Dez 07 15:23:00 volumio kernel: usb 1-1.4: new full-speed USB device number 46 using dwc_otg Dez 07 15:23:00 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:00 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:00 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:00 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:00 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:00 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:00 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0065/input/input201 Dez 07 15:23:00 volumio kernel: hid-multitouch 0003:0484:5750.0065: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:00 volumio kernel: usb 1-1.2: USB disconnect, device number 44 Dez 07 15:23:00 volumio kernel: usb 1-1.2: new full-speed USB device number 47 using dwc_otg Dez 07 15:23:00 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:00 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:00 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:00 volumio volumio[1258]: info: touch_display: X display number found: 0 Dez 07 15:23:00 volumio volumio[1258]: info: go-librespot daemon successfully initialized Dez 07 15:23:00 volumio volumio[1258]: info: Cannot mount NAS NAS-Musik at system boot, trial number 4 ,retrying in 5 seconds Dez 07 15:23:00 volumio kernel: usb 1-1.4: reset full-speed USB device number 46 using dwc_otg Dez 07 15:23:00 volumio volumio[1258]: Upnp client error: Error: This socket has been ended by the other party Dez 07 15:23:00 volumio volumio-remote-updater[682]: [2025-12-07 15:23:00] [connect] WebSocket Connection 127.0.0.1:3000 v-2 "WebSocket++/0.8.2" /socket.io/?EIO=3&transport=websocket&t=1765117376 101 Dez 07 15:23:00 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:01 volumio volumio[1258]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: WebSocket++/0.8.2 Engine version: 3 Transport: websocket Total Clients: 17 Dez 07 15:23:01 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:01 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:01 volumio volumio[1258]: info: touch_display: X display number found: 0 Dez 07 15:23:01 volumio kernel: usb 1-1.2: new full-speed USB device number 48 using dwc_otg Dez 07 15:23:01 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:01 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:01 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:01 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:01 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:01 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:01 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0066/input/input203 Dez 07 15:23:01 volumio kernel: hid-multitouch 0003:0484:5750.0066: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:01 volumio kernel: usb 1-1.4: USB disconnect, device number 46 Dez 07 15:23:01 volumio kernel: usb 1-1.4: new full-speed USB device number 49 using dwc_otg Dez 07 15:23:01 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:01 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:01 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:02 volumio kernel: usb 1-1.2: reset full-speed USB device number 48 using dwc_otg Dez 07 15:23:02 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:02 volumio kernel: usb 1-1.4: new full-speed USB device number 50 using dwc_otg Dez 07 15:23:02 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:02 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:02 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:02 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:02 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:02 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:02 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0067/input/input205 Dez 07 15:23:02 volumio kernel: hid-multitouch 0003:0484:5750.0067: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:02 volumio kernel: usb 1-1.2: USB disconnect, device number 48 Dez 07 15:23:02 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:02 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:03 volumio kernel: usb 1-1.2: new full-speed USB device number 51 using dwc_otg Dez 07 15:23:03 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:03 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:03 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:03 volumio volumio[1258]: info: touch_display: X display number found: 0 Dez 07 15:23:03 volumio volumio[1258]: info: touch_display: X display number found: 0 Dez 07 15:23:03 volumio kernel: usb 1-1.4: reset full-speed USB device number 50 using dwc_otg Dez 07 15:23:03 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:04 volumio kernel: usb 1-1.2: new full-speed USB device number 52 using dwc_otg Dez 07 15:23:04 volumio volumio[1258]: info: Initializing connection to go-librespot Websocket Dez 07 15:23:04 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:04 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:04 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:04 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:04 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:04 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:04 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0068/input/input207 Dez 07 15:23:04 volumio kernel: hid-multitouch 0003:0484:5750.0068: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:04 volumio kernel: usb 1-1.4: USB disconnect, device number 50 Dez 07 15:23:04 volumio volumio[1258]: info: touch_display: X display number found: 0 Dez 07 15:23:04 volumio go-librespot[1909]: time="2025-12-07T15:23:04+01:00" level=debug msg="new websocket client" Dez 07 15:23:04 volumio volumio[1258]: info: Connection to go-librespot Websocket established Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin bluetooth to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin multiroom to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin metavolumio to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin manifestui to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin cd_controller to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin smart_inputs to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin hi_res_audio to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin tidal to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin qobuz to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin tidalconnect to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin qobuzconnect to plan premium Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin bluetooth to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin multiroom to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin metavolumio to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin manifestui to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin cd_controller to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin smart_inputs to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin hi_res_audio to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin tidal to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin qobuz to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin tidalconnect to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin qobuzconnect to plan superstar Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin bluetooth to plan virtuoso Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin manifestui to plan virtuoso Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin cd_controller to plan virtuoso Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin tidal to plan virtuoso Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin qobuz to plan virtuoso Dez 07 15:23:04 volumio volumio[1258]: info: [MyVolumio PluginManager] Adding plugin tidalconnect to plan virtuoso Dez 07 15:23:04 volumio kernel: usb 1-1.4: new full-speed USB device number 53 using dwc_otg Dez 07 15:23:04 volumio volumio[1258]: info: Adding plugin bluetooth to MyMusic Plugins Dez 07 15:23:04 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:04 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:04 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:04 volumio volumio[1258]: info: Adding plugin multiroom to MyMusic Plugins Dez 07 15:23:04 volumio volumio[1258]: info: Adding plugin metavolumio to MyMusic Plugins Dez 07 15:23:04 volumio volumio[1258]: info: Adding plugin cd_controller to MyMusic Plugins Dez 07 15:23:04 volumio kernel: usb 1-1.2: reset full-speed USB device number 52 using dwc_otg Dez 07 15:23:05 volumio volumio[1258]: info: Adding plugin qobuzconnect to MyMusic Plugins Dez 07 15:23:05 volumio volumio[1258]: info: Adding plugin smart_inputs to MyMusic Plugins Dez 07 15:23:05 volumio volumio[1258]: info: Adding plugin tidalconnect to MyMusic Plugins Dez 07 15:23:05 volumio volumio[1258]: info: [MyVolumio PluginManager] Loading plugin "my_volumio"... Dez 07 15:23:05 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 07 15:23:05 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:05 volumio kernel: usb 1-1.4: new full-speed USB device number 54 using dwc_otg Dez 07 15:23:05 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:05 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:05 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:05 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:05 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:05 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:05 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0069/input/input209 Dez 07 15:23:05 volumio kernel: hid-multitouch 0003:0484:5750.0069: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:05 volumio kernel: usb 1-1.2: USB disconnect, device number 52 Dez 07 15:23:05 volumio kernel: usb 1-1.2: new full-speed USB device number 55 using dwc_otg Dez 07 15:23:05 volumio startx[1899]: xinit: giving up Dez 07 15:23:05 volumio startx[1899]: xinit: unable to connect to X server: Cannot assign requested address Dez 07 15:23:05 volumio startx[1899]: xinit: server error Dez 07 15:23:05 volumio systemd[1]: volumio-kiosk.service: Main process exited, code=exited, status=1/FAILURE Dez 07 15:23:05 volumio systemd[1]: volumio-kiosk.service: Failed with result 'exit-code'. Dez 07 15:23:05 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:05 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:05 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:06 volumio kernel: usb 1-1.4: reset full-speed USB device number 54 using dwc_otg Dez 07 15:23:06 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 07 15:23:06 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:06 volumio kernel: usb 1-1.2: new full-speed USB device number 56 using dwc_otg Dez 07 15:23:06 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:06 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:06 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:06 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:06 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:06 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:06 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.006A/input/input211 Dez 07 15:23:06 volumio kernel: hid-multitouch 0003:0484:5750.006A: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:06 volumio kernel: usb 1-1.4: USB disconnect, device number 54 Dez 07 15:23:06 volumio kernel: usb 1-1.4: new full-speed USB device number 57 using dwc_otg Dez 07 15:23:07 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:07 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:07 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:07 volumio kernel: usb 1-1.2: reset full-speed USB device number 56 using dwc_otg Dez 07 15:23:07 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:07 volumio kernel: usb 1-1.4: new full-speed USB device number 58 using dwc_otg Dez 07 15:23:07 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:07 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:07 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:07 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:07 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:07 