio kernel: usb 1-1.4: new full-speed USB device number 54 using dwc_otg Dez 11 15:04:12 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:12 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:12 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:12 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:12 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:12 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:12 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:12 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00A6/input/input331 Dez 11 15:04:12 volumio kernel: hid-multitouch 0003:0484:5750.00A6: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:12 volumio kernel: usb 1-1.2: USB disconnect, device number 52 Dez 11 15:04:12 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:13 volumio volumio[1300]: info: Updating MyVolumio device info Dez 11 15:04:13 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:13 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:13 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:13 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:13 volumio kernel: usb 1-1.2: new full-speed USB device number 55 using dwc_otg Dez 11 15:04:13 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:13 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:13 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:13 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:13 volumio volumio[1300]: error: Failed to update MyVolumio device: {"message":"DEVICE_NOT_FOUND"} Dez 11 15:04:13 volumio kernel: usb 1-1.4: reset full-speed USB device number 54 using dwc_otg Dez 11 15:04:13 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:13 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:14 volumio kernel: usb 1-1.2: new full-speed USB device number 56 using dwc_otg Dez 11 15:04:14 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:14 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:14 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:14 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:14 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:14 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:14 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:14 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00A7/input/input333 Dez 11 15:04:14 volumio kernel: hid-multitouch 0003:0484:5750.00A7: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:14 volumio kernel: usb 1-1.4: USB disconnect, device number 54 Dez 11 15:04:14 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:14 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:04:14 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: appearance , isLatestTOSAccepted Dez 11 15:04:14 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:14 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:14 volumio kernel: usb 1-1.4: new full-speed USB device number 57 using dwc_otg Dez 11 15:04:14 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:14 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:14 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:14 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:15 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:15 volumio kernel: usb 1-1.2: reset full-speed USB device number 56 using dwc_otg Dez 11 15:04:15 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:15 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:15 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:15 volumio kernel: usb 1-1.4: new full-speed USB device number 58 using dwc_otg Dez 11 15:04:15 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:15 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:15 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:15 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:15 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:15 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:15 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:15 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00A8/input/input335 Dez 11 15:04:15 volumio kernel: hid-multitouch 0003:0484:5750.00A8: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:15 volumio kernel: usb 1-1.2: USB disconnect, device number 56 Dez 11 15:04:15 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:15 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:16 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:16 volumio kernel: usb 1-1.2: new full-speed USB device number 59 using dwc_otg Dez 11 15:04:16 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:16 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:16 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:16 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:16 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:16 volumio kernel: usb 1-1.4: reset full-speed USB device number 58 using dwc_otg Dez 11 15:04:16 volumio volumio[1300]: info: MYVOLUMIO: Adding device Dez 11 15:04:16 volumio volumio[1300]: info: MYVOLUMIO: Evaluating Server Dez 11 15:04:16 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:16 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:16 volumio kernel: usb 1-1.2: new full-speed USB device number 60 using dwc_otg Dez 11 15:04:16 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:16 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:16 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:17 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:17 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:17 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:17 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00A9/input/input337 Dez 11 15:04:17 volumio kernel: hid-multitouch 0003:0484:5750.00A9: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:17 volumio kernel: usb 1-1.4: USB disconnect, device number 58 Dez 11 15:04:17 volumio kernel: usb 1-1.4: new full-speed USB device number 61 using dwc_otg Dez 11 15:04:17 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:17 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:17 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:17 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:17 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:17 volumio kernel: usb 1-1.2: reset full-speed USB device number 60 using dwc_otg Dez 11 15:04:17 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:17 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:18 volumio volumio[1300]: info: Setting Geolocation for MyVolumio to eu11 Dez 11 15:04:18 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:18 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:18 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:18 volumio kernel: usb 1-1.4: new full-speed USB device number 62 using dwc_otg Dez 11 15:04:18 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:18 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:18 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:18 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:18 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:18 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:18 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:18 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00AA/input/input339 