-- Logs begin at Wed 2024-02-21 20:42:47 GMT, end at Wed 2024-02-21 20:43:34 GMT. -- Feb 21 20:42:47 volumio kernel: Booting Linux on physical CPU 0x0 Feb 21 20:42:47 volumio kernel: Linux version 6.1.69-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1710 SMP Thu Dec 21 13:17:38 GMT 2023 Feb 21 20:42:47 volumio kernel: CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d Feb 21 20:42:47 volumio kernel: CPU: div instructions available: patching division code Feb 21 20:42:47 volumio kernel: CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Feb 21 20:42:47 volumio kernel: OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 Feb 21 20:42:47 volumio kernel: random: crng init done Feb 21 20:42:47 volumio kernel: Memory policy: Data cache writealloc Feb 21 20:42:47 volumio kernel: Reserved memory: created CMA memory pool at 0x000000002a000000, size 64 MiB Feb 21 20:42:47 volumio kernel: OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Feb 21 20:42:47 volumio kernel: Zone ranges: Feb 21 20:42:47 volumio kernel: DMA [mem 0x0000000000000000-0x000000002fffffff] Feb 21 20:42:47 volumio kernel: Normal empty Feb 21 20:42:47 volumio kernel: HighMem [mem 0x0000000030000000-0x00000000fbffffff] Feb 21 20:42:47 volumio kernel: Movable zone start for each node Feb 21 20:42:47 volumio kernel: Early memory node ranges Feb 21 20:42:47 volumio kernel: node 0: [mem 0x0000000000000000-0x0000000037ffffff] Feb 21 20:42:47 volumio kernel: node 0: [mem 0x0000000040000000-0x00000000fbffffff] Feb 21 20:42:47 volumio kernel: Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] Feb 21 20:42:47 volumio kernel: percpu: Embedded 17 pages/cpu s37012 r8192 d24428 u69632 Feb 21 20:42:47 volumio kernel: pcpu-alloc: s37012 r8192 d24428 u69632 alloc=17*4096 Feb 21 20:42:47 volumio kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Feb 21 20:42:47 volumio kernel: Built 1 zonelists, mobility grouping on. Total pages: 997696 Feb 21 20:42:47 volumio kernel: Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:A1:DF:3D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 splash plymouth.ignore-serial-consoles dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0xF dwc_otg.nak_holdoff=1 quiet console=ttyS0,115200 console=tty1 imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh rootwait bootdelay=5 elevator=noop logo.nologo vt.global_cursor_default=0 net.ifnames=0 snd-bcm2835.enable_compat_alsa= snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 loglevel=0 Feb 21 20:42:47 volumio kernel: Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. Feb 21 20:42:47 volumio kernel: Unknown kernel command line parameters "splash imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh bootdelay=5", will be passed to user space. Feb 21 20:42:47 volumio kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Feb 21 20:42:47 volumio kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Feb 21 20:42:47 volumio kernel: mem auto-init: stack:off, heap alloc:off, heap free:off Feb 21 20:42:47 volumio kernel: software IO TLB: area num 4. Feb 21 20:42:47 volumio kernel: software IO TLB: mapped [mem 0x0000000023c90000-0x0000000027c90000] (64MB) Feb 21 20:42:47 volumio kernel: Memory: 3797388K/3997696K available (10240K kernel code, 1505K rwdata, 3388K rodata, 2048K init, 637K bss, 134772K reserved, 65536K cma-reserved, 3211264K highmem) Feb 21 20:42:47 volumio kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Feb 21 20:42:47 volumio kernel: ftrace: allocating 37226 entries in 110 pages Feb 21 20:42:47 volumio kernel: ftrace: allocated 110 pages with 5 groups Feb 21 20:42:47 volumio kernel: trace event string verifier disabled Feb 21 20:42:47 volumio kernel: rcu: Hierarchical RCU implementation. Feb 21 20:42:47 volumio kernel: Rude variant of Tasks RCU enabled. Feb 21 20:42:47 volumio kernel: Tracing variant of Tasks RCU enabled. Feb 21 20:42:47 volumio kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Feb 21 20:42:47 volumio kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Feb 21 20:42:47 volumio kernel: GIC: Using split EOI/Deactivate mode Feb 21 20:42:47 volumio kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention. Feb 21 20:42:47 volumio kernel: arch_timer: cp15 timer(s) running at 54.00MHz (phys). Feb 21 20:42:47 volumio kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns Feb 21 20:42:47 volumio kernel: sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns Feb 21 20:42:47 volumio kernel: Switching to timer-based delay loop, resolution 18ns Feb 21 20:42:47 volumio kernel: Console: colour dummy device 80x30 Feb 21 20:42:47 volumio kernel: printk: console [tty1] enabled Feb 21 20:42:47 volumio kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) Feb 21 20:42:47 volumio kernel: CPU: Testing write buffer coherency: ok Feb 21 20:42:47 volumio kernel: CPU0: Spectre BHB: enabling loop workaround for all CPUs Feb 21 20:42:47 volumio kernel: pid_max: default: 32768 minimum: 301 Feb 21 20:42:47 volumio kernel: LSM: Security Framework initializing Feb 21 20:42:47 volumio kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Feb 21 20:42:47 volumio kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Feb 21 20:42:47 volumio kernel: cgroup: Disabling memory control group subsystem Feb 21 20:42:47 volumio kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Feb 21 20:42:47 volumio kernel: cblist_init_generic: Setting adjustable number of callback queues. Feb 21 20:42:47 volumio kernel: cblist_init_generic: Setting shift to 2 and lim to 1. Feb 21 20:42:47 volumio kernel: cblist_init_generic: Setting adjustable number of callback queues. Feb 21 20:42:47 volumio kernel: cblist_init_generic: Setting shift to 2 and lim to 1. Feb 21 20:42:47 volumio kernel: Setting up static identity map for 0x200000 - 0x20003c Feb 21 20:42:47 volumio kernel: rcu: Hierarchical SRCU implementation. Feb 21 20:42:47 volumio kernel: rcu: Max phase no-delay instances is 1000. Feb 21 20:42:47 volumio kernel: smp: Bringing up secondary CPUs ... Feb 21 20:42:47 volumio kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Feb 21 20:42:47 volumio kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 Feb 21 20:42:47 volumio kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Feb 21 20:42:47 volumio kernel: smp: Brought up 1 node, 4 CPUs Feb 21 20:42:47 volumio kernel: SMP: Total of 4 processors activated (432.00 BogoMIPS). Feb 21 20:42:47 volumio kernel: CPU: All CPU(s) started in HYP mode. Feb 21 20:42:47 volumio kernel: CPU: Virtualization extensions available. Feb 21 20:42:47 volumio kernel: devtmpfs: initialized Feb 21 20:42:47 volumio kernel: VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 Feb 21 20:42:47 volumio kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Feb 21 20:42:47 volumio kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear) Feb 21 20:42:47 volumio kernel: pinctrl core: initialized pinctrl subsystem Feb 21 20:42:47 volumio kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family Feb 21 20:42:47 volumio kernel: DMA: preallocated 1024 KiB pool for atomic coherent allocations Feb 21 20:42:47 volumio kernel: audit: initializing netlink subsys (disabled) Feb 21 20:42:47 volumio kernel: audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 Feb 21 20:42:47 volumio kernel: thermal_sys: Registered thermal governor 'step_wise' Feb 21 20:42:47 volumio kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Feb 21 20:42:47 volumio kernel: hw-breakpoint: maximum watchpoint size is 8 bytes. Feb 21 20:42:47 volumio kernel: Serial: AMBA PL011 UART driver Feb 21 20:42:47 volumio kernel: bcm2835-mbox fe00b880.mailbox: mailbox enabled Feb 21 20:42:47 volumio kernel: raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16, variant start Feb 21 20:42:47 volumio kernel: raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7 Feb 21 20:42:47 volumio kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Feb 21 20:42:47 volumio kernel: bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 Feb 21 20:42:47 volumio kernel: SCSI subsystem initialized Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver usbfs Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver hub Feb 21 20:42:47 volumio kernel: usbcore: registered new device driver usb Feb 21 20:42:47 volumio kernel: usb_phy_generic phy: supply vcc not found, using dummy regulator Feb 21 20:42:47 volumio kernel: pps_core: LinuxPPS API ver. 1 registered Feb 21 20:42:47 volumio kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Feb 21 20:42:47 volumio kernel: PTP clock support registered Feb 21 20:42:47 volumio kernel: vgaarb: loaded Feb 21 20:42:47 volumio kernel: clocksource: Switched to clocksource arch_sys_counter Feb 21 20:42:47 volumio kernel: VFS: Disk quotas dquot_6.6.0 Feb 21 20:42:47 volumio kernel: VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Feb 21 20:42:47 volumio kernel: FS-Cache: Loaded Feb 21 20:42:47 volumio kernel: CacheFiles: Loaded Feb 21 20:42:47 volumio kernel: NET: Registered PF_INET protocol family Feb 21 20:42:47 volumio kernel: IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Feb 21 20:42:47 volumio kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Feb 21 20:42:47 volumio kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Feb 21 20:42:47 volumio kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Feb 21 20:42:47 volumio kernel: TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Feb 21 20:42:47 volumio kernel: TCP: Hash tables configured (established 8192 bind 8192) Feb 21 20:42:47 volumio kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Feb 21 20:42:47 volumio kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Feb 21 20:42:47 volumio kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family Feb 21 20:42:47 volumio kernel: RPC: Registered named UNIX socket transport module. Feb 21 20:42:47 volumio kernel: RPC: Registered udp transport module. Feb 21 20:42:47 volumio kernel: RPC: Registered tcp transport module. Feb 21 20:42:47 volumio kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. Feb 21 20:42:47 volumio kernel: PCI: CLS 0 bytes, default 64 Feb 21 20:42:47 volumio kernel: Trying to unpack rootfs image as initramfs... Feb 21 20:42:47 volumio kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available Feb 21 20:42:47 volumio kernel: Initialise system trusted keyrings Feb 21 20:42:47 volumio kernel: workingset: timestamp_bits=14 max_order=20 bucket_order=6 Feb 21 20:42:47 volumio kernel: zbud: loaded Feb 21 20:42:47 volumio kernel: NFS: Registering the id_resolver key type Feb 21 20:42:47 volumio kernel: Key type id_resolver registered Feb 21 20:42:47 volumio kernel: Key type id_legacy registered Feb 21 20:42:47 volumio kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering... Feb 21 20:42:47 volumio kernel: nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Feb 21 20:42:47 volumio kernel: Key type asymmetric registered Feb 21 20:42:47 volumio kernel: Asymmetric key parser 'x509' registered Feb 21 20:42:47 volumio kernel: bounce: pool size: 64 pages Feb 21 20:42:47 volumio kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Feb 21 20:42:47 volumio kernel: io scheduler mq-deadline registered Feb 21 20:42:47 volumio kernel: io scheduler kyber registered Feb 21 20:42:47 volumio kernel: brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: Feb 21 20:42:47 volumio kernel: brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] Feb 21 20:42:47 volumio kernel: brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 Feb 21 20:42:47 volumio kernel: brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 Feb 21 20:42:47 volumio kernel: brcm-pcie fd500000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE Feb 21 20:42:47 volumio kernel: brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 Feb 21 20:42:47 volumio kernel: pci_bus 0000:00: root bus resource [bus 00-ff] Feb 21 20:42:47 volumio kernel: pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) Feb 21 20:42:47 volumio kernel: pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 Feb 21 20:42:47 volumio kernel: pci 0000:00:00.0: PME# supported from D0 D3hot Feb 21 20:42:47 volumio kernel: PCI: bus0: Fast back to back transfers disabled Feb 21 20:42:47 volumio kernel: pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator Feb 21 20:42:47 volumio kernel: pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator Feb 21 20:42:47 volumio kernel: pci_bus 0000:01: supply vpcie12v not found, using dummy regulator Feb 21 20:42:47 volumio kernel: brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) Feb 21 20:42:47 volumio kernel: pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 Feb 21 20:42:47 volumio kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] Feb 21 20:42:47 volumio kernel: pci 0000:01:00.0: PME# supported from D0 D3cold Feb 21 20:42:47 volumio kernel: PCI: bus1: Fast back to back transfers disabled Feb 21 20:42:47 volumio kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] Feb 21 20:42:47 volumio kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] Feb 21 20:42:47 volumio kernel: pci 0000:00:00.0: PCI bridge to [bus 01] Feb 21 20:42:47 volumio kernel: pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] Feb 21 20:42:47 volumio kernel: pcieport 0000:00:00.0: enabling device (0000 -> 0002) Feb 21 20:42:47 volumio kernel: pcieport 0000:00:00.0: PME: Signaling with IRQ 45 Feb 21 20:42:47 volumio kernel: bcm2708_fb soc:fb: FB found 1 display(s) Feb 21 20:42:47 volumio kernel: Console: switching to colour frame buffer device 80x30 Feb 21 20:42:47 volumio kernel: bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480 Feb 21 20:42:47 volumio kernel: iproc-rng200 fe104000.rng: hwrng registered Feb 21 20:42:47 volumio kernel: vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) Feb 21 20:42:47 volumio kernel: brd: module loaded Feb 21 20:42:47 volumio kernel: loop: module loaded Feb 21 20:42:47 volumio kernel: Loading iSCSI transport class v2.0-870. Feb 21 20:42:47 volumio kernel: bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 Feb 21 20:42:47 volumio kernel: Freeing initrd memory: 13628K Feb 21 20:42:47 volumio kernel: unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus Feb 21 20:42:47 volumio kernel: usbcore: registered new device driver r8152-cfgselector Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver r8152 Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver lan78xx Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver smsc95xx Feb 21 20:42:47 volumio kernel: xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) Feb 21 20:42:47 volumio kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller Feb 21 20:42:47 volumio kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Feb 21 20:42:47 volumio kernel: xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0f00040000000890 Feb 21 20:42:47 volumio kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller Feb 21 20:42:47 volumio kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Feb 21 20:42:47 volumio kernel: xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed Feb 21 20:42:47 volumio kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Feb 21 20:42:47 volumio kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 21 20:42:47 volumio kernel: usb usb1: Product: xHCI Host Controller Feb 21 20:42:47 volumio kernel: usb usb1: Manufacturer: Linux 6.1.69-v7l+ xhci-hcd Feb 21 20:42:47 volumio kernel: usb usb1: SerialNumber: 0000:01:00.0 Feb 21 20:42:47 volumio kernel: hub 1-0:1.0: USB hub found Feb 21 20:42:47 volumio kernel: hub 1-0:1.0: 1 port detected Feb 21 20:42:47 volumio kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Feb 21 20:42:47 volumio kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 21 20:42:47 volumio kernel: usb usb2: Product: xHCI Host Controller Feb 21 20:42:47 volumio kernel: usb usb2: Manufacturer: Linux 6.1.69-v7l+ xhci-hcd Feb 21 20:42:47 volumio kernel: usb usb2: SerialNumber: 0000:01:00.0 Feb 21 20:42:47 volumio kernel: hub 2-0:1.0: USB hub found Feb 21 20:42:47 volumio kernel: hub 2-0:1.0: 4 ports detected Feb 21 20:42:47 volumio kernel: dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Feb 21 20:42:47 volumio kernel: dwc_otg: FIQ enabled Feb 21 20:42:47 volumio kernel: dwc_otg: NAK holdoff enabled Feb 21 20:42:47 volumio kernel: dwc_otg: FIQ split-transaction FSM enabled Feb 21 20:42:47 volumio kernel: Module dwc_common_port init Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver uas Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver usb-storage Feb 21 20:42:47 volumio kernel: mousedev: PS/2 mouse device common for all mice Feb 21 20:42:47 volumio kernel: sdhci: Secure Digital