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:07 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.006B/input/input213 Dez 07 15:23:07 volumio kernel: hid-multitouch 0003:0484:5750.006B: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:07 volumio kernel: usb 1-1.2: USB disconnect, device number 56 Dez 07 15:23:08 volumio kernel: usb 1-1.2: new full-speed USB device number 59 using dwc_otg Dez 07 15:23:08 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:08 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:08 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:08 volumio kernel: usb 1-1.4: reset full-speed USB device number 58 using dwc_otg Dez 07 15:23:08 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:09 volumio kernel: usb 1-1.2: new full-speed USB device number 60 using dwc_otg Dez 07 15:23:09 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:09 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:09 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:09 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:09 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:09 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:09 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.006C/input/input215 Dez 07 15:23:09 volumio kernel: hid-multitouch 0003:0484:5750.006C: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:09 volumio kernel: usb 1-1.4: USB disconnect, device number 58 Dez 07 15:23:09 volumio kernel: usb 1-1.4: new full-speed USB device number 61 using dwc_otg Dez 07 15:23:09 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:09 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:09 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:10 volumio kernel: usb 1-1.2: reset full-speed USB device number 60 using dwc_otg Dez 07 15:23:10 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:10 volumio kernel: usb 1-1.4: new full-speed USB device number 62 using dwc_otg Dez 07 15:23:10 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:10 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:10 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:10 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:10 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:10 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:10 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.006D/input/input217 Dez 07 15:23:10 volumio kernel: hid-multitouch 0003:0484:5750.006D: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:10 volumio kernel: usb 1-1.2: USB disconnect, device number 60 Dez 07 15:23:11 volumio kernel: usb 1-1.2: new full-speed USB device number 63 using dwc_otg Dez 07 15:23:11 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:11 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:11 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:11 volumio kernel: usb 1-1.4: reset full-speed USB device number 62 using dwc_otg Dez 07 15:23:11 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:11 volumio kernel: usb 1-1.2: new full-speed USB device number 64 using dwc_otg Dez 07 15:23:11 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:11 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:11 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:11 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:11 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:11 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:11 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.006E/input/input219 Dez 07 15:23:11 volumio kernel: hid-multitouch 0003:0484:5750.006E: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:11 volumio kernel: usb 1-1.4: USB disconnect, device number 62 Dez 07 15:23:12 volumio kernel: usb 1-1.4: new full-speed USB device number 65 using dwc_otg Dez 07 15:23:12 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:12 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:12 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:12 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:12 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:12 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:12 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 07 15:23:12 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:12 volumio kernel: usb 1-1.2: reset full-speed USB device number 64 using dwc_otg Dez 07 15:23:12 volumio kernel: usb 1-1.4: USB disconnect, device number 65 Dez 07 15:23:13 volumio kernel: usb 1-1.2: reset full-speed USB device number 64 using dwc_otg Dez 07 15:23:13 volumio kernel: usb 1-1.4: new full-speed USB device number 66 using dwc_otg Dez 07 15:23:13 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:13 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:13 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:13 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:13 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:13 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:13 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.006F/input/input221 Dez 07 15:23:13 volumio kernel: hid-multitouch 0003:0484:5750.006F: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:13 volumio kernel: usb 1-1.2: USB disconnect, device number 64 Dez 07 15:23:13 volumio kernel: usb 1-1.2: new full-speed USB device number 67 using dwc_otg Dez 07 15:23:13 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:13 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:13 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:14 volumio kernel: usb 1-1.4: reset full-speed USB device number 66 using dwc_otg Dez 07 15:23:14 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:14 volumio kernel: usb 1-1.2: new full-speed USB device number 68 using dwc_otg Dez 07 15:23:14 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:14 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:14 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:14 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:14 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:14 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:14 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0070/input/input223 Dez 07 15:23:14 volumio kernel: hid-multitouch 0003:0484:5750.0070: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:14 volumio kernel: usb 1-1.4: USB disconnect, device number 66 Dez 07 15:23:15 volumio kernel: usb 1-1.4: new full-speed USB device number 69 using dwc_otg Dez 07 15:23:15 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:15 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:15 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:15 volumio kernel: usb 1-1.2: reset full-speed USB device number 68 using dwc_otg Dez 07 15:23:15 volumio kernel: usb 1-1.2: reset full-speed USB device number 68 using dwc_otg Dez 07 15:23:15 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:16 volumio kernel: usb 1-1.4: new full-speed USB device number 70 using dwc_otg Dez 07 15:23:16 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:16 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:16 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:16 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:16 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:16 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:16 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0071/input/input225 Dez 07 15:23:16 volumio kernel: hid-multitouch 0003:0484:5750.0071: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:16 volumio kernel: usb 1-1.2: USB disconnect, device number 68 Dez 07 15:23:16 volumio kernel: usb 1-1.2: new full-speed USB device number 71 using dwc_otg Dez 07 15:23:16 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:16 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:16 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:17 volumio kernel: usb 1-1.4: reset full-speed USB device number 70 using dwc_otg Dez 07 15:23:17 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:17 volumio kernel: usb 1-1.2: new full-speed USB device number 72 using dwc_otg Dez 07 15:23:17 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:17 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:17 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:17 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:17 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:17 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:17 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0072/input/input227 Dez 07 15:23:17 volumio kernel: hid-multitouch 0003:0484:5750.0072: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:17 volumio kernel: usb 1-1.4: USB disconnect, device number 70 Dez 07 15:23:18 volumio kernel: usb 1-1.4: new full-speed USB device number 73 using dwc_otg Dez 07 15:23:18 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:18 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:18 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:18 volumio kernel: usb 1-1.2: reset full-speed USB device number 72 using dwc_otg Dez 07 15:23:18 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:18 volumio kernel: usb 1-1.4: new full-speed USB device number 74 using dwc_otg Dez 07 15:23:18 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:18 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:18 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:18 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:18 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:18 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:18 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0073/input/input229 Dez 07 15:23:18 volumio kernel: hid-multitouch 0003:0484:5750.0073: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:18 volumio kernel: usb 1-1.2: USB disconnect, device number 72 Dez 07 15:23:19 volumio kernel: usb 1-1.2: new full-speed USB device number 75 using dwc_otg Dez 07 15:23:19 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:19 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:19 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:19 volumio kernel: usb 1-1.4: reset full-speed USB device number 74 using dwc_otg Dez 07 15:23:19 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:20 volumio volumio[1258]: info: [MyVolumio PluginManager] MyVolumio plugin successfully loaded Dez 07 15:23:20 volumio volumio[1258]: info: [MyVolumio PluginManager] Starting plugin system_controller.my_volumio Dez 07 15:23:20 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:20 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:20 volumio volumio[1258]: info: Starting MyVolumio Remote Streaming Endpoints Dez 07 15:23:20 volumio kernel: usb 1-1.2: new full-speed USB device number 76 using dwc_otg Dez 07 15:23:20 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:20 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:20 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:20 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:20 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:20 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:20 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0074/input/input231 Dez 07 15:23:20 volumio kernel: hid-multitouch 0003:0484:5750.0074: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:20 volumio kernel: usb 1-1.4: USB disconnect, device number 74 Dez 07 15:23:20 volumio volumio[1258]: info: MyVolumio login type: Token Dez 07 15:23:20 volumio kernel: usb 1-1.4: new full-speed USB device number 77 using dwc_otg Dez 07 15:23:20 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:20 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:20 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:21 volumio volumio[1258]: info: [MyVolumio PluginManager] MyVolumio plugin successfully started Dez 07 15:23:21 volumio volumio[1258]: info: [MyVolumio PluginManager] Loading plugin "streaming_services"... Dez 07 15:23:21 volumio kernel: usb 1-1.2: reset full-speed USB device number 76 using dwc_otg Dez 07 15:23:21 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:21 volumio kernel: usb 1-1.4: new full-speed USB device number 78 using dwc_otg Dez 07 