Dez 11 15:04:18 volumio kernel: hid-multitouch 0003:0484:5750.00AA: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:18 volumio kernel: usb 1-1.2: USB disconnect, device number 60 Dez 11 15:04:18 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:18 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:18 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:18 volumio volumio[1300]: error: Failed to add MyVolumio device: {"message":"USER_NOT_FOUND"} Dez 11 15:04:18 volumio kernel: usb 1-1.2: new full-speed USB device number 63 using dwc_otg Dez 11 15:04:18 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:18 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:18 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:18 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:19 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:19 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:19 volumio volumio[1300]: info: Updating MyVolumio device info Dez 11 15:04:19 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:19 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:19 volumio volumio[1300]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 11 15:04:19 volumio kernel: usb 1-1.4: reset full-speed USB device number 62 using dwc_otg Dez 11 15:04:19 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:19 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:19 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:19 volumio vncserver-x11[1084]: AgentInitCheck: agent comms failure Dez 11 15:04:19 volumio kernel: usb 1-1.2: new full-speed USB device number 64 using dwc_otg Dez 11 15:04:19 volumio volumio[1300]: error: Failed to update MyVolumio device: {"message":"DEVICE_NOT_FOUND"} Dez 11 15:04:19 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:19 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:19 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:19 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:19 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:19 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:19 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:19 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00AB/input/input341 Dez 11 15:04:19 volumio kernel: hid-multitouch 0003:0484:5750.00AB: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:19 volumio kernel: usb 1-1.4: USB disconnect, device number 62 Dez 11 15:04:19 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:20 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:20 volumio kernel: usb 1-1.4: new full-speed USB device number 65 using dwc_otg Dez 11 15:04:20 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:20 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:20 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:20 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:20 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:20 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:20 volumio kernel: usb 1-1.2: reset full-speed USB device number 64 using dwc_otg Dez 11 15:04:20 volumio volumio[1300]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 11 15:04:20 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:20 volumio sudo[3511]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/chmod a+rw /etc/X11/xorg.conf.d/95-touch_display-plugin.conf Dez 11 15:04:20 volumio sudo[3511]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:20 volumio sudo[3511]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:20 volumio kernel: usb 1-1.4: new full-speed USB device number 66 using dwc_otg Dez 11 15:04:20 volumio sudo[3513]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl start getty@tty1.service Dez 11 15:04:20 volumio sudo[3513]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:20 volumio sudo[3515]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl enable getty@tty1.service Dez 11 15:04:20 volumio sudo[3515]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:21 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:21 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:21 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:21 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:21 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:21 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:21 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00AC/input/input343 Dez 11 15:04:21 volumio kernel: hid-multitouch 0003:0484:5750.00AC: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:21 volumio kernel: usb 1-1.2: USB disconnect, device number 64 Dez 11 15:04:21 volumio volumio[1300]: info: touch_display: File permissions for /etc/X11/xorg.conf.d/95-touch_display-plugin.conf set. Dez 11 15:04:21 volumio volumio[1300]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Dez 11 15:04:21 volumio sudo[3518]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl stop volumio-kiosk.service Dez 11 15:04:21 volumio sudo[3518]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:21 volumio volumio[1300]: TypeError: Cannot read properties of undefined (reading 'split') Dez 11 15:04:21 volumio volumio[1300]: at /data/plugins/user_interface/touch_display/index.js:1298:37 Dez 11 15:04:21 volumio volumio[1300]: at ChildProcess.exithandler (node:child_process:413:7) Dez 11 15:04:21 volumio volumio[1300]: at ChildProcess.emit (node:events:514:28) Dez 11 15:04:21 volumio volumio[1300]: at maybeClose (node:internal/child_process:1105:16) Dez 11 15:04:21 volumio volumio[1300]: at Socket. (node:internal/child_process:457:11) Dez 11 15:04:21 volumio volumio[1300]: at Socket.emit (node:events:514:28) Dez 11 15:04:21 volumio volumio[1300]: at Pipe. (node:net:337:12) Dez 11 15:04:21 volumio volumio[1300]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Dez 11 15:04:21 volumio systemd[1]: Created slice system-getty.slice - Slice /system/getty. Dez 11 15:04:21 volumio systemd[1]: Started getty@tty1.service - Getty on tty1. Dez 11 15:04:21 volumio sudo[3513]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:21 volumio systemd[1]: Reloading. Dez 11 15:04:21 volumio kernel: usb 1-1.2: new full-speed USB device number 67 using dwc_otg Dez 11 15:04:21 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:21 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:21 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:21 volumio go-librespot[2395]: time="2025-12-11T15:04:21+01:00" level=trace msg="sent dealer ping" Dez 11 15:04:21 volumio go-librespot[2395]: time="2025-12-11T15:04:21+01:00" level=trace msg="received dealer pong" Dez 11 15:04:21 volumio kernel: usb 1-1.4: reset full-speed USB device number 66 using dwc_otg Dez 11 15:04:21 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:22 volumio kernel: usb 1-1.2: new full-speed USB device number 68 using dwc_otg Dez 11 15:04:22 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:22 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:22 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:22 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:22 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:22 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:22 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00AD/input/input345 Dez 11 15:04:22 volumio kernel: hid-multitouch 0003:0484:5750.00AD: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:22 volumio kernel: usb 1-1.4: USB disconnect, device number 66 Dez 11 15:04:22 volumio kernel: usb 1-1.4: new full-speed USB device number 69 using dwc_otg Dez 11 15:04:22 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:22 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:22 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:23 volumio kernel: usb 1-1.2: reset full-speed USB device number 68 using dwc_otg Dez 11 15:04:23 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:23 volumio systemd[1]: /lib/systemd/system/go-librespot-daemon.