Host Controller Interface driver Feb 21 20:42:47 volumio kernel: sdhci: Copyright(c) Pierre Ossman Feb 21 20:42:47 volumio kernel: sdhci-pltfm: SDHCI platform and OF driver helper Feb 21 20:42:47 volumio kernel: ledtrig-cpu: registered to indicate activity on CPUs Feb 21 20:42:47 volumio kernel: hid: raw HID events driver (C) Jiri Kosina Feb 21 20:42:47 volumio kernel: usbcore: registered new interface driver usbhid Feb 21 20:42:47 volumio kernel: usbhid: USB HID core driver Feb 21 20:42:47 volumio kernel: Initializing XFRM netlink socket Feb 21 20:42:47 volumio kernel: NET: Registered PF_PACKET protocol family Feb 21 20:42:47 volumio kernel: Key type dns_resolver registered Feb 21 20:42:47 volumio kernel: Registering SWP/SWPB emulation handler Feb 21 20:42:47 volumio kernel: registered taskstats version 1 Feb 21 20:42:47 volumio kernel: Loading compiled-in X.509 certificates Feb 21 20:42:47 volumio kernel: Key type .fscrypt registered Feb 21 20:42:47 volumio kernel: Key type fscrypt-provisioning registered Feb 21 20:42:47 volumio kernel: uart-pl011 fe201000.serial: there is not valid maps for state default Feb 21 20:42:47 volumio kernel: uart-pl011 fe201000.serial: cts_event_workaround enabled Feb 21 20:42:47 volumio kernel: fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 51, base_baud = 0) is a PL011 rev2 Feb 21 20:42:47 volumio kernel: serial serial0: tty port ttyAMA1 registered Feb 21 20:42:47 volumio kernel: bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer Feb 21 20:42:47 volumio kernel: bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver Feb 21 20:42:47 volumio kernel: mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 Feb 21 20:42:47 volumio kernel: mmc-bcm2835 fe300000.mmcnr: DMA channel allocated Feb 21 20:42:47 volumio kernel: of_cfs_init Feb 21 20:42:47 volumio kernel: of_cfs_init: OK Feb 21 20:42:47 volumio kernel: mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA Feb 21 20:42:47 volumio kernel: Freeing unused kernel image (initmem) memory: 2048K Feb 21 20:42:47 volumio kernel: Run /init as init process Feb 21 20:42:47 volumio kernel: with arguments: Feb 21 20:42:47 volumio kernel: /init Feb 21 20:42:47 volumio kernel: splash Feb 21 20:42:47 volumio kernel: with environment: Feb 21 20:42:47 volumio kernel: HOME=/ Feb 21 20:42:47 volumio kernel: TERM=linux Feb 21 20:42:47 volumio kernel: imgpart=/dev/mmcblk0p2 Feb 21 20:42:47 volumio kernel: imgfile=/volumio_current.sqsh Feb 21 20:42:47 volumio kernel: bootdelay=5 Feb 21 20:42:47 volumio kernel: mmc1: new high speed SDIO card at address 0001 Feb 21 20:42:47 volumio kernel: mmc0: new ultra high speed DDR50 SDHC card at address 5048 Feb 21 20:42:47 volumio kernel: mmcblk0: mmc0:5048 SD16G 14.4 GiB Feb 21 20:42:47 volumio kernel: mmcblk0: p1 p2 p3 Feb 21 20:42:47 volumio kernel: mmcblk0: mmc0:5048 SD16G 14.4 GiB Feb 21 20:42:47 volumio kernel: usb 1-1: new high-speed USB device number 2 using xhci_hcd Feb 21 20:42:47 volumio initramfs: Booting Volumio for BCM2711 Feb 21 20:42:47 volumio initramfs: This script mounts rootfs RO with an overlay RW layer. Feb 21 20:42:47 volumio kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Feb 21 20:42:47 volumio initramfs: IMGPART=/dev/mmcblk0p2 Feb 21 20:42:47 volumio initramfs: IMGFILE=/volumio_current.sqsh Feb 21 20:42:47 volumio initramfs: Boot delay (except first time) will be 5 seconds Feb 21 20:42:47 volumio initramfs: /dev/mmcblk0p2: Feb 21 20:42:47 volumio kernel: usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 Feb 21 20:42:47 volumio kernel: usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Feb 21 20:42:47 volumio kernel: usb 1-1: Product: USB2.0 Hub Feb 21 20:42:47 volumio kernel: hub 1-1:1.0: USB hub found Feb 21 20:42:47 volumio kernel: hub 1-1:1.0: 4 ports detected Feb 21 20:42:47 volumio kernel: EXT4-fs (mmcblk0p2): recovery complete Feb 21 20:42:47 volumio kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. Feb 21 20:42:47 volumio initramfs: Doing a 5 second delay here to give kernel load a headstart Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 3 using xhci_hcd Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio kernel: usb 1-1.3: device not accepting address 3, error -71 Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 4 using xhci_hcd Feb 21 20:42:47 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:47 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:47 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:47 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:47 volumio kernel: usb 1-1.3: USB disconnect, device number 4 Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 5 using xhci_hcd Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio kernel: usb 1-1.3: device not accepting address 5, error -71 Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 6 using xhci_hcd Feb 21 20:42:47 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:42:47 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:47 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:47 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:47 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:47 volumio kernel: usb 1-1.3: USB disconnect, device number 6 Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 7 using xhci_hcd Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio kernel: usb 1-1.3: device not accepting address 7, error -71 Feb 21 20:42:47 volumio initramfs: Checking for USB updates Feb 21 20:42:47 volumio initramfs: No USB device detected (when incorrect, try adding 'bootdelay=5' to your boot cmdline) Feb 21 20:42:47 volumio kernel: loop0: detected capacity change from 0 to 967536 Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 8 using xhci_hcd Feb 21 20:42:47 volumio kernel: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Feb 21 20:42:47 volumio kernel: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Feb 21 20:42:47 volumio kernel: EXT4-fs (mmcblk0p3): recovery complete Feb 21 20:42:47 volumio kernel: EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. Feb 21 20:42:47 volumio initramfs: With Option: Feb 21 20:42:47 volumio initramfs: VOLUMIO_VERSION="3.631" Feb 21 20:42:47 volumio initramfs: Finish initramfs, continue booting Volumio Feb 21 20:42:47 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:42:47 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:47 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:47 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:47 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:47 volumio kernel: usb 1-1.3: USB disconnect, device number 8 Feb 21 20:42:47 volumio systemd[1]: System time before build time, advancing clock. Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 9 using xhci_hcd Feb 21 20:42:47 volumio kernel: NET: Registered PF_INET6 protocol family Feb 21 20:42:47 volumio kernel: Segment Routing with IPv6 Feb 21 20:42:47 volumio kernel: In-situ OAM (IOAM) with IPv6 Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) Feb 21 20:42:47 volumio systemd[1]: Detected architecture arm. Feb 21 20:42:47 volumio systemd[1]: Set hostname to . Feb 21 20:42:47 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:47 volumio kernel: usb 1-1.3: device not accepting address 9, error -71 Feb 21 20:42:47 volumio kernel: usb 1-1.3: new high-speed USB device number 10 using xhci_hcd Feb 21 20:42:47 volumio systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly. Feb 21 20:42:47 volumio systemd[1]: Listening on initctl Compatibility Named Pipe. Feb 21 20:42:47 volumio systemd[1]: Reached target System Time Synchronized. Feb 21 20:42:47 volumio systemd[1]: Listening on fsck to fsckd communication Socket. Feb 21 20:42:47 volumio systemd[1]: Created slice system-systemd\x2dfsck.slice. Feb 21 20:42:47 volumio systemd[1]: Listening on RPCbind Server Activation Socket. Feb 21 20:42:47 volumio systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. Feb 21 20:42:47 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:42:47 volumio kernel: i2c_dev: i2c /dev entries driver Feb 21 20:42:47 volumio systemd-journald[207]: Journal started Feb 21 20:42:47 volumio systemd-journald[207]: Runtime journal (/run/log/journal/c1d531165394c79721acb5a765d65e88) is 3.7M, max 30.0M, 26.2M free. Feb 21 20:42:47 volumio systemd-modules-load[202]: Inserted module 'i2c_dev' Feb 21 20:42:47 volumio fake-hwclock[206]: Wed Feb 21 20:42:47 UTC 2024 Feb 21 20:42:47 volumio systemd[1]: Started Load/Save Random Seed. Feb 21 20:42:47 volumio systemd[1]: Started Create System Users. Feb 21 20:42:47 volumio systemd[1]: Starting Create Static Device Nodes in /dev... Feb 21 20:42:47 volumio systemd[1]: Started Create Static Device Nodes in /dev. Feb 21 20:42:47 volumio systemd[1]: Starting udev Kernel Device Manager... Feb 21 20:42:47 volumio systemd[1]: Reached target Local File Systems (Pre). Feb 21 20:42:47 volumio systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. Feb 21 20:42:47 volumio systemd[1]: Mounting /tmp... Feb 21 20:42:47 volumio systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. Feb 21 20:42:47 volumio systemd[1]: Mounting /var/log... Feb 21 20:42:47 volumio systemd[1]: Mounting /var/spool/cups... Feb 21 20:42:47 volumio systemd[1]: Started udev Coldplug all Devices. Feb 21 20:42:47 volumio systemd[1]: Mounted /tmp. Feb 21 20:42:47 volumio systemd[1]: Mounted /var/log. Feb 21 20:42:47 volumio systemd[1]: Starting Flush Journal to Persistent Storage... Feb 21 20:42:47 volumio systemd[1]: Starting Helper to synchronize boot up for ifupdown... Feb 21 20:42:47 volumio systemd[1]: Mounted /var/spool/cups. Feb 21 20:42:47 volumio systemd-udevd[228]: Network interface NamePolicy= disabled on kernel command line, ignoring. Feb 21 20:42:47 volumio systemd[1]: Mounting /var/spool/cups/tmp... Feb 21 20:42:47 volumio systemd[1]: Mounted /var/spool/cups/tmp. Feb 21 20:42:47 volumio systemd[1]: Started Helper to synchronize boot up for ifupdown. Feb 21 20:42:47 volumio systemd-journald[207]: Runtime journal (/run/log/journal/c1d531165394c79721acb5a765d65e88) is 3.7M, max 30.0M, 26.2M free. Feb 21 20:42:47 volumio systemd[1]: Started Flush Journal to Persistent Storage. Feb 21 20:42:47 volumio systemd[1]: Started udev Kernel Device Manager. Feb 21 20:42:47 volumio systemd[1]: Starting Show Plymouth Boot Screen... Feb 21 20:42:47 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:42:47 volumio systemd[1]: Received SIGRTMIN+20 from PID 268 (plymouthd). Feb 21 20:42:47 volumio systemd[1]: Started Show Plymouth Boot Screen. Feb 21 20:42:47 volumio systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Feb 21 20:42:47 volumio systemd[1]: Reached target Local Encrypted Volumes. Feb 21 20:42:47 volumio systemd[1]: Reached target Paths. Feb 21 20:42:47 volumio systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. Feb 21 20:42:47 volumio kernel: usb 1-1-port3: attempt power cycle Feb 21 20:42:47 volumio systemd-udevd[244]: Using default interface naming scheme 'v240'. Feb 21 20:42:47 volumio systemd-udevd[244]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Feb 21 20:42:47 volumio kernel: rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000 Feb 21 20:42:47 volumio kernel: rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem Feb 21 20:42:47 volumio kernel: mc: Linux media interface: v0.10 Feb 21 20:42:47 volumio kernel: vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. Feb 21 20:42:47 volumio kernel: bcm2835_vc_sm_cma_probe: Videocore shared memory driver Feb 21 20:42:47 volumio kernel: [vc_sm_connected_init]: start Feb 21 20:42:47 volumio kernel: [vc_sm_connected_init]: installed successfully Feb 21 20:42:48 volumio kernel: videodev: Linux video capture interface: v2.00 Feb 21 20:42:48 volumio kernel: bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Feb 21 20:42:48 volumio kernel: usb 1-1.3: new high-speed USB device number 11 using xhci_hcd Feb 21 20:42:48 volumio kernel: bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. Feb 21 20:42:48 volumio kernel: usb 1-1.3: device descriptor read/8, error -71 Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video10 Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 decode Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video11 Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 encode Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video12 Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 isp Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video18 Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Device registered as /dev/video31 Feb 21 20:42:48 volumio kernel: bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image Feb 21 20:42:48 volumio systemd-udevd[262]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Feb 21 20:42:48 volumio kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Feb 21 20:42:48 volumio kernel: usb 1-1.3: device descriptor read/8, error -71 Feb 21 20:42:48 volumio kernel: cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' Feb 21 20:42:48 volumio kernel: cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' Feb 21 20:42:48 volumio kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Feb 21 20:42:48 volumio kernel: bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register output node 0 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 1 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 2 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 3 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register output node 0 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 1 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 2 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Register capture node 3 with media controller Feb 21 20:42:48 volumio kernel: bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp Feb 21 20:42:48 volumio kernel: bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. Feb 21 20:42:48 volumio kernel: rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. Feb 21 20:42:48 volumio kernel: brcmfmac: F1 signature read @0x18000000=0x15264345 Feb 21 20:42:48 volumio kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Feb 21 20:42:48 volumio kernel: usbcore: registered new interface driver brcmfmac Feb 21 20:42:48 volumio kernel: rpivid feb10000.codec: Device registered as /dev/video19 Feb 21 20:42:48 volumio kernel: usb 1-1.3: new high-speed USB device number 12 using xhci_hcd Feb 21 20:42:49 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:49 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:49 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:49 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:49 volumio kernel: Bluetooth: Core ver 2.22 Feb 21 20:42:49 volumio kernel: NET: Registered PF_BLUETOOTH protocol family Feb 21 20:42:49 volumio kernel: Bluetooth: HCI device and connection manager initialized Feb 21 20:42:49 volumio kernel: Bluetooth: HCI socket layer initialized Feb 21 20:42:49 volumio kernel: Bluetooth: L2CAP socket layer initialized Feb 21 20:42:49 volumio kernel: Bluetooth: SCO socket layer initialized Feb 21 20:42:49 volumio kernel: snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. Feb 21 20:42:49 volumio kernel: snd_bcm2835: unknown parameter 'enable_compat_alsa' ignored Feb 21 20:42:49 volumio kernel: bcm2835_audio bcm2835_audio: card created with 4 channels Feb 21 20:42:49 volumio kernel: bcm2835_audio bcm2835_audio: card created with 4 channels Feb 21 20:42:49 volumio kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 Feb 21 20:42:49 volumio kernel: Bluetooth: HCI UART driver ver 2.3 Feb 21 20:42:49 volumio kernel: Bluetooth: HCI UART protocol H4 registered Feb 21 20:42:49 volumio kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered Feb 21 20:42:49 volumio kernel: Bluetooth: HCI UART protocol Broadcom registered Feb 21 20:42:49 volumio kernel: hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator Feb 21 20:42:49 volumio kernel: hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator Feb 21 20:42:49 volumio kernel: usb 1-1.3: USB disconnect, device number 12 Feb 21 20:42:49 volumio systemd-udevd[270]: Using default interface naming scheme 'v240'. Feb 21 20:42:49 volumio systemd-udevd[270]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Feb 21 20:42:49 volumio kernel: uart-pl011 fe201000.serial: no DMA platform data Feb 21 20:42:49 volumio kernel: Bluetooth: hci0: BCM: chip id 107 Feb 21 20:42:49 volumio kernel: Bluetooth: hci0: BCM: features 0x2f Feb 21 20:42:49 volumio kernel: Bluetooth: hci0: BCM4345C0 Feb 21 20:42:49 volumio kernel: Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 Feb 21 20:42:49 volumio kernel: usb 1-1.3: new high-speed USB device number 13 using xhci_hcd Feb 21 20:42:49 volumio kernel: Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch Feb 21 20:42:49 volumio kernel: usbcore: registered new interface driver snd-usb-audio Feb 21 20:42:49 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:49 volumio systemd[1]: Found device /dev/mmcblk0p1. Feb 21 20:42:49 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:42:50 volumio kernel: usb 1-1.3: device not accepting address 13, error -71 Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in /sys/subsystem/net/devices/eth0 being skipped. Feb 21 20:42:50 volumio kernel: Bluetooth: hci0: BCM: features 0x2f Feb 21 20:42:50 volumio kernel: Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ Feb 21 20:42:50 volumio kernel: Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in /sys/subsystem/net/devices/wlan0 being skipped. Feb 21 20:42:50 volumio systemd[1]: Created slice system-bthelper.slice. Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in FUSE Control File System being skipped. Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in Huge Pages File System being skipped. Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Feb 21 20:42:50 volumio systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Feb 21 20:42:50 volumio systemd[1]: Starting File System Check on /dev/mmcblk0p1... Feb 21 20:42:50 volumio systemd[1]: Starting Load/Save RF Kill Switch Status... Feb 21 20:42:50 volumio systemd[1]: Started File System Check Daemon to report status. Feb 21 20:42:50 volumio systemd[1]: Started Load/Save RF Kill Switch Status. Feb 21 20:42:50 volumio systemd-fsck[397]: fsck.fat 4.1 (2017-01-24) Feb 21 20:42:50 volumio systemd-fsck[397]: 0x25: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt. Feb 21 20:42:50 volumio systemd-fsck[397]: Automatically removing dirty bit. Feb 21 20:42:50 volumio systemd-fsck[397]: Performing changes. Feb 21 20:42:50 volumio systemd-fsck[397]: /dev/mmcblk0p1: 367 files, 33349/46774 clusters Feb 21 20:42:50 volumio systemd[1]: Started File System Check on /dev/mmcblk0p1. Feb 21 20:42:50 volumio kernel: usb 1-1.3: new high-speed USB device number 14 using xhci_hcd Feb 21 20:42:50 volumio systemd[1]: Mounting /boot... Feb 21 20:42:50 volumio systemd[1]: Mounted /boot. Feb 21 20:42:50 volumio systemd[1]: Reached target Local File Systems. Feb 21 20:42:50 volumio systemd[1]: Started ifup for wlan0. Feb 21 20:42:50 volumio systemd[1]: Started ifup for eth0. Feb 21 20:42:50 volumio systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. Feb 21 20:42:50 volumio systemd[1]: Starting Create Volatile Files and Directories... Feb 21 20:42:50 volumio systemd[1]: Starting Raise network interfaces... Feb 21 20:42:50 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:50 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:50 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:50 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:50 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:50 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:50 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:50 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:50 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:50 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:50 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:50 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:50 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:50 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:50 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:50 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:50 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:50 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:50 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:50 volumio systemd[1]: Starting Preprocess NFS configuration... Feb 21 20:42:50 volumio systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... Feb 21 20:42:50 volumio kernel: usb 1-1.3: USB disconnect, device number 14 Feb 21 20:42:50 volumio systemd[1]: plymouth-read-write.service: Succeeded. Feb 21 20:42:50 volumio systemd[1]: Started Tell Plymouth To Write Out Runtime Data. Feb 21 20:42:50 volumio systemd[1]: Received SIGRTMIN+20 from PID 268 (plymouthd). Feb 21 20:42:50 volumio systemd[1]: nfs-config.service: Succeeded. Feb 21 20:42:50 volumio systemd[1]: Started Preprocess NFS configuration. Feb 21 20:42:50 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:42:51 volumio systemd[1]: Started Create Volatile Files and Directories. Feb 21 20:42:51 volumio systemd[1]: Started Entropy daemon using the HAVEGE algorithm. Feb 21 20:42:51 volumio systemd[1]: Starting RPC bind portmap service... Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Huge Pages File System being skipped. Feb 21 20:42:51 volumio systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... Feb 21 20:42:51 volumio systemd[1]: Starting Update UTMP about System Boot/Shutdown... Feb 21 20:42:51 volumio kernel: usb 1-1.3: new high-speed USB device number 15 using xhci_hcd Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Network Time Synchronization being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in FUSE Control File System being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. Feb 21 20:42:51 volumio systemd[1]: Reached target NFS client services. Feb 21 20:42:51 volumio systemd[1]: plymouth-read-write.service: Succeeded. Feb 21 20:42:51 volumio systemd[1]: Started Tell Plymouth To Write Out Runtime Data. Feb 21 20:42:51 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Feb 21 20:42:51 volumio systemd[1]: Received SIGRTMIN+20 from PID 268 (plymouthd). Feb 21 20:42:51 volumio kernel: 8021q: 802.1Q VLAN Support v1.8 Feb 21 20:42:51 volumio systemd[1]: Started Update UTMP about System Boot/Shutdown. Feb 21 20:42:51 volumio systemd[1]: Reached target System Initialization. Feb 21 20:42:51 volumio systemd[1]: apt-daily.timer: Not using persistent file timestamp Wed 2024-04-17 15:39:44 BST as it is in the future. Feb 21 20:42:51 volumio systemd[1]: Started Daily apt download activities. Feb 21 20:42:51 volumio systemd[1]: apt-daily-upgrade.timer: Not using persistent file timestamp Wed 2024-04-17 15:39:44 BST as it is in the future. Feb 21 20:42:51 volumio systemd[1]: Started Daily apt upgrade and clean activities. Feb 21 20:42:51 volumio systemd[1]: Started Daily Cleanup of Temporary Directories. Feb 21 20:42:51 volumio systemd[1]: Reached target Timers. Feb 21 20:42:51 volumio systemd[1]: Listening on D-Bus System Message Bus Socket. Feb 21 20:42:51 volumio systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket. Feb 21 20:42:51 volumio systemd[1]: Listening on triggerhappy.socket. Feb 21 20:42:51 volumio systemd[1]: Reached target Sockets. Feb 21 20:42:51 volumio systemd[1]: Started Volumio Splash. Feb 21 20:42:51 volumio systemd[1]: Reached target Basic System. Feb 21 20:42:51 volumio systemd[1]: Started volumio-remote-updater.service. Feb 21 20:42:51 volumio systemd[501]: volumiosplash.service: Failed to execute command: No such file or directory Feb 21 20:42:51 volumio systemd[501]: volumiosplash.service: Failed at step EXEC spawning /bin/volumiosplash.sh: No such file or directory Feb 21 20:42:51 volumio systemd[1]: Started Manage Sound Card State (restore and store). Feb 21 20:42:51 volumio alsactl[518]: alsactl 1.1.8 daemon started Feb 21 20:42:51 volumio systemd[1]: Started Volumio Iptables Module. Feb 21 20:42:51 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:42:51 volumio systemd[1]: Started Volumio Log Rotation Service. Feb 21 20:42:51 volumio systemd[1]: Starting triggerhappy global hotkey daemon... Feb 21 20:42:51 volumio systemd[1]: Starting Save/Restore Sound Card State... Feb 21 20:42:51 volumio systemd[1]: Starting Avahi mDNS/DNS-SD Stack... Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped. Feb 21 20:42:51 volumio systemd[1]: Starting Configure Bluetooth Modems connected by UART... Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Copy user wpa_supplicant.conf being skipped. Feb 21 20:42:51 volumio systemd[1]: Condition check resulted in Volumio SSH enabler being skipped. Feb 21 20:42:51 volumio systemd[1]: Started UPnP Renderer front-end to MPD. Feb 21 20:42:51 volumio systemd[1]: Starting Wireless Services... Feb 21 20:42:51 volumio systemd[1]: Started D-Bus System Message Bus. Feb 21 20:42:51 volumio sh[406]: eth0: waiting for carrier Feb 21 20:42:51 volumio dhcpcd[455]: eth0: waiting for carrier Feb 21 20:42:51 volumio kernel: bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) Feb 21 20:42:51 volumio kernel: bcmgenet fd580000.ethernet eth0: Link is Down Feb 21 20:42:51 volumio systemd[1]: Starting WPA supplicant... Feb 21 20:42:51 volumio systemd[1]: Starting Login Service... Feb 21 20:42:51 volumio systemd[1]: Starting dhcpcd on all interfaces... Feb 21 20:42:51 volumio systemd[1]: Started RPC bind portmap service. Feb 21 20:42:51 volumio systemd[1]: volumiosplash.service: Main process exited, code=exited, status=203/EXEC Feb 21 20:42:51 volumio systemd[1]: volumiosplash.service: Failed with result 'exit-code'. Feb 21 20:42:51 volumio thd[524]: Unable to parse trigger line: Feb 21 20:42:51 volumio thd[524]: Unable to parse trigger line: KEY_MIN_INTERESTING 1 /usr/local/bin/volumio volume toggle Feb 21 20:42:51 volumio thd[524]: Unable to parse trigger line: Feb 21 20:42:51 volumio thd[524]: Found socket passed from systemd Feb 21 20:42:51 volumio systemd[1]: Started triggerhappy global hotkey daemon. Feb 21 20:42:51 volumio systemd[1]: Started Save/Restore Sound Card State. Feb 21 20:42:51 volumio systemd[1]: Reached target Sound Card. Feb 21 20:42:51 volumio systemd[1]: Reached target RPC Port Mapper. Feb 21 20:42:51 volumio systemd[1]: Reached target Remote File Systems (Pre). Feb 21 20:42:51 volumio systemd[1]: Reached target Remote File Systems. Feb 21 20:42:51 volumio systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling... Feb 21 20:42:51 volumio dhcpcd[539]: Not running dhcpcd because /etc/network/interfaces Feb 21 20:42:51 volumio dhcpcd[539]: defines some interfaces that will use a Feb 21 20:42:51 volumio dhcpcd[539]: DHCP client or static address Feb 21 20:42:51 volumio systemd[1]: dhcpcd.service: Control process exited, code=exited, status=6/NOTCONFIGURED Feb 21 20:42:51 volumio systemd[1]: dhcpcd.service: Failed with result 'exit-code'. Feb 21 20:42:51 volumio systemd[1]: Failed to start dhcpcd on all interfaces. Feb 21 20:42:51 volumio avahi-daemon[528]: Found user 'avahi' (UID 110) and group 'avahi' (GID 113). Feb 21 20:42:51 volumio avahi-daemon[528]: Successfully dropped root privileges. Feb 21 20:42:51 volumio avahi-daemon[528]: avahi-daemon 0.7 starting up. Feb 21 20:42:51 volumio sh[405]: wlan0=wlan0 Feb 21 20:42:52 volumio systemd-logind[538]: New seat seat0. Feb 21 20:42:52 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:42:52 volumio volumio-remote-updater[515]: Error: No active session Feb 21 20:42:52 volumio volumio-remote-updater[515]: [2024-02-21 20:42:52] [info] asio async_connect error: system:111 (Connection refused) Feb 21 20:42:52 volumio volumio-remote-updater[515]: [2024-02-21 20:42:52] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Feb 21 20:42:52 volumio volumio-remote-updater[515]: [2024-02-21 20:42:52] [error] handle_connect error: Underlying Transport Error Feb 21 20:42:52 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:52 volumio systemd[1]: hciuart.service: Succeeded. Feb 21 20:42:52 volumio systemd[1]: Started Configure Bluetooth Modems connected by UART. Feb 21 20:42:52 volumio wpa_supplicant[537]: Successfully initialized wpa_supplicant Feb 21 20:42:52 volumio avahi-daemon[528]: Successfully called chroot(). Feb 21 20:42:52 volumio avahi-daemon[528]: Successfully dropped remaining capabilities. Feb 21 20:42:52 volumio volumio[531]: Could not open config: /tmp/upmpdcli.conf Feb 21 20:42:52 volumio avahi-daemon[528]: No service file found in /etc/avahi/services. Feb 21 20:42:52 volumio systemd[1]: upmpdcli.service: Main process exited, code=exited, status=1/FAILURE Feb 21 20:42:52 volumio systemd[1]: upmpdcli.service: Failed with result 'exit-code'. Feb 21 20:42:52 volumio avahi-daemon[528]: Network interface enumeration completed. Feb 21 20:42:52 volumio avahi-daemon[528]: Server startup complete. Host name is volumio.local. Local service cookie is 1269480646. Feb 21 20:42:52 volumio systemd[1]: Started Login Service. Feb 21 20:42:52 volumio systemd[1]: Started WPA supplicant. Feb 21 20:42:52 volumio systemd[1]: Started Avahi mDNS/DNS-SD Stack. Feb 21 20:42:52 volumio kernel: usb 1-1.3: new high-speed USB device number 16 using xhci_hcd Feb 21 20:42:52 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:52 volumio systemd[1]: Starting Raspberry Pi bluetooth helper... Feb 21 20:42:52 volumio systemd[1]: Started Raise network interfaces. Feb 21 20:42:52 volumio systemd[1]: Reached target Network. Feb 21 20:42:52 volumio systemd[1]: Reached target Network is Online. Feb 21 20:42:52 volumio systemd[1]: Starting LSB: Brings up/down network automatically... Feb 21 20:42:52 volumio systemd[1]: Started Shairport Sync - AirPlay Audio Receiver. Feb 21 20:42:53 volumio systemd[1]: Starting Permit User Sessions... Feb 21 20:42:53 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:53 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:53 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:53 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:53 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:53 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:53 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:53 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:53 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:53 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:53 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:53 volumio kernel: usb 1-1.3: USB disconnect, device number 16 Feb 21 20:42:53 volumio systemd[1]: Starting Samba NMB Daemon... Feb 21 20:42:53 volumio bthelper[595]: Raspberry Pi BDADDR already set Feb 21 20:42:53 volumio systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped. Feb 21 20:42:53 volumio systemd[1]: Starting /etc/rc.local Compatibility... Feb 21 20:42:53 volumio systemd[1]: Starting Network Time Service... Feb 21 20:42:53 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:42:53 volumio systemd[1]: Started Raspberry Pi bluetooth helper. Feb 21 20:42:53 volumio systemd[1]: Started Permit User Sessions. Feb 21 20:42:53 volumio systemd[1]: Started /etc/rc.local Compatibility. Feb 21 20:42:53 volumio systemd[1]: iptables.service: Succeeded. Feb 21 20:42:53 volumio kernel: usb 1-1.3: new high-speed USB device number 17 using xhci_hcd Feb 21 20:42:53 volumio loadcpufreq[546]: Loading cpufreq kernel modules...done (none). Feb 21 20:42:53 volumio systemd[1]: Starting Hold until boot process finishes up... Feb 21 20:42:53 volumio systemd[1]: Starting Terminate Plymouth Boot Screen... Feb 21 20:42:53 volumio systemd[1]: Starting Bluetooth service... Feb 21 20:42:53 volumio systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling. Feb 21 20:42:53 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:53 volumio systemd[1]: Received SIGRTMIN+21 from PID 268 (plymouthd). Feb 21 20:42:53 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:53 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:53 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:53 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:53 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:53 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:53 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:53 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:53 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:53 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:53 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:53 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:53 volumio kernel: usb 1-1.3: USB disconnect, device number 17 Feb 21 20:42:53 volumio systemd[1]: plymouth-start.service: Succeeded. Feb 21 20:42:53 volumio systemd[1]: plymouth-quit-wait.service: Succeeded. Feb 21 20:42:53 volumio systemd[1]: Started Hold until boot process finishes up. Feb 21 20:42:53 volumio systemd[1]: plymouth-quit.service: Succeeded. Feb 21 20:42:53 volumio systemd[1]: Started Terminate Plymouth Boot Screen. Feb 21 20:42:53 volumio systemd[1]: Received SIGRTMIN+21 from PID 268 (n/a). Feb 21 20:42:53 volumio systemd[1]: Started Getty on tty1. Feb 21 20:42:53 volumio systemd[1]: Reached target Login Prompts. Feb 21 20:42:53 volumio systemd[1]: Starting