15:23:21 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:21 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:21 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:21 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:21 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:21 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:21 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0075/input/input233 Dez 07 15:23:21 volumio kernel: hid-multitouch 0003:0484:5750.0075: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:21 volumio kernel: usb 1-1.2: USB disconnect, device number 76 Dez 07 15:23:22 volumio kernel: usb 1-1.2: new full-speed USB device number 79 using dwc_otg Dez 07 15:23:22 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:22 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:22 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:22 volumio kernel: usb 1-1.4: reset full-speed USB device number 78 using dwc_otg Dez 07 15:23:22 volumio kernel: usb 1-1.2: new full-speed USB device number 80 using dwc_otg Dez 07 15:23:22 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:22 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:22 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:22 volumio kernel: usb 1-1-port2: attempt power cycle Dez 07 15:23:24 volumio kernel: usb 1-1.3: reset low-speed USB device number 4 using dwc_otg Dez 07 15:23:24 volumio kernel: usb 1-1.2: new full-speed USB device number 81 using dwc_otg Dez 07 15:23:24 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:24 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:24 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:24 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:24 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:24 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:24 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0076/input/input235 Dez 07 15:23:24 volumio kernel: hid-multitouch 0003:0484:5750.0076: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:24 volumio kernel: usb 1-1.4: USB disconnect, device number 78 Dez 07 15:23:25 volumio kernel: usb 1-1.4: new full-speed USB device number 82 using dwc_otg Dez 07 15:23:25 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:25 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:25 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:25 volumio kernel: usb 1-1.2: reset full-speed USB device number 81 using dwc_otg Dez 07 15:23:25 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:25 volumio kernel: usb 1-1.4: new full-speed USB device number 83 using dwc_otg Dez 07 15:23:26 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:26 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:26 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:26 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:26 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:26 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:26 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0077/input/input237 Dez 07 15:23:26 volumio kernel: hid-multitouch 0003:0484:5750.0077: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:26 volumio kernel: usb 1-1.5: USB disconnect, device number 15 Dez 07 15:23:26 volumio bluetoothd[877]: Endpoint unregistered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/source/1 Dez 07 15:23:26 volumio bluetoothd[877]: Endpoint unregistered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/source/2 Dez 07 15:23:26 volumio bluetoothd[877]: Endpoint unregistered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/sink/1 Dez 07 15:23:26 volumio bluetoothd[877]: Endpoint unregistered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/sink/2 Dez 07 15:23:26 volumio bluealsa[940]: ../src/dbus.c:47: Called: org.bluez.MediaEndpoint1.Release() on /org/bluez/hci1/A2DP/SBC/source/1 Dez 07 15:23:26 volumio bluealsa[940]: bluez.c:646: Releasing media endpoint: /org/bluez/hci1/A2DP/SBC/source/1 Dez 07 15:23:26 volumio bluealsa[940]: ../src/dbus.c:47: Called: org.bluez.MediaEndpoint1.Release() on /org/bluez/hci1/A2DP/SBC/source/2 Dez 07 15:23:26 volumio bluealsa[940]: bluez.c:646: Releasing media endpoint: /org/bluez/hci1/A2DP/SBC/source/2 Dez 07 15:23:26 volumio bluealsa[940]: ../src/dbus.c:47: Called: org.bluez.MediaEndpoint1.Release() on /org/bluez/hci1/A2DP/SBC/sink/1 Dez 07 15:23:26 volumio bluealsa[940]: bluez.c:646: Releasing media endpoint: /org/bluez/hci1/A2DP/SBC/sink/1 Dez 07 15:23:26 volumio bluealsa[940]: ../src/dbus.c:47: Called: org.bluez.MediaEndpoint1.Release() on /org/bluez/hci1/A2DP/SBC/sink/2 Dez 07 15:23:26 volumio bluealsa[940]: bluez.c:646: Releasing media endpoint: /org/bluez/hci1/A2DP/SBC/sink/2 Dez 07 15:23:26 volumio bluetoothd[877]: Destroy Adv Monitor Manager Dez 07 15:23:26 volumio bluetoothd[877]: Battery Provider Manager destroyed Dez 07 15:23:26 volumio bluealsa[940]: bluez.c:1393: Signal: org.freedesktop.DBus.ObjectManager.InterfacesRemoved(/org/bluez/hci1, ...) Dez 07 15:23:26 volumio bluealsa[940]: ../src/ba-adapter.c:144: Freeing adapter: hci1 Dez 07 15:23:26 volumio systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... Dez 07 15:23:26 volumio systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. Dez 07 15:23:26 volumio kernel: usb 1-1.5: new full-speed USB device number 84 using dwc_otg Dez 07 15:23:26 volumio kernel: usb 1-1.5: New USB device found, idVendor=0bda, idProduct=a728, bcdDevice= 2.00 Dez 07 15:23:26 volumio kernel: usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:26 volumio kernel: usb 1-1.5: Product: Bluetooth 5.4 Radio Dez 07 15:23:26 volumio kernel: usb 1-1.5: Manufacturer: Realtek Dez 07 15:23:26 volumio kernel: usb 1-1.5: SerialNumber: 00E04C239987 Dez 07 15:23:26 volumio kernel: Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761 Dez 07 15:23:26 volumio kernel: Bluetooth: hci1: RTL: rom_version status=0 version=1 Dez 07 15:23:26 volumio kernel: Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin Dez 07 15:23:26 volumio kernel: Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_config.bin Dez 07 15:23:26 volumio kernel: Bluetooth: hci1: RTL: cfg_sz 6, total sz 30210 Dez 07 15:23:26 volumio kernel: usb 1-1.2: USB disconnect, device number 81 Dez 07 15:23:26 volumio rfkill[2157]: unblock set for type bluetooth Dez 07 15:23:26 volumio rfkill[2158]: unblock set for type bluetooth Dez 07 15:23:26 volumio kernel: Bluetooth: hci1: RTL: fw version 0xdfc6d922 Dez 07 15:23:26 volumio kernel: Bluetooth: MGMT ver 1.23 Dez 07 15:23:26 volumio bluetoothd[877]: Battery Provider Manager created Dez 07 15:23:26 volumio kernel: usb 1-1.2: new full-speed USB device number 85 using dwc_otg Dez 07 15:23:26 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:26 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:26 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:26 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:26 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:26 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:27 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0078/input/input239 Dez 07 15:23:27 volumio kernel: hid-multitouch 0003:0484:5750.0078: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:27 volumio kernel: usb 1-1.4: USB disconnect, device number 83 Dez 07 15:23:27 volumio bluetoothd[877]: profiles/audio/bap.c:bap_adapter_probe() BAP requires ISO Socket which is not enabled Dez 07 15:23:27 volumio bluetoothd[877]: bap: Operation not supported (95) Dez 07 15:23:27 volumio bluetoothd[877]: Adv Monitor Manager created with supported features:0x00000000, enabled features:0x00000000, max number of supported monitors:32, max number of supported patterns:16 Dez 07 15:23:27 volumio bluealsa[940]: bluez.c:1290: Signal: org.freedesktop.DBus.ObjectManager.InterfacesAdded(/org/bluez/hci1, ...) Dez 07 15:23:27 volumio bluealsa[940]: bluez.c:153: Registering media application: /org/bluez/hci1 Dez 07 15:23:27 volumio bluealsa[940]: bluez.c:743: Exporting media endpoint object: /org/bluez/hci1/A2DP/SBC/source/1 Dez 07 15:23:27 volumio bluealsa[940]: bluez.c:743: Exporting media endpoint object: /org/bluez/hci1/A2DP/SBC/source/2 Dez 07 15:23:27 volumio bluealsa[940]: bluez.c:743: Exporting media endpoint object: /org/bluez/hci1/A2DP/SBC/sink/1 Dez 07 15:23:27 volumio bluealsa[940]: bluez.c:743: Exporting media endpoint object: /org/bluez/hci1/A2DP/SBC/sink/2 Dez 07 15:23:27 volumio bluealsa[940]: bluez.c:1290: Signal: org.freedesktop.DBus.ObjectManager.InterfacesAdded(/org/bluez/hci1, ...) Dez 07 15:23:27 volumio bluetoothd[877]: Endpoint registered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/source/2 Dez 07 15:23:27 volumio bluetoothd[877]: Endpoint registered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/sink/1 Dez 07 15:23:27 volumio bluetoothd[877]: Endpoint registered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/sink/2 Dez 07 15:23:27 volumio bluetoothd[877]: Endpoint registered: sender=:1.6 path=/org/bluez/hci1/A2DP/SBC/source/1 Dez 07 15:23:27 volumio kernel: usb 1-1.4: new full-speed USB device number 86 using dwc_otg Dez 07 15:23:27 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:27 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:27 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:27 volumio kernel: usb 1-1.2: reset full-speed USB device number 85 using dwc_otg Dez 07 15:23:28 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 07 15:23:28 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:28 volumio kernel: usb 1-1.4: new full-speed USB device number 87 using dwc_otg Dez 07 15:23:28 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:28 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:28 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:28 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:28 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:28 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:28 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0079/input/input241 Dez 07 15:23:28 volumio kernel: hid-multitouch 0003:0484:5750.0079: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:28 volumio kernel: usb 1-1.2: USB disconnect, device number 85 Dez 07 15:23:28 volumio kernel: usb 1-1.2: new full-speed USB device number 88 using dwc_otg Dez 07 15:23:28 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:28 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:28 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:28 volumio kernel: usb 1-1.4: reset full-speed USB device number 87 using dwc_otg Dez 07 15:23:29 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:29 volumio kernel: usb 1-1.2: new full-speed USB device number 89 using dwc_otg Dez 07 15:23:29 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:29 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:29 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:29 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:29 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:29 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:29 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.007A/input/input243 Dez 07 15:23:29 volumio kernel: hid-multitouch 0003:0484:5750.007A: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:29 volumio kernel: usb 1-1.4: USB disconnect, device number 87 Dez 07 15:23:29 volumio kernel: usb 1-1.4: new full-speed USB device number 90 using dwc_otg Dez 07 15:23:30 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:30 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:30 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:30 volumio kernel: usb 1-1.2: reset full-speed USB device number 89 using dwc_otg Dez 07 15:23:30 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 07 15:23:30 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:30 volumio upmpdcli[2187]: writing RSA key Dez 07 15:23:30 volumio kernel: usb 1-1.4: new full-speed USB device number 91 using dwc_otg Dez 07 15:23:30 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:30 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:30 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:30 