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:23 volumio systemd[1]: /lib/systemd/system/go-librespot-daemon.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 11 15:04:23 volumio kernel: usb 1-1.4: new full-speed USB device number 70 using dwc_otg Dez 11 15:04:23 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:23 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:23 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:23 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:23 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:23 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:23 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00AE/input/input347 Dez 11 15:04:23 volumio kernel: hid-multitouch 0003:0484:5750.00AE: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:23 volumio kernel: usb 1-1.2: USB disconnect, device number 68 Dez 11 15:04:23 volumio sudo[3515]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:23 volumio sudo[3518]: pam_unix(sudo:session): session closed for user root Dez 11 15:04:23 volumio kernel: usb 1-1.2: new full-speed USB device number 71 using dwc_otg Dez 11 15:04:24 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:24 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:24 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:24 volumio kernel: usb 1-1.4: reset full-speed USB device number 70 using dwc_otg Dez 11 15:04:24 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:24 volumio vncserver-x11[1084]: AgentInitCheck: no response from agent Dez 11 15:04:24 volumio kernel: usb 1-1.2: new full-speed USB device number 72 using dwc_otg Dez 11 15:04:24 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:24 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:24 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:24 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:24 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:24 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:24 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00AF/input/input349 Dez 11 15:04:24 volumio kernel: hid-multitouch 0003:0484:5750.00AF: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:24 volumio kernel: usb 1-1.4: USB disconnect, device number 70 Dez 11 15:04:25 volumio kernel: usb 1-1.4: new full-speed USB device number 73 using dwc_otg Dez 11 15:04:25 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:25 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:25 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:25 volumio kernel: usb 1-1.2: reset full-speed USB device number 72 using dwc_otg Dez 11 15:04:25 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:26 volumio kernel: usb 1-1.4: new full-speed USB device number 74 using dwc_otg Dez 11 15:04:26 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:26 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:26 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:26 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:26 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:26 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:26 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00B0/input/input351 Dez 11 15:04:26 volumio kernel: hid-multitouch 0003:0484:5750.00B0: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:26 volumio kernel: usb 1-1.2: USB disconnect, device number 72 Dez 11 15:04:26 volumio kernel: usb 1-1.2: new full-speed USB device number 75 using dwc_otg Dez 11 15:04:26 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:26 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 11 15:04:26 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 11 15:04:26 volumio kernel: usb 1-1.4: reset full-speed USB device number 74 using dwc_otg Dez 11 15:04:27 volumio kernel: usb 1-1.4: device firmware changed Dez 11 15:04:27 volumio kernel: usb 1-1.2: new full-speed USB device number 76 using dwc_otg Dez 11 15:04:27 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:27 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:27 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:27 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 11 15:04:27 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:27 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 11 15:04:27 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.00B1/input/input353 Dez 11 15:04:27 volumio kernel: hid-multitouch 0003:0484:5750.00B1: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 11 15:04:27 volumio kernel: usb 1-1.4: USB disconnect, device number 74 Dez 11 15:04:27 volumio sudo[3603]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/journalctl '--since=2025-12-11 15:03' Dez 11 15:04:27 volumio sudo[3603]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 11 15:04:27 volumio kernel: usb 1-1.4: new full-speed USB device number 77 using dwc_otg Dez 11 15:04:28 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 11 15:04:28 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 11 15:04:28 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 11 15:04:28 volumio kernel: usb 1-1.2: reset full-speed USB device number 76 using dwc_otg Dez 11 15:04:28 volumio kernel: usb 1-1.2: device firmware changed Dez 11 15:04:28 volumio kernel: usb 1-1.4: new full-speed USB device number 78 using dwc_otg Dez 11 15:04:28 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 11 15:04:28 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 11 15:04:28 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 11 15:04:28 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 11 15:04:28 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 11 15:04:28 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 11 15:04:28 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.00B2/input/input355 Dez 11 15:04:28 volumio kernel: hid-multitouch 0003:0484:5750.00B2: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 11 15:04:28 volumio kernel: usb 1-1.2: USB disconnect, device number 76 PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)" NAME="Raspbian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" VOLUMIO_BUILD_VERSION="cfdc872d40b979cca36352a7333c940c38dc64b5" VOLUMIO_FE_VERSION="35f8f4439f0076a62fefa72fd80b70701b3d6cbd" VOLUMIO_FE3_VERSION="bcca17b6b6b26edfb999e6fd7da1b222a88a61d2" VOLUMIO_BE_VERSION="6cbc2303e10f00c3a01cb7f02c6d12448bd32c62" VOLUMIO_ARCH="arm" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Fri Dec 5 20:42:14 UTC 2025" VOLUMIO_VERSION="4.073" VOLUMIO_HARDWARE="pi" VOLUMIO_DEVICENAME="Raspberry Pi" VOLUMIO_HASH="67fdc5f60f00b7a328ccd8c4ad441086"