LSB: set CPUFreq kernel parameters... Feb 21 20:42:53 volumio ifplugd(eth0)[672]: ifplugd 0.28 initializing. Feb 21 20:42:53 volumio ifplugd(eth0)[672]: Using interface eth0/DC:A6:32:A1:DF:3D with driver (version: 6.1.69-v7l+) Feb 21 20:42:53 volumio ifplugd(eth0)[672]: Using detection mode: SIOCETHTOOL Feb 21 20:42:53 volumio ifplugd(eth0)[672]: Initialization complete, link beat not detected. Feb 21 20:42:53 volumio ntpd[620]: ntpd 4.2.8p12@1.3728-o (1): Starting Feb 21 20:42:53 volumio ntpd[620]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 103:103 Feb 21 20:42:53 volumio systemd[1]: Started Network Time Service. Feb 21 20:42:53 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:53 volumio ntpd[674]: proto: precision = 2.074 usec (-19) Feb 21 20:42:53 volumio ntpd[674]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature Feb 21 20:42:53 volumio ntpd[674]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2024-06-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37 Feb 21 20:42:53 volumio ntpd[674]: Listen and drop on 0 v6wildcard [::]:123 Feb 21 20:42:53 volumio ntpd[674]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Feb 21 20:42:53 volumio ntpd[674]: Listen normally on 2 lo 127.0.0.1:123 Feb 21 20:42:53 volumio ntpd[674]: Listening on routing socket on fd #19 for interface updates Feb 21 20:42:53 volumio ntpd[674]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Feb 21 20:42:53 volumio ntpd[674]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized Feb 21 20:42:53 volumio ifplugd[601]: Network Interface Plugging Daemon...start eth0...done. Feb 21 20:42:53 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:42:53 volumio bluetoothd[653]: Bluetooth daemon 5.50 Feb 21 20:42:53 volumio bluetoothd[653]: Unknown key AutoConnectTimeout for group General in /etc/bluetooth/main.conf Feb 21 20:42:53 volumio systemd[1]: Started LSB: Brings up/down network automatically. Feb 21 20:42:53 volumio systemd[1]: Started Bluetooth service. Feb 21 20:42:53 volumio kernel: usb 1-1.3: new high-speed USB device number 18 using xhci_hcd Feb 21 20:42:53 volumio bluetoothd[653]: Starting SDP server Feb 21 20:42:53 volumio bluetoothd[653]: Excluding (cli) sap Feb 21 20:42:53 volumio systemd[1]: Reached target Bluetooth. Feb 21 20:42:53 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:54 volumio kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Feb 21 20:42:54 volumio kernel: Bluetooth: BNEP filters: protocol multicast Feb 21 20:42:54 volumio kernel: Bluetooth: BNEP socket layer initialized Feb 21 20:42:54 volumio bluetoothd[653]: Bluetooth management interface 1.22 initialized Feb 21 20:42:54 volumio dbus-daemon[533]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.5' (uid=0 pid=653 comm="/usr/lib/bluetooth/bluetoothd --noplugin=sap ") Feb 21 20:42:54 volumio kernel: Bluetooth: MGMT ver 1.22 Feb 21 20:42:54 volumio cpufrequtils[670]: CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...CPU2...CPU3...done. Feb 21 20:42:54 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:54 volumio systemd[1]: Started LSB: set CPUFreq kernel parameters. Feb 21 20:42:54 volumio bluetoothd[653]: Failed to set privacy: Rejected (0x0b) Feb 21 20:42:54 volumio systemd[1]: Starting Hostname Service... Feb 21 20:42:54 volumio dbus-daemon[533]: [system] Successfully activated service 'org.freedesktop.hostname1' Feb 21 20:42:54 volumio systemd[1]: Started Hostname Service. Feb 21 20:42:54 volumio nmbd[632]: [2024/02/21 20:42:54.451003, 0] ../source3/nmbd/asyncdns.c:158(start_async_dns) Feb 21 20:42:54 volumio nmbd[632]: started asyncdns process 696 Feb 21 20:42:54 volumio nmbd[632]: [2024/02/21 20:42:54.453113, 0] ../lib/util/become_daemon.c:149(daemon_status) Feb 21 20:42:54 volumio nmbd[632]: daemon_status: STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ... Feb 21 20:42:54 volumio nmbd[632]: [2024/02/21 20:42:54.453267, 0] ../source3/nmbd/nmbd_subnetdb.c:254(create_subnets) Feb 21 20:42:54 volumio nmbd[632]: NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6). Feb 21 20:42:54 volumio haveged[460]: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 8.2.0 CTV); collect: 128K Feb 21 20:42:54 volumio haveged[460]: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 14768/63488 Feb 21 20:42:54 volumio haveged[460]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 7.99959 Feb 21 20:42:54 volumio haveged[460]: haveged: fills: 0, generated: 0 Feb 21 20:42:54 volumio wireless.js[532]: Cleaning previous... Feb 21 20:42:54 volumio ntpd[674]: error resolving pool 0.debian.pool.ntp.org: System error (-11) Feb 21 20:42:54 volumio sudo[704]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Feb 21 20:42:54 volumio sudo[704]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:54 volumio sudo[704]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:54 volumio sudo[706]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Feb 21 20:42:54 volumio sudo[706]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:54 volumio kernel: usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? Feb 21 20:42:54 volumio kernel: usb 1-1.3: new high-speed USB device number 19 using xhci_hcd Feb 21 20:42:55 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:55 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:55 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:55 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:55 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:55 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:55 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:55 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:55 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:55 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:55 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:55 volumio kernel: usb 1-1.3: USB disconnect, device number 19 Feb 21 20:42:55 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:42:55 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:55 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:55 volumio sudo[706]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:55 volumio wireless.js[532]: Stopped aP Feb 21 20:42:55 volumio kernel: usb 1-1.3: new high-speed USB device number 20 using xhci_hcd Feb 21 20:42:55 volumio sudo[718]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Feb 21 20:42:55 volumio sudo[718]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:55 volumio sudo[718]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:55 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Feb 21 20:42:55 volumio sudo[720]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg get Feb 21 20:42:55 volumio sudo[720]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:55 volumio sudo[720]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:55 volumio sudo[727]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Feb 21 20:42:55 volumio sudo[727]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:55 volumio sudo[727]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:55 volumio sudo[729]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw wlan0 scan Feb 21 20:42:55 volumio sudo[729]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:55 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:55 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:55 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:55 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:55 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:55 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:55 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:55 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:55 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:55 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:55 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:55 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:55 volumio kernel: usb 1-1.3: USB disconnect, device number 20 Feb 21 20:42:55 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:42:55 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:55 volumio systemd[1]: systemd-rfkill.service: Succeeded. Feb 21 20:42:55 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:55 volumio ntpd[674]: error resolving pool 1.debian.pool.ntp.org: System error (-11) Feb 21 20:42:56 volumio kernel: usb 1-1.3: new high-speed USB device number 21 using xhci_hcd Feb 21 20:42:56 volumio ntpd[674]: error resolving pool 2.debian.pool.ntp.org: System error (-11) Feb 21 20:42:57 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:57 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:57 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:57 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:57 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:57 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:57 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:57 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:57 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:57 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:57 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: USB disconnect, device number 21 Feb 21 20:42:57 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:42:57 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:57 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:57 volumio kernel: usb 1-1.3: new high-speed USB device number 22 using xhci_hcd Feb 21 20:42:57 volumio volumio-remote-updater[515]: [2024-02-21 20:42:57] [info] asio async_connect error: system:111 (Connection refused) Feb 21 20:42:57 volumio volumio-remote-updater[515]: [2024-02-21 20:42:57] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Feb 21 20:42:57 volumio volumio-remote-updater[515]: [2024-02-21 20:42:57] [error] handle_connect error: Underlying Transport Error Feb 21 20:42:57 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:57 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:57 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:57 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:57 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:57 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:57 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:57 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:57 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:57 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:57 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:57 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:42:57 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:57 volumio kernel: usb 1-1.3: USB disconnect, device number 22 Feb 21 20:42:57 volumio ntpd[674]: error resolving pool 3.debian.pool.ntp.org: System error (-11) Feb 21 20:42:57 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:58 volumio kernel: usb 1-1.3: new high-speed USB device number 23 using xhci_hcd Feb 21 20:42:58 volumio sudo[729]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:58 volumio wireless.js[532]: SETTING APPROPRIATE REG DOMAIN: DE Feb 21 20:42:58 volumio sudo[749]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 up Feb 21 20:42:58 volumio sudo[749]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:58 volumio sudo[749]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:58 volumio sudo[751]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iw reg set DE Feb 21 20:42:58 volumio sudo[751]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:58 volumio sudo[751]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:58 volumio wireless.js[532]: SUCCESSFULLY SET NEW REGDOMAIN: DE Feb 21 20:42:58 volumio wireless.js[532]: Start wireless flow Feb 21 20:42:58 volumio wireless.js[532]: Stopped hotspot (if there).. Feb 21 20:42:58 volumio bthelper[595]: Changing power off succeeded Feb 21 20:42:58 volumio sudo[757]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ip addr flush dev wlan0 Feb 21 20:42:58 volumio sudo[757]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:58 volumio sudo[757]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:58 volumio sudo[759]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 down Feb 21 20:42:58 volumio sudo[759]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:58 volumio bthelper[595]: [CHG] Controller DC:A6:32:A1:DF:42 Class: 0x0000041c Feb 21 20:42:58 volumio bthelper[595]: Changing power on succeeded Feb 21 20:42:58 volumio sudo[759]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:58 volumio wireless.js[532]: DHCP IP Feb 21 20:42:58 volumio wireless.js[532]: Start ap Feb 21 20:42:58 volumio wpa_supplicant[766]: Successfully initialized wpa_supplicant Feb 21 20:42:58 volumio sudo[767]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/dhcpcd Feb 21 20:42:58 volumio sudo[767]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:58 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Feb 21 20:42:58 volumio dhcpcd[768]: dev: loaded udev Feb 21 20:42:58 volumio dhcpcd-run-hooks[786]: wlan0: starting wpa_supplicant Feb 21 20:42:59 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:42:59 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:42:59 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:42:59 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:42:59 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:59 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:59 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:59 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:59 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:59 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:59 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:42:59 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:42:59 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:42:59 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:42:59 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:42:59 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:42:59 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:42:59 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:59 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:42:59 volumio kernel: usb 1-1.3: USB disconnect, device number 23 Feb 21 20:42:59 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:42:59 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:42:59 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:42:59 volumio dhcpcd-run-hooks[796]: wlan0: failed to start wpa_supplicant Feb 21 20:42:59 volumio dhcpcd-run-hooks[797]: wlan0: Successfully initialized wpa_supplicant nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Match already configured nl80211: kernel reports: Ma Feb 21 20:42:59 volumio dhcpcd[768]: wlan0: connected to Access Point `' Feb 21 20:42:59 volumio dhcpcd[768]: no interfaces have a carrier Feb 21 20:42:59 volumio dhcpcd[768]: forked to background, child pid 807 Feb 21 20:42:59 volumio dhcpcd[807]: eth0: waiting for carrier Feb 21 20:42:59 volumio dhcpcd[807]: wlan0: waiting for carrier Feb 21 20:42:59 volumio sudo[767]: pam_unix(sudo:session): session closed for user root Feb 21 20:42:59 volumio kernel: usb 1-1.3: new high-speed USB device number 24 using xhci_hcd Feb 21 20:42:59 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:42:59 volumio wireless.js[532]: trying... Feb 21 20:42:59 volumio sudo[809]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:42:59 volumio sudo[809]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:42:59 volumio sudo[809]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:00 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:43:00 volumio wireless.js[532]: trying... Feb 21 20:43:00 volumio sudo[812]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:00 volumio sudo[812]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:00 volumio sudo[812]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:01 volumio kernel: usb 1-1.3: new high-speed USB device number 25 using xhci_hcd Feb 21 20:43:01 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:01 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:01 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:01 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:01 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:01 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:01 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:01 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:01 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:01 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:01 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:01 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:01 