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:30 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:30 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:30 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.007B/input/input245 Dez 07 15:23:30 volumio kernel: hid-multitouch 0003:0484:5750.007B: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:30 volumio kernel: usb 1-1.2: USB disconnect, device number 89 Dez 07 15:23:31 volumio kernel: usb 1-1.2: new full-speed USB device number 92 using dwc_otg Dez 07 15:23:31 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:31 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:31 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:31 volumio kernel: usb 1-1.4: reset full-speed USB device number 91 using dwc_otg Dez 07 15:23:31 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:31 volumio systemd[1]: systemd-rfkill.service: Deactivated successfully. Dez 07 15:23:31 volumio kernel: usb 1-1.2: new full-speed USB device number 93 using dwc_otg Dez 07 15:23:31 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:31 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:31 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:31 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:31 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:31 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:31 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.007C/input/input247 Dez 07 15:23:31 volumio kernel: hid-multitouch 0003:0484:5750.007C: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:31 volumio kernel: usb 1-1.4: USB disconnect, device number 91 Dez 07 15:23:32 volumio kernel: usb 1-1.4: new full-speed USB device number 94 using dwc_otg Dez 07 15:23:32 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:32 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:32 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:32 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:32 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:32 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:32 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 07 15:23:32 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:32 volumio kernel: usb 1-1.2: reset full-speed USB device number 93 using dwc_otg Dez 07 15:23:32 volumio kernel: usb 1-1.4: USB disconnect, device number 94 Dez 07 15:23:32 volumio kernel: usb 1-1.2: reset full-speed USB device number 93 using dwc_otg Dez 07 15:23:33 volumio kernel: usb 1-1.4: new full-speed USB device number 95 using dwc_otg Dez 07 15:23:33 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:33 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:33 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:33 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:33 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:33 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:33 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.007D/input/input249 Dez 07 15:23:33 volumio kernel: hid-multitouch 0003:0484:5750.007D: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:33 volumio kernel: usb 1-1.2: USB disconnect, device number 93 Dez 07 15:23:33 volumio kernel: usb 1-1.2: new full-speed USB device number 96 using dwc_otg Dez 07 15:23:33 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:33 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:33 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:33 volumio volumio[1258]: info: [MyVolumio PluginManager] Streaming Services plugin successfully loaded Dez 07 15:23:34 volumio volumio[1258]: info: [MyVolumio PluginManager] Starting plugin music_service.streaming_services Dez 07 15:23:34 volumio volumio[1258]: info: Streaming services startup Dez 07 15:23:34 volumio volumio[1258]: info: Starting Streaming Daemon Dez 07 15:23:34 volumio kernel: usb 1-1.4: reset full-speed USB device number 95 using dwc_otg Dez 07 15:23:34 volumio sudo[2208]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart volumio-streaming-daemon.service Dez 07 15:23:34 volumio sudo[2208]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:23:34 volumio volumio[1258]: info: [MyVolumio PluginManager] Streaming Services plugin successfully started Dez 07 15:23:34 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:34 volumio sudo[2208]: pam_unix(sudo:session): session closed for user root Dez 07 15:23:34 volumio kernel: usb 1-1.2: new full-speed USB device number 97 using dwc_otg Dez 07 15:23:34 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:34 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:34 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:34 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:34 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:34 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:34 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.007E/input/input251 Dez 07 15:23:34 volumio kernel: hid-multitouch 0003:0484:5750.007E: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:34 volumio kernel: usb 1-1.4: USB disconnect, device number 95 Dez 07 15:23:34 volumio volumio[1258]: info: Cannot mount NAS at system boot, trial number 4 ,stopping Dez 07 15:23:35 volumio kernel: usb 1-1.4: new full-speed USB device number 98 using dwc_otg Dez 07 15:23:35 volumio volumio[1258]: info: Getting Spotify volume Dez 07 15:23:35 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:35 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:35 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:35 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Dez 07 15:23:35 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:35 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Dez 07 15:23:35 volumio kernel: usb 1-1.2: reset full-speed USB device number 97 using dwc_otg Dez 07 15:23:35 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:35 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:35 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:35 volumio kernel: usb 1-1.4: new full-speed USB device number 99 using dwc_otg Dez 07 15:23:35 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:35 volumio volumio[1258]: error: Cannot start Volumio Streaming Daemon Dez 07 15:23:35 volumio volumio[1258]: error: Failed initialization of streaming services: Error: Error: Command failed: /usr/bin/sudo systemctl restart volumio-streaming-daemon.service Dez 07 15:23:35 volumio volumio[1258]: Failed to restart volumio-streaming-daemon.service: Unit volumio-streaming-daemon.service not found. Dez 07 15:23:35 volumio volumio[1258]: info: touch_display: X display number found: 0 Dez 07 15:23:35 volumio volumio[1258]: info: touch_display: X display number found: 0 Dez 07 15:23:35 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Dez 07 15:23:35 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:35 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:35 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:35 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:35 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:35 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:35 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.007F/input/input253 Dez 07 15:23:35 volumio kernel: hid-multitouch 0003:0484:5750.007F: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:35 volumio kernel: usb 1-1.2: USB disconnect, device number 97 Dez 07 15:23:36 volumio volumio[1258]: Upnp client error: Error: This socket has been ended by the other party Dez 07 15:23:36 volumio kernel: usb 1-1.2: new full-speed USB device number 100 using dwc_otg Dez 07 15:23:36 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:36 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:36 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:36 volumio kernel: usb 1-1.4: reset full-speed USB device number 99 using dwc_otg Dez 07 15:23:36 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:36 volumio volumio[1258]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 18 Dez 07 15:23:37 volumio kernel: usb 1-1.2: new full-speed USB device number 101 using dwc_otg Dez 07 15:23:37 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:37 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:37 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:37 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:37 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:37 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:37 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0080/input/input255 Dez 07 15:23:37 volumio kernel: hid-multitouch 0003:0484:5750.0080: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:37 volumio kernel: usb 1-1.4: USB disconnect, device number 99 Dez 07 15:23:37 volumio kernel: usb 1-1.4: new full-speed USB device number 102 using dwc_otg Dez 07 15:23:37 volumio volumio[1258]: verbose: New Socket.io Connection to localhost:3000 from 127.0.0.1 UA: node-XMLHttpRequest Engine version: 3 Transport: polling Total Clients: 19 Dez 07 15:23:37 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:37 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:37 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:37 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:38 volumio kernel: usb 1-1.2: reset full-speed USB device number 101 using dwc_otg Dez 07 15:23:38 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:38 volumio kernel: usb 1-1.4: new full-speed USB device number 103 using dwc_otg Dez 07 15:23:38 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:38 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:38 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:38 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:38 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:38 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:38 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0081/input/input257 Dez 07 15:23:38 volumio kernel: hid-multitouch 0003:0484:5750.0081: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:38 volumio kernel: usb 1-1.2: USB disconnect, device number 101 Dez 07 15:23:39 volumio kernel: usb 1-1.2: new full-speed USB device number 104 using dwc_otg Dez 07 15:23:39 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:39 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:39 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:39 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:39 volumio kernel: usb 1-1.4: reset full-speed USB device number 103 using dwc_otg Dez 07 15:23:39 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:39 volumio volumio-remote-updater[682]: Test mode disabled Dez 07 15:23:39 volumio volumio-remote-updater[682]: Alpha mode disabled Dez 07 15:23:39 volumio volumio-remote-updater[682]: Alpha legacy test mode disabled Dez 07 15:23:39 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateEnabled Dez 07 15:23:39 volumio kernel: usb 1-1.2: new full-speed USB device number 105 using dwc_otg Dez 07 15:23:39 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:39 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:39 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:39 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:39 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:39 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:39 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0082/input/input259 Dez 07 15:23:39 volumio kernel: hid-multitouch 0003:0484:5750.0082: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:39 volumio kernel: usb 1-1.4: USB disconnect, device number 103 Dez 07 15:23:40 volumio volumio[1258]: info: Update Ready: {"changeLogLink":"","description":"You're already on the latest version","title":"No Updates Available","updateavailable":false} Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: updater_comm , setUpdateMessageCache Dez 07 15:23:40 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:40 volumio kernel: usb 1-1.4: new full-speed USB device number 106 using dwc_otg Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getConfigParam Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getConfigParam Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: appearance , getConfigParam Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: mpd , getMyCollectionStatsObject Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::volumioGetBrowseSources Dez 07 15:23:40 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Dez 07 15:23:40 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:40 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:40 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:40 volumio kernel: usb 1-1.2: reset full-speed USB device number 105 using dwc_otg Dez 07 15:23:40 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:40 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:41 volumio kernel: usb 1-1.4: new full-speed USB device number 107 using dwc_otg Dez 07 15:23:41 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:41 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:41 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:41 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:41 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:41 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:41 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0083/input/input261 Dez 07 15:23:41 volumio kernel: hid-multitouch 0003:0484:5750.0083: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:41 volumio kernel: usb 1-1.2: USB disconnect, device number 105 Dez 07 15:23:41 volumio kernel: usb 1-1.2: new full-speed USB device number 108 using dwc_otg Dez 07 15:23:41 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:41 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:41 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:41 volumio volumio[1258]: info: MYVOLUMIO SUCCESSFULLY LOGGED IN Dez 07 15:23:42 volumio kernel: usb 1-1.4: reset full-speed USB device number 107 using dwc_otg Dez 07 15:23:42 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:42 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:42 volumio kernel: usb 1-1.2: new full-speed USB device number 109 using dwc_otg Dez 07 15:23:42 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:42 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:42 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:42 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:42 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:42 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:42 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0084/input/input263 Dez 07 15:23:42 volumio kernel: hid-multitouch 0003:0484:5750.0084: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:42 volumio kernel: usb 1-1.4: USB disconnect, device number 107 Dez 07 15:23:43 volumio kernel: usb 1-1.4: new full-speed USB device number 110 using dwc_otg Dez 07 15:23:43 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:43 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:43 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:43 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:43 volumio kernel: usb 1-1.2: reset full-speed USB device number 109 using dwc_otg Dez 07 15:23:43 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:43 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:43 volumio kernel: usbhid 1-1.2:1.0: can't add hid device: -32 Dez 07 15:23:43 volumio kernel: usbhid 1-1.2:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:43 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:43 volumio kernel: usb 1-1.4: new full-speed USB device number 111 using dwc_otg Dez 07 15:23:43 volumio volumio[1258]: info: MyVolumio token set successfully Dez 07 15:23:43 volumio volumio[1258]: info: MYVOLUMIO: Adding device Dez 07 15:23:43 volumio volumio[1258]: info: MYVOLUMIO: Evaluating Server Dez 07 15:23:43 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:43 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:43 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:43 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:43 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:43 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:43 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0085/input/input265 Dez 07 15:23:43 volumio kernel: hid-multitouch 0003:0484:5750.0085: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:43 volumio kernel: usb 1-1.2: USB disconnect, device number 109 Dez 07 15:23:44 volumio kernel: usb 1-1.2: new full-speed USB device number 112 using dwc_otg Dez 07 15:23:44 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:44 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:44 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:44 volumio volumio[1258]: SPOTIFY: RECEIVED VOLUMIO VOLUME 100 Dez 07 15:23:44 volumio volumio[1258]: SPOTIFY: SPOTIFY VOLUME undefined Dez 07 15:23:44 volumio volumio[1258]: SPOTIFY: VOLUMIO VOLUME 100 Dez 07 15:23:44 volumio volumio[1258]: info: Aligning Spotify Volume to Volumio Volume Dez 07 15:23:44 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:44 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:44 volumio volumio[1258]: info: Setting Spotify Volume from Volumio: 100 Dez 07 15:23:44 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:44 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:44 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:44 volumio kernel: usb 1-1.4: reset full-speed USB device number 111 using dwc_otg Dez 07 15:23:44 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:45 volumio kernel: usb 1-1.2: new full-speed USB device number 113 using dwc_otg Dez 07 15:23:45 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:45 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:45 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:45 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:45 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:45 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:45 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0086/input/input267 Dez 07 15:23:45 volumio kernel: hid-multitouch 0003:0484:5750.0086: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:45 volumio kernel: usb 1-1.4: USB disconnect, device number 111 Dez 07 15:23:45 volumio kernel: usb 1-1.4: new full-speed USB device number 114 using dwc_otg Dez 07 15:23:45 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:45 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:45 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:45 volumio kernel: usb 1-1.4: can't set config #1, error -32 Dez 07 15:23:45 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:45 volumio volumio[1258]: info: MyVolumio status changed Dez 07 15:23:45 volumio volumio[1258]: info: Streaming services startup Dez 07 15:23:45 volumio volumio[1258]: info: Starting Streaming Daemon Dez 07 15:23:45 volumio kernel: usb 1-1.2: reset full-speed USB device number 113 using dwc_otg Dez 07 15:23:45 volumio volumio[1258]: info: Removing browser output: myVolumio user plan is not superstar Dez 07 15:23:45 volumio volumio[1258]: info: Removing audio output: Dez 07 15:23:45 volumio volumio[1258]: info: Stoppping Tunnel 1 Dez 07 15:23:45 volumio kernel: usb 1-1.4: USB disconnect, device number 114 Dez 07 15:23:46 volumio sudo[2314]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart volumio-streaming-daemon.service Dez 07 15:23:46 volumio sudo[2314]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:23:46 volumio kernel: usb 1-1.2: reset full-speed USB device number 113 using dwc_otg Dez 07 15:23:46 volumio sudo[2316]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl stop sshtunnel.service Dez 07 15:23:46 volumio volumio[1258]: info: Setting Geolocation for MyVolumio to eu6 Dez 07 15:23:46 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:46 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:46 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:46 volumio sudo[2316]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:23:46 volumio sudo[2314]: pam_unix(sudo:session): session closed for user root Dez 07 15:23:46 volumio kernel: usb 1-1.4: new full-speed USB device number 115 using dwc_otg Dez 07 15:23:46 volumio volumio[1258]: SPOTIFY: SETTING SPOTIFY VOLUME 100 Dez 07 15:23:46 volumio volumio[1258]: info: Sending Spotify command with payload to local API: /player/volume Dez 07 15:23:46 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:6: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:23:46 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:23:46 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:6: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:23:46 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:23:46 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:6: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:23:46 volumio systemd[1]: /lib/systemd/system/sshtunnel.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:23:46 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:46 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:46 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:46 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:46 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:46 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:46 volumio sudo[2316]: pam_unix(sudo:session): session closed for user root Dez 07 15:23:46 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0087/input/input269 Dez 07 15:23:46 volumio kernel: hid-multitouch 0003:0484:5750.0087: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:46 volumio kernel: usb 1-1.2: USB disconnect, device number 113 Dez 07 15:23:46 volumio volumio[1258]: error: Cannot start Volumio Streaming Daemon Dez 07 15:23:46 volumio volumio[1258]: error: Failed initialization of streaming services: Error: Error: Command failed: /usr/bin/sudo systemctl restart volumio-streaming-daemon.service Dez 07 15:23:46 volumio volumio[1258]: Failed to restart volumio-streaming-daemon.service: Unit volumio-streaming-daemon.service not found. Dez 07 15:23:46 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:46 volumio volumio[1258]: info: Remote SSH Stopped Dez 07 15:23:46 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:46 volumio volumio[1258]: error: Failed to add MyVolumio device: {"message":"USER_NOT_FOUND"} Dez 07 15:23:46 volumio kernel: usb 1-1.2: new full-speed USB device number 116 using dwc_otg Dez 07 15:23:46 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:47 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:47 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:47 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:47 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:47 volumio volumio[1258]: info: Updating MyVolumio device info Dez 07 15:23:47 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:47 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:47 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:47 volumio kernel: usb 1-1.4: reset full-speed USB device number 115 using dwc_otg Dez 07 15:23:47 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:47 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 07 15:23:47 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:47 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:47 volumio kernel: usb 1-1.2: new full-speed USB device number 117 using dwc_otg Dez 07 15:23:47 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:47 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:47 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:47 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:47 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:47 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:47 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0088/input/input271 Dez 07 15:23:47 volumio kernel: hid-multitouch 0003:0484:5750.0088: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:47 volumio kernel: usb 1-1.4: USB disconnect, device number 115 Dez 07 15:23:47 volumio volumio[1258]: error: Failed to update MyVolumio device: {"message":"DEVICE_NOT_FOUND"} Dez 07 15:23:48 volumio kernel: usb 1-1.4: new full-speed USB device number 118 using dwc_otg Dez 07 15:23:48 volumio sudo[2337]: volumio : PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Dez 07 15:23:48 volumio sudo[2337]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:23:48 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:48 volumio sudo[2337]: pam_unix(sudo:session): session closed for user root Dez 07 15:23:48 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:48 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:48 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:48 volumio sudo[2339]: volumio : PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Dez 07 15:23:48 volumio sudo[2339]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:23:48 volumio sudo[2339]: pam_unix(sudo:session): session closed for user root Dez 07 15:23:48 volumio kernel: usb 1-1.2: reset full-speed USB device number 117 using dwc_otg Dez 07 15:23:48 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:48 volumio volumio[1258]: verbose: New Socket.io Connection to 192.168.1.174 from 192.168.1.186 UA: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/17.7 Safari/605.1.15 Engine version: 3 Transport: polling Total Clients: 19 Dez 07 15:23:48 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:48 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:48 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:48 volumio kernel: usb 1-1.4: new full-speed USB device number 119 using dwc_otg Dez 07 15:23:49 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:49 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:49 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:49 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:49 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:49 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:49 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0089/input/input273 Dez 07 15:23:49 volumio kernel: hid-multitouch 0003:0484:5750.0089: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:49 volumio kernel: usb 1-1.2: USB disconnect, device number 117 Dez 07 15:23:49 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:49 volumio kernel: usb 1-1.2: new full-speed USB device number 120 using dwc_otg Dez 07 15:23:49 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:49 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:49 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:49 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:49 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:49 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:49 volumio sudo[2380]: volumio : PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Dez 07 15:23:49 volumio sudo[2380]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:23:49 volumio sudo[2378]: volumio : PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Dez 07 15:23:49 volumio sudo[2378]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:23:49 volumio kernel: usb 1-1.4: reset full-speed USB device number 119 using dwc_otg Dez 07 15:23:49 volumio sudo[2380]: pam_unix(sudo:session): session closed for user root Dez 07 15:23:49 volumio sudo[2378]: pam_unix(sudo:session): session closed for user root Dez 07 15:23:49 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:50 volumio volumio[1258]: verbose: New Socket.io Connection to 192.168.1.174 from 192.168.1.186 UA: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/17.7 Safari/605.1.15 Engine version: 3 Transport: polling Total Clients: 20 Dez 07 15:23:50 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:50 volumio kernel: usb 1-1.2: new full-speed USB device number 121 using dwc_otg Dez 07 15:23:50 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:50 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:50 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:50 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:50 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:50 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:50 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:50 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.008A/input/input275 Dez 07 15:23:50 volumio kernel: hid-multitouch 0003:0484:5750.008A: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:50 volumio kernel: usb 1-1.4: USB disconnect, device number 119 Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Dez 07 15:23:50 volumio kernel: usb 1-1.4: new full-speed USB device number 122 using dwc_otg Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::volumioGetVisibleSources Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:50 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Dez 07 15:23:50 volumio volumio[1258]: info: Received Get System Info Dez 07 15:23:50 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:50 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:50 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 07 15:23:50 volumio volumio[1258]: info: Discovery: Getting this device information Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:50 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 07 15:23:50 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:50 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:51 volumio volumio[1258]: info: Listing playlists Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Dez 07 15:23:51 volumio kernel: usb 1-1.2: reset full-speed USB device number 121 using dwc_otg Dez 07 15:23:51 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:51 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:51 volumio volumio[1258]: info: MYVOLUMIO: Adding device Dez 07 15:23:51 volumio volumio[1258]: info: MYVOLUMIO: Evaluating Server Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:51 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: updater_comm , getUpdateMessageCache Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 07 15:23:51 volumio volumio[1258]: info: Received Get System Info Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 07 15:23:51 volumio volumio[1258]: info: Discovery: Getting this device information Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:51 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:51 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 07 15:23:51 volumio kernel: usb 1-1.4: new full-speed USB device number 123 using dwc_otg Dez 07 15:23:51 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:51 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:51 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:51 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:51 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:51 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:51 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.008B/input/input277 Dez 07 15:23:51 volumio kernel: hid-multitouch 0003:0484:5750.008B: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:51 volumio kernel: usb 1-1.2: USB disconnect, device number 121 Dez 07 15:23:52 volumio kernel: usb 1-1.2: new full-speed USB device number 124 using dwc_otg Dez 07 15:23:52 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:52 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:52 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:52 volumio kernel: usb 1-1.4: reset full-speed USB device number 123 using dwc_otg Dez 07 15:23:52 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 07 15:23:52 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:52 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:52 volumio kernel: usb 1-1.2: new full-speed USB device number 125 using dwc_otg Dez 07 15:23:52 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioToken Dez 07 15:23:52 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: wizard , getOnboardingWizard Dez 07 15:23:53 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:53 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:53 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:53 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:53 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:53 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:53 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.008C/input/input279 Dez 07 15:23:53 volumio kernel: hid-multitouch 0003:0484:5750.008C: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:53 volumio kernel: usb 1-1.4: USB disconnect, device number 123 Dez 07 15:23:53 volumio kernel: usb 1-1.4: new full-speed USB device number 126 using dwc_otg Dez 07 15:23:53 volumio volumio[1258]: info: Setting Geolocation for MyVolumio to eu7 Dez 07 15:23:53 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:53 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:53 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:53 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:53 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:53 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:53 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:53 volumio kernel: usb 1-1.2: reset full-speed USB device number 125 using dwc_otg Dez 07 15:23:53 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:54 volumio kernel: usb 1-1.4: new full-speed USB device number 127 using dwc_otg Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 07 15:23:54 volumio volumio[1258]: info: Received Get System Info Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 07 15:23:54 volumio volumio[1258]: info: Discovery: Getting this device information Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:54 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 07 15:23:54 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:54 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:54 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:54 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:54 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:54 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:54 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.008D/input/input281 Dez 07 15:23:54 volumio kernel: hid-multitouch 0003:0484:5750.008D: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:54 volumio kernel: usb 1-1.2: USB disconnect, device number 125 Dez 07 15:23:54 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:54 volumio volumio[1258]: error: MyVolumio Plugin failed to authenticate in a timely fashion Dez 07 15:23:54 volumio volumio[1258]: info: Completed starting MyVolumio Plugin Dez 07 15:23:54 volumio volumio[1258]: [Metrics] CommandRouter: 124s 21.20ms Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::volumiosetStartupVolume Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::Close All Modals sent Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::Close All Modals sent Dez 07 15:23:54 volumio volumio[1258]: info: Updating MyVolumio device info Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:54 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Dez 07 15:23:54 volumio kernel: usb 1-1.2: new full-speed USB device number 5 using dwc_otg Dez 07 15:23:54 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:54 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:54 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:54 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:55 volumio kernel: usb 1-1.4: reset full-speed USB device number 127 using dwc_otg Dez 07 15:23:55 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:55 volumio volumio[1258]: error: Failed to add MyVolumio device: {"message":"USER_NOT_FOUND"} Dez 07 15:23:55 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 07 15:23:55 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioToken Dez 07 15:23:55 volumio kernel: usb 1-1.2: new full-speed USB device number 6 using dwc_otg Dez 07 15:23:55 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:55 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:55 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:55 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:55 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:55 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:55 volumio volumio[1258]: error: Failed to update MyVolumio device: {"message":"DEVICE_NOT_FOUND"} Dez 07 15:23:55 