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:01 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:01 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:01 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:01 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:01 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:01 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:01 volumio kernel: usb 1-1.3: USB disconnect, device number 25 Feb 21 20:43:01 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:01 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:43:01 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:43:01 volumio wpa_supplicant[790]: wlan0: Trying to associate with SSID 'skyAP' Feb 21 20:43:01 volumio kernel: usb 1-1.3: new high-speed USB device number 26 using xhci_hcd Feb 21 20:43:01 volumio wireless.js[532]: trying... Feb 21 20:43:01 volumio sudo[820]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:01 volumio sudo[820]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:01 volumio sudo[820]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:02 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:02 volumio wireless.js[532]: trying... Feb 21 20:43:02 volumio sudo[823]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:02 volumio sudo[823]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:02 volumio sudo[823]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:02 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:03 volumio kernel: usb 1-1.3: device not accepting address 26, error -71 Feb 21 20:43:03 volumio wireless.js[532]: trying... Feb 21 20:43:03 volumio sudo[826]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:03 volumio sudo[826]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:03 volumio sudo[826]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:03 volumio kernel: usb 1-1.3: new high-speed USB device number 27 using xhci_hcd Feb 21 20:43:04 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:04 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: carrier acquired Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: connected to Access Point `skyAP' Feb 21 20:43:04 volumio wpa_supplicant[790]: wlan0: Associated with a8:42:a1:3c:88:2f Feb 21 20:43:04 volumio wpa_supplicant[790]: wlan0: CTRL-EVENT-CONNECTED - Connection to a8:42:a1:3c:88:2f completed [id=0 id_str=] Feb 21 20:43:04 volumio wpa_supplicant[790]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 Feb 21 20:43:04 volumio wpa_supplicant[790]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=DE Feb 21 20:43:04 volumio dhcpcd[807]: DUID 00:01:00:01:2d:69:1c:d0:dc:a6:32:a1:df:3d Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: IAID 32:a1:df:3f Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: adding address fe80::4780:375c:5463:2de4 Feb 21 20:43:04 volumio dhcpcd[807]: ipv6_addaddr1: Permission denied Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: carrier lost Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: carrier acquired Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: IAID 32:a1:df:3f Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: rebinding lease of 192.168.1.5 Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: probing address 192.168.1.5/24 Feb 21 20:43:04 volumio dhcpcd[807]: wlan0: soliciting an IPv6 router Feb 21 20:43:04 volumio kernel: usb 1-1.3: device not accepting address 27, error -71 Feb 21 20:43:04 volumio kernel: usb 1-1-port3: attempt power cycle Feb 21 20:43:04 volumio wireless.js[532]: trying... Feb 21 20:43:04 volumio sudo[841]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:04 volumio sudo[841]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:04 volumio sudo[841]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:04 volumio volumio-remote-updater[515]: [2024-02-21 20:43:04] [info] asio async_connect error: system:111 (Connection refused) Feb 21 20:43:04 volumio volumio-remote-updater[515]: [2024-02-21 20:43:04] [info] Error getting remote endpoint: system:107 (Transport endpoint is not connected) Feb 21 20:43:04 volumio volumio-remote-updater[515]: [2024-02-21 20:43:04] [error] handle_connect error: Underlying Transport Error Feb 21 20:43:05 volumio kernel: usb 1-1.3: new high-speed USB device number 28 using xhci_hcd Feb 21 20:43:05 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:05 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:05 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:05 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:05 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:05 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:05 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:05 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:05 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:05 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:05 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:05 volumio kernel: usb 1-1.3: USB disconnect, device number 28 Feb 21 20:43:05 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:05 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:43:05 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:43:05 volumio kernel: usb 1-1.3: new high-speed USB device number 29 using xhci_hcd Feb 21 20:43:05 volumio wireless.js[532]: trying... Feb 21 20:43:05 volumio sudo[849]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:05 volumio sudo[849]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:05 volumio sudo[849]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:05 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:05 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:05 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:05 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:05 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:05 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:05 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:05 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:05 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:05 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:05 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:05 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:05 volumio kernel: usb 1-1.3: USB disconnect, device number 29 Feb 21 20:43:05 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:05 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:43:06 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:43:06 volumio kernel: usb 1-1.3: new high-speed USB device number 30 using xhci_hcd Feb 21 20:43:06 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:06 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:06 volumio kernel: usb 1-1.3: device not accepting address 30, error -71 Feb 21 20:43:06 volumio wireless.js[532]: trying... Feb 21 20:43:06 volumio sudo[857]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:06 volumio sudo[857]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:06 volumio sudo[857]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:07 volumio kernel: usb 1-1.3: new high-speed USB device number 31 using xhci_hcd Feb 21 20:43:07 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:07 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:07 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:07 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:07 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:07 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:07 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:07 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:07 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:07 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:07 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: USB disconnect, device number 31 Feb 21 20:43:07 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:07 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:43:07 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:43:07 volumio kernel: usb 1-1.3: new high-speed USB device number 32 using xhci_hcd Feb 21 20:43:07 volumio wireless.js[532]: trying... Feb 21 20:43:07 volumio sudo[865]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:07 volumio sudo[865]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:07 volumio sudo[865]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:07 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:07 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:07 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:07 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:07 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:07 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:07 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:07 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:07 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:07 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:07 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:07 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:43:07 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:43:07 volumio kernel: usb 1-1.3: USB disconnect, device number 32 Feb 21 20:43:08 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:43:08 volumio kernel: usb 1-1.3: new high-speed USB device number 33 using xhci_hcd Feb 21 20:43:08 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:08 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:08 volumio kernel: usb 1-1.3: device not accepting address 33, error -71 Feb 21 20:43:08 volumio wireless.js[532]: trying... Feb 21 20:43:08 volumio sudo[873]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:08 volumio sudo[873]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:08 volumio sudo[873]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:09 volumio dhcpcd[807]: wlan0: leased 192.168.1.5 for infinity Feb 21 20:43:09 volumio avahi-daemon[528]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.5. Feb 21 20:43:09 volumio dhcpcd[807]: wlan0: adding route to 192.168.1.0/24 Feb 21 20:43:09 volumio avahi-daemon[528]: New relevant interface wlan0.IPv4 for mDNS. Feb 21 20:43:09 volumio dhcpcd[807]: wlan0: adding default route via 192.168.1.1 Feb 21 20:43:09 volumio avahi-daemon[528]: Registering new address record for 192.168.1.5 on wlan0.IPv4. Feb 21 20:43:09 volumio kernel: usb 1-1.3: new high-speed USB device number 34 using xhci_hcd Feb 21 20:43:09 volumio nmbd[632]: [2024/02/21 20:43:09.464296, 0] ../lib/util/become_daemon.c:138(daemon_ready) Feb 21 20:43:09 volumio systemd[1]: Started Samba NMB Daemon. Feb 21 20:43:09 volumio nmbd[632]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections Feb 21 20:43:09 volumio nmbd[632]: [2024/02/21 20:43:09.485063, 0] ../source3/nmbd/nmbd_namequery.c:109(query_name_response) Feb 21 20:43:09 volumio nmbd[632]: query_name_response: Multiple (2) responses received for a query on subnet 192.168.1.5 for name WORKGROUP<1d>. Feb 21 20:43:09 volumio nmbd[632]: This response was from IP 192.168.1.176, reporting an IP address of 192.168.1.176. Feb 21 20:43:09 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:09 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:09 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:09 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:09 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:09 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:09 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:09 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:09 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:09 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:09 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:09 volumio systemd[1]: Starting Samba Winbind Daemon... Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:09 volumio kernel: usb 1-1.3: USB disconnect, device number 34 Feb 21 20:43:09 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:09 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:43:09 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:43:09 volumio winbindd[896]: [2024/02/21 20:43:09.724180, 0] ../source3/winbindd/winbindd_cache.c:3160(initialize_winbindd_cache) Feb 21 20:43:09 volumio winbindd[896]: initialize_winbindd_cache: clearing cache and re-creating with version number 2 Feb 21 20:43:09 volumio winbindd[896]: [2024/02/21 20:43:09.738895, 0] ../lib/util/become_daemon.c:138(daemon_ready) Feb 21 20:43:09 volumio systemd[1]: Started Samba Winbind Daemon. Feb 21 20:43:09 volumio winbindd[896]: daemon_ready: STATUS=daemon 'winbindd' finished starting up and ready to serve connections Feb 21 20:43:09 volumio systemd[1]: Starting Samba SMB Daemon... Feb 21 20:43:09 volumio kernel: usb 1-1.3: new high-speed USB device number 35 using xhci_hcd Feb 21 20:43:09 volumio wireless.js[532]: trying... Feb 21 20:43:09 volumio sudo[908]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwgetid -r Feb 21 20:43:09 volumio sudo[908]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:09 volumio sudo[908]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:09 volumio wireless.js[532]: Connected to: ----skyAP Feb 21 20:43:09 volumio wireless.js[532]: ---- Feb 21 20:43:09 volumio sudo[911]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Feb 21 20:43:09 volumio sudo[911]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:09 volumio sudo[911]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:09 volumio wireless.js[532]: ... joined AP, wlan0 IPv4 is 192.168.1.5, ipV6 is undefined Feb 21 20:43:09 volumio wireless.js[532]: It's done! AP Feb 21 20:43:09 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:09 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:09 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:09 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:09 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:09 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:09 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:09 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:09 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:09 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:09 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:09 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:09 volumio kernel: brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled Feb 21 20:43:10 volumio systemd[1]: Started Wireless Services. Feb 21 20:43:10 volumio systemd[1]: Started Volumio Backend Module. Feb 21 20:43:10 volumio systemd[1]: Started Volumio Cpu Tweaker. Feb 21 20:43:10 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:10 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:10 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:10 volumio kernel: usb 1-1.3: USB disconnect, device number 35 Feb 21 20:43:10 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:43:10 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:10 volumio systemd-udevd[261]: Process '/bin/bash -c '/usr/local/bin/volumio usbattach'' failed with exit code 7. Feb 21 20:43:10 volumio volumio-cpu-tweak[920]: Setting RT Priority for mpd Feb 21 20:43:10 volumio volumio-cpu-tweak[920]: pid 35's current scheduling policy: SCHED_OTHER Feb 21 20:43:10 volumio volumio-cpu-tweak[920]: pid 35's current scheduling priority: 0 Feb 21 20:43:10 volumio volumio-cpu-tweak[920]: Setting MPD Affinity Feb 21 20:43:10 volumio volumio-cpu-tweak[920]: pid 3's current affinity mask: f Feb 21 20:43:10 volumio systemd-udevd[237]: Process '/bin/bash -c '/usr/local/bin/volumio usbdetach'' failed with exit code 7. Feb 21 20:43:10 volumio volumio-cpu-tweak[920]: /bin/volumio_cpu_tweak: line 27: warning: command substitution: ignored null byte in input Feb 21 20:43:10 volumio volumio-cpu-tweak[920]: VOLUMIO CPU TWEAK: Setting CPU Governor: performance Feb 21 20:43:10 volumio systemd[1]: volumio_cpu_tweak.service: Succeeded. Feb 21 20:43:10 volumio systemd[1]: Started Samba SMB Daemon. Feb 21 20:43:10 volumio systemd[1]: Reached target Multi-User System. Feb 21 20:43:10 volumio systemd[1]: Reached target Graphical Interface. Feb 21 20:43:10 volumio smbd[906]: [2024/02/21 20:43:10.189486, 0] ../lib/util/become_daemon.c:138(daemon_ready) Feb 21 20:43:10 volumio smbd[906]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections Feb 21 20:43:10 volumio systemd[1]: Starting Update UTMP about System Runlevel Changes... Feb 21 20:43:10 volumio systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. Feb 21 20:43:10 volumio systemd[1]: Started Update UTMP about System Runlevel Changes. Feb 21 20:43:10 volumio systemd[1]: Startup finished in 9.047s (kernel) + 24.973s (userspace) = 34.020s. Feb 21 20:43:10 volumio kernel: usb 1-1.3: new high-speed USB device number 36 using xhci_hcd Feb 21 20:43:10 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:10 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:10 volumio ntpd[674]: Listen normally on 3 wlan0 192.168.1.5:123 Feb 21 20:43:10 volumio ntpd[674]: new interface(s) found: waking up resolver Feb 21 20:43:10 volumio kernel: usb 1-1.3: device not accepting address 36, error -71 Feb 21 20:43:11 volumio kernel: usb 1-1.3: new high-speed USB device number 37 using xhci_hcd Feb 21 20:43:11 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:11 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:11 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:11 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:11 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:11 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:11 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:11 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:11 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:11 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:11 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:11 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:11 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:11 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:11 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:11 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:11 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:11 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:11 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:11 volumio kernel: usb 1-1.3: USB disconnect, device number 37 Feb 21 20:43:11 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:11 volumio volumio[918]: info: ------------------------------------------- Feb 21 20:43:11 volumio volumio[918]: info: ----- Volumio3 ---- Feb 21 20:43:11 volumio volumio[918]: info: ------------------------------------------- Feb 21 20:43:11 volumio volumio[918]: info: ----- System startup ---- Feb 21 20:43:11 volumio volumio[918]: info: ------------------------------------------- Feb 21 20:43:11 volumio kernel: usb 1-1.3: new high-speed USB device number 38 using xhci_hcd Feb 21 20:43:12 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:12 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:12 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:12 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:12 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:12 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:12 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:12 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:12 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:12 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:12 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:12 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:12 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:12 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:12 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:12 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:12 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:12 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:12 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:12 volumio kernel: usb 1-1.3: USB disconnect, device number 38 Feb 21 20:43:12 volumio kernel: usb 1-1.3: new high-speed USB device number 39 using xhci_hcd Feb 21 20:43:12 volumio volumio[918]: info: MYVOLUMIO Environment detected Feb 21 20:43:12 volumio volumio[918]: info: Plugin folders cleanup Feb 21 20:43:12 volumio volumio[918]: info: Scanning into folder /volumio/app/plugins/ Feb 21 20:43:12 volumio volumio[918]: info: Scanning category audio_interface Feb 21 20:43:12 volumio volumio[918]: info: Scanning category miscellanea Feb 21 20:43:12 volumio volumio[918]: info: Scanning category music_service Feb 21 20:43:12 volumio volumio[918]: info: Scanning category plugins.json Feb 21 20:43:12 volumio volumio[918]: info: Scanning category system_controller Feb 21 20:43:12 volumio volumio[918]: info: Scanning category user_interface Feb 21 20:43:12 volumio volumio[918]: info: Scanning into folder /data/plugins/ Feb 21 20:43:12 volumio volumio[918]: info: Plugin folders cleanup completed Feb 21 20:43:12 volumio volumio[918]: info: ------------------------------------------- Feb 21 20:43:12 volumio volumio[918]: info: ----- Core plugins startup ---- Feb 21 20:43:12 volumio volumio[918]: info: ------------------------------------------- Feb 21 20:43:12 volumio volumio[918]: info: Loading plugins from folder /volumio/app/plugins/ Feb 21 20:43:12 volumio volumio[918]: info: Adding plugin upnp to MyMusic Plugins Feb 21 20:43:12 volumio volumio[918]: info: Adding plugin airplay_emulation to MyMusic Plugins Feb 21 20:43:12 volumio volumio[918]: info: Adding plugin upnp_browser to MyMusic Plugins Feb 21 20:43:12 volumio volumio[918]: info: Loading plugins from folder /data/plugins/ Feb 21 20:43:12 volumio volumio[918]: info: Loading plugin "system"... Feb 21 20:43:12 volumio volumio[918]: info: Loading plugin "appearance"... Feb 21 20:43:12 volumio kernel: usb 1-1.3: device descriptor read/all, error -71 Feb 21 20:43:13 volumio kernel: usb 1-1.3: new high-speed USB device number 40 using xhci_hcd Feb 21 20:43:13 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:13 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:13 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:13 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:13 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:13 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:13 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:13 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:13 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:13 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:13 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:13 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:13 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:13 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:13 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:13 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:13 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:13 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:13 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:13 volumio kernel: usb 1-1.3: USB disconnect, device number 40 Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "network"... Feb 21 20:43:13 volumio volumio[918]: info: Refreshing Cached IP Addresses Feb 21 20:43:13 volumio sudo[963]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Feb 21 20:43:13 volumio sudo[963]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:13 volumio sudo[963]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "services"... Feb 21 20:43:13 volumio sudo[965]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Feb 21 20:43:13 volumio sudo[965]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "alsa_controller"... Feb 21 20:43:13 volumio sudo[965]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:13 volumio sudo[968]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/iwlist wlan0 scan Feb 21 20:43:13 volumio sudo[968]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:13 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getSystemVersion Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "wizard"... Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "networkfs"... Feb 21 20:43:13 volumio kernel: usb 1-1.3: new high-speed USB device number 41 using xhci_hcd Feb 21 20:43:13 volumio volumio[918]: info: Starting Udev Watcher for removable devices Feb 21 20:43:13 volumio sudo[976]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mount -t cifs -o username=sky,password=XR+6271-pioeq,ro,dir_mode=0777,file_mode=0666,iocharset=utf8,noauto,soft //192.168.1.198/NAS-DATA/Audio /mnt/NAS/NAS-Audio Feb 21 20:43:13 volumio sudo[976]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:13 volumio volumio[918]: info: Ignoring mount for partition: boot Feb 21 20:43:13 volumio volumio[918]: info: Ignoring mount for partition: volumio Feb 21 20:43:13 volumio volumio[918]: info: Ignoring mount for partition: volumio_data Feb 21 20:43:13 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "volumio_command_line_client"... Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "upnp"... Feb 21 20:43:13 volumio volumio[918]: info: [1708548193865] Starting Upmpd Daemon Feb 21 20:43:13 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "my_music"... Feb 21 20:43:13 volumio volumio[918]: info: Loading plugin "mpd"... Feb 21 20:43:13 volumio kernel: Key type cifs.spnego registered Feb 21 20:43:13 volumio kernel: Key type cifs.idmap registered Feb 21 20:43:13 volumio kernel: CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount. Feb 21 20:43:13 volumio kernel: CIFS: Attempting to mount \\192.168.1.198\NAS-DATA Feb 21 20:43:14 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "upnp_browser"... Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "alarm-clock"... Feb 21 20:43:14 volumio sudo[976]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "airplay_emulation"... Feb 21 20:43:14 volumio volumio[918]: info: Starting Shairport Sync Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "last_100"... Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "webradio"... Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "i2s_dacs"... Feb 21 20:43:14 volumio volumio[918]: info: I2S DAC not set, start Auto-detection Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "volumiodiscovery"... Feb 21 20:43:14 volumio volumio[918]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Feb 21 20:43:14 volumio node[918]: *** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi. Feb 21 20:43:14 volumio volumio[918]: *** WARNING *** Please fix your application to use the native API of Avahi! Feb 21 20:43:14 volumio node[918]: *** WARNING *** Please fix your application to use the native API of Avahi! Feb 21 20:43:14 volumio volumio[918]: *** WARNING *** For more information see Feb 21 20:43:14 volumio node[918]: *** WARNING *** For more information see Feb 21 20:43:14 volumio volumio[918]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Feb 21 20:43:14 volumio node[918]: *** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi. Feb 21 20:43:14 volumio volumio[918]: *** WARNING *** Please fix your application to use the native API of Avahi! Feb 21 20:43:14 volumio node[918]: *** WARNING *** Please fix your application to use the native API of Avahi! Feb 21 20:43:14 volumio volumio[918]: *** WARNING *** For more information see Feb 21 20:43:14 volumio node[918]: *** WARNING *** For more information see Feb 21 20:43:14 volumio volumio[918]: info: Applying required configuration parameters for plugin volumiodiscovery Feb 21 20:43:14 volumio volumio[918]: info: Discovery: Started advertising with name: Volumio Feb 21 20:43:14 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , registerCallback Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "outputs"... Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "albumart"... Feb 21 20:43:14 volumio volumio[918]: info: Plugin example_plugin is not enabled Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "inputs"... Feb 21 20:43:14 volumio volumio[918]: info: Loading plugin "updater_comm"... Feb 21 20:43:14 volumio volumio-remote-updater[515]: [2024-02-21 20:43:14] [connect] Successful connection Feb 21 20:43:15 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:15 volumio volumio[918]: info: Plugin mpdemulation is not enabled Feb 21 20:43:15 volumio volumio[918]: info: Loading plugin "rest_api"... Feb 21 20:43:15 volumio volumio[918]: info: Loading plugin "websocket"... Feb 21 20:43:15 volumio volumio[918]: info: Loading i18n strings for locale en Feb 21 20:43:15 volumio volumio[918]: Updating browse sources language Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Feb 21 20:43:15 volumio volumio[918]: Forking 3 albumart workers Feb 21 20:43:15 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::initPlayerControls Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , getConfigParam Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: mpd , getConfigParam Feb 21 20:43:15 volumio volumio[918]: Express server listening on port 3000 Feb 21 20:43:15 volumio volumio[918]: [Metrics] WebUI: 4s 138.92ms Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::resetVolumioState Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::getcurrentVolume Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::volumioRetrievevolume Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getConfigParam Feb 21 20:43:15 volumio kernel: usb 1-1.3: device not accepting address 41, error -71 Feb 21 20:43:15 volumio volumio[918]: verbose: New Socket.io Connection to 192.168.1.5 from 192.168.1.14 UA: okhttp/4.9.2 Total Clients: 1 Feb 21 20:43:15 volumio volumio-remote-updater[515]: [2024-02-21 20:43:15] [connect] WebSocket Connection 127.0.0.1:3000 v-2 "WebSocket++/0.8.2" /socket.io/?EIO=4&transport=websocket&t=1708548194 101 Feb 21 20:43:15 volumio volumio[918]: verbose: New Socket.io Connection to 127.0.0.1:3000 from 127.0.0.1 UA: WebSocket++/0.8.2 Total Clients: 2 Feb 21 20:43:15 volumio volumio[918]: info: Feb 21 20:43:15 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:15 volumio volumio[918]: info: Reloading queue from file Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::setRepeat null single undefined Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::pushState Feb 21 20:43:15 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::volumioPushState Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::setRandom null Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::pushState Feb 21 20:43:15 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::volumioPushState Feb 21 20:43:15 volumio volumio[918]: info: Setting Device type: Raspberry PI Feb 21 20:43:15 volumio volumio[918]: info: VolumeController:: Volume=59 Mute =false Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::pushState Feb 21 20:43:15 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , saveDeviceInfo Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::volumioPushState Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::updateTrackBlock Feb 21 20:43:15 volumio volumio[918]: info: CorePlayQueue::getTrackBlock Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::volumioRetrievevolume Feb 21 20:43:15 volumio volumio[918]: Starting albumart workers Feb 21 20:43:15 volumio volumio[918]: info: Feb 21 20:43:15 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:15 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:15 volumio volumio[918]: Starting albumart workers Feb 21 20:43:15 volumio volumio[918]: info: Discovery: adding 7b981c16-9e03-4874-82dd-d3ce4a499f6c Feb 21 20:43:15 volumio volumio[918]: info: Discovery: Found device Volumio Feb 21 20:43:15 volumio volumio[918]: Starting albumart workers Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:15 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:15 volumio kernel: usb 1-1.3: new high-speed USB device number 42 using xhci_hcd Feb 21 20:43:15 volumio volumio[918]: info: VolumeController:: Volume=59 Mute =false Feb 21 20:43:15 volumio volumio[918]: info: CoreStateMachine::pushState Feb 21 20:43:15 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::volumioPushState Feb 21 20:43:15 volumio volumio[918]: info: Feb 21 20:43:15 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:15 volumio volumio[918]: info: Feb 21 20:43:15 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:15 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:15 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:16 volumio volumio[918]: info: Feb 21 20:43:16 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:16 volumio volumio[918]: verbose: New Socket.io Connection to 192.168.1.5 from 192.168.1.14 UA: okhttp/4.9.2 Total Clients: 3 Feb 21 20:43:16 volumio volumio[918]: info: Feb 21 20:43:16 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:16 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:16 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:16 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:16 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:16 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:16 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:16 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:16 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:16 