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , checkAudioDeviceAvailable Dez 07 15:23:55 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.008E/input/input283 Dez 07 15:23:55 volumio kernel: hid-multitouch 0003:0484:5750.008E: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:55 volumio kernel: usb 1-1.4: USB disconnect, device number 127 Dez 07 15:23:55 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Dez 07 15:23:55 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , versionChangeDetect Dez 07 15:23:55 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:56 volumio kernel: usb 1-1.4: new full-speed USB device number 7 using dwc_otg Dez 07 15:23:56 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:56 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:56 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:56 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:56 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:56 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:56 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:56 volumio kernel: usbhid 1-1.4:1.0: can't add hid device: -32 Dez 07 15:23:56 volumio kernel: usbhid 1-1.4:1.0: probe with driver usbhid failed with error -32 Dez 07 15:23:56 volumio kernel: usb 1-1.2: reset full-speed USB device number 6 using dwc_otg Dez 07 15:23:56 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:56 volumio kernel: usb 1-1.4: USB disconnect, device number 7 Dez 07 15:23:56 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:56 volumio kernel: usb 1-1.2: reset full-speed USB device number 6 using dwc_otg Dez 07 15:23:56 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Dez 07 15:23:56 volumio volumio[1258]: info: Received Get System Info Dez 07 15:23:56 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Dez 07 15:23:56 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Dez 07 15:23:56 volumio volumio[1258]: info: Discovery: Getting this device information Dez 07 15:23:56 volumio volumio[1258]: info: CoreCommandRouter::volumioGetState Dez 07 15:23:56 volumio volumio[1258]: info: CorePlayQueue::getTrack 0 Dez 07 15:23:56 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Dez 07 15:23:56 volumio kernel: usb 1-1.4: new full-speed USB device number 8 using dwc_otg Dez 07 15:23:56 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:57 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:57 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:57 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:57 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:57 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:57 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:57 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.008F/input/input285 Dez 07 15:23:57 volumio kernel: hid-multitouch 0003:0484:5750.008F: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:57 volumio kernel: usb 1-1.2: USB disconnect, device number 6 Dez 07 15:23:57 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:57 volumio kernel: usb 1-1.2: new full-speed USB device number 9 using dwc_otg Dez 07 15:23:57 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:57 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:23:57 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:23:57 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:57 volumio kernel: usb 1-1.4: reset full-speed USB device number 8 using dwc_otg Dez 07 15:23:57 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:58 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:23:58 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:58 volumio kernel: usb 1-1.2: new full-speed USB device number 10 using dwc_otg Dez 07 15:23:58 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:58 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:58 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:58 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:58 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:23:58 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:58 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:23:58 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0090/input/input287 Dez 07 15:23:58 volumio kernel: hid-multitouch 0003:0484:5750.0090: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:23:58 volumio kernel: usb 1-1.4: USB disconnect, device number 8 Dez 07 15:23:58 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:58 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:58 volumio kernel: usb 1-1.4: new full-speed USB device number 11 using dwc_otg Dez 07 15:23:58 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:58 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:23:58 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:23:58 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:23:59 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:59 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:59 volumio kernel: usb 1-1.2: reset full-speed USB device number 10 using dwc_otg Dez 07 15:23:59 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:23:59 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:59 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:59 volumio kernel: usb 1-1.4: new full-speed USB device number 12 using dwc_otg Dez 07 15:23:59 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:23:59 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:23:59 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:23:59 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:23:59 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:23:59 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:23:59 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:23:59 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0091/input/input289 Dez 07 15:23:59 volumio kernel: hid-multitouch 0003:0484:5750.0091: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:23:59 volumio kernel: usb 1-1.2: USB disconnect, device number 10 Dez 07 15:23:59 volumio volumio[1258]: info: CoreCommandRouter::executeOnPlugin: appearance , isLatestTOSAccepted Dez 07 15:24:00 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:00 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:00 volumio kernel: usb 1-1.2: new full-speed USB device number 13 using dwc_otg Dez 07 15:24:00 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:00 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:00 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:24:00 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:24:00 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:00 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:00 volumio kernel: usb 1-1.4: reset full-speed USB device number 12 using dwc_otg Dez 07 15:24:00 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:24:00 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:01 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:01 volumio kernel: usb 1-1.2: new full-speed USB device number 14 using dwc_otg Dez 07 15:24:01 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:01 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:01 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:01 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:01 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:24:01 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:01 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:24:01 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0092/input/input291 Dez 07 15:24:01 volumio kernel: hid-multitouch 0003:0484:5750.0092: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:24:01 volumio kernel: usb 1-1.4: USB disconnect, device number 12 Dez 07 15:24:01 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:01 volumio kernel: usb 1-1.4: new full-speed USB device number 15 using dwc_otg Dez 07 15:24:01 volumio volumio[1258]: info: BOOT COMPLETED Dez 07 15:24:01 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:01 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:01 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:24:01 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:24:01 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:02 volumio kernel: usb 1-1.2: reset full-speed USB device number 14 using dwc_otg Dez 07 15:24:02 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:02 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:24:02 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:02 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:02 volumio kernel: usb 1-1.4: new full-speed USB device number 16 using dwc_otg Dez 07 15:24:02 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:02 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:02 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:02 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:24:02 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:02 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:24:02 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0093/input/input293 Dez 07 15:24:02 volumio kernel: hid-multitouch 0003:0484:5750.0093: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:24:02 volumio kernel: usb 1-1.2: USB disconnect, device number 14 Dez 07 15:24:02 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:02 volumio kernel: usb 1-1.2: new full-speed USB device number 17 using dwc_otg Dez 07 15:24:03 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:03 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:24:03 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:24:03 volumio sudo[2552]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl start getty@tty1.service Dez 07 15:24:03 volumio sudo[2555]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl enable getty@tty1.service Dez 07 15:24:03 volumio sudo[2555]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:24:03 volumio sudo[2550]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/chmod a+rw /etc/X11/xorg.conf.d/95-touch_display-plugin.conf Dez 07 15:24:03 volumio sudo[2550]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:24:03 volumio sudo[2550]: pam_unix(sudo:session): session closed for user root Dez 07 15:24:03 volumio kernel: usb 1-1.4: reset full-speed USB device number 16 using dwc_otg Dez 07 15:24:03 volumio sudo[2552]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:24:03 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:03 volumio volumio[1258]: error: touch_display: Xserver unix domain socket cannot be determined. Dez 07 15:24:03 volumio volumio[1258]: info: touch_display: File permissions for /etc/X11/xorg.conf.d/95-touch_display-plugin.conf set. Dez 07 15:24:03 volumio sudo[2557]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/systemctl stop volumio-kiosk.service Dez 07 15:24:03 volumio sudo[2557]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:24:03 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:24:03 volumio volumio[1258]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Dez 07 15:24:03 volumio systemd[1]: Reloading. Dez 07 15:24:03 volumio volumio[1258]: TypeError: Cannot read properties of undefined (reading 'split') Dez 07 15:24:03 volumio volumio[1258]: at /data/plugins/user_interface/touch_display/index.js:1298:37 Dez 07 15:24:03 volumio volumio[1258]: at ChildProcess.exithandler (node:child_process:413:7) Dez 07 15:24:03 volumio volumio[1258]: at ChildProcess.emit (node:events:514:28) Dez 07 15:24:03 volumio volumio[1258]: at maybeClose (node:internal/child_process:1105:16) Dez 07 15:24:03 volumio volumio[1258]: at Socket. (node:internal/child_process:457:11) Dez 07 15:24:03 volumio volumio[1258]: at Socket.emit (node:events:514:28) Dez 07 15:24:03 volumio volumio[1258]: at Pipe. (node:net:337:12) Dez 07 15:24:03 volumio volumio[1258]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Dez 07 15:24:03 volumio kernel: usb 1-1.2: new full-speed USB device number 18 using dwc_otg Dez 07 15:24:03 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:03 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:03 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:03 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:24:03 