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:16 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:16 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:16 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:16 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:16 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:16 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:16 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:16 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:16 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:16 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:16 volumio kernel: usb 1-1.3: USB disconnect, device number 42 Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: appearance , isLatestTOSAccepted Feb 21 20:43:16 volumio systemd-udevd[246]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:16 volumio volumio[918]: verbose: New Socket.io Connection to 192.168.1.5 from 192.168.1.14 UA: okhttp/4.9.2 Total Clients: 4 Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::volumioGetVisibleSources Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:16 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Feb 21 20:43:16 volumio volumio[918]: info: Received Get System Info Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Feb 21 20:43:16 volumio volumio[918]: info: Discovery: Getting this device information Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:16 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:16 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:16 volumio volumio[918]: info: Listing playlists Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:16 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:16 volumio volumio[918]: info: Feb 21 20:43:16 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:16 volumio volumio[918]: info: Feb 21 20:43:16 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:16 volumio kernel: usb 1-1.3: new high-speed USB device number 43 using xhci_hcd Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Feb 21 20:43:16 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Feb 21 20:43:16 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:16 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:17 volumio kernel: usb 1-1.3: device not accepting address 43, error -71 Feb 21 20:43:17 volumio sudo[968]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:17 volumio kernel: usb 1-1.3: new high-speed USB device number 44 using xhci_hcd Feb 21 20:43:17 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:17 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:17 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:17 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:17 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:17 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:17 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:17 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:17 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:17 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:17 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:17 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:17 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:17 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:17 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:17 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:17 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:17 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:17 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:17 volumio kernel: usb 1-1.3: USB disconnect, device number 44 Feb 21 20:43:17 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:17 volumio volumio[918]: info: Feb 21 20:43:17 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:17 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:17 volumio volumio[918]: info: Feb 21 20:43:17 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:17 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:17 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:17 volumio kernel: usb 1-1.3: new high-speed USB device number 45 using xhci_hcd Feb 21 20:43:18 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:18 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:18 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:18 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:18 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:18 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:18 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:18 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:18 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:18 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:18 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:18 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:18 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:18 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:18 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:43:18 volumio volumio[918]: info: Feb 21 20:43:18 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:18 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:18 volumio kernel: usb 1-1.3: USB disconnect, device number 45 Feb 21 20:43:18 volumio volumio[918]: info: Feb 21 20:43:18 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:18 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:18 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:18 volumio kernel: usb 1-1.3: new high-speed USB device number 46 using xhci_hcd Feb 21 20:43:18 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:18 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:19 volumio kernel: usb 1-1.3: device not accepting address 46, error -71 Feb 21 20:43:19 volumio kernel: usb 1-1.3: new high-speed USB device number 47 using xhci_hcd Feb 21 20:43:19 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:19 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:19 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:19 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:19 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:19 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:19 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:19 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:19 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:19 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:19 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:19 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:19 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:19 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:19 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:19 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:19 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:19 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:19 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:19 volumio kernel: usb 1-1.3: USB disconnect, device number 47 Feb 21 20:43:19 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:19 volumio volumio[918]: info: Feb 21 20:43:19 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:19 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:19 volumio volumio[918]: info: Feb 21 20:43:19 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:19 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:19 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:20 volumio kernel: usb 1-1.3: new high-speed USB device number 48 using xhci_hcd Feb 21 20:43:20 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:20 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:20 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:20 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:20 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:20 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:20 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:20 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:20 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:20 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:20 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:20 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:20 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:20 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:20 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:43:20 volumio volumio[918]: info: Feb 21 20:43:20 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:20 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:20 volumio kernel: usb 1-1.3: USB disconnect, device number 48 Feb 21 20:43:20 volumio volumio[918]: info: Feb 21 20:43:20 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:20 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:20 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:20 volumio kernel: usb 1-1.3: new high-speed USB device number 49 using xhci_hcd Feb 21 20:43:20 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:20 volumio systemd[1]: systemd-fsckd.service: Succeeded. Feb 21 20:43:20 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:21 volumio kernel: usb 1-1.3: device not accepting address 49, error -71 Feb 21 20:43:21 volumio kernel: usb 1-1.3: new high-speed USB device number 50 using xhci_hcd Feb 21 20:43:21 volumio sh[406]: timed out Feb 21 20:43:21 volumio dhcpcd[455]: timed out Feb 21 20:43:21 volumio sh[406]: dhcpcd exited Feb 21 20:43:21 volumio dhcpcd[455]: dhcpcd exited Feb 21 20:43:21 volumio sh[406]: ifup: failed to bring up eth0 Feb 21 20:43:21 volumio systemd[1]: ifup@eth0.service: Main process exited, code=exited, status=1/FAILURE Feb 21 20:43:21 volumio systemd[1]: ifup@eth0.service: Failed with result 'exit-code'. Feb 21 20:43:21 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:21 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:21 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:21 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:21 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:21 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:21 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:21 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:21 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:21 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:21 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:21 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:21 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:21 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:21 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:21 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:21 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:21 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:21 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:21 volumio kernel: usb 1-1.3: USB disconnect, device number 50 Feb 21 20:43:21 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:21 volumio volumio[918]: info: Feb 21 20:43:21 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:21 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:21 volumio volumio[918]: info: Feb 21 20:43:21 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:21 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:21 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:22 volumio kernel: usb 1-1.3: new high-speed USB device number 51 using xhci_hcd Feb 21 20:43:22 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:22 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:22 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:22 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:22 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:22 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:22 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:22 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:22 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:22 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:22 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:22 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:22 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:22 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:22 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:43:22 volumio volumio[918]: info: Feb 21 20:43:22 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:22 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:22 volumio kernel: usb 1-1.3: USB disconnect, device number 51 Feb 21 20:43:22 volumio volumio[918]: info: Feb 21 20:43:22 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:22 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:22 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:22 volumio kernel: usb 1-1.3: new high-speed USB device number 52 using xhci_hcd Feb 21 20:43:22 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:22 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:23 volumio kernel: usb 1-1.3: device not accepting address 52, error -71 Feb 21 20:43:23 volumio kernel: usb 1-1.3: new high-speed USB device number 53 using xhci_hcd Feb 21 20:43:23 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:23 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:23 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:23 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:23 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:23 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:23 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:23 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:23 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:23 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:23 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:23 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:23 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:23 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:23 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:23 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:23 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:23 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:23 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:23 volumio kernel: usb 1-1.3: USB disconnect, device number 53 Feb 21 20:43:23 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:23 volumio volumio[918]: info: Feb 21 20:43:23 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:23 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:23 volumio sudo[1139]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Feb 21 20:43:23 volumio sudo[1139]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:23 volumio sudo[1139]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:23 volumio sudo[1138]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Feb 21 20:43:23 volumio sudo[1138]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:23 volumio sudo[1138]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:23 volumio sudo[1144]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start upmpdcli.service Feb 21 20:43:23 volumio sudo[1144]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:23 volumio volumio[918]: info: Feb 21 20:43:23 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:23 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:23 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Feb 21 20:43:24 volumio volumio[918]: info: Discovery: Getting this device information Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:24 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Feb 21 20:43:24 volumio volumio[918]: verbose: New Socket.io Connection to 192.168.1.5 from 192.168.1.14 UA: okhttp/4.9.2 Total Clients: 3 Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:24 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:24 volumio systemd[1]: Started UPnP Renderer front-end to MPD. Feb 21 20:43:24 volumio sudo[1144]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: wizard , getShowWizard Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getShowWizard Feb 21 20:43:24 volumio volumio[918]: info: Upmpdcli Daemon Started Feb 21 20:43:24 volumio volumio[918]: error: Upnp client error: Error: connect ECONNREFUSED 127.0.0.1:6600 Feb 21 20:43:24 volumio kernel: usb 1-1.3: new high-speed USB device number 54 using xhci_hcd Feb 21 20:43:24 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:24 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:24 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:24 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:24 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:24 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:24 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:24 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:24 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:24 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:24 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:24 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:24 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:24 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio systemd[1]: systemd-hostnamed.service: Succeeded. Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:24 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:43:24 volumio volumio[918]: info: Feb 21 20:43:24 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:24 volumio kernel: usb 1-1.3: USB disconnect, device number 54 Feb 21 20:43:24 volumio volumio[918]: info: Feb 21 20:43:24 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:24 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:24 volumio kernel: usb 1-1.3: new high-speed USB device number 55 using xhci_hcd Feb 21 20:43:25 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:43:25 volumio sudo[1160]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0 Feb 21 20:43:25 volumio sudo[1160]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:25 volumio sudo[1160]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:25 volumio sudo[1162]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig wlan0 Feb 21 20:43:25 volumio sudo[1162]: pam_unix(sudo:session): session opened for user root by (uid=0) Feb 21 20:43:25 volumio sudo[1162]: pam_unix(sudo:session): session closed for user root Feb 21 20:43:25 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:43:25 volumio volumio[918]: verbose: New Socket.io Connection to 192.168.1.5 from 192.168.1.14 UA: okhttp/4.9.2 Total Clients: 4 Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: appearance , isLatestTOSAccepted Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getAutoUpdateCheckEnabled Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::volumioGetVisibleSources Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: my_music , getDisabledSources Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:25 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: metavolumio , getInfinityPlayback Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: multiroom , getMultiroom Feb 21 20:43:25 volumio volumio[918]: info: Received Get System Info Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Feb 21 20:43:25 volumio volumio[918]: info: Discovery: Getting this device information Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:25 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:25 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:25 volumio volumio[918]: info: Listing playlists Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: appearance , getUiSettings Feb 21 20:43:25 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getPrivacySettings Feb 21 20:43:25 volumio kernel: usb 1-1.3: new high-speed USB device number 56 using xhci_hcd Feb 21 20:43:26 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:26 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:26 volumio kernel: usb 1-1.3: device not accepting address 56, error -71 Feb 21 20:43:26 volumio kernel: usb 1-1-port3: attempt power cycle Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: my_volumio , getMyVolumioStatus Feb 21 20:43:27 volumio volumio[918]: info: Received Get System Info Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: system , getSystemInfo Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: volumiodiscovery , getThisDevice Feb 21 20:43:27 volumio volumio[918]: info: Discovery: Getting this device information Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::volumioGetState Feb 21 20:43:27 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: network , getCachedIPAddresses Feb 21 20:43:27 volumio kernel: usb 1-1.3: new high-speed USB device number 57 using xhci_hcd Feb 21 20:43:27 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:27 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:27 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:27 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:27 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:27 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:27 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:27 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:27 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:27 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:27 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:27 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:27 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:27 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:27 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:27 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:27 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:27 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:27 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:27 volumio kernel: usb 1-1.3: USB disconnect, device number 57 Feb 21 20:43:27 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:27 volumio volumio[918]: info: Feb 21 20:43:27 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:27 volumio volumio[918]: info: Feb 21 20:43:27 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:27 volumio volumio[918]: info: CoreCommandRouter::volumioPlay Feb 21 20:43:27 volumio volumio[918]: info: CoreStateMachine::play index undefined Feb 21 20:43:27 volumio volumio[918]: info: CoreStateMachine::setConsumeUpdateService undefined Feb 21 20:43:27 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:27 volumio volumio[918]: info: CoreStateMachine::startPlaybackTimer Feb 21 20:43:27 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:27 volumio volumio[918]: info: [1708548207998] ControllerUPNPBrowser::clearAddPlayTrack Feb 21 20:43:28 volumio volumio[918]: error: Upnp client error: Error: connect ECONNREFUSED 127.0.0.1:6600 Feb 21 20:43:28 volumio kernel: usb 1-1.3: new high-speed USB device number 58 using xhci_hcd Feb 21 20:43:28 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:43:29 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:43:29 volumio volumio[918]: info: CoreCommandRouter::volumioPlay Feb 21 20:43:29 volumio volumio[918]: info: CoreStateMachine::play index undefined Feb 21 20:43:29 volumio volumio[918]: info: CoreStateMachine::setConsumeUpdateService undefined Feb 21 20:43:29 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:29 volumio volumio[918]: info: CoreStateMachine::startPlaybackTimer Feb 21 20:43:29 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:29 volumio volumio[918]: info: [1708548209693] ControllerUPNPBrowser::clearAddPlayTrack Feb 21 20:43:29 volumio kernel: usb 1-1.3: new high-speed USB device number 59 using xhci_hcd Feb 21 20:43:30 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:30 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:30 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:30 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:30 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:30 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:30 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:30 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:30 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:30 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:30 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:30 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:30 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:30 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:30 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:30 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:30 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:30 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:30 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:30 volumio kernel: usb 1-1.3: USB disconnect, device number 59 Feb 21 20:43:30 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:30 volumio volumio[918]: info: Feb 21 20:43:30 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:30 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:30 volumio volumio[918]: info: Feb 21 20:43:30 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:30 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:30 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:30 volumio kernel: usb 1-1.3: new high-speed USB device number 60 using xhci_hcd Feb 21 20:43:30 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:30 volumio kernel: usb 1-1.3: Device not responding to setup address. Feb 21 20:43:30 volumio kernel: usb 1-1.3: device not accepting address 60, error -71 Feb 21 20:43:31 volumio kernel: usb 1-1.3: new high-speed USB device number 61 using xhci_hcd Feb 21 20:43:31 volumio volumio[918]: info: CoreCommandRouter::volumioPlay Feb 21 20:43:31 volumio volumio[918]: info: CoreStateMachine::play index undefined Feb 21 20:43:31 volumio volumio[918]: info: CoreStateMachine::setConsumeUpdateService undefined Feb 21 20:43:31 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:31 volumio volumio[918]: info: CoreStateMachine::startPlaybackTimer Feb 21 20:43:31 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:31 volumio volumio[918]: info: [1708548211325] ControllerUPNPBrowser::clearAddPlayTrack Feb 21 20:43:31 volumio kernel: usb 1-1.3: device descriptor read/all, error -71 Feb 21 20:43:31 volumio kernel: usb 1-1-port3: attempt power cycle Feb 21 20:43:32 volumio kernel: usb 1-1.3: new high-speed USB device number 62 using xhci_hcd Feb 21 20:43:32 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:32 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:32 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:32 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:32 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:32 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:32 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:32 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:32 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:32 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:32 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: USB disconnect, device number 62 Feb 21 20:43:32 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:32 volumio volumio[918]: info: Feb 21 20:43:32 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:32 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:32 volumio volumio[918]: info: Feb 21 20:43:32 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:32 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:32 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:32 volumio kernel: usb 1-1.3: new high-speed USB device number 63 using xhci_hcd Feb 21 20:43:32 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:32 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:32 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:32 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:32 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:32 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:32 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:32 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:32 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:32 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:32 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:32 volumio systemd-udevd[237]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 5' failed with exit code 99. Feb 21 20:43:32 volumio volumio[918]: info: Feb 21 20:43:32 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:32 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:32 volumio kernel: usb 1-1.3: USB disconnect, device number 63 Feb 21 20:43:32 volumio volumio[918]: info: Feb 21 20:43:32 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:32 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:32 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:33 volumio kernel: usb 1-1.3: new high-speed USB device number 64 using xhci_hcd Feb 21 20:43:33 volumio kernel: usb 1-1.3: device descriptor read/all, error -71 Feb 21 20:43:33 volumio kernel: usb 1-1.3: new high-speed USB device number 65 using xhci_hcd Feb 21 20:43:33 volumio kernel: usb 1-1.3: New USB device found, idVendor=1511, idProduct=0062, bcdDevice= 6.f2 Feb 21 20:43:33 volumio kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Feb 21 20:43:33 volumio kernel: usb 1-1.3: Product: ALTAIR G1 USB Audio 2.0 Feb 21 20:43:33 volumio kernel: usb 1-1.3: Manufacturer: AURALiC Feb 21 20:43:33 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:33 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:33 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:33 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:33 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:33 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:33 volumio kernel: usb 1-1.3: 1:3 : unsupported format bits 0x100000000 Feb 21 20:43:33 volumio kernel: usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71) Feb 21 20:43:33 volumio kernel: usb 1-1.3: uac_clock_source_is_valid(): cannot get clock validity for id 41 Feb 21 20:43:33 volumio kernel: usb 1-1.3: clock source 41 is not valid, cannot use Feb 21 20:43:33 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 1 (-71) Feb 21 20:43:33 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 2 (-71) Feb 21 20:43:33 volumio kernel: usb 1-1.3: 10:0: failed to get current value for ch 0 (-71) Feb 21 20:43:33 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:33 volumio kernel: usb 1-1.3: 10:0: cannot get min/max values for control 2 (id 10) Feb 21 20:43:33 volumio kernel: usb 1-1.3: USB disconnect, device number 65 Feb 21 20:43:33 volumio systemd-udevd[237]: controlC5: Failed to open ATTR{/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card5/controlC5/../uevent} for writing: No such file or directory Feb 21 20:43:33 volumio volumio[918]: info: Feb 21 20:43:33 volumio volumio[918]: ---------------------------- USB Audio Device Attached Feb 21 20:43:33 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioAttach Feb 21 20:43:34 volumio volumio[918]: info: Feb 21 20:43:34 volumio volumio[918]: ---------------------------- USB Audio Device Detached Feb 21 20:43:34 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: alsa_controller , usbAudioDetach Feb 21 20:43:34 volumio volumio[918]: info: CoreCommandRouter::executeOnPlugin: i2s_dacs , getI2sStatus Feb 21 20:43:34 volumio volumio[918]: error: Upnp client error: Error: connect ECONNREFUSED 127.0.0.1:6600 Feb 21 20:43:34 volumio kernel: usb 1-1.3: new high-speed USB device number 66 using xhci_hcd Feb 21 20:43:34 volumio volumio[918]: info: CorePlayQueue::getTrack 0 Feb 21 20:43:34 volumio volumio[918]: info: CorePlayQueue::getTrack 1 Feb 21 20:43:34 volumio volumio[918]: info: Prefetching next song Feb 21 20:43:34 volumio volumio[918]: info: Doing Prefetch in UPNP Feb 21 20:43:34 volumio volumio[918]: |||||||||||||||||||||||| WARNING: FATAL ERROR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Feb 21 20:43:34 volumio volumio[918]: TypeError: Cannot read property 'sendMpdCommand' of undefined Feb 21 20:43:34 volumio volumio[918]: at ControllerUPNPBrowser.prefetch (/volumio/app/plugins/music_service/upnp_browser/index.js:651:25) Feb 21 20:43:34 volumio volumio[918]: at CoreStateMachine.increasePlaybackTimer (/volumio/app/statemachine.js:453:18) Feb 21 20:43:34 volumio volumio[918]: at listOnTimeout (internal/timers.js:554:17) Feb 21 20:43:34 volumio volumio[918]: at processTimers (internal/timers.js:497:7) Feb 21 20:43:34 volumio volumio[918]: ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Feb 21 20:43:34 volumio kernel: usb 1-1.3: device descriptor read/64, error -71 Feb 21 20:43:34 volumio sudo[1209]: volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/journalctl --since=2024-02-21 20:42 Feb 21 20:43:34 volumio sudo[1209]: pam_unix(sudo:session): session opened for user root by (uid=0) PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" VOLUMIO_BUILD_VERSION="7f9f1bf001add7a8b19a4516e3c74ef598b2730d" VOLUMIO_FE_VERSION="614d7b13ffdcb0cc5a6072e7d06f59d52e323e71" VOLUMIO_FE3_VERSION="570aaed971c1346d45d1172dc445b086b258c6d1" VOLUMIO_BE_VERSION="512433c3e91cdaed7ecd2808b21adeffc2137d7f" VOLUMIO_ARCH="arm" VOLUMIO_VARIANT="volumio" VOLUMIO_TEST="FALSE" VOLUMIO_BUILD_DATE="Wed 21 Feb 2024 09:37:22 PM CET" VOLUMIO_VERSION="3.631" VOLUMIO_HARDWARE="pi" VOLUMIO_DEVICENAME="Raspberry Pi" VOLUMIO_HASH="fdd9dd1169c06c1ad0a30ddd24c91b6b"