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:03 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:24:03 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0094/input/input295 Dez 07 15:24:03 volumio kernel: hid-multitouch 0003:0484:5750.0094: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:24:03 volumio kernel: usb 1-1.4: USB disconnect, device number 16 Dez 07 15:24:04 volumio kernel: usb 1-1.4: new full-speed USB device number 19 using dwc_otg Dez 07 15:24:04 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:04 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:24:04 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:24:04 volumio kernel: usb 1-1.2: reset full-speed USB device number 18 using dwc_otg Dez 07 15:24:04 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:24:05 volumio kernel: usb 1-1.4: new full-speed USB device number 20 using dwc_otg Dez 07 15:24:05 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:05 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:05 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:05 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:24:05 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:05 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:24:05 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0095/input/input297 Dez 07 15:24:05 volumio kernel: hid-multitouch 0003:0484:5750.0095: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:24:05 volumio kernel: usb 1-1.2: USB disconnect, device number 18 Dez 07 15:24:05 volumio kernel: usb 1-1.2: new full-speed USB device number 21 using dwc_otg Dez 07 15:24:05 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:05 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:24:05 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:24:05 volumio systemd[1]: /lib/systemd/system/go-librespot-daemon.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:24:05 volumio systemd[1]: /lib/systemd/system/go-librespot-daemon.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. Dez 07 15:24:06 volumio kernel: usb 1-1.4: reset full-speed USB device number 20 using dwc_otg Dez 07 15:24:06 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:24:06 volumio systemd[1]: Created slice system-getty.slice - Slice /system/getty. Dez 07 15:24:06 volumio sudo[2555]: pam_unix(sudo:session): session closed for user root Dez 07 15:24:06 volumio systemd[1]: Started getty@tty1.service - Getty on tty1. Dez 07 15:24:06 volumio sudo[2552]: pam_unix(sudo:session): session closed for user root Dez 07 15:24:06 volumio sudo[2557]: pam_unix(sudo:session): session closed for user root Dez 07 15:24:06 volumio kernel: usb 1-1.2: new full-speed USB device number 22 using dwc_otg Dez 07 15:24:06 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:06 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:06 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:06 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:24:06 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:06 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:24:06 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0096/input/input299 Dez 07 15:24:06 volumio kernel: hid-multitouch 0003:0484:5750.0096: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:24:06 volumio kernel: usb 1-1.4: USB disconnect, device number 20 Dez 07 15:24:06 volumio kernel: usb 1-1.4: new full-speed USB device number 23 using dwc_otg Dez 07 15:24:07 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:07 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:24:07 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:24:07 volumio kernel: usb 1-1.2: reset full-speed USB device number 22 using dwc_otg Dez 07 15:24:07 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:24:07 volumio kernel: usb 1-1.4: new full-speed USB device number 24 using dwc_otg Dez 07 15:24:07 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:07 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:07 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:07 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:24:07 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:07 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:24:07 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0097/input/input301 Dez 07 15:24:07 volumio kernel: hid-multitouch 0003:0484:5750.0097: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:24:07 volumio kernel: usb 1-1.2: USB disconnect, device number 22 Dez 07 15:24:08 volumio kernel: usb 1-1.2: new full-speed USB device number 25 using dwc_otg Dez 07 15:24:08 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:08 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:08 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:08 volumio kernel: usb 1-1.2: can't set config #1, error -32 Dez 07 15:24:08 volumio kernel: usb 1-1.4: reset full-speed USB device number 24 using dwc_otg Dez 07 15:24:08 volumio kernel: usb 1-1.2: USB disconnect, device number 25 Dez 07 15:24:08 volumio kernel: usb 1-1.4: reset full-speed USB device number 24 using dwc_otg Dez 07 15:24:09 volumio kernel: usb 1-1.2: new full-speed USB device number 26 using dwc_otg Dez 07 15:24:09 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:09 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:09 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:09 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:24:09 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:09 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:24:09 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.0098/input/input303 Dez 07 15:24:09 volumio kernel: hid-multitouch 0003:0484:5750.0098: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:24:09 volumio kernel: usb 1-1.4: USB disconnect, device number 24 Dez 07 15:24:09 volumio kernel: usb 1-1.4: new full-speed USB device number 27 using dwc_otg Dez 07 15:24:09 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:09 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:24:09 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:24:09 volumio kernel: usb 1-1.2: reset full-speed USB device number 26 using dwc_otg Dez 07 15:24:10 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:24:10 volumio kernel: usb 1-1.4: new full-speed USB device number 28 using dwc_otg Dez 07 15:24:10 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:10 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:10 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:10 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:24:10 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:10 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:24:10 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.0099/input/input305 Dez 07 15:24:10 volumio kernel: hid-multitouch 0003:0484:5750.0099: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:24:10 volumio kernel: usb 1-1.2: USB disconnect, device number 26 Dez 07 15:24:10 volumio kernel: usb 1-1.2: new full-speed USB device number 29 using dwc_otg Dez 07 15:24:11 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:11 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:24:11 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:24:11 volumio kernel: usb 1-1.4: reset full-speed USB device number 28 using dwc_otg Dez 07 15:24:11 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:24:11 volumio kernel: usb 1-1.2: new full-speed USB device number 30 using dwc_otg Dez 07 15:24:11 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:11 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:11 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:11 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:24:11 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:11 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:24:11 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.009A/input/input307 Dez 07 15:24:11 volumio kernel: hid-multitouch 0003:0484:5750.009A: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:24:11 volumio kernel: usb 1-1.4: USB disconnect, device number 28 Dez 07 15:24:12 volumio kernel: usb 1-1.4: new full-speed USB device number 31 using dwc_otg Dez 07 15:24:12 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:12 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:24:12 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:24:12 volumio kernel: usb 1-1.2: reset full-speed USB device number 30 using dwc_otg Dez 07 15:24:12 volumio kernel: usb 1-1.2: device firmware changed Dez 07 15:24:13 volumio kernel: usb 1-1.4: new full-speed USB device number 32 using dwc_otg Dez 07 15:24:13 volumio kernel: usb 1-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:13 volumio kernel: usb 1-1.4: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:13 volumio kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:13 volumio kernel: usb 1-1.4: Product: MPI7002 Dez 07 15:24:13 volumio kernel: usb 1-1.4: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:13 volumio kernel: usb 1-1.4: SerialNumber: STM32 Dez 07 15:24:13 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0484:5750.009B/input/input309 Dez 07 15:24:13 volumio kernel: hid-multitouch 0003:0484:5750.009B: input,hiddev97,hidraw3: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.4/input0 Dez 07 15:24:13 volumio kernel: usb 1-1.2: USB disconnect, device number 30 Dez 07 15:24:13 volumio kernel: usb 1-1.2: new full-speed USB device number 33 using dwc_otg Dez 07 15:24:13 volumio sudo[2639]: volumio : PWD=/ ; USER=root ; COMMAND=/bin/journalctl '--since=2025-12-07 15:23' Dez 07 15:24:13 volumio sudo[2639]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000) Dez 07 15:24:13 volumio kernel: usb 1-1.2: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:13 volumio kernel: usb 1-1.2: chopping to 0 config(s) Dez 07 15:24:13 volumio kernel: usb 1-1.2: can't read configurations, error -32 Dez 07 15:24:13 volumio kernel: usb 1-1.4: reset full-speed USB device number 32 using dwc_otg Dez 07 15:24:14 volumio kernel: usb 1-1.4: device firmware changed Dez 07 15:24:14 volumio kernel: usb 1-1.2: new full-speed USB device number 34 using dwc_otg Dez 07 15:24:14 volumio kernel: usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 Dez 07 15:24:14 volumio kernel: usb 1-1.2: New USB device found, idVendor=0484, idProduct=5750, bcdDevice= 2.00 Dez 07 15:24:14 volumio kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dez 07 15:24:14 volumio kernel: usb 1-1.2: Product: MPI7002 Dez 07 15:24:14 volumio kernel: usb 1-1.2: Manufacturer: QDTECH̐MPI700 Dez 07 15:24:14 volumio kernel: usb 1-1.2: SerialNumber: STM32 Dez 07 15:24:14 volumio kernel: input: QDTECH̐MPI700 MPI7002 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0484:5750.009C/input/input311 Dez 07 15:24:14 volumio kernel: hid-multitouch 0003:0484:5750.009C: input,hiddev96,hidraw2: USB HID v1.01 Device [QDTECH̐MPI700 MPI7002] on usb-3f980000.usb-1.2/input0 Dez 07 15:24:14 volumio kernel: usb 1-1.4: USB disconnect, device number 32 Dez 07 15:24:14 volumio kernel: usb 1-1.4: new full-speed USB device number 35 using dwc_otg Dez 07 15:24:14 volumio kernel: usb 1-1.4: unable to read config index 0 descriptor/start: -32 Dez 07 15:24:14 volumio kernel: usb 1-1.4: chopping to 0 config(s) Dez 07 15:24:14 volumio kernel: usb 1-1.4: can't read configurations, error -32 Dez 07 15:24:15 volumio kernel: usb 1-1.2: reset full-speed USB device number 34 using dwc_otg Dez 07 15:24:15 volumio kernel: usb 1-1.2: device firmware changed PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)" NAME="Raspbian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" VOLUMIO_BUILD_VERSION="cfdc872d40b979cca36352a7333c940c38dc64b5" VOLUMIO_FE_VERSION="35f8f4439f0076a62fefa72fd80b70701b3d6cbd" VOLUMIO_FE3_VERSION="bcca17b6b6b26edfb999e6fd7da1b222a88a61d2" VOLUMIO_BE_VERSION="6cbc2303e10f00c3a01cb7f02c6d12448bd32c62" VOLUMIO_ARCH="arm" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Fri Dec 5 20:42:14 UTC 2025" VOLUMIO_VERSION="4.073" VOLUMIO_HARDWARE="pi" VOLUMIO_DEVICENAME="Raspberry Pi" VOLUMIO_HASH="67fdc5f60f00b7a328